Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Simulation of the subnanosecond cutoff of current in high-power semiconductor diodes

The subnanosecond cutoff of high-density current in the structure of a semiconductor opening-switch diode is investigated within a physico-mathematical model. The model takes into account the space charge and the effect of the electric field, temperature, electron-hole scattering, and scattering by ionized impurities on the carrier mobility. It is established that subnanosecond cutoff of current with a density of several kA/cm{sup 2} occurs at a p-n junction depth exceeding 180 {mu}m, forward pumping time less than 60 ns, and reverse pumping time less than 20 ns. This process is due to the formation of three high-field regions in the stage of current cutoff. Two regions, expanding with a nearly constant velocity, are located in the p region, and the third one, slowly expanding, is in the n region. It is shown that, to implement subnanosecond current cut-off, a set of conditions for the circuit parameters (determining the pump current duration and density) and the dopant profile in the semiconductor structure should be satisfied simultaneously. The simulation results are compared with the experimental data.

36 MATERIALS SCIENCE↗

Effect of the silicon doping level and features of nanostructural arrangement on decrease in external quantum efficiency in InGaN/GaN light-emitting diodes with increasing current

A comprehensive study of blue light-emitting diodes based on quantum-well InGaN/GaN structures with external quantum efficiencies {eta} of up to 40% has been carried out. It is shown that, in the general case, the manner in which the efficiency depends on the current density j is determined by the competition of contributions to the radiative recombination of localized and delocalized carriers. The contribution of the latter grows with worsening structural organization of the nanomaterial, increasing temperature and drive current, and decreasing width of the depleted layer in the active region (under zero bias). The steepest efficiency droop relative to the maximum value (by up to a factor of 2 at j Almost-Equal-To 50 A cm{sup -2}) is observed in the case of heavy doping of the n{sup +}-region (to 10{sup 19} cm{sup -3}) and upon appearance of compensated layers in the active or p{sup +}-region. At j > 50 A cm{sup -2}, the contribution of delocalized carriers is predominant and the current dependences of efficiency are of uniform type, approximated with {eta}(j) {proportional_to} j{sup -b}, where 0.2 < b < 0.3.

36 MATERIALS SCIENCE↗

Probability characteristics of electrical noise in heterojunction light-emitting diodes

A hardware-software complex for measurements of the characteristics of electrical and optical noise in light-emitting diodes (LEDs) in the frequency range from 1 to 40 kHz is described. The electrical noise of several types of heterojunction-based LEDs are studied; these types include red-emission LEDs with AlInGaP/GaAs quantum wells and the green- and blue-emission LEDs with AlInGaN/SiC quantum wells are studied by the method of discrete samples. The spectra of all studied LEDs in the frequency range from 1 to 10 kHz have the form 1/f{sup {gamma}}. It is noteworthy that, for red-emission LEDs, the exponent {gamma} is significantly smaller than unity; this index is close to unity for the green- and blue-emission LEDs. The characteristic time of correlation of the noise of red-emission LEDs by several times exceeds the correlation times for the blue- and green-emission LEDs. It is shown that reduced functions of the amplitude distribution of the noise voltage are close to Gaussian functions with almost the same dispersion for all LED types.

36 MATERIALS SCIENCE↗

Comparison of the properties of AlGaInN light-emitting diode chips of vertical and flip-chip design using silicon as the a submount

Vertical and flip-chip light-emitting diode (LED) chips are compared from the viewpoint of the behavior of current spreading in the active region and the distribution of local temperatures and thermal resistances of chips. AlGaInN LED chips of vertical design are fabricated using Si as a submount and LED flipchips were fabricated with the removal of a sapphire substrate. The latter are also mounted on a Si submount. The active regions of both chips are identical and are about 1 mm{sup 2} in size. It is shown that both the emittance of the crystal surface in the visible range and the distribution of local temperatures estimated from radiation in the infrared region are more uniform in crystals of vertical design. Heat removal from flip-chips is insufficient in regions of the n contact, which do not possess good thermal contact with the submount. As a result, the total thermal resistances between the p-n junction and the submount both for the vertical chips and for flip-chips are approximately 1 K/W. The total area of the flip-chips exceeds that of the vertical design chips by a factor of 1.4.

36 MATERIALS SCIENCE↗

Electrical phenomena in a metal/nanooxide/p{sup +}-silicon structure during its transformation to a resonant-tunneling diode

To investigate and develop novel silicon-based electronic components, the electro-physical effects in a metal-insulator-semiconductor (MIS) structure with nanometer size parameters, gained by enhancement of the silicon doping level up to N{sub A} {approx} 10{sup 19} cm{sup -3} and reduction of the oxide thickness down to 0.4-4.0 nm, have been studied. As a result of such changes, the MIS nanostructure satisfies necessary and sufficient conditions for the electron resonant tunneling that can be observed at relatively low (some volts) reverse biases. Thereby a MIS capacitor can be transformed into a resonant-tunneling diode with substantial extension of its properties and functions.

36 MATERIALS SCIENCE↗

Influence of temperature on the mechanism of carrier injection in light-emitting diodes based on InGaN/GaN multiple quantum wells

The experimental current-voltage characteristics and dependences of the external quantum yield on the current density of light-emitting diodes based on InGaN/GaN multiple quantum wells for the wide temperature range T = 10-400 K are presented. It is shown that, at low-temperatures T < 100 K, the injection of holes into the quantum wells occurs from localized acceptor states. The low-temperature injection of electrons into p-GaN occurs due to quasi-ballistic transport in the region of multiple quantum wells. An increase in temperature leads to an increase in the current which is governed by thermally activated hole and electron injection from the allowed bands of GaN.

36 MATERIALS SCIENCE↗

Circularly polarized electroluminescence of light-emitting InGaAs/GaAs (III, Mn)V diodes on the basis of structures with a tunneling barrier

The comparative investigation of circularly polarized electroluminescence in Zener diodes based on InGaAs/n-GaAs/n{sup +}-GaAs/GaMnAs and InGaAs/n-GaAs/n{sup +}-GaAs/GaMnSb is carried out. It is established that the circularly polarized electroluminescence is associated with the spin injection of electrons from a ferromagnetic semiconductor layer. The luminescence parameters are determined by the properties of these layers. It is shown that the ferromagnetic properties of the GaMnSb layer allow us to obtain circularly polarized emission at room temperature from InGaAs/n-GaAs/n{sup +}-GaAs/GaMnSb heterostructures.

36 MATERIALS SCIENCE↗

Effect of the dopant concentration on the luminescence properties of InGaAs/GaAs spin light-emitting diodes with a mn δ layer

The luminescence properties of light-emitting diodes based on GaAs/InGaAs heterostructures containing Mn-doped layers are studied. The dependences of the degree of electroluminescence circular polarization on the growth parameters, specifically, the Mn content and the hole concentration are obtained. A steady increase in the degree of electroluminescence circular polarization and in the Curie temperature of the ferromagnetic structure with increasing hole concentration is observed, and a change in sign of the degree of circular polarization under variations in the Mn content is revealed. The data are interpreted on the basis of well-known models of ferromagnetism in structures based on ferromagnetic semiconductors.

36 MATERIALS SCIENCE↗

Nanoheterostructures with improved parameters for high-speed and efficient plasmon-polariton light emitting Schottky diodes

As a result of theoretical and experimental analyses, the parameters of heterostructures with InAs quantum dots in a GaAs matrix are determined, which provide the development of high-speed and efficient plasmon-polariton near-infrared light-emitting Schottky diodes based on such structures. The quantum dots should be arranged on a heavily doped (to a dopant concentration of 10{sup 19} cm{sup –3}) GaAs buffer layer and be separated from the metal by a thin (10–30 nm thick) undoped GaAs cap layer. The interface between the metal (e.g., gold) and GaAs provides the efficient scattering of surface plasmon-polaritons to ordinary photons if it contains inhomogeneities shaped as metal-filled cavities with a characteristic size of ~30 nm and a surface concentration above 10{sup 10} cm{sup –2}.

36 MATERIALS SCIENCE↗

InGaN/GaN light-emitting diode microwires of submillimeter length

Microcrystalline wire-like InGaN/GaN light-emitting diodes designed as core–shell structures 400–600 μm in length are grown by metal–organic vapor-phase epitaxy on sapphire and silicon substrates. The technology of the titanium-nanolayer-induced ultrafast growth of nanowire and microwire crystals is used. As a current is passed through the microcrystals, an electroluminescence signal is observed in the blue–green spectral region.

36 MATERIALS SCIENCE↗

Mechanism and Behavior of the Light Flux Decrease in Light-Emitting Diodes Based on AlGaN/InGaN/GaN Structures with Quantum Wells upon Prolonged Direct-Current Flow of Various Densities

The mechanism of the light-flux decrease in light-emitting diodes based on AlGaN/InGaN/GaN heterostructures with quantum holes is determined. The light-flux decrease is associated with point-defect generation in the heterostructure active region due to interaction of the semiconductor lattice with hot carriers formed in the mode of deviation of the current–voltage characteristic from the exponential one. An analytical expression for the light-flux decrease upon prolonged current flow, which is confirmed by experimental results, is derived. It is shown that the behavior of the dependence of the light flux on the lifetime is strongly affected by the nonuniform distribution of indium in quantum wells.

36 MATERIALS SCIENCE↗

Tunneling Current in Oppositely Connected Schottky Diodes Formed by Contacts between Degenerate n-GaN and a Metal

The nonlinear behavior of the I–V characteristics of symmetric contacts between a metal and degenerate n-GaN, which form oppositely connected Schottky diodes, is investigated at free-carrier densities from 1.5 × 10{sup 19} to 2.0 × 10{sup 20} cm{sup –3} in GaN. It is demonstrated that, at an electron density of 2.0 × 10{sup 20} cm{sup –3}, the conductivity between metal (chromium) and GaN is implemented via electron tunneling and the resistivity of the Cr–GaN contact is 0.05 Ω mm. A method for determining the parameters of potential barriers from the I–V characteristics of symmetric opposite contacts is developed. The effect of pronounced nonuniformity of the current density and voltage distributions over the contact area at low contact resistivity is taken into account. The potential-barrier height for Cr–n{sup +}-GaN contacts is found to be 0.47 ± 0.04 eV.

36 MATERIALS SCIENCE↗

Application of the Locally Nonequilibrium Diffusion-Drift Cattaneo–Vernotte Model to the Calculation of Photocurrent Relaxation in Diode Structures under Subpicosecond Pulses of Ionizing Radiation

The excitation-relaxation process in electron–hole plasma upon exposure to ionizing radiation for a time shorter than the relaxation time of the mobile carrier energy and momentum is considered. By the example of the calculation of transient ionization processes in a silicon hyperhigh-frequency Schottky diode, local-equilibrium and local-nonequilibrium carrier transport models are compared. It is shown that the local-nonequilibrium model features a wider field of application for describing fast relaxation processes.

61 RADIATION PROTECTION AND DOSIMETRY↗

Current Noise and Efficiency Droop of Light-Emitting Diodes in Defect-Assisted Carrier Tunneling from an InGaN/GaN Quantum Well

The current dependences of the spectral noise density and quantum efficiency in green and blue light-emitting diodes with InGaN/GaN quantum wells (QWs) are measured. It is shown that the noise level greatly increases at high currents at which there is a quantum efficiency droop. The mechanism by which the current noise is formed is associated with hopping transport via the deep states of color centers in GaN across the n barrier of an InGaN/GaN QW. The source of the noise is the hopping resistance of the space-charge region, which limits the current of thermally activated electrons into the QW. The efficiency droop and the increase in noise level are attributed to a change in the electric-field direction near the QW at high injection levels and to an increase in the tunneling leakage of holes from the QW. It is shown that the experimental frequency-related noise spectra having the shape of a Lorentzian spectrum at the working currents are related to the frequency of hopping between deep centers near the InGaN/GaN QW and to Maxwell relaxation in the space-charge region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of High-Energy Electron Irradiation on Surge Currents in 4H-SiC JBS Schottky Diodes

The effect of irradiation with high-energy (0.9 MeV) electrons on surge currents in high-voltage (operating voltage 1700 V) 4H -SiC Schottky p-n diodes is studied in the microsecond range of the forward-current pulse duration. With increasing irradiation dose Φ, the hole injection threshold steadily grows, and the base-modulation level by minority carriers (holes) becomes lower. At Φ = 1.5 × 10{sup 16} cm{sup –2}, no hole injection is observed up to forward voltages of ~30 V and forward current densities of j ≈ 9000 A/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods for spin injection managing in InGaAs/GaAs/Al{sub 2}O{sub 3}/CoPt spin light-emitting diodes

Spin injection in CoPt/Al{sub 2}O{sub 3}/(Al)GaAs spin light-emitting diodes (SLEDs) was studied. The oscillations of the degree of circular polarization upon variation of a distance between the active region of the SLED and a CoPt ferromagnetic injector were observed. The oscillations depend neither on a SLED material (GaAs or AlGaAs), nor on the type of injected spin-polarized carriers (electrons and holes) and are related to the action of a perpendicular magnetic field on the injected spin-polarized carriers that causes their precession. During the transfer to the active region through a distance of 50–100 nm from the injector, a z–component of a spin changes a phase that is detected experimentally as the change in sign of the degree of circular polarization of luminescence. Conceivably, a source of the internal magnetic field leading to spin precession is the magnetic field of the nonuniformly magnetized CoPt contact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raising the Operating Temperature of (Ga,Mn)As/GaAs Spin Light Emitting Diodes by Applying Post-Growth Treatment

Abstract—Spin light emitting diodes (spin-LEDs) containing (Ga,Mn)As ferromagnetic layers are fabricated based on InGaAs/GaAs heterostructures and studied. We achieve increases in the operating temperatures of our spin-LEDs by subjecting the surface of the structures, prior to depositing an ohmic metal contact, to pulsed laser annealing. The fabricated devices produce circularly polarized electroluminescence when placed in an external magnetic field. The temperatures at which circularly polarized electroluminescence is still observed is raised from 30 K for unprocessed structure to 110 K for laser-annealed structures. The observed effect is linked to an increase in the Curie temperature of the (Ga,Mn)As layer as a result of laser impact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Air Pressure on Parameters of Beam Current and X-Ray Radiation Generated in a Gas Diode

Parameters of a beam of runaway electrons and X-ray radiation generated in a gas diode at different atmospheric pressures are studied. It is shown that the maximum beam currents and intensities of X-ray radiation are generated at an air pressure of about 10{sup 2} Pa. Distribution of beam electrons with respect to energy is determined by the method of attenuation of beam current using aluminum filters with different thicknesses. The maximum of such a distribution corresponds to an electron energy of about 100 keV. The maximum exposure dose of X-ray radiation behind a copper-foil anode with a thickness of 30 μm is about 107 mR. It is shown that the beam electrons absorbed by elements of an X-ray detector affect the shape and amplitude of the desired signal at beam currents of greater than 35 A/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗