Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Composition of the Martian dust as derived by infrared spectroscopy from Mariner 9

The Martian dust spectra obtained by the infrared interferometer spectrometer (Iris) experiment on Mariner 9 have been compared with modeling computations for various minerals and rocks. The model used was based upon a recently developed theory of absorption and scattering by particulate materials. The results indicate that the composition of Martian dust is biased toward silicate structures which involve a high degree of silicate oxygen sharing. A feldspar-rich dust of approximately 1-micron particle size appears to be the best candidate, although sheet-structure silicates cannot be ruled out.

Aronson, J. R.↗

Interpretation of the silver L X-ray spectrum

Analysis of the Ag L-series X-ray spectrum has been performed, based on relaxed-orbital relativistic transition-energy calculations. Satellite energies were computed in intermediate coupling. It is found that satellites arising from LN double-hole states generally fall within the natural width of the parent diagram lines. Contrary to previous assumption, the observed high-energy satellites are due to LM double-hole states produced by L1-L3M4,5 Coster-Kronig transitions and by shakeoff. The observed peak structure in the satellite spectrum is due to multiplet splitting of the initial and final double-hole states. Theoretical L1-L3M4,5 transition rates based on the Coster-Kronig energies computed by Chen et al. (1977) are closer to experiment than previous results, but still are too large by a factor of about 2, indicating an as-yet undetected flaw in the theory.

Chen, M. H.↗

Two measures of performance in a peg-in-hole manipulation task with force feedback

The results are described from two manipulators on a peg-in-hole task, which is part of a continued effort to develop models for human performance with remote manipulators. Task difficulty is varied by changing the diameter of the peg to be inserted in a 50 mm diameter hole. An automatic measuring system records the distance between the tool being held by the manipulator and the receptacle into which it is to be inserted. The data from repeated insertions are processed by computer to determine task times, accumulated distances, and trajectories. Experiments with both the MA-11 cable-connected master-slave manipulator common to hot cell work and the MA-23 servo-controlled manipulator (with and without force feedback) are described. Comparison of these results with previous results of the Ames Manipulator shows that force feedback provides a consistent advantage.

Hill, J. W.↗

Radiative cooling in shock-heated hydrogen-helium plasmas

Axial and off-axis radiative cooling of cylindrical shock-heated hydrogen-helium plasmas is investigated theoretically and experimentally. The coupled fluid dynamic-radiative transfer equations are solved by a combination of approximation techniques aimed at simplifying the computation of the flux divergence term, namely, the quasi-isothermal approximation and the exponential approximation developed for the solid angle integration. The accuracy of the approximation schemes has been assessed and found acceptable for applying the methods to the rapid computation of the radiatively coupled flow problem. Radiative cooling experiments were conducted in a 6-inch annular arc accelerator shock tube (ANAA) for an initial pressure of 1 torr and shock speeds from 35 to 45 Km/sec. The results indicate that the lateral cooling is small compared with the axial cooling, and that better agreement is achieved between the data and the theoretical results by inclusion of the lateral temperature gradient.

Poon, P. T. Y.↗

A 'special effort' to provide improved sounding and cloud-motion wind data for FGGE

Enhancement and editing of high-density cloud motion wind assessments and research satellite soundings have been necessary to improve the quality of data used in The Global Weather Experiment. Editing operations are conducted by a man-computer interactive data access system. Editing will focus on such inputs as non-US satellite data, NOAA operational sounding and wind data sets, wind data from the Indian Ocean satellite, dropwindsonde data, and tropical mesoscale wind data. Improved techniques for deriving cloud heights and higher resolution sounding in meteorologically active areas are principal parts of the data enhancement program.

Greaves, J. R.↗

The Karhunen-Loeve, discrete cosine, and related transforms obtained via the Hadamard transform

A general class of even/odd transforms is presented that includes the Karhunen-Loeve transform, the discrete cosine transform, the Walsh-Hadamard transform, and other familiar transforms. The more complex even/odd transforms can be computed by combining a simpler even/odd transform with a sparse matrix multiplication. A theoretical performance measure is computed for some even/odd transforms, and two image compression experiments are reported.

Jones, H. W.↗

LeRC reduced gravity fluid management technology program

A survey of the reduced gravity fluid management technology program is presented. Information on reduced gravity fluid behavior, techniques for thermal control of cryogenic tankage, and design for fluid management systems are discussed. The development of Spacelab experiments, propellant management systems for orbit transfer vehicles, and computer techniques for simulating reduced gravity fluid dynamic processes is reported.

Aydelott, J. C.↗

Simple approximations for the asymptotic description of the interaction between a normal shock wave and a turbulent boundary layer at transonic speeds

The asymptotic description of the interaction between a normal shock wave and a turbulent boundary layer is reviewed. The layers necessary in a rational analysis of the interaction are discussed with emphasis on the differences from an interaction with a laminar boundary layer, the uncoupling of solutions for the distribution of pressure and skin friction at the wall, and the role of the Reynolds shear stress in these solutions. The accuracy of asymptotic solutions in flows at Reynolds numbers of technical interest is discussed. Solutions for the distribution of pressure and skin friction at the wall and the shape of the shock are considered for the case where the flow is near separation. For the pressure and skin friction, it is possible to write two simplified partial solutions, one valid at the beginning of the interaction and one valid somewhat downstream of the shock wave. A solution composed of these two parts and a linear interpolation between them appears to give good comparison with experiment; one unknown constant, independent of the parameters of the interaction, must be found from experiment. The simplified relations are presented. Comparison of numerical computations with experimental data indicates a possible value for the constant and shows quite satisfactory results.

Adamson, T. C., Jr.↗

Television broadcast from space systems: Technology, costs

Broadcast satellite systems are described. The technologies which are unique to both high power broadcast satellites and small TV receive-only earth terminals are also described. A cost assessment of both space and earth segments is included and appendices present both a computer model for satellite cost and the pertinent reported experience with the Japanese BSE.

Cuccia, C. L.↗

NASA/RAE collaboration on nonlinear control using the F-8C digital fly-by-wire aircraft

Design procedures are reviewed for variable integral control to optimize response (VICTOR) algorithms and results of preliminary flight tests are presented. The F-8C aircraft is operated in the remotely augmented vehicle (RAV) mode, with the control laws implemented as FORTRAN programs on a ground-based computer. Pilot commands and sensor information are telemetered to the ground, where the data are processed to form surface commands which are then telemetered back to the aircraft. The RAV mode represents a singlestring (simplex) system and is therefore vulnerable to a hardover since comparison monitoring is not possible. Hence, extensive error checking is conducted on both the ground and airborne computers to prevent the development of potentially hazardous situations. Experience with the RAV monitoring and validation procedures is described.

Butler, G. F.↗

The structure of the plasma sheet-lobe boundary in the Earth's magnetotail

The structure of the magnetotail plasma sheet-plasma lobe boundary was studied by observing the properties of tailward flowing O+ ion beams, detected by the ISEE 2 plasma experiment inside the boundary during three time periods. The computed value of the north-south electric field component as well as the O+ parameters are shown to change at the boundary. The results are related to other observations made in this region. The O+ parameters and the Ez component behavior are shown to be consistent with that expected from the topology of the electric field lines in the tail as mapped from the ionosphere.

Orsini, S.↗

The structure of the plasma sheet-lobe boundary in the earth's magnetotail

The structure of the magnetotail plasma sheet-plasma lobe boundary was studied by observing the properties of tailward flowing O+ ion beams, detected by the ISEE 2 plasma experiment inside the boundary during three time periods. The computed value of the north-south electric field component as well as the O+ parameters are shown to change at the boundary. The results are related to other observations made in this region. The O+ parameters and the Ez component behavior are shown to be consistent with that expected from the topology of the electric field lines in the tail as mapped from the ionosphere. Previously announced in STAR as N84-13049

Orsini, S.↗

Integral boundary-layer models for turbulent separated flows

Two-dimensional, integral boundary-layer methods of the entrainment and dissipation type, with closure relationships which account for turbulent separated flows through the velocity and turbulence models, are developed. Kinematic shape factor relations used in the two methods are evaluated by comparison with recently obtained experimental data for separated flows. Prescribed-displacement-thickness computations are made with both methods and compared to experiment for a series of separated flows, including low speed and transonic shock-induced separation. Effects of upstream history on the turbulent shear stress development are shown to be important for the accurate prediction of the separated flows considered and the experimental trends are reasonably modeled by a rate equation derived from the turbulent kinetic energy equation.

Thomas, J. L.↗

Implicit TVD schemes for hyperbolic conservation laws in curvilinear coordinates

The Harten (1983, 1984) total variation-diminishing (TVD) schemes, constituting a one-parameter explicit and implicit, second-order-accurate family, have the property of not generating spurious oscillations when applied to one-dimensional, nonlinear scalar hyperbolic conservation laws and constant coefficient hyperbolic systems. These methods are presently extended to the multidimensional hyperbolic conservation laws in curvilinear coordinates. Means by which to linearize the implicit operator and solution strategies, in order to improve the computation efficiency of the implicit algorithm, are discussed. Numerical experiments with steady state airfoil calculations indicate that the proposed linearized implicit TVD schemes are accurate and robust.

Yee, H. C.↗

Spectral measurement of the Space Shuttle leeside shock layer and wake

Leeside shock layer and wake spectral radiation measured during the high altitude portion of the reentry of Space Shuttle Orbiter STS 51-D are presented and are compared with similar measurements obtained in an arc jet tunnel. The spectra, measured with a low-resolution spectral camera, are compared in order to identify the radiating species in a wavelength range from 4000 to 8000 angstroms. Emissions identified are: N2 first positive and N2 second positive systems, the N2(+) first negative system, and the sodium-D lines. No atomic air species or CN are observed. The spectra and procedure will be of use in comparison of flight flowfield properties with computational predictions and for guidance in developing future flight experiments.

Blackwell, H. E.↗

Influence of analysis and design models on minimum weight design

The results of numerical experiments designed to illustrate how the minimum weight design, accuracy, and cost can be influenced by: (1) refinement of the finite element analysis model and associated load path problems, and (2) refinement of the design variable linking model are examined. The numerical experiments range from simple structures where the modelling decisions are relatively obvious and less costly to the more complex structures where such decisions are less obvious and more costly. All numerical experiments used employ the dual formulation in ACCESS-3 computer program. Guidelines are suggested for creating analysis and design models that predict a minimum weight structure with greater accuracy and less cost. These guidelines can be useful in an interactive optimization environment and in the design of heuristic rules for the development of knowledge-based expert optimization systems.

Salama, M.↗

Flowfield characteristics of an axisymmetric 180-degree turnaround duct

In an attempt to provide an experimental database for computational fluid dynamics turbulence code evaluation and development, an experiment was conducted using an annular axisymmetric 180-deg turnaround passage through which air flows at close to ambient conditions. Measurements made at a nominal gap Reynolds number of 100,000 are presented; these are the static and fluctuating wall pressure distributions and the one- and two-component velocity profiles at various stations upstream, through, and downstream of the bend. Because of the large favorable pressure gradients on the inner wall up to 51 degrees, the flow experiences a large acceleration close to the wall; enhanced mixing occurs close to the outer wall. Downstream of this location, the flow close to the inner wall experiences an adverse pressure gradient before separating at about 150 degrees.

Ostermier, B. J.↗

Numerical solutions of the complete Navier-Stokes equations

The physical phenomena within supersonic flows that sustain chemical reactions are investigated. An earlier study to develop accurate physical models for supersonic reacting flowfields focused on 2-D laminar shear layers. The objective is to examine the mixing and subsequent combustion within turbulent reacting shear layers. To conduct this study, a computer program has been written to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method uses a cell-centered finite volume approach and a Runge Kutta time stepping scheme. The Reynolds averaged equations are closed using the eddy viscosity concept. Several zero-equation models have been tested by making calculations for an H2-air nonreacting coaxial jet flow. Comparisons made with experimental data show that Cohen's eddy viscosity model provides best agreement. The finite rate chemistry model used in the study of 2-D laminar shear layers is incorporated into the computer program and data is compared from a recent experiment performed at NASA Langley.

Hassan, H. A.↗