Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Tracking nuclear wave-packet dynamics in molecular oxygen ions with few-cycle infrared laser pulses

We have tracked nuclear wave-packet dynamics in doubly charged states of molecular oxygen using few-cycle infrared laser pulses. Bound and dissociating wave packets were launched and subsequently probed via a pair of 8-fs pulses of 790 nm radiation. Ionic fragments from the dissociating molecules were monitored by velocity-map imaging. Pronounced oscillations in the delay-dependent kinetic energy release spectra were observed. The occurrence of vibrational revivals permits us to identify the potential curves of the O{sub 2} dication which are most relevant to the molecular dynamics. These studies show the accessibility to the dynamics of such higher-charged molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

500-MHz x-ray counting with a Si-APD and a fast-pulse processing system

We introduce a counting system of up to 500 MHz for synchrotron x-ray high-rate measurements. A silicon avalanche photodiode detector was used in the counting system. The fast-pulse circuit of the amplifier was designed with hybrid ICs to prepare an ASIC system for a large-scale pixel array detector in near future. The fast amplifier consists of two cascading emitter-followers using 10-GHz band transistors. A count-rate of 3.25x10{sup 8} s{sup -1} was then achieved using the system for 8-keV x-rays. However, a baseline shift by adopting AC-coupling in the amplifier disturbed us to observe the maximum count of 4.49x10{sup 8} s{sup -1}, determined by electron-bunch filling into a ring accelerator. We also report that an amplifier with a baseline restorer was tested in order to keep the baseline level to be 0 V even at high input rates.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiphoton ionization of the calcium atom by linearly and circularly polarized laser fields

We theoretically study multiphoton ionization of the Ca atom irradiated by the second (photon energy 3.1 eV) and third (photon energy 4.65 eV) harmonics of Ti:sapphire laser pulses (photon energy 1.55 eV). Because of the dense energy level structure the second and third harmonics of a Ti:sapphire laser are nearly single-photon resonant with the 4s4p {sup 1}P{sup o} and 4s5p {sup 1}P{sup o} states, respectively. Although two-photon ionization takes place through the near-resonant intermediate states with the same symmetry in both cases, it turns out that there are significant differences between them. The photoelectron energy spectra exhibit the absence or presence of substructures. More interestingly, the photoelectron angular distributions clearly show that the main contribution to the ionization processes by the third harmonic arises from the far-off-resonant 4s4p {sup 1}P{sup o} state rather than the near-resonant 4s5p {sup 1}P{sup o} state. These findings can be attributed to the fact that the dipole moment for the 4s{sup 2} {sup 1}S{sup e}-4s5p {sup 1}P{sup o} transition is much smaller than that for the 4s{sup 2} {sup 1}S{sup e}-4s4p {sup 1}P{sup o} transition.

74 ATOMIC AND MOLECULAR PHYSICS↗

Higher Order Modes Damping and Multipacting Analysis for the SPX Deflecting Cavity in APS Upgrade

A single-cell superconducting deflecting cavity operating at 2.815 GHz has been proposed and designed for the Short Pulse X-ray (SPX) project for the Advanced Photon Source (APS) upgrade. Each deflecting cavity is equipped with one fundamental power coupler (FPC), one lower order mode (LOM) coupler, and two higher order mode (HOM) couplers to achieve the stringent damping requirements for the unwanted modes. Using the electromagnetic simulation suite ACE3P, HOM damping will be calculated for the cavity including the full engineering design waveguide configurations and rf windows. Trapped modes in the bellows located in the beampipes connecting the cavities in a cryomodule will be computed and their effects on heating evaluated. Furthermore, multipacting activities at the end groups of the cavity will be identified to assess possible problems during high power processing.

Li, Z.↗

Ion beam-assisted pulsed laser deposition of (Ba,Sr)(Ti,Zr)O{sub 3} films on Pt-Si substrates

Ion beam-assisted pulsed laser deposition with an Ar-oxygen ion mixture was used to prepare Ba{sub 0.6}Sr{sub 0.4}Ti{sub 0.7}Zr{sub 0.3}O{sub 3} (BSTZ) thin films on Pt-coated Si substrates. The ion beam with an anode voltage of 600 V was effective to reduce the thermal budget, i.e., to achieve similar crystallinity with approximately 100 deg. C lower deposition temperature compared to the cases without ionization. It was revealed that the dielectric properties (relative dielectric constant {epsilon}{sub r} and its electric field tunability), out-of-plane lattice parameter of (001)-oriented grains (a{sub 001}), and the existence of (110)-oriented grains are correlated with one another. Elongation of a{sub 001} was suppressed, resulting in large {epsilon}{sub r} values comparable with that of a ceramic bulk of the same composition, in the BSTZ films that contain (110)-oriented grains. Less volume of amorphous BSTZ region is supposed to be playing an important role for the bulklike properties of these BSTZ films.

36 MATERIALS SCIENCE↗

In situ optical emission study on the role of C{sub 2} in the synthesis of single-walled carbon nanotubes

In situ optical emission spectroscopy was used to study the temporal and spatial behavior of laser induced plasmas in the laser-furnace synthesis of single-walled carbon nanotubes (SWCNTs). A graphite composite target located within a sealed quartz tube with a chemical stoichiometric composition of 95:4:1 at. wt % of carbon, yttrium, and nickel, respectively, was ablated by a Q-switched Nd:YAG laser delivering colinear, focused laser pulses of 1064 and 532 nm temporarily separated by 20 ns. The ablation process was done at a furnace temperature of 1273 K in a flow of argon gas at either 150 or 200 SCCM (SCCM denotes cubic centimeter per minute at STP). The pressure was varied (100, 400, and 600 Torr) for each gas flow setting. The temporal and spatial behavior of the emission intensity associated with C{sub 2} Swan bands (d {sup 3{Pi}}{sub g}-a {sup 3{Pi}}{sub u}) was investigated and found to be influenced by the pressure and flow rate of the argon gas. At conditions optimal to SWCNT production, a sharp drop in C{sub 2} intensity followed by a rise in C{sub 2} intensity was observed. The temporal and spatial behavior of the electron density was determined by the Stark broadening profile of the CII emission peak at 283.7 nm and was found to decrease with the adiabatic expansion of the plume. We propose that the sharp drop in C{sub 2} intensity and the rise in electron density and electron temperature observed in this study are due to the accompanying rapid nucleation and growth of SWCNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fast Decompression Of Ultra-Thin Targets For High-Energy, High-Contrast Laser Pulses

In the laser-plasma interaction process, for ultra-high temporal contrast laser pulses, experimental measurements show that reducing the thickness of solid targets increases the laser-to-fast electrons energy conversion and the hot electron temperature. We have performed an experiment using the LULI 100 TW laser facility working in the chirped pulse amplification (CPA) mode at a wavelength {lambda}{sub 0} = 1.057 {mu}m, pulse duration 320 fs, laser spot size FWHM {approx}6 {mu}m and intensity {approx}1x10{sup 18} W/cm{sup 2} in which the laser pulses were temporal-contrast enhanced by the use of two plasma mirrors. Shots were performed on Si{sub 3}N{sub 4} aluminum coated targets of thickness 30 nm to 500 nm. Spectra of the laser-accelerated electrons were recorded with a spectrometer and are compared to PIC simulations performed with the CALDER code. The simulations allow an insight into the electron heating process during the laser-matter interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray Emission from Electron Betatron Motion in a Laser-Plasma Accelerator

Single-shot x-ray spectra from electron bunches produced by a laser-plasma wakefield accelerator (LPA) were measured using a photon-counting single-shot pixelated Silicon-based detector [3], providing for the first time direct spectra without assumptions required by filter based techniques. In addition, the electron bunch source size was measured by imaging a wire target, demonstrating few micron source size and stability. X-rays are generated when trapped electrons oscillate in the focusing field of the wake trailing the driver laser pulse. In addition to improving understanding of bunch emittance and wake structure, this provides a broadband, synchronized femtosecond source of keV x-rays. Electron bunch spectra and divergence were measured simultaneously and preliminary analysis shows correlation between x-ray andelectron spectra. Bremsstrahlung background was managed using shielding and magnetic diversion.

43 PARTICLE ACCELERATORS↗

A panoply of insertion devices at SOLEIL for a wide spectral range and flexible polarisation

The SOLEIL storage ring presents a very high fraction of its circumference dedicated to accommodate Insertion Devices (ID). Over the 25 presently planned insertion devices presenting a large variety of systems, 16 have been already installed and commissioned in September 2009. The UV-VUV region is covered with electromagnetic devices, offering tuneable polarisations. An electromagnet/permanent magnet undulator using copper sheets coils for fast switching of the helicity is under construction. 13 APPLE-II type undulators, with period ranging from 80 down to 36 mm, provide photons in the 0.1-10 keV region, some of them featuring tapering or quasi-periodicity. Five U20 in vacuum undulators cover typically the 3-30 keV range whereas an in vacuum wiggler, with compensation of the magnetic forces via adequate springs will cover the 10-50 keV spectral domain. R and D on cryogenic in-vacuum undulator is also under progress. A magnetic chicane using permanent magnet dipoles has also been designed in order to accommodate two canted undulators on the same straight section. A wiggler dedicated to slicing (production of femto second long pulses) is also being designed, its radiation will also serve for an X-ray beamline.

43 PARTICLE ACCELERATORS↗

Formation of epitaxial metastable NiGe{sub 2} thin film on Ge(100) by pulsed excimer laser anneal

Epitaxial nickel digermanide (NiGe{sub 2}), a metastable phase, was formed by laser annealing Ni on (100) germanium-on-silicon substrates. The NiGe{sub 2} formation was investigated using transmission electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction, Rutherford backscattering spectroscopy, and first-principles calculations. The formation mechanism of NiGe{sub 2} is discussed and is attributed to both the reduced interfacial energy at the NiGe{sub 2}/Ge(100) interface and the kinetic aspects of the laser annealing reaction associated with phase transformation and film agglomeration.

36 MATERIALS SCIENCE↗

Vibrationally cold CO{sup 2+} in intense ultrashort laser pulses

By virtue of the short lifetime of excited states, we have performed three-dimensional (3D) momentum imaging on the fragments from an electronically and vibrationally cold metastable CO{sup 2+} beam following irradiation by intense ultrashort laser pulses. This unique target can be described as a two-channel system, since most low-lying electronic states are not accessible by dipole transitions due to their spin state. Laser excitation between the ground X{sup 3{Pi}} v=0 state and the excited {sup 3{Sigma}-} state leads to bond softening and above-threshold dissociation, with peaks in kinetic energy release spaced by the photon energy and interesting angular distributions that peak perpendicular to the laser field. These results are compared with our solutions of the 3D time-dependent Schroedinger equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitational energy transfer enhancing ionization and spatial-temporal evolution of air breakdown with UV laser radiation

This paper examines the role multiphoton excitation of oxygen has on the ionization of nitrogen in laser air breakdown. Plasma is created by focusing a 193 nm ArF excimer laser using an 18 cm focal length lens, producing a cylindrical 540 {mu}m wide spot of intensity 6.5 GW/cm{sup 2}, well below the classical limit for collisional cascade (CC) breakdown. By spectroscopically monitoring the B {sup 2{Sigma}}{sub u}{sup +} to X {sup 2{Sigma}}{sub g}{sup +} transition at 391.4 nm of N{sub 2}{sup +} in N{sub 2} and O{sub 2} mixes, collisions between N{sub 2} and metastable O{sub 2} states that have undergone 1+1 absorption processes are shown to lower the degree of nonlinearity (i.e., the number of photons involved in the rate limiting multiphoton absorption process) in the ionization of N{sub 2}. This process is also found to dominate the 2+1 resonant enhanced multiphoton ionization of N{sub 2} in air and be the primary source for ionization of N{sub 2} to the B {sup 2{Sigma}}{sub u}{sup +} state. Plasma formation and evolution is also examined using a 1.3 cm focal length objective lens creating a 40 {mu}m wide spot of intensity 1.25 TW/cm{sup 2}, above the classical limit for breakdown. This plasma is imaged with a fast (1.2 ns) gating intensified charge coupled device camera. Early plasma formation is seen to be inhomogeneous in nature, and significant ion density is found to exist up to 20 {mu}s after the laser pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Finite beta effects on low- and high-frequency magnetosonic waves in a two-ion-species plasma

A magnetosonic wave propagating perpendicular to a magnetic field in a two-ion-species plasma has two branches, high-frequency and low-frequency modes. The finite beta effects on these modes are analyzed theoretically on the basis of the three-fluid model with finite ion and electron pressures. First, it is shown that the Korteweg-de Vries (KdV) equation for the low-frequency mode is valid for amplitudes ε<ε{sub max}, where the upper limit of the amplitude ε{sub max} is given as a function of β (β is the ratio of the kinetic and magnetic energy densities), the density ratio, and the cyclotron frequency ratio of two ion species. Next, the linear dispersion relation and KdV equation for the high-frequency mode are derived, including β as a factor. In addition, the theory for heavy ion acceleration by the high-frequency mode pulse and the pulse damping due to this energy transfer in a finite beta plasma are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A RADIO PULSAR SEARCH OF THE {gamma}-RAY BINARIES LS I +61 303 AND LS 5039

LS I +61 303 and LS 5039 are exceptionally rare examples of high-mass X-ray binaries with MeV-TeV emission, making them two of only five known '{gamma}-ray binaries'. There has been disagreement within the literature over whether these systems are microquasars, with stellar winds accreting onto a compact object to produce high energy emission and relativistic jets, or whether their emission properties might be better explained by a relativistic pulsar wind colliding with the stellar wind. Here we present an attempt to detect radio pulsars in both systems with the Green Bank Telescope. The upper limits of flux density are between 4.1 and 14.5 {mu}Jy, and we discuss the null results of the search. Our spherically symmetric model of the wind of LS 5039 demonstrates that any pulsar emission will be strongly absorbed by the dense wind unless there is an evacuated region formed by a relativistic colliding wind shock. LS I +61 303 contains a rapidly rotating Be star whose wind is concentrated near the stellar equator. As long as the pulsar is not eclipsed by the circumstellar disk or viewed through the densest wind regions, detecting pulsed emission may be possible during part of the orbit.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimization of La{sub 0.7}Ba{sub 0.3}MnO{sub 3-{delta}} complex oxide laser ablation conditions by plume imaging and optical emission spectroscopy

The properties of thin films of complex oxides, such as La{sub 1-x}D{sub x}MnO{sub 3-{delta}} (D=Ba, Ca, Sr, etc.), produced by pulsed laser deposition depend critically on the experimental parameters in which laser ablation is carried out. Here, we report a comparative analysis of the pulsed laser ablation process of La{sub 0.7}Ba{sub 0.3}MnO{sub 3-{delta}}, in oxygen background, in the ambient pressure range from 10{sup -2} to 1 mbar, typically employed in pulsed laser deposition of manganites. The laser ablation plume was studied by using time-gated imaging and optical emission spectroscopy techniques. It was found that at a pressure of {approx_equal}10{sup -2} mbar, the plume species arriving at the substrate are characterized by hyperthermal kinetic energy ({approx_equal}10 eV), and high degree of excitation. On the contrary, at larger oxygen pressure (0.1-1 mbar), the velocity of plume species reaching the substrate, and their degree of excitation are much reduced by the confining effects of the background gas. These features explain why an appropriate choice of the experimental conditions in which the deposition process is carried out leads to better quality films, providing helpful indications to improve control over the growth process of both La{sub 1-x}D{sub x}MnO{sub 3-{delta}} and other perovskitic oxides.

36 MATERIALS SCIENCE↗

Interaction of vacuum ultraviolet excimer laser radiation with fused silica: II. Neutral atom and molecule emission

We report mass-resolved time-of-flight measurements of neutral Si, O, and SiO from ultraviolet-grade fused silica during pulsed 157-nm irradiation at fluences well below the threshold for optical breakdown. Although the emission intensities are strongly affected by thermal treatments that affect the density of strained bonds in the lattice, they are not consistently affected by mechanical treatments that alter the density of point defects, such as polishing and abrasion. We propose that the absorption of single 157 nm photons cleave strained bonds to produce defects that subsequently diffuse to the surface. There they react with dangling bonds to release neutral atoms and molecules. Hartree-Fock calculations on clusters containing these defects support the contention that defect interactions can yield emission. More direct emission by the photoelectronic excitation of antibonding chemical states is also supported.

36 MATERIALS SCIENCE↗

Effect of epitaxial strain on the magneto-electric coupling of YMnO{sub 3} thin films

We report synthesis of phase pure multiferroic YMnO{sub 3} thin films on sapphire (0001) with conducting ZnGaO buffer contact layer. Films were prepared by using pulsed laser deposition technique and characterized using x-ray diffraction, scanning electron microscopy, energy dispersive absorption spectroscopy, and magnetic field dependent dielectric measurement techniques. Structural characterizations indicated phase purity and epitaxial nature of the films. The dielectric response indicated an anomaly in dielectric constant epsilon and tan delta in the vicinity of 30 K, well below the bulk Neel temperature approx70 K. This anomaly in epsilon and tan delta and its magnetic field dependence is explained as an influence of strain due to lattice mismatch between the substrate and YMnO{sub 3} film. A substantial enhancement in magnetocapacitance was also observed for magnetic field applied parallel to ab plane of the film. Our results show that it is possible to tune the multiferroic property of YMnO{sub 3} via changes in ferroelastic route.

36 MATERIALS SCIENCE↗

Contact and Phase-Contrast Imaging of Nanostructures by Femtosecond-Laser-Driven-Cluster-Based Debris-Free Soft X-Ray Source

The high-intensive source of soft X-ray emission was developed by femtosecond laser pulses irradiation of submicron size CO{sub 2} clusters, produced in custom designed super-sonic nozzle while mixing the 10% CO{sub 2}+90% He expanding gases. The LiF crystal soft X-ray detectors have been used for obtaining absorption images of ultrathin (nanoscale) foils and biological structures illuminated by the developed source. It was demonstrated that even if the foil is essentially transparent for the soft X-ray radiation (like 100 nm thick Zr foil), the image contrast could be significantly increased due to the influence of propagation-based phase-contrast effect, by placing the detector at the proper distance from the sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗