Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cycle Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Novel Environmentally Friendly Superabsorbent Hydrogel Hybrids from Synthesized Star-Shaped Bio-based Monomers and Acrylic Acid

During the past decades, production and applications of petroleum-based superabsorbents have grown dramatically; currently, superabsorbents are produced from acrylic acid, which consequently increase the environmental concerns. The high consumption rate of superabsorbent on the one hand, and their persistence in the environment from the other hand would make the waste of this material a potential hazard for the environment. These materials are not biodegradable, and if degraded hazardous derivatives would be released into soil and water. The current work presents the synthesis and the performance of a novel superabsorbent hydrogel, based on star-shaped bio-based compartments and acrylic acid. Herein, the synthesis of two bio-based star-shaped monomers will be reported based on the condensation reaction between hydroxyl and carboxylic acid end groups of a bio-acid and a bio-alcohol. The first monomer was synthesized from glycerin, succinic acid, lactic acid, itaconic acid, and acrylic acid. The second monomer was synthesized from glycerin, lactic acid, and methacrylic acid. The monomers structures were characterized via FT-IR and {sup 1}HNMR spectroscopies. The different portions of biobased monomers (10, 30, 50, and 70 wt%) were used in combination with the acrylic acid monomer to form hybrid superabsorbents. The swelling properties and the absorbency under load (AUL) of superabsorbents were investigated in turn. The maximum absorption capacities (398.49 and 90.10 g g{sup −1} in water and saline solution, respectively) were observed when 30 wt% of acrylic acid backbone of the superabsorbent was replaced with the bio-based monomer. Moreover, economic and environmental profiles of the hybrid SAPs have been evaluated. The comparative environmental assessment performed using life cycle analysis method, based on the material and energy balances obtained from the available literature. While the economy of the hybrid SAPs production still suffers from the high price of the employed raw biomaterials during manufacturing, the better environmental profiles obtained for the hybrid SAPs.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Evaluation of Strain–Life Fatigue Curve Estimation Methods and Their Application to a Direct-Quenched High-Strength Steel

Methods to estimate the strain–life curve, which were divided into three categories: simple approximations, artificial neural network-based approaches and continuum damage mechanics models, were examined, and their accuracy was assessed in strain–life evaluation of a direct-quenched high-strength steel. All the prediction methods claim to be able to perform low-cycle fatigue analysis using available or easily obtainable material properties, thus eliminating the need for costly and time-consuming fatigue tests. Simple approximations were able to estimate the strain–life curve with satisfactory accuracy using only monotonic properties. The tested neural network-based model, although yielding acceptable results for the material in question, was found to be overly sensitive to the data sets used for training and showed an inconsistency in estimation of the fatigue life and fatigue properties. The studied continuum damage-based model was able to produce a curve detecting early stages of crack initiation. This model requires more experimental data for calibration than approaches using simple approximations. As a result of the different theories underlying the analyzed methods, the different approaches have different strengths and weaknesses. However, it was found that the group of parametric equations categorized as simple approximations are the easiest for practical use, with their applicability having already been verified for a broad range of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation γ-TiAl Alloys

In this work, the physical and chemical compatibility of cast Ti-Al-Nb-Cr-Zr and Ti-Al-Nb-Cr-Zr-B-La alloys was investigated with oxidation-resistant M-Cr-Al-X thermal spray coatings. Ti and Al are main alloy elements to form γ-TiAl and α{sub 2}-Ti{sub 3}Al phases. To obtain coatings, we used air plasma spray and high-velocity oxygen fuel equipment. Four commercially available M-Cr-Al-X powders, including Ta-containing, were used as starting materials. Our investigation of compatibility between M-Cr-Al-X thermal spray coatings and γ-TiAl alloys consists of isothermal annealing in air muffle furnace during 100 h at 920 °C, followed by samples investigation. Oxidation products formed at coatings surface were studied by XRD analysis with Rietveld refinement. Interdiffusion between coatings and alloys was studied by means of cross-sectional SEM with EDX analysis. Plots were made to show concentration of each main element at the end of experiments. Samples were subjected to dynamic mechanical thermal analysis in order to determine the effect of high-temperature exposure on complex elastic modulus. Finally, burner rig cycling test was performed to estimate the thermal shock resistance of M-Cr-Al-X coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Uniformly dispersed FeO x atomic clusters by pulsed arc plasma deposition: An efficient electrocatalyst for improving the performance of Li–O2 battery

The present study aims to explore a new method to improve the catalytic activity of non-precious metals, especially in electrochemical reactions. In this study, highly ionized Fe plasma produced by arc discharge uniformly deposit on porous carbon substrate and form atomic clusters by the Pulsed Arc Plasma Deposition technique. The as-prepared FeOx/C material was tested as a cathode material in rechargeable Li-O2 battery under different current rates. The results show a significantly improvement of the battery performance in both cycle life and reaction rate. Furthermore, XRD and SEM results show that the as-prepared cathode material has the ability to stabilize cathode and reduce side reactions, and current rate is a critical factor of the nucleation of the discharge products.

electrocatalyst↗
DOE OSTI2023

Market analysis for the integration of new power technologies: A case study of the deployment of hybrid fossil-based generator plus energy storage (ES-FE)

This study examines the national landscape of hybridized fossil energy (FE) power plants with energy storage (ES) technologies (“ES-FE”) and presents the compilation of an ES-FE dataset, which includes over 65 ES-FE projects and concepts in the United States, comprising approximately 500 MWh of co-located ES capacity with FE power plants. This study also estimates the economic feasibility of adding ES to existing FE power plants by characterizing the potential revenues that can be generated by the ES component through flexibility and capacity value. The analysis focuses on ES technologies with 2- to 10-h. durations located in four U.S. independent system operators (ISOs): Midcontinent ISO (MISO), Electric Reliability Council of Texas (ERCOT), PJM Interconnection (PJM), and California ISO (CAISO), which have +70,000 MW of combined FE power capacity that could add ES. Annual revenues are estimated for the ES component using a what-if-analysis approach, for capacity value, price arbitrage, or ancillary services provision. The results show that annual revenues depend on the end-use storage service, wholesale electricity and capacity market prices, and ES technology operation parameters such as discharging duration and cycling frequency. When performing a sensitivity analysis, ES accrues $7–178/kW-yr. via price arbitrage and ancillary services provision in the four ISOs, and $13–92/kW-yr. when providing capacity value only in MISO and PJM. A cash flow analysis is performed to estimate the net present value (NPV) of the ES addition using a range of ES costs. The study finds that for most ES technologies considered, these revenues alone are insufficient to achieve economic feasibility. In conclusion, of the 1645 total runs analyzed, 115 had positive NPVs (7%). Therefore, other revenue streams or monetizable benefits are necessary to achieve the break-even point.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

Refractory-based thermal energy storage for industrial process heat: one-dimensional modeling, control, and optimization

The variable and weather-dependent output of wind and solar power plants present a substantial challenge for planning and operating electricity-systems, particularly in the absence of cost-effective and dispatchable energy storage technologies. This study investigates a high-temperature, electrically heated, refractory-based thermal energy storage (RTES) system that stores electrical energy as sensible heat in dense ceramic bricks over the 950–1800 °C range. The stored heat can be discharged as a controlled hot-gas stream for industrial heating, fuel substitution in high-temperature processes, or electricity generation. The main novelty is a comprehensive modelling, control, mapping, and optimization framework that integrates one-dimensional transient gas–solid heat transfer, fan-assisted discharge, bypass-flow regulation, reheating logic, fan-power evaluation, insulation-loss assessment, and genetic-algorithm-based design optimization. The model uses feedback from outlet temperature and delivered power to regulate discharge, while a two-stage genetic algorithm optimizes brick-channel geometry, gas-flow operation, and multilayer insulation thicknesses. Storage capacities below 50 MWh and discharge powers of 5–30 MW are analyzed to evaluate hold time, thermal delivery, fan-power penalty, heat loss, state-of-charge evolution, and indicative capital cost. Results demonstrate that optimized and well-insulated refractory-based thermal energy storage units can provide stable, efficient, and repeatable heat delivery over multiple discharge cycles. The generated performance and cost maps support modular refractory thermal energy storage as a practical option for large-scale integration of wind and solar generation and for high-temperature industrial process heat.

25 ENERGY STORAGE↗
DOE OSTI2021

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Composite polymer electrolytes (CPEs) for solid-state Li-metal batteries (SSLBs) still suffer from gradually increased interface resistance and unconstrained Li-dendrite growth. Herein, we addressed the challenges by designing a LiF-rich inorganic solid-electrolyte interphase (SEI) through introducing a fluoride-salt-concentrated interlayer on CPE film. The rigid but flexible CPE helps accommodate the volume change of electrodes, while the polymeric highly concentrated electrolyte (PHCE) surface-layer regulates Li-ion flux due to the formation of a stable LiF-rich SEI via anion reduction. The designed CPE-PHCE presents enhanced ionic conductivity and high oxidation stability of >5.0 V (versus Li/Li + ). Furthermore, it dramatically reduces the interfacial resistance and achieves a high critical current density of 4.5 mA cm –2 . The SSLBs, fabricated with thin CPE-PHCE membranes (<100 μm) and Co-free LiNiO 2 cathodes, exhibit exceptional electrochemical performance and long cycling stability. Lastly, this approach of SEI design can also be applied to other types of batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Evaluation of electrochemical performance and redox activity of Fe in Ti doped layered P2-Na0.67Mn0.5Fe0.5O2 cathode for sodium ion batteries

Here, we report a wet synthesis-based titanium doping strategy to improve the structural stability and electrochemical performances, such as cycling stability and rate capability, of P2-type Na 0.67 Fe 0.5 Mn 0.5 O 2 layered oxide cathodes. Through Ti 4+ doping aimed at replacing some of the Mn and Fe atoms in the crystal structure, effective mitigation of the Jahn Teller distortion caused by active Mn 3+ before charging and Fe 4+ after charging was achieved. X-ray diffraction (XRD), Raman spectroscopy, Electrochemical Impedance Spectroscopy (EIS) and Mössbauer spectroscopy were used to investigate the effects of the Ti 4+ dopant before and after cycling. It was observed that Ti 4+ doping increased the Na layer thickness, minimized the lattice volume strain, showed better structural stability, minimally decreased Fe migration to the Na layer, and lowered charge transfer resistance in these P2-type cathodes. Overall, our reported synthesis methodology and electrochemical characterizations highlight the feasibility of Ti doping in sodium layered oxide P2-type cathodes.

25 ENERGY STORAGE↗
DOE OSTI2019

Selective sodium-ion diffusion channels in Na 2 - x Fe 3 (PO 4 ) 3 positive electrode for Na-ion batteries

The electrochemical community around the world is focusing heavily on sodium-ion batteries R&D due to the huge abundance of sodium and need for large scale deployment of safe and inexpensive batteries for the electrical grid energy storage. Here, we observe the characterization of model parameters such as ionic diffusivity and interfacial kinetics, for a potential sodium-ion battery cathode material, Na 2 - x Fe 3 (PO 4 ) 3 , using experimental and computational investigations. The Na 2 - x Fe 3 (PO 4 ) 3 structure is characterized by two distinct one-dimensional (1-D) Na diffusion channels. Density Functional Theory (DFT) calculation reveals that Na is first fully removed from one of the channels followed by the subsequent removal of Na from the second channel. The experimental exploration reveals that, in the beginning of Na removal at 0 ≤ x ≤ 0.5; the sodium ion diffusivity is of the order of ~10 –11 cm 2 s –1 and then slightly decreases. This is further confirmed by comparing the calculated sodium diffusion barriers along the individual 1-D channels as well as between the channels. Nevertheless, the exchange current density slowly increases up to x=1.0 and remains quite constant thereafter. The magnitude of exchange current density is very low suggesting that the interfacial kinetics are the rate limiting factor. The obtained results indicate that Na 2 - x Fe 3 (PO 4 ) 3 could achieve better rate performance with long cycling stability through engineering of the particle morphology and microstructure.

25 ENERGY STORAGE↗
DOE OSTI2013

Patterns of Failure After Concurrent Bevacizumab and Hypofractionated Stereotactic Radiation Therapy for Recurrent High-Grade Glioma

Purpose: Concurrent bevacizumab with hypofractionated stereotactic radiation therapy (HSRT) is safe and effective for the treatment of recurrent high-grade gliomas (HGG). The objective of this study was to characterize the patterns of failure after this treatment regimen. Methods and Materials: Twenty-four patients with recurrent enhancing HGG were previously treated on an institutional review board-approved protocol of concurrent bevacizumab and reirradiation. Patients received 30 Gy in 5 fractions to the recurrent tumor with HSRT. Brain magnetic resonance imaging (MRI) was performed every 2 cycles, and bevacizumab was continued until clinical or radiographic tumor progression according to the criteria of Macdonald et al. MRI at the time of progression was fused to the HSRT treatment plan, and the location of recurrence was classified on the basis of volume within the 95% isodose line. Outcomes based on patient characteristics, tumor grade, recurrence pattern, and best response to treatment were analyzed by the Kaplan-Meier method. Results: Twenty-two patients experienced either clinical or radiographic progression. Recurrent tumor was enhancing in 15 (71.4%) and nonenhancing in 6 (28.6%) patients. Eleven patients (52.4%) had recurrence within the radiation field, 5 patients (23.8%) had marginal recurrence, and 5 patients had recurrence outside the radiation field. Pattern of enhancement and location of failure did not correlate with overall survival or progression-free survival. Radiographic response was the only variable to significantly correlate with progression-free survival. Conclusions: Despite the promising initial response seen with the addition of HSRT to bevacizumab as salvage treatment for recurrent HGG, approximately half of patients ultimately still experience failure within the radiation field. The rate of local failure with the addition of HSRT seems to be lower than that seen with bevacizumab alone in the salvage setting. Our data underscore the radioresistance of HGG and the need for better salvage treatments.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

Textured ceramic membranes for desilting and deoiling of produced water in the Permian Basin

Oil production in the Permian Basin gives rise to large volumes of produced water contaminated by silt, emulsified oil, and additives used for enhanced oil recovery. There is intense interest in the design of membrane modules as sustainable alternatives for produced water treatment to enable the reuse of produced water for agricultural applications, injection into aquifers, and redeployment in oil recovery. Here, we report a hierarchically textured cement-based membrane exhibiting orthogonal wettability, specifically, superhydrophilic and underwater superoleophobic characteristics. The in situ formation of ettringite needles accompanied by embedding of glass spheres imbues multiscale texturation to stainless-steel mesh membranes, enabling the separation of silt and oil from produced water at high flux rates (1600 L h -1 ∙m -2 , at ca. 2.7 bar). Oil concentration is reduced as low as 1 ppb with an overall separation efficiency of 99.7% in singlepass filtration. The membranes show outstanding mechanical resilience and retention of performance across multiple cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

LiMnPO4·Li3V2(PO4)3 composite cathode material derived from Mn(VO3)2 nanosheet precursor

The LiMnPO4·Li3V2(PO4)3/C composite cathode material was synthesized from Mn(VO3)2 nanosheet precursor, which was prepared by a hydrothermal method. The structure and morphology of the composite were systematically investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and scanning transmission electron microscopy (STEM), etc. The LiMnPO4·Li3V2(PO4)3/C composite material exhibits a low polarization and high specific capacity of 150.7 mAh g-1 at 0.1C in voltage range of 2.5–4.5V, and excellent cycle and rate performance for its stable nanocomposite framework. The composite material dominantly exists in the morphological shape of nanograins and nanorods, which increases the surface area and hence facilitate the electrolyte penetration. The nanoparticle components were even further identified in detail.

Lei, Zhihong↗
DOE OSTI2020

An advanced low-cost cathode composed of graphene-coated Na 2.4 Fe 1.8 (SO 4 ) 3 nanograins in a 3D graphene network for ultra-stable sodium storage

Iron-based electrodes have attracted great attention for sodium storage because of the distinct cost effectiveness. However, exploring suitable iron-based electrodes with high power density and long duration remains a big challenge. Herein, a spray-drying strategy is adopted to construct graphene-coated Na 2.4 Fe 1.8 (SO 4 ) 3 nanograins in a 3D graphene microsphere network. The unique structural and compositional advantages endow these electrodes to exhibit outstanding electrochemical properties with remarkable rate performance and long cycle life. Additionally, mechanism analyses further explain the outstanding electrochemical properties from the structural aspect.

25 ENERGY STORAGE↗
DOE OSTI2022

Insights into Ti doping for stabilizing the Na 2/3 Fe 1/3 Mn 2/3 O 2 cathode in sodium ion battery

Iron- and manganese-based layered metal oxides, as cathodes for sodium ion batteries, have received widespread attention because of the low cost and high specific capacity. However, the Jahn-teller effect of Mn 3+ ions and the resulted unstable structure usually lead to continuously capacity decay. Herein, Titanium (Ti) has been successfully doped into Na 2/3 Fe 1/3 Mn 2/3 O 2 to suppress the Jahn-Teller distortion and improve both cycling and rate performance of sodium ion batteries. In situ high-energy synchrotron X-ray diffraction study shows that Ti-doped compound (Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 ) can maintain the single P2 phase without any phase transition during the whole charging/discharging process. Further, various electrochemical characterizations are also applied to explore the better kinetics of sodium ions transfer in the Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 . This work provides a comprehensive insight into the Ti-doping effects on the performance from both structural and electrokinetic perspectives.

25 ENERGY STORAGE↗
DOE OSTI2014

Pulsed sonication for alumina coatings on high-capacity oxides: Performance in lithium-ion cells

High-capacity xLi2MnO3•(1-x)LiMO2 (M=Ni, Mn, Co) oxides show relatively rapid performance degradation when cycled at voltages >4.5V vs. Li/Li+. Previous research has indicated that modifying the oxide surfaces with coatings, such as alumina, reduces cell impedance rise and improves capacity retention. In this article, we demonstrate pulsed-sonication as a rapid and effective approach for coating alumina on Li1.2Ni0.175Mn0.525Co0.1O2 (0.5Li2MnO3•0.5LiNi0.44Mn0.31Co0.25O2) particles. Oxide integrity and morphology is maintained after the sonochemical process and subsequent heat-treatment. Energy dispersive spectroscopy (EDS) X-ray elemental maps show uniform coating of all secondary particles. 27Al Magic Angle Spinning (MAS) NMR data confirm the presence of alumina and mainly indicate octahedral aluminum occupancy in a six-coordinate environment with oxygen. Full cells containing electrodes with the alumina-coated particles demonstrate lower initial impedance rise and better capacity retention during extended cycling to high voltages. However, the coating has a negligible effect on the voltage hysteresis and voltage fade behavior displayed by these oxides. The various data indicate that the pulsed sonochemical technique is a viable approach for coating oxide particles. The methodology described herein can easily be extended beyond alumina to include coatings such as AlF3, MgO, and MgF2.

1H NMR↗
DOE OSTI2020

Size effect on the growth and pulverization behavior of Si nanodomains in SiO anode

Silicon monoxide (SiO) as a promising silicon-based anode electrode of lithium-ion batteries (LIBs) has been the subject of many recent investigations. However, the complex microstructural features of SiO hinder attempts to link the microstructure changes in SiO with its electrochemical performances upon electrochemical cycling. This study employs X-ray pair distribution function (PDF), with a high-resolution transmission electron microscope (HRTEM), to investigate the microstructure of Si nanodomains in SiO and its structural evolution over the electrochemical cycling process. The experiment results reveal the size evolution of Si nanodomains in SiO during the electrochemical cycling and find it highly dependent on the initial Si domain size in SiO. If the initial Si domain size is too large, the average size of Si nanodomains would increase at first and then decrease after a certain number of cycles, which indicates the pulverization of Si domains after the electrochemical-driven growth of Si nanodomains reaches a critical point. Furthermore, these results suggest that an optimal initial Si nanodomain size of 4-6 nm for SiO anode materials is essential to retard the growth and subsequent pulverization process of Si nanodomains and thus to improve the cyclability of SiO during long-term cycling.

25 ENERGY STORAGE↗
DOE OSTI2012

Structure and Assembly Mechanism for Heteromeric Kainate Receptors

Native glutamate receptor ion channels are tetrameric assemblies containing two or more different subunits. NMDA receptors are obligate heteromers formed by coassembly of two or three divergent gene families. While some AMPA and kainate receptors can form functional homomeric ion channels, the KA1 and KA2 subunits are obligate heteromers which function only in combination with GluR57. The mechanisms controlling glutamate receptor assembly involve an initial step in which the amino terminal domains (ATD) assemble as dimers. Here, we establish by sedimentation velocity that the ATDs of GluR6 and KA2 coassemble as a heterodimer of K{sub d} 11 nM, 32,000-fold lower than the K{sub d} for homodimer formation by KA2; we solve crystal structures for the GluR6/KA2 ATD heterodimer and heterotetramer assemblies. Using these structures as a guide, we perform a mutant cycle analysis to probe the energetics of assembly and show that high-affinity ATD interactions are required for biosynthesis of functional heteromeric receptors.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Demonstration and characterization of insertable passive thermal switches for dynamic building envelopes

A dynamic building envelope integrated with thermal energy storage, such as phase change material (PCM), is an emerging technology that offers a promising solution to improve the energy efficiency of buildings. This study reports the development of insertable thermal switches, which modulate thermal resistance, thereby making building envelopes dynamic and enhancing the use of free ambient heating and cooling. The reported thermal switches are passive, meaning they work solely based on indoor and outdoor temperatures. A single switch when inserted into 10 × 10-in (0.064-m 2 ) XPS foam board insulation demonstrates effective thermal conductivity of 0.050 W/m-K in the resistive state and 0.285 W/m-K in the conductive state. Thermal switches exhibit an effective switching ratio of 5.7, with no noticeable degradation in performance over 770 cycles. Additionally, when integrated into a wall sample containing a PCM layer, switches significantly reduce the PCM solidification time by 43.2% during the cooling process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗