Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Measuring time-dependent diffusion in polymer matrix composites

Moisture plays a significant role in influencing the mechanical behavior and long-term durability of polymer matrix composites (PMC’s). The common methods used to determine the moisture diffusion coefficients of PMCs are based on the solution of Fickian diffusion in the one-dimensional domain. Fick’s Law assumes that equilibrium between the material surface and the external vapor is established instantaneously. A time dependent boundary condition has been shown to improve correlation with some bulk diffusion measurements, but has not been validated experimentally. The surface moisture content in a Toray 800S/3900-2B toughened quasi-isotropic laminate system, [0/±60]s, was analyzed experimentally using Nuclear Reaction Analysis (NRA). It was found that the surface moisture content showed a rapid increase to an intermediate concentration C0, followed by a slow linear increase to the saturation level.

composites↗

Predicting Fluid Flow Regime, Permeability, and Diffusivity in Mudrocks from Multiscale Pore Characterisation

In geoenergy applications, mudrocks prevent fluids to leak from temporary (H 2 , CH 4 ) or permanent (CO 2 , radioactive waste) storage/disposal sites and serve as a source and reservoir for unconventional oil and gas. Understanding transport properties integrated with dominant fluid flow mechanisms in mudrocks is essential to better predict the performance of mudrocks within these applications. In this study, small-angle neutron scattering (SANS) experiments were conducted on 71 samples from 13 different sets of mudrocks across the globe to capture the pore structure of nearly the full pore size spectrum (2 nm–5 μm). We develop fractal models to predict transport properties (permeability and diffusivity) based on the SANS-derived pore size distributions. The results indicate that transport phenomena in mudrocks are intrinsically pore size-dependent. Depending on hydrostatic pore pressures, transition flow develops in micropores, slip flow in meso- and macropores, and continuum flow in larger macropores. Fluid flow regimes progress towards larger pore sizes during reservoir depletion or smaller pore sizes during fluid storage, so when pressure is decreased or increased, respectively. Capturing the heterogeneity of mudrocks by considering fractal dimension and tortuosity fractal dimension for defined pore size ranges, fractal models integrate apparent permeability with slip flow, Darcy permeability with continuum flow, and gas diffusivity with diffusion flow in the matrix. This new model of pore size-dependent transport and integrated transport properties using fractal models yields a systematic approach that can also inform multiscale multi-physics models to better understand fluid flow and transport phenomena in mudrocks on the reservoir and basin scale.

36 MATERIALS SCIENCE↗

Imaging of Formaldehyde Adsorption and Diffusion on TiO2(110)

Surface reactions of formaldehyde with reduced TiO2(110) surfaces have been studied using variable-temperature scanning tunneling microscopy (STM) and density functional theory (DFT). STM results show that formaldehyde preferably adsorbs on the bridging bonded oxygen (Ob) vacancy (VO) defect site. Bias-dependent STM images show that both the Ti-bound CH2O and the VO-bound CH2O are positioned between the Ob row and the Ti row. The VO-bound formaldehyde rotates at 95 K. It starts to diffuse along the Ob row as –CH2– at ~170 K and starts to diffuse along the Ti row as a molecule at ~215 K. However, the stabilities and the configurations of the Ti-bound and the VO-bound formaldehyde calculated using DFT are not in line with the experimental results. The values of diffusion barriers determined experimentally and theoretically are also different. The discrepancy between the experiment and theory indicates the presence of a complex charge distribution related to the defects.

defects↗

STRESS ANNEALING INDUCED DIFFUSE SCATTERING FROM Ni3(Al,Si) PRECIPITATES

Diffuse scattering caused by L12 type Ni3 (Al,Si) precipitates after stress annealing of Ni-Al-Si alloys is studied. Experimental reciprocal space maps are compared to the theoretical ones. Oscillations of diffuse scattering due to Ni3 (Al,Sc) precipitates are observed. Peculiarities of diffuse scattering in asymptotic region as compared to Huang scattering region are discussed. Coupling between the stress annealing direction and the precipitate shape is demonstrated.

36 MATERIALS SCIENCE↗

Influence of Particle Size on Apparent Diffusivity During Spark Plasma Sintering of Crystalline Powders

Abstract:: A theoretical framework is presented to determine an apparent diffusivity D during powder sintering and further elucidate the underlying interrelation between D and shrinkage behaviors of powders. Furthermore, to eliminate the influence of crystalline defects that are typically present in raw powders, complete crystallization of metallic glass powders is performed to allow the investigation of the influence of particle size solely on powder densification. Furthermore, to validate the framework developed, Ti{sub 40.6}Zr{sub 9.4}Cu{sub 37.5}Ni{sub 9.4}Sn{sub 3.1} crystalline alloy powders constituting particles with different sizes are examined to establish a correlation between D and the sintering behaviors of the powders. The findings show that the value of the apparent diffusivity D increases with the increasing particle size, which accelerates powder densification during spark plasma sintering. Furthermore, the results quantitatively support the argument that particle size can affect atomic diffusion during powder sintering.

36 MATERIALS SCIENCE↗

A class of efficient difference method for time fractional reaction–diffusion equation

The fractional reaction–diffusion equation has profound physical background and theoretical connotation, and its numerical methods are of great scientific significance and practical value. In this paper, a class of explicit–implicit (E–I) difference method and implicit–explicit (I–E) difference method are proposed for one-dimensional time fractional reaction–diffusion equation. The methods are constructed by combining classical explicit scheme and classical implicit scheme. The existence, uniqueness and convergence of solutions are given for E–I and I–E schemes. Theoretical analysis and numerical experiments show that the E–I and I–E schemes are unconditionally stable, with second-order spatial accuracy and 2−α order temporal accuracy. Compared with the classical implicit difference method with the similar accuracy, the computation time of the presented methods is improved by nearly 41%. It is shown that the E–I difference method and I–E difference method are effective for solving the time fractional reaction–diffusion equation.

97 MATHEMATICS AND COMPUTING↗

Ballistic-diffusive phonon heat transport across grain boundaries

The propagation of a heat pulse in a single crystal and across grain boundaries (GBs) is simulated here using a concurrent atomistic-continuum method furnished with a coherent phonon pulse model. With a heat pulse constructed based on a Bose-Einstein distribution of phonons, this work has reproduced the phenomenon of phonon focusing in single and polycrystalline materials. Simulation results provide visual evidence that the propagation of a heat pulse in crystalline solids with or without GBs is partially ballistic and partially diffusive, i.e., there is a co-existence of ballistic and diffusive thermal transport, with the long-wavelength phonons traveling ballistically while the short-wavelength phonons scatter with each other and travel diffusively. To gain a quantitative understanding of GB thermal resistance, the kinetic energy transmitted across GBs is monitored on the fly and the time-dependent energy transmission for each specimen is measured; the contributions of coherent and incoherent phonon transport to the energy transmission are estimated. Simulation results reveal that the presence of GBs modifies the nature of thermal transport, with the coherent long-wavelength phonons dominating the heat conduction in materials with GBs. In addition, it is found that phonon-GB interactions can result in reconstruction of GBs.

36 MATERIALS SCIENCE↗

ICAT: A numerical scheme to minimize numerical diffusion in advection-dispersion modeling and its application in identifying flow channeling

The advection-dispersion equation for scalar transport is essential for the numerical modeling of many fluid dynamics problems. However, solutions from numerical schemes always suffer from numerical diffusion and/or oscillation. In this study, we develop an Intra-Cell Advection Tracking (ICAT) scheme to minimize numerical diffusion and preserve monotonicity for advection-dispersion modeling. The key idea is to introduce “queues” in each discretized cell, and using a sequential transport rule and a flow distribution mechanism to track the scalar transport in these queues temporally and spatially. The capability and limitations of ICAT are first investigated through three test cases. Compared with the results obtained from other numerical schemes, the results from ICAT show substantially reduced numerical diffusion and agree better with analytical solutions. We also employ ICAT to simulate the transport process of a conservative tracer in a fracture with a highly heterogeneous aperture distribution. We report discrete flow channels in the fracture are better discerned by ICAT than by other numerical schemes, indicating the suitability of ICAT for modeling tracer transport in channelized flow fields.

15 GEOTHERMAL ENERGY↗

Active-Site Hydration and Water Diffusion in Cytochrome P450cam: A Highly Dynamic Process

Long-timescale molecular dynamics simulations (300 ns) are performed on both the apo- (i.e., camphor-free) and camphor-bound cytochrome P450cam (CYP101). Water diffusion into and out of the protein active site is observed without biased sampling methods. During the course of the molecular dynamics simulation, an average of 6.4 water molecules is observed in the camphor-binding site of the apo form, compared to zero water molecules in the binding site of the substrate-bound form, in agreement with the number of water molecules observed in crystal structures of the same species. However, as many as 12 water molecules can be present at a given time in the camphor-binding region of the active site in the case of apo-P450cam, revealing a highly dynamic process for hydration of the protein active site, with water molecules exchanging rapidly with the bulk solvent. Water molecules are also found to exchange locations frequently inside the active site, preferentially clustering in regions surrounding the water molecules observed in the crystal structure. Potential-of-mean-force calculations identify thermodynamically favored trans-protein pathways for the diffusion of water molecules between the protein active site and the bulk solvent. Binding of camphor in the active site modifies the free-energy landscape of P450cam channels toward favoring the diffusion of water molecules out of the protein active site.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling of diffusive mass transport in micropores in cement based materials

In order to predict long-term leaching behavior of cement constituents for safety assessments of radioactive waste disposal, we modeled diffusive mass transport in micropores in cement based materials. Based on available knowledge on the pore structure, we developed a transport porosity model that enables us to estimate effective porosity available for diffusion (transport porosity) in cement based materials. We microscopically examined the pore structure of hardened cement pastes to partially verify the model. Effective diffusivities of tritiated water in hardened cement pastes were also obtained experimentally, and were shown to be proportional to the estimated transport porosity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling experimental results of diffusion of alkaline solutions through a compacted bentonite barrier

The interaction between concrete/cement and swelling clay (bentonite) has been modeled in the context of engineered barrier systems for deep geological disposal of high-level radioactive waste. The geochemical transformations observed in laboratory diffusion experiments at 60 and 90 {sup o}C between bentonite and different high-pH solutions (K-Na-OH and Ca(OH){sub 2}-saturated) were reconciled with the reactive transport code CrunchFlow. For K-Na-OH solutions (pH = 13.5 at 25 {sup o}C) partial dissolution of montmorillonite and precipitation of Mg-silicates (talc-like), hydrotalcite and brucite at the interface are predicted at 60 {sup o}C, while at 90 {sup o}C the alteration is wider. Alkaline cations diffused beyond the mineralogical alteration zone by means of exchange with Mg{sup 2+} in the interlayer region of montmorillonite. Very slow reactivity and minor alteration of the clay are predicted in the Ca(OH){sub 2}-bentonite system. The model is a reasonable description of the experiments but also demonstrates the difficulties in modeling processes operating at a small scale under a diffusive regime.

36 MATERIALS SCIENCE↗

Solution of the nonlinear Poisson-Boltzmann equation: Application to ionic diffusion in cementitious materials

A robust numerical solution of the nonlinear Poisson-Boltzmann equation for asymmetric polyelectrolyte solutions in discrete pore geometries is presented. Comparisons to the linearized approximation of the Poisson-Boltzmann equation reveal that the assumptions leading to linearization may not be appropriate for the electrochemical regime in many cementitious materials. Implications of the electric double layer on both partitioning of species and on diffusive release are discussed. The influence of the electric double layer on anion diffusion relative to cation diffusion is examined.

36 MATERIALS SCIENCE↗

Performance of fly ash concrete with ferronickel slag fine aggregate against alkali-silica reaction and chloride diffusion

Ferronickel slag (FNS) is an industrial by-product of ferronickel alloy production at a high temperature which can be a promising potential to be used as fine aggregate to produce more sustainable concrete. In this study, the performance of concrete containing ferronickel slag sand and fly ash relating to alkali-silica reaction (ASR) and chloride contamination was investigated. ASR-induced expansion, chloride diffusion resistance, and chloride binding capacity of FNS concrete were determined through concrete prism tests (CPT), accelerated diffusion test, and bulk diffusion test. Thermogravimetric analysis (TGA) was conducted to measure the amount of Portlandite and Friedel's salt in concrete. Concrete with 50 wt% FNS sand as fine natural aggregate replacement and 25 wt% of cement replacement by fly ash showed a remarkable potential to be used not only as a low-carbon concrete with comparable mechanical properties to conventional concrete but also with a better performance against ASR and chloride contamination.

36 MATERIALS SCIENCE↗

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗

A time-dependent chloride diffusion model for predicting initial corrosion time of reinforced concrete with slag addition

The effect of granulated blast furnace slag (GBFS) addition on the threshold chloride concentration (TCC) for rebar corrosion was investigated. A modified diffusion model, coupled with a time-dependent effective diffusion coefficient and surface chloride concentration, was proposed to predict the chloride profile. The corrosion initiation time was estimated based on the model predictions and the measured TCC. The results indicate that adding GBFS decreases the TCC by lowering the pH value of the pore solution. The evolution of corrosion potential and current density is found to obey a 3-parameter Weibull distribution. MIP tests show that adding GBFS contributes to refinement of pore structure by decreasing the fraction of large capillary pores. The time-dependent model exhibits good predictive strength and helps understand how GBFS addition delays the corrosion initiation by retarding the chloride diffusion, though a lower TCC is obtained.

36 MATERIALS SCIENCE↗

Nitrogen diffusion in silicate minerals, with implications for nitrogen transport and cycling in the lithosphere

Diffusion laws for nitrogen in orthoclase, quartz, olivine and clinopyroxene were determined using a combination of experimental strategies that included: in-diffusion from C-H-O-N vapor; in-diffusion from molten NH 4 Cl; and ion implantation followed by heating to mobilize N. Most experiments were conducted at pressures near 1 bar, but seven experiments were also run in a piston-cylinder device at P total = 1 GPa. The C-H-O-N-source experiments were “wet” (H 2 O present); those on ion-implanted samples were dry. All N sources were highly enriched in 15 N to avoid spurious 14 N signals resulting from surface contamination. Use of 15 N also enabled depth profiling by nuclear reaction analysis (NRA) using the 15 N(p,αγ) 12 C reaction, which has a detection limit of ~10 ppm. Nitrogen profiles in three samples were characterized by both NRA and SIMS, with similar results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long carrier diffusion length in two-dimensional lead halide perovskite single crystals

Ruddlesden-Popper (RP) perovskites are two-dimensional semiconductors for high-performance optoelectronic devices. In this work, we report a long in-plane carrier diffusion length in 2D RP perovskite single crystals probed by scanning photocurrent microscopy. Carrier diffusion lengths of 7–14μm are observed when the number of PbI 6 –2 octahedra between organic spacers increases from 1 to 3. Using detailed light intensity and electric-field-dependent photocurrent measurements, we attribute the observed long diffusion length to the dominating dissociated free carrier transport. This is further validated by time-resolved photoluminescence measurements, where the decay lifetime increases in the presence of an electric field. From our experiments, we conclude that the in-plane transport in RP perovskites is efficient because of the partial free carrier generation, which overcomes strong excitonic effects. In conclusion, our results suggest that semiconducting devices fabricated from RP perovskite single crystals can be as efficient as their 3D counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of soot and nitrogen oxides in unsteady counterflow diffusion flames

The formation of pollutant species in turbulent diffusion flames is strongly affected by turbulence/chemistry interactions. Unsteady counterflow diffusion flames can be conveniently used to address the unsteady effects of hydrodynamics on the pollutant chemistry, because they exhibit a larger range of combustion conditions than those observed in steady flames. In this paper, unsteady effects on the formation of soot (and its main precursors) and nitrogen oxides (NO{sub x}) are investigated by imposing harmonic oscillations on the strain rate of several counterflow diffusion flames fed with propane. Numerical results confirm that the dynamic response of each species is strongly affected by the strain rate oscillations and the characteristic time governing its chemistry. At low frequencies of imposed oscillations the soot and NO{sub x} profiles show strong deviations from the steady-state profile. At large frequencies a decoupling between the concentration and the velocity field is evident. In particular, the formation of soot and NO{sub x} is found less sensitive to velocity fluctuations for flames with large initial strain rate. The significant increase of soot and NO{sub x} concentrations in unsteady conditions appears to be a function of both forcing frequency and flame global strain rate. Moreover, the cut-off frequency, defined as the minimum frequency above which the strain rate oscillations have negligible effects on the formation of each species, was found to be strongly dependent on the chemical characteristic time and the flame global strain rate, but only marginally affected by the amplitude of imposed oscillations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗