Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Convective clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Possible Mechanisms for Turbofan Engine Ice Crystal Icing at High Altitude

A thermodynamic model is presented to describe possible mechanisms of ice formation on unheated surfaces inside a turbofan engine compression system from fully glaciated ice crystal clouds often formed at high altitude near deep convective weather systems. It is shown from the analysis that generally there could be two distinct types of ice formation: (1) when the "surface freezing fraction" is in the range of 0 to 1, dominated by the freezing of water melt from fully or partially melted ice crystals, the ice structure is formed from accretion with strong adhesion to the surface, and (2) when the "surface melting fraction" is the range of 0 to 1, dominated by the further melting of ice crystals, the ice structure is formed from accumulation of un-melted ice crystals with relatively weak bonding to the surface. The model captures important qualitative trends of the fundamental ice-crystal icing phenomenon reported earlier (Refs. 1 and 2) from the research collaboration work by NASA and the National Research Council (NRC) of Canada. Further, preliminary analysis of test data from the 2013 full scale turbofan engine ice crystal icing test (Ref. 3) conducted in the NASA Glenn Propulsion Systems Laboratory (PSL) has also suggested that (1) both types of ice formation occurred during the test, and (2) the model has captured some important qualitative trend of turning on (or off) the ice crystal ice formation process in the tested engine low pressure compressor (LPC) targeted area under different icing conditions that ultimately would lead to (or suppress) an engine core roll back (RB) event.

Crystal Icing↗
NASA NTRS2018

Latent Heating from TRMM and GPM Measurement

The Goddard Convective-Stratiform Heating (CSH) algorithm, used to estimate cloud heating in support of the Tropical Rainfall Measuring Mission (TRMM), is upgraded in support of the Global Precipitation Measurement mission (GPM). The algorithm is required to use look-uptables (LUTs) from cloud-resolving model (CRM) simulations from the Goddard Cumulus Ensemble model (GCE). This paper will present the heating retrievals from the Goddard CSH algorithm in the TRMM and GPM using precipitation products (rainfall, radar reflectivity).

Latent Heating↗
NASA NTRS2016

What Controls the Vertical Distribution of Aerosol? Relationships Between Process Sensitivity in HadGEM3-UKCA and Inter-Model Variation from AeroCom Phase II

The vertical profile of aerosol is important for its radiative effects, but weakly constrained by observations on the global scale, and highly variable among different models. To investigate the controlling factors in one particular model, we investigate the effects of individual processes in HadGEM3-UKCA and compare the resulting diversity of aerosol vertical profiles with the inter-model diversity from the AeroCom Phase II control experiment. In this way we show that (in this model at least) the vertical profile is controlled by a relatively small number of processes, although these vary among aerosol components and particle sizes. We also show that sufficiently coarse variations in these processes can produce a similar diversity to that among different models in terms of the global-mean profile and, to a lesser extent, the zonal-mean vertical position. However, there are features of certain models' profiles that cannot be reproduced, suggesting the influence of further structural differences between models. In HadGEM3-UKCA, convective transport is found to be very important in controlling the vertical profile of all aerosol components by mass. In-cloud scavenging is very important for all except mineral dust. Growth by condensation is important for sulfate and carbonaceous aerosol (along with aqueous oxidation for the former and ageing by soluble material for the latter). The vertical extent of biomass-burning emissions into the free troposphere is also important for the profile of carbonaceous aerosol. Boundary-layer mixing plays a dominant role for sea salt and mineral dust, which are emitted only from the surface. Dry deposition and below-cloud scavenging are important for the profile of mineral dust only. In this model, the microphysical processes of nucleation, condensation and coagulation dominate the vertical profile of the smallest particles by number (e.g. total CN >3 nm), while the profiles of larger particles (e.g. CN>100 nm) are controlled by the same processes as the component mass profiles, plus the size distribution of primary emissions. We also show that the processes that affect the AOD-normalised radiative forcing in the model are predominantly those that affect the vertical mass distribution, in particular convective transport, in-cloud scavenging, aqueous oxidation, ageing and the vertical extent of biomass-burning emissions.

dust↗
NASA NTRS1988

H2 spectroscopy and a diurnally changing cloud on Jupiter

Spectroscopic observations of H2 in specific longitude regions of Jupiter as they rotate from limb to limb are reported. Data obtained in the 3-0 S(0) and S(1) lines using a CCD detector and a spectrograph with either echelle or plane gratings at the Cassegrain focus of the 24-inch telescope at Whipple Observatory during April-June 1983 are presented in extensive tables and graphs and analyzed in detail, modeling spatial and temporal variations at seven latitudes. An east-to-west increase in the equivalent line widths is attributed to the combined action of internal and solar heating of a convective layer, resulting in diurnal changes in the vertical cloud structure. It is inferred that the hydrogen observed is mainly in an equilibrium thermodynamic state, with small amounts of nonequilibrium hydrogen at high altitudes.

Cunningham, Cindy C.↗
NASA NTRS1988

Coupling of the radiative, convective, and surface fluxes over the equatorial Pacific

An idealized energy-balance model for a closed tropical circulation is first presented to illustrate the coupling between the net tropospheric cooling, the surface fluxes, and the mean subsidence away from the precipitation zones. Then a one-dimensional diagnostic model and a radiation model with boundary layer clouds are combined to explore this coupling for a specific region, using mean sounding data over the tropical Pacific. The radiatively driven subsidence rate at the top of the convective boundary layer is approximately 35 mb/day and is largely independent of boundary layer cloud fraction. The sensitivity of the corresponding convective heat flux profiles to the mass divergence profile and cloud fraction within the boundary layer is explored. Reasonable assumptions give realistic surface sensible and latent heat fluxes for this region of approximately 10 and 130 W/sq m. The paper illustrates the important background climatic control of the radiation field on the tropical surface fluxes.

Ridgway, W.↗
DOE OSTI2022

Influences of Environmental Relative Humidity and Horizontal Scale of Subcloud Ascent on Deep Convective Initiation

This study examines two factors impacting initiation of moist deep convection: free-tropospheric environmental relative humidity (φ E ) and horizontal scale of subcloud ascent (R sub ), the latter exerting a dominant control on cumulus cloud width. A simple theoretical model is used to formulate a “scale selection” hypothesis: that a minimum R sub is required for moist convection to go deep, and that this minimum scale decreases with increasing φ E . Specifically, the ratio of R 2 sub to saturation deficit (1 - φ E ) must exceed a certain threshold value that depends on cloud-layer environmental lapse rate. Idealized, large-eddy simulations of moist convection forced by horizontally varying surface fluxes show strong sensitivity of maximum cumulus height to both φ E and R sub consistent with the hypothesis. Increasing R sub by only 300–400 m can lead to a large increase (>5 km) in cloud height. A passive tracer analysis shows that the bulk fractional entrainment rate decreases rapidly with R sub but depends little on φ E . However, buoyancy dilution increases as either R sub or φ E decreases; buoyancy above the level of free convection is rapidly depleted in dry environments when R sub is small. While deep convective initiation occurs with an increase in relative humidity of the near environment from moistening by earlier convection, the importance of this moisture preconditioning is inconclusive as it is accompanied by an increase in R sub . Overall, it is concluded that small changes to R sub driven by external forcing or by convection itself could be a dominant regulator of deep convective initiation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

Evaluation of Cloud-Resolving and Limited Area Model Intercomparison Simulations Using TWP-ICE Observations: Precipitation Microphysics - Part 2

Ten 3-D cloud-resolving model (CRM) simulations and four 3-D limited area model (LAM) simulations of an intense mesoscale convective system observed on 23-24 January 2006 during the Tropical Warm Pool-International Cloud Experiment (TWP-ICE) are compared with each other and with observations and retrievals from a scanning polarimetric radar, colocated UHF and VHF vertical profilers, and a Joss-Waldvogel disdrometer in an attempt to explain a low bias in simulated stratiform rainfall. Despite different forcing methodologies, similar precipitation microphysics errors appear in CRMs and LAMs with differences that depend on the details of the bulk microphysics scheme used. One-moment schemes produce too many small raindrops, which biases Doppler velocities low, but produces rainwater contents (RWCs) that are similar to observed. Two-moment rain schemes with a gamma shape parameter (mu) of 0 produce excessive size sorting, which leads to larger Doppler velocities than those produced in one-moment schemes but lower RWCs. Two-moment schemes also produce a convective median volume diameter distribution that is too broad relative to observations and, thus, may have issues balancing raindrop formation, collision-coalescence, and raindrop breakup. Assuming a mu of 2.5 rather than 0 for the raindrop size distribution improves one-moment scheme biases, and allowing mu to have values greater than 0 may improve excessive size sorting in two-moment schemes. Underpredicted stratiform rain rates are associated with underpredicted ice water contents at the melting level rather than excessive rain evaporation, in turn likely associated with convective detrainment that is too high in the troposphere and mesoscale circulations that are too weak. A limited domain size also prevents a large, well-developed stratiform region like the one observed from developing in CRMs, although LAMs also fail to produce such a region.

three dimensional models↗
NASA NTRS2021

Effect of volcanic emissions on clouds during the 2008 and 2018 Kilauea degassing events

Volcanic eruptions in otherwise clean environments are “natural experiments” wherein the effects of aerosol emissions on clouds and climate can be partitioned from meteorological variability and anthropogenic activities. In this work, we combined satellite retrievals, reanalysis products, and atmospheric modeling to analyze the mechanisms of aerosol–cloud interactions during two degassing events at the Kilauea volcano in 2008 and 2018. The eruptive nature of the 2008 and 2018 degassing events was distinct from long-term volcanic activity for Kilauea. Although previous studies assessed the modulation of cloud properties from the 2008 event, this is the first time such an analysis has been reported for the 2018 event and that multiple degassing events have been analyzed and compared at this location. Both events resulted in significant changes in cloud effective radius and cloud droplet number concentration that were decoupled from local meteorology and in line with an enhanced cloud albedo. However, it is likely that the effects of volcanic emissions on liquid water path and cloud fraction were largely offset by meteorological variability. Comparison of cloud anomalies between the two events suggested a threshold response of aerosol–cloud interactions to overcome meteorological effects, largely controlled by aerosol loading. In both events, the ingestion of aerosols within convective parcels enhanced the detrainment of condensate in the upper troposphere, resulting in deeper clouds than observed under pristine conditions. Accounting for ice nucleation on ash particles led to enhanced ice crystal concentrations at cirrus levels and a slight decrease in ice water content, improving the correlation of the model results with the satellite retrievals. Overall, aerosol loading, plume characteristics, and meteorology contributed to changes in cloud properties during the Kilauea degassing events.

Katherine H. Breen↗
NASA NTRS2002

Interaction Between Surface Heat Budgets, Sea Surface Temperature and Deep Convection in the Tropical Western Pacific

The surface heat budgets, sea surface temperature (SST), clouds and winds in the tropical western Pacific are analyzed and compared for the periods April-June 1998 and 1999. The spring of 1998 is in the later phase of a strong El Nino, whereas the spring of 1999 is in a period of a La Nina. The surface shortwave (SW) and longwave (LW) radiative fluxes are retrieved from Japanese Geostationary Meteorological Satellite radiance measurements, while the surface turbulent fluxes (latent and sensible heat) are derived from SSM/I-Inferred surface air humidity and winds. The SST and sea-air temperature differences are taken from NCEP/NCAR reanalysis. Deep convection is inferred from the outgoing longwave radiation of NOAA's polar-orbiting satellites. The longitudinal shift in maximum SST, deep convection and winds during El Nino and La Nina have a large impact on the spatial distribution of surface heating. Changes in clouds between these two periods have a large impact on the monthly-mean radiative heating, exceeding 60 W m(exp -2) over large oceanic regions. Similarly, the differences in wind speeds and SST have a large impact on the latent cooling, exceeding 40 W m(exp -2) over large oceanic areas. However, the maximum impacts on radiative and latent heat fluxes occur in different regions. The regions of maximum impact on radiative fluxes coincide with the regions of maximum change in clouds, whereas regions of maximum impact on turbulent heat fluxes coincide with the regions of maximum change in trade winds. The time-evolution of SST in relation to that of surface heat fluxes and winds are investigated and compared between the two El Nino and La Nina periods. In regions where wind speeds (or wind stresses) are large, the change in SST agrees well with the change in the net surface heating, indicating a deep ocean mixed layer associated with strong trade winds. On the other hand, in regions where radiative fluxes are large, the change in SST does not agree well with the change in the net surface heating, indicating the importance of solar radiation penetrating through the bottom of the shadow ocean mixed layer.

Chou, Shu-Hsien↗
NASA NTRS2010

NASA Giovanni Tool for Visualization and Analysis Support for the YOTC Program

The fundamental challenges to overcoming our shortcomings in understanding and modeling/predicting tropical convection have been two folds: I) the need to represent the broad range of scales applicable to the tropical organization problem (i.e. cumulus to planetary), and II) the lack of observations that adequately and simultaneously characterize this broad range of scales and that also provide three-dimensional information on thermodynamic, radiative and dynamical interactions, including cloud microphysical processes. Because the goal of Overview of Year Of Tropical Convection (YOTC) involves examining a scientifically complex, multi-scale "process", rather than documenting the characteristics of a single parameter (e.g., SST, cloud cover), YOTC has an IOP perspective that targets a period, May 2008 - April 2010, long enough to encompass many cases of tropical convection activity in many of its most challenging yet influential forms. This includes mesoscale and synoptic variability, easterly waves and hurricanes, convectively coupled waves, the MJO, and the culmination of these in terms of the monsoon, their interactions with the extra-tropics, and mean characteristics such as tropical-to-subtropical transitions. The YOTC time period and length are driven in part by the following: 1) keeping the multi-sensor/multi-platform and model-analyses data sets and associated infrastructure manageable, 2) facilitating a focused effort by the research and operational communities on a specific scientific problem, and 3) capitalizing on the recent key additions to the armada of satellites (e.g., CloudSat and CALIPSO).

Ostrenga, Dana↗
NASA NTRS1990

Convective dynamics - Panel report

Aspects of highly organized forms of deep convection at midlatitudes are reviewed. Past emphasis in field work and cloud modeling has been directed toward severe weather as evidenced by research on tornadoes, hail, and strong surface winds. A number of specific issues concerning future thrusts, tactics, and techniques in convective dynamics are presented. These subjects include; convective modes and parameterization, global structure and scale interaction, convective energetics, transport studies, anvils and scale interaction, and scale selection. Also discussed are analysis workshops, four-dimensional data assimilation, matching models with observations, network Doppler analyses, mesoscale variability, and high-resolution/high-performance Doppler. It is also noted, that, classical surface measurements and soundings, flight-level research aircraft data, passive satellite data, and traditional photogrammetric studies are examples of datasets that require assimilation and integration.

Carbone, Richard↗
NASA NTRS1991

Stratospheric soot - Cloud forming properties and transport processes

Soot enters the stratosphere either from the troposphere in deep thunderstorm convection, predominantly in the tropics, from midlatitude forest fires, and directly from aircraft flying above the tropopause. Particles emitted from jet aircraft are relatively ineffective as cloud droplet condensation nuclei (less than 1 percent) compared with those from forest fires (above 50 percent). Chemical and other modification during aging of the particles may influence these results in some circumstances; cloud nucleating properties can be used as a soot tracer. Such aerosols, as they grow to haze drops and ilute in increasing humidity, may form ice particles in the cold polar stratosphere or in tropical cumuli anvils at 18 to 20 km altitude at temperatures as low as -90 C. Ice may also form as particles are removed by descent through troposphere folds and enter midlatitude cirrus at levels below -40 C. In the stratosphere, ice particles may provide surfaces that catalyze heterogeneous chemical reactions; in the upper troposphere, the optical depths of cirrus clouds may be significantly increased.

Hallett, John↗
DOE OSTI2024

On CCN Effects upon Convective Cold Pool Timing and Features

Abstract Cold pools produced by deep convection can initiate new convection, and their representation in larger-scale weather and climate models could improve prediction of the extent and timing of upscale growth. Cold pools originate from latent cooling from precipitation changing phase, but little attention has been paid to microphysical influences on cold pool characteristics, particularly CCN effects. Datasets obtained from the CACTI and RELAMPAGO field campaigns, along with idealized numerical modeling, are utilized to investigate the hypothesis that convective storms forming in higher-CCN environments generate their first surface rainfall later, delaying cold pool initiation. Aircraft observations of CCN and shallow convection on 9 days do suggest a CCN effect. Those ingesting more CCN contained fewer drizzle drops, although a decreased cloud depth with increasing CCN was also likely a limiting factor. In three of those cases that later developed into deep convection, the timing of cold pool onset was not ubiquitously delayed in environments with more CCN. Idealized numerical simulations suggest that an ordinary thunderstorm can experience small delays in cold pool onset with increasing CCN due to changes in graupel production, but CCN effects on the cold pool from a supercell thunderstorm can be easily overpowered by its unique dynamics. A strong inverse relationship between cold pool strength, expansion rate, and depth with increasing CCN is suggested by the results of the ordinary thunderstorm simulation. Further consideration of CCN appears warranted for future cold pool parameterization development, but other environmental factors affecting storm morphology and precipitation cannot be ignored.

Meteorology & Atmospheric Sciences↗
DOE OSTI2019

Sub-cloud moist entropy curvature as a predictor for changes in the seasonal cycle of tropical precipitation

Convective Quasi-Equilibrium (CQE) may be a useful framework for understanding the precipitation minus evaporation (P-E) response to CO2-induced warming. To explore this proposition, a suite of aquaplanet simulations with a slab ocean from TRACMIP (the Tropical Rain belts with an Annual cycle and a Continent Model Intercomparison Project) is analyzed. A linear relationship between P-E and the curvature of sub-cloud moist entropy, a marker for the spatial distribution of sub-cloud moist energy and onset of a tropical direct overturning circulation under CQE conditions, is shown to exist across many of the TRACMIP simulations. Furthermore, this linear relationship is a skillful predictor of changes in P-E in response to CO2-induced warming. The curvature metric also shows improvement in predicting P-E changes compared to the simpler method of relating P-E directly to the sub-cloud moist entropy field or a simple ‘wet-get-wetter’ type null hypothesis, especially on seasonal and shorter timescales. Using fixed relative humidity in the curvature metric and sub-cloud moist entropy degrades their ability to predict P-E changes, implying that both temperature and relative humidity changes in the boundary layer are important for characterizing future precipitation changes. To understand why the curvature metric is a skillful predictor of hydrological changes, a moist static energy (MSE) budget analysis is performed, which shows that MSE divergence on sub-daily timescales is well parameterized as a downgradient diffusive process. Additionally, this transient MSE divergence has a similar structure to the curvature term. Assuming that the transient MSE divergence is related to convective activity, these findings suggest that the theoretical underpinning of the linear relationship between the curvature term and P-E resides in cloud processes that both remove spatial gradients of sub-cloud moist entropy and generate precipitation at sub-seasonal and shorter timescales.

aquaplanet simulations↗
NASA NTRS2001

Precipitation Efficiency in the Tropical Deep Convective Regime

Precipitation efficiency in the tropical deep convective regime is analyzed based on a 2-D cloud resolving simulation. The cloud resolving model is forced by the large-scale vertical velocity and zonal wind and large-scale horizontal advections derived from TOGA COARE for a 20-day period. Precipitation efficiency may be defined as a ratio of surface rain rate to sum of surface evaporation and moisture convergence (LSPE) or a ratio of surface rain rate to sum of condensation and deposition rates of supersaturated vapor (CMPE). Moisture budget shows that the atmosphere is moistened (dryed) when the LSPE is less (more) than 100 %. The LSPE could be larger than 100 % for strong convection. This indicates that the drying processes should be included in cumulus parameterization to avoid moisture bias. Statistical analysis shows that the sum of the condensation and deposition rates is bout 80 % of the sum of the surface evaporation rate and moisture convergence, which ads to proportional relation between the two efficiencies when both efficiencies are less han 100 %. The CMPE increases with increasing mass-weighted mean temperature and creasing surface rain rate. This suggests that precipitation is more efficient for warm environment and strong convection. Approximate balance of rates among the condensation, deposition, rain, and the raindrop evaporation is used to derive an analytical solution of the CMPE.

Li, Xiaofan↗
DOE OSTI2024

Investigating Mechanisms Driving Differences in the Characteristics of Precipitation in the E3SM Multiscale Modeling Framework With 2D Versus 3D Cloud Resolving Model Configurations

Abstract In this study, we compare the Energy Exascale Earth Systems Model (E3SM) multiscale modeling framework (MMF) with the cloud resolving model (CRM) configured in two (2dMMF) and three (3dMMF) dimensions. We explore how CRM dimensionality impacts the representation of mean and extreme precipitation characteristics. Our results show that tropical mean precipitation patterns are better represented in 3dMMF compared to observations (Integrated Multi‐satellitE Retrivals for GPM and Global Precipitation Climatology Project One Degree Daily products), while 2dMMF better captures extreme precipitation intensity, with systematic land‐ocean differences in precipitation and cloud‐associated variables. These differences are attributed to the co‐occurrence of CRM throttling (i.e., suppressed convection in due to smaller numbers of CRM columns and domain size) and dilution (i.e., 3‐D cloud circulations with increased entrainment and lower precipitation efficiency) effects. Overall, throttling results in more low‐level humidity in 2dMMF and dilution contributes to more high clouds with less precipitation efficiency in 3dMMF. Since throttling occurs more strongly over the ocean than land, the 3dMMF tends to have less cloud liquid and precipitation over the ocean and more cloud ice and precipitation over land. These results may serve as a guide for choosing the CRM structure to reduce precipitation and cloud‐related biases.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1986

Cloud cover estimation using bispectral satellite measurements

An algorithm has been developed for cloud cover estimation using bispectral satellite measurements. Based on the distribution of pixels in albedo-brightness temperature space, a number of threshold values are applied to identify those pixels which are most likely totally cloud filled. Mean cloudy-column albedo in a region much larger than a single pixel is then estimated and cloud cover computed. The algorithm has been applied to the International Satellite Cloud Climatology Project Geostationary Meteorological Satellite B2 data. Locations of tropical convective cells and the passage of fronts in higher latitudes are identified. Since these features represent the states of large-scale atmospheric circulations, it is concluded that the algorithm can yield consistent cloud data sets useful for climate studies.

Chou, M.-D.↗
NASA NTRS1988

Cloud pumping in a one-dimensional photochemical model

Cloud pumping data based on tropical maritime updraft statistics are incorporated in a one-dimensional steady-state eddy diffusive photochemical model of the troposphere. It is suggested that regions with weaker convection, such as the midlatitudes, may also experience substantial effects from cloud pumping. The direct effects of cloud pumping on CO were found to be more significant than implied by sensitivity studies. The (CH3)2S profile computed with cloud pumping agrees well with previous data.

Costen, Robert C.↗