SEARCH · Engineering Papers

Results for “Container”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

All sources NASA NTRS DOE OSTI

DOE OSTI2024

X-ray Photoelectron Spectroscopy Analysis of Nafion-Containing Samples: Pitfalls, Protocols, and Perceptions of Physicochemical Properties

X-ray photoelectron spectroscopy (XPS) is one of the most common techniques used to analyze the surface composition of catalysts and support materials used in polymer electrolyte membrane (PEM) fuel cells and electrolyzers, providing important insights for further improvement of their properties. Characterization of catalyst layers (CLs) is more challenging, which can be at least partially attributed to the instability of ionomer materials such as Nafion during measurements. This work explores the stability of Nafion during XPS measurements, illuminating and addressing Nafion degradation concerns. The extent of Nafion damage as a function of XPS instrumentation, measurement conditions, and sample properties was evaluated across multiple instruments. Results revealed that significant Nafion damage to the ion-conducting sulfonic acid species (>50% loss in sulfur signal) may occur in a relatively short time frame (tens of minutes) depending on the exact nature of the sample and XPS instrument. This motivated the development and validation of a multipoint XPS data acquisition protocol that minimizes Nafion damage, resulting in reliable data acquisition by avoiding significant artifacts from Nafion instability. The developed protocol was then used to analyze both thin film ionomer samples and Pt/C-based CLs. Comparison of PEM fuel cell CLs to Nafion thin films revealed several changes in Nafion spectral features attributed to charge transfer due to interaction with conductive catalyst and support species. This study provides a method to reliably characterize ionomer-containing samples, facilitating fundamental studies of the catalyst-ionomer interface and more applied investigations of structure-processing-performance correlations in PEM fuel cell and electrolyzer CLs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Carbonation and Sulfidation of Mg- and Ni-Containing Solutions: Implications for Carbon Mineralization and Critical Element Recovery

Carbonation of alkaline earth metals ( e.g. , magnesium (Mg)) and sulfidation of nickel (Ni) are promising methods to achieve concurrent carbon mineralization and selective Ni recovery. However, the coexistence of alkaline earth metals and Ni from silicate ores or mining wastewater complicates the carbonation and sulfidation owing to cation coprecipitation. To better understand simultaneous metal carbonation and Ni-sulfide formation, we used Mg- and Ni-containing solutions and systematically investigated the Mg and Ni coprecipitates’ phase transformation during sequential/concurrent carbonation and sulfidation. During a single carbonation process, hydromagnesite dehydrated and formed magnesite over time. Nickel bicarbonate formed and became a Mg–Ni carbonate solid solution because of their similar ionic radii. During a single sulfidation process, the pH did not affect Ni-sulfide formation, but it controlled Mg behavior. Specifically, at pH 9.6, brucite formed, while at pH 7.8, Mg 2+ remained in the solution. For the sequential carbonation–sulfidation process, Ni-carbonate formed during carbonation converted to Ni-sulfide because of the low Ni-sulfide K sp . For the sulfidation–carbonation process, Ni-sulfide remained the same even after carbonation and Mg-carbonate precipitates. For the concurrent carbonation and sulfidation process, Mg-carbonate and Ni-sulfide formed simultaneously. Finally, this study develops a scientific foundation of carbonation and sulfidation processes, benefiting coupled CO 2 storage and sulfide-enabled resource recovery.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2016

Tunneling across SAMs Containing Oligophenyl Groups

This paper reports rates of charge tunneling across self-assembled monolayers (SAMs) of compounds containing oligophenyl groups, supported on gold and silver, using Ga 2 O 3 /EGaIn as the top electrode. It compares the attenuation constant, $β$, and the pre-exponential parameter, $J_0$, of the simplified Simmons equation across oligophenyl groups (R = Ph n ; n = 1, 2, 3) with three different anchoring groups (thiol, HSR; methanethiol, HSCH 2 R; and acetylene, HC≡CR) that attach R to the template-stripped gold or silver substrate. The results demonstrate that the structure of the molecular linker between the anchoring group (-S- or -C≡C-) and the oligophenyl moiety significantly influences the rate of charge transport. SAMs of SPh n and C≡CPh n on gold show similar values of $β$ and log $|J_0|$ ($β$ = 0.28 ± 0.03 Å$^{–1}$ and log $|J_0|$ = 2.7 ± 0.1 for Au/SPhn; $β$ = 0.30 ± 0.02 $Å^{–1}$ and log $|J_0|$ = 3.0 ± 0.1 for Au/C≡CPh n ). The introduction of a single intervening methylene (CH 2 ) group between the anchoring sulfur atom and the aromatic units generates SAMs of SCH2Phn and increases $β$ to ca. 0.66 ± 0.06 $Å^{–1}$ on both gold and silver substrates. (For n-alkanethiolates on gold, the corresponding values are $β$ = 0.76 ± 0.03 $Å^{–1}$ and log $|J)0|$ = 4.2 ± 0.2). Density functional theory calculations indicate that the highest occupied molecular orbitals (HOMOs) of both SPh n and C≡CPh n extend beyond the anchoring group and onto the phenyl rings; SAMs composed of these two groups of molecules result in indistinguishable rates of charge transport. The introduction of the CH 2 group, to generate SCH 2 Ph n , disrupts the delocalization of the orbitals, localizes the HOMO on the anchoring sulfur atom, and results in the experimentally observed increase in $β$ to a value closer to that of a SAM of n-alkylthiolate molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Effect of Surface Alignment on Connectivity in Phosphonium-Containing Diblock Copolymer Anion-Exchange Membranes

The performance of ion-exchange membranes in fuel cells is critically linked to their ion-conducting morphology. In this report, we analyzed the connectivity of anion-exchange membranes (AEMs) by electrostatic force microscopy (EFM). As a tapping-mode AFM-based technique, EFM probes height, phase, and electrostatic force gradient through two-pass interleave scans, which reveals the direct relationship between membrane surface morphology and connectivity of the ionic domain. The AEMs are diblock copolymers of a polyisoprene (PIp) block and a polystyrenic block containing the phosphonium ion (P(R3P+)MS). Different alignments of cylinders were observed in the bulk and on the surface for AEMs with different ionexchange capacities (IECs) and preparation methods. The impacts of the cylinder alignment on the connectivity of the ionic domain were then investigated by EFM. For AEM 13 with IEC = 0.44 mmol/g and a hexagonal morphology, cylinders aligned parallel to the surface, which led to many disconnected regions observed throughout the membrane. In contrast, the perpendicularly aligned channels of AEM 16 with IEC = 0.87 mmol/g consisted only of a well-connected ionic phase throughout the membrane.

25 ENERGY STORAGE↗

DOE OSTI2021

Interlayer Triplet Energy Transfer in Dion–Jacobson Two-Dimensional Lead Halide Perovskites Containing Naphthalene Diammonium Cations

Recently, hybrid perovskites have gained attention as sensitizers for molecular triplet generation. Layered, two-dimensional (2D) perovskites are especially well-suited for this purpose because the triplet donor (inorganic framework) and triplet acceptor (organic layer) are self-assembled into adjacent sheets, so that with the appropriate energetics, triplets can be driven across the interface. Here we examine interlayer energy transfer in a series of mixed-halide Dion–Jacobson 2D perovskites containing divalent naphthalene cations. We find that the sensitized phosphorescence in these compounds is dominated by naphthalene triplet excimer emission, but when the inorganic exciton is tuned near resonance with the naphthalene triplet, naphthalene monomer phosphorescence competes with triplet excimer formation. The interlayer energy-transfer process is further revealed by ultrafast transient absorption spectroscopy through kinetic variations in triplet excimer formation times. Ultimately, gaining control over interlayer interactions in 2D perovskites through cation design will help uncover new functions and applications for these materials.

2D perovskite↗

DOE OSTI2020

Metagenome-Guided Proteomic Quantification of Reductive Dehalogenases in the Dehalococcoides mccartyi -Containing Consortium SDC-9

At groundwater sites contaminated with chlorinated ethenes, fermentable substrates are often added to promote reductive dehalogenation by indigenous or augmented microorganisms. Contemporary bioremediation performance monitoring relies on nucleic acid biomarkers of key organohalide-respiring bacteria, such as Dehalococcoides mccartyi (Dhc). In this work, metagenome sequencing of the commercial, Dhc-containing consortium, SDC-9, identified 12 reductive dehalogenase (RDase) genes, including pceA (two copies), vcrA, and tceA, and allowed for specific detection and quantification of RDase peptides using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Shotgun (i.e., untargeted) proteomics applied to the SDC-9 consortium grown with tetrachloroethene (PCE) and lactate identified 143 RDase peptides, and 36 distinct peptides that covered greater than 99% of the protein-coding sequences of the PceA, TceA, and VcrA RDases. Quantification of RDase peptides using multiple reaction monitoring (MRM) assays with 13 C-/ 15 N-labeled peptides determined 1.8 × 10 3 TceA and 1.2 × 10 2 VcrA RDase molecules per Dhc cell. Ultimately, the MRM mass spectrometry approach allowed for sensitive detection and accurate quantification of relevant Dhc RDases and has potential utility in bioremediation monitoring regimes.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2017

Early Stage Anodic Instability of Glassy Carbon Electrodes in Propylene Carbonate Solvent Containing Lithium Hexafluorophosphate

In this paper, irreversible changes to the morphology of glassy carbon (GC) electrodes at potentials between 3.5 and 4.5 V vs Li/Li + in propylene carbonate (PC) solvent containing lithium hexafluorophosphate (LiPF 6 ) are reported. Analysis of cyclic voltammetry (CV) experiments in the range of 3.0 to 6.0 V shows that the capacitance of the electrochemical double -layer increased irreversibly beginning at potentials as low as 3.5 V. These changes resulted from nonfaradaic interactions, and were not due to oxidative electrochemical decomposition of the electrode and electrolyte, anion intercalation, nor caused by the presence of water, a common impurity in organic electrolyte solutions. Atomic force microscopy (AFM) images revealed that increasing the potential of a bare GC surface from 3.0 to 4.5 V resulted in a 6X increase in roughness, in good agreement with the changes in double -layer capacitance. Treating the GC surface via exposure to trichloromethylsilane vapors resulted in a stable double -layer capacitance between 3.0 and 4.5 V, and this treatment also correlated with less roughening. Lastly, these results inform future efforts aimed at controlling surface composition and morphology of carbon electrodes.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Organic Semiconductor-Containing Supramolecules: Effect of Small Molecule Crystallization and Molecular Packing

Small molecules (SMs) with unique optical or electronic properties provide an opportunity to incorporate functionality into block copolymer (BCP)-based supramolecules. However, the assembly of supramolecules based on these highly crystalline molecules differs from their less crystalline counterparts. In this work, two families of organic semiconductor SMs are investigated, where the composition of the crystalline core, the location (side- vs end-functionalization) of the alkyl solubilizing groups, and the constitution (branched vs linear) of the alkyl groups are varied. With these SMs, we present a systematic study of how the phase behavior of the SMs affects the overall assembly of these organic semiconductor-based supramolecules. The incorporation of SMs has a large effect on the interfacial curvature, the supramolecular periodicity, and the overall supramolecular morphology. The crystal packing of the SM within the supramolecule does not necessarily lead to the assembly of the comb block within the BCP microdomains, as is normally observed for alkyl-containing supramolecules. An unusual lamellar morphology with a wavy interface between the microdomains is observed due to changes in the packing structure of the small molecule within BCP microdomains. Since the supramolecular approach is modular and small molecules can be readily switched out, present studies provide useful guidance toward access supramolecular assemblies over several length scales using optically active and semiconducting small molecules.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Electrocatalytic Hydrogen Production by a Nickel Complex Containing a Tetradentate Phosphine Ligand

A nickel complex has been synthesized that contains the P4N2 ligand, a tetradendate phosphine ligand with two pendant amines in the ligand backbone. The rigidly square planar Ni(P4N2)2+ complex is an active electrocatalyst for reduction of protons to hydrogen. Using N,N-dimethylformamidium as the acid in wet acetonitrile solution, Ni(P4N2)2+ displays a turnover frequency of 1.6 × 106 s–1, which is among the fastest rates reported for any molecular electrocatalyst. This high catalytic rate comes at the cost of a 1200 mV overpotential at the catalytic half wave potential. The Ni(II) state of the catalyst was found to be stable under strongly acidic conditions, with only trace decomposition observed over two weeks in the presence of 0.1 M trifluoromethanesulfonic acid. The catalyst was less stable in the Ni(0) state due to the inability of the rigid P4N2 ligand to adopt a tetrahedral geometry. Using variable scan rate cyclic voltammetry, a first order rate constant of ~1 s–1 was measured for dissociation of a phosphine from Ni(0), which is proposed to be a key step for determining the lifetime of the catalyst during electrolysis. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory is operated by Battelle for DOE.

Klug, Christina↗

DOE OSTI2019

Synthesis and Anion Recognition Features of a Molecular Cage Containing Both Hydrogen Bond Donors and Acceptors

A molecular cage, macrobicycle 2 , containing amide and pyrrole groups as hydrogen-bonding donors and imine groups as hydrogen-bonding acceptors has been synthesized. Compound 2 was discovered to recognize tetrahedral oxyanions with high affinities, such as H 2 PO 4 – , HSO 4 – , SO 4 2– , and HP 2 O 7 3– , as well as the spherical halide anions, in chloroform. A single-crystal X-ray diffraction analysis illustrated that compound 2 formed a 1:1 complex with H 2 PO 4 – in the solid state

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Layer-by-Layer Assembled Films of Perylene Diimide- and Squaraine-Containing Metal–Organic Framework-like Materials: Solar Energy Capture and Directional Energy Transfer

Here, we demonstrate that thin films of metal organic framework (MOF)-like materials, containing two perylenedlimides (PDICl 4 , PDIOPh 2 ) and a squaraine dye (S1); can be fabricated by, layer-by-layer assembly (LbL). Interestingly, these LbL films absorb across the visible light region (400-750 nm) and facilitate directional energy transfer. Due to the high spectral overlap and oriented transition dipole moments of the donor (PDICl 4 and PDIOPh 2 ) and acceptor (S1) components, directional long-range energy transfer from the bluest to reddest absorber was successfully demonstrated in the multicomponent MOF-like films. These findings have significant implications for the development of solar energy conversion devices based on MOFs.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Laser-Induced CO 2 Generation from Gold Nanorod-Containing Poly(propylene carbonate)-Based Block Polymer Micelles for Ultrasound Contrast Enhancement

Poly(propylene carbonate) (PPC) decomposes at high temperature to release CO 2 . Here, this CO 2 -generation temperature of PPC can be reduced down to less than 80 °C with the aid of a photoacid generator (PAG). In the present work, we demonstrate that using an additional helper component, surface plasmonic gold nanorods (GNRs), the PPC degradation reaction can also be initiated by near infrared (NIR) irradiation. For this purpose, a PPC-containing nanoparticle formulation was developed in which PPC-based amphiphilic block copolymers (BCPs), poly(poly(ethylene glycol) methacrylate-b-propylene carbonate-b-poly(ethylene glycol) methacrylate) (PPEGMA-PPC-PPEGMA), were self-assembled with GNRs and PAG molecules via solvent exchange; under NIR irradiation GNRs produce heat that can cause PPC to decompose into CO 2 , and PAG (after UV pre-treatment) catalyzes this PPC degradation process.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Stable Hydrazone-Linked Covalent Organic Frameworks Containing O,N,O'-Chelating Sites for Fe(III) Detection in Water

Two stable crystalline hydrazone-linked covalent organic frameworks (COFs) (Bth-Dha and Bth-Dma) containing functional O,N,O'-chelating sites have been designed and successfully synthesized by the Schiff-base condensation reactions between benzene-1,3,5-tricarbohydrazide (Bth) and 2,5-dihydroxyterephthalaldehyde (Dha) or 2,5-dimethoxyterephthal-aldehyde (Dma), respectively. Bth-Dma exhibits strong fluorescence in the solid state and in an aqueous dispersion, while no fluorescence can be observed for Bth-Dha. Interestingly, the as-synthesized Bth-Dma can be used as a turn-off fluorescence sensor for the Fe(III) ion in aqueous solution with outstanding selectivity and sensitivity. Here, the recognition process can be attributed to the coordination interaction between Fe(III) ion and the O,N,O'-chelating sites in the pore wall of Bth-Dma COF, as verified by X-ray photoelectron spectroscopy and 1 H NMR spectroscopy. To the best of our knowledge, this is the first report on the rational design of luminescent COF with predesigned O,N,O'-chelating sites as a fluorescence sensor for highly selective and sensitive metal ion detection. This work may pave the way for designing luminescent COF sensors with functional binding sites for detecting specific metal ions.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Mechanically and Thermally Enhanced 3D-Printed Photocurable Polymer Nanocomposites Containing Functionalized Chitin Nanowhiskers by Stereolithography

Additive manufacturing, or simply 3D printing (3DP), where objects are built through layer-wise material deposition, has gained significant academic and industrial attention as a result of the development of advanced and functional materials requiring rapid, customized, and flexible solutions. In the context of green manufacturing, diversifying environmentally and economically sustainable material portfolios is an essential endeavor for the success of 3DP technology that uses widely available, highly valuable, and renewable materials. Here, we used stereolithography (SLA) for processing methacrylate-based photocurable resins containing crab shell-derived chitin nanowhiskers (CNWs), which are surface-functionalized by reactive acrylate groups. Results from full spectral, thermal, structural, and topological analyses corroborate not only the surface functionalization of CNWs but also indicate the presence of these photocurable CNW (pCNW) fillers in the 3D-printed nanocomposites. Owing to the strong interfacial bond induced by the physical and chemical crosslinking between the pCNW and methacrylate (MA) polymer matrix, the internally formulated nanocomposites displayed enhanced thermomechanical properties (e.g., storage modulus and glass transition temperature) compared to those of commercially available pure SLA resins. For instance, the inclusion of 0.5 wt % pCNW improved the tensile strength and stiffness to up to 78 and 71%, respectively, without compromising the toughness and ductility of the printed material. Accordingly, this result also evidences the compatibility between the filler and resin materials. Consequently, the formation of a crosslinked network in the nanocomposite structure results in a higher thermal stability and activation energy (i.e., up to ~79%) for all the hybrid materials than the pristine MA. Finally, the high-resolution SLA print features, dimensional accuracy, and enhanced mechanical performance of our microstructure-forming functionalized chitin-based nanocomposites make them promising materials for a wide range of robust and high-performance industrial applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Identification and Mitigation of Inhibitory Substances Contained in High-Salinity Crude Glycerol Generated from Biodiesel Production for Polyhydroxyalkanoate Synthesis by Haloferax mediterranei

High-salinity crude glycerol generated from biodiesel production poses significant challenges to microbial valorization due to inhibitory ingredients that severely limit microbial growth. This study identified and mitigated inhibitory substances contained in high-salinity glycerol sludge to enable its conversion to polyhydroxyalkanoates (PHAs) by the extreme halophilic archaeon Haloferax mediterranei. The long-chain fatty acids (LCFAs) were consistently identified as the primary inhibitors by liquid chromatography−mass spectrometry, Fourier transform infrared spectroscopy, and ultraviolet−visible spectroscopy. Acid precipitation at pH 2 efficiently removed these LCFAs, substantially reducing the required feedstock dilution from 23 to 3 times, improving PHA titer by 40%. Furthermore, this dilution reduction also increased the feedstock salinity utilization, achieving a 46% reduction in external salt supplementation for H. mediterranei growth. In contrast, overliming and arrested anaerobic digestion were confirmed to be ineffective in inhibitor removal. This study provides deep insights into inhibitor chemistry and presents acid precipitation as an effective pretreatment strategy for waste valorization of highsalinity crude glycerol.

LC-MS↗

DOE OSTI2019

Toward Environmentally Friendly Lithium Sulfur Batteries: Probing the Role of Electrode Design in MoS 2 -Containing Li–S Batteries with a Green Electrolyte

While lithium sulfur batteries (Li–S) hold promise as future high energy density low cost energy storage systems, barriers to implementation include low sulfur loading, limited cycle life, and the use of toxic electrolyte solvents. A comprehensive study of Li–S cells in the environmentally benign di(propylene glycol) dimethyl ether (DPGDME)-based electrolyte, using as-prepared MoS 2 nanosheets derived from a facile aqueous microwave synthesis as polysulfide trapping agents, is reported herein for the first time. Conventional coated foil electrodes and binder-free electrodes (BFEs) with various structures are systematically generated and tested to correlate electrode design with the resulting electrochemical behavior. Significantly improved Li–S electrochemistry is demonstrated through the synergy of MoS 2 chemistry and binder-free electrode engineering. In the coating configuration, the MoS 2 -containing cell evinced better rate performance and more stable cyclability than the cell without MoS 2 . In comparison with the coating counterparts, the BFE cells exhibited excellent cycle stability and superior rate capability (10-fold capacities and energy density per electrode weight with 20% higher retention rate) despite 2X higher areal sulfur loading. As a result, the BFE cell improvement can be attributed to the synergistic effect of the i) interconnected macroporous structure of CNT interlayers, providing a conductive framework, and ii) the efficient polysulfide trapping by the MoS 2 nanosheets.

25 ENERGY STORAGE↗

DOE OSTI2015

Enzymatic Mechanism of Copper-Containing Nitrite Reductase

Copper-containing nitrite reductases (CuNiRs) catalyze the reduction of nitrite to nitric oxide, a key step in the denitrification process that maintains balance between organic and inorganic nitrogen. Despite their importance, their functioning is not well understood. In this work, we carry out first-principles calculations and show that the available structural data are consistent only with a single mechanism. For this mechanism, we determine the activation energies, transition states, and minimum energy pathways of CuNiR. The calculations lead to an updated enzymatic mechanism and resolve several controversial issues. In particular, our work identifies the origins of the two protons necessary for the enzymatic function and shows that the transformation from the initial O-coordination of substrate to the final N-coordination of product is achieved by electron transfer from T 1 copper to T 2 copper, rather than by the previously reported side-on coordination of a NO intermediate, which only takes place in the reduced enzyme. Further, we also examine the role of structural change in the critical residue Asp 98 , reported in one experimental study, and find that while the structural change affects the energetics of substrate attachment and product release at the T 2 copper reaction center, it does not significantly affect the activation energy and reaction pathways of the nitrite reduction process.

Anions↗

DOE OSTI2013

Recent advances in hydrotreating of pyrolysis bio-oil and its oxygen-containing model compounds

There is considerable world-wide interest in discovering renewable sources of energy that can substitute for fossil fuels. Lignocellulosic biomass, which is the most abundant and inexpensive renewable feedstock on the planet, has a great potential for sustainable production of fuels, chemicals, and carbon-based materials. Fast pyrolysis integrated with hydrotreating is one of the simplest, most cost-effective and most efficient processes to convert lignocellulosic biomass to liquid hydrocarbon fuels for transportation, which has attracted significant attention in recent decades. However, effective hydrotreating of pyrolysis bio-oil presents a daunting challenge to the commercialization of biomass conversion via pyrolysis-hydrotreating. Specifically, development of active, selective, and stable hydrotreating catalysts is the bottleneck due to the poor quality of pyrolysis bio-oil feedstock (high oxygen content, molecular complexity, coking propensity, and corrosiveness). Significant research has been conducted to address the practical issues and provide the fundamental understanding of the hydrotreating/hydrodeoxygenation (HDO) of bio-oils and their oxygen-containing model compounds, including phenolics, furans, and carboxylic acids. A wide range of catalysts have been studied, including conventional Mo-based sulfide catalysts and noble metal catalysts, with the latter being the primary focus of the recent research because of their excellent catalytic performances and no requirement of environmentally unfriendly sulfur. The reaction mechanisms of HDO of model compounds on noble metal catalysts as well as their efficacy for hydrotreating or stabilization of bio-oil have been recently reported. This review provides a survey of the relevant literatures of recent 10 years about the advances in the understanding of the HDO chemistry of bio-oils and their model compounds mainly on noble metal catalysts.

biomass, lignocellulose, pyrolysis bio-oil, hydrod↗