Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparative Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Sn{sub x}[BPO{sub 4}]{sub 1-x} composites as negative electrodes for lithium ion cells: Comparison with amorphous SnB{sub 0.6}P{sub 0.4}O{sub 2.9} and effect of composition

A comparative study of two Sn-based composite materials as negative electrode for Li-ion accumulators is presented. The former SnB{sub 0.6}P{sub 0.4}O{sub 2.9} obtained by in-situ dispersion of SnO in an oxide matrix is shown to be an amorphous tin composite oxide (ATCO). The latter Sn{sub 0.72}[BPO{sub 4}]{sub 0.28} obtained by ex-situ dispersion of Sn in a borophosphate matrix consists of Sn particles embedded in a crystalline BPO{sub 4} matrix. The electrochemical responses of ATCO and Sn{sub 0.72}[BPO{sub 4}]{sub 0.28} composite in galvanostatic mode show reversible capacities of about 450 and 530 mAh g{sup -1}, respectively, with different irreversible capacities (60% and 29%). Analysis of these composite materials by {sup 119}Sn Moessbauer spectroscopy in transmission (TMS) and emission (CEMS) modes confirms that ATCO is an amorphous Sn{sup II} composite oxide and shows that in the case of Sn{sub 0.72}[BPO{sub 4}]{sub 0.28}, the surface of the tin clusters is mainly formed by Sn{sup II} in an amorphous interface whereas the bulk of the clusters is mainly formed by Sn{sup 0}. The determination of the recoilless free fractions f (Lamb-Moessbauer factors) leads to the effective fraction of both Sn{sup 0} and Sn{sup II} species in such composites. The influence of chemical composition and especially of the surface-to-bulk tin species ratio on the electrochemical behaviour has been analysed for several Sn{sub x}[BPO{sub 4}]{sub 1-x} composite materials (0.17<x<0.91). The cell using the compound Sn{sub 0.72}[BPO{sub 4}]{sub 0.28} as active material exhibits interesting electrochemical performances (reversible capacity of 500 mAh g{sup -1} at C/5 rate). - Abstract: Galvanostatic discharge-charge curves of ATCO and Sn{sub 0.72}[BPO{sub 4}]{sub 0.28} composite materials at C/5 rate, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure alterations in microporous (Mg,Fe){sub 2}Al{sub 4}Si{sub 5}O{sub 18} crystals induced by energetic heavy-ion irradiation

The microporous framework structure of (Mg{sub 1-x}Fe{sub x}){sub 2}Al{sub 4}Si{sub 5}O{sub 18} (=cordierite) has been subject to a comparative study on the effect of structural alterations originating from exposure to high-energy heavy ions. Oriented samples (with x=0.061, 0.122, and 0.170) were irradiated with swift {sup 124}Xe, {sup 197}Au and {sup 96}Ru ions with 11.1 MeV per nucleon energy and fluences of 1x10{sup 12} and 1x10{sup 13} ions/cm{sup 2}. Irradiated and non-irradiated samples were investigated by means of X-ray diffraction, Moessbauer spectroscopy and optical absorption spectroscopy. Structural investigations reveal an essentially unchanged Al,Si ordering, which appears to be unaffected by irradiation. The most remarkable macroscopic change is the ion-beam induced colouration, which could be assigned to electronic charge transfer transitions involving the Fe cations. Moessbauer spectra indicate an increased amount of {sup [4]}Fe{sup 3+} for the irradiated sample. The most noticeable structural alteration concerns irradiation-induced dehydration of extra-framework H{sub 2}O, which is accompanied by a reduction in the molar volume by {approx}0.2 vol%. - Graphical abstract: Cordierite single-crystal specimen showing the color change from pale blue (unirradiated) to a yellowish brown layer (irradiated) after exposure to relativistic {sup 124}Xe ions at a fluence of 1x10{sup 12} ions per cm{sup 2}.

36 MATERIALS SCIENCE↗

Understanding the defect structure of solution grown zinc oxide

Zinc oxide (ZnO) is a wide bandgap semiconducting oxide with many potential applications in various optoelectronic devices such as light emitting diodes (LEDs) and field effect transistors (FETs). Much effort has been made to understand the ZnO structure and its defects. However, one major issue in determining whether it is Zn or O deficiency that provides ZnO its unique properties remains. X-ray absorption spectroscopy (XAS) is an ideal, atom specific characterization technique that is able to probe defect structure in many materials, including ZnO. In this paper, comparative studies of bulk and aqueous solution grown ({<=}90 Degree-Sign C) ZnO powders using XAS and x-ray pair distribution function (XPDF) techniques are described. The XAS Zn-Zn correlation and XPDF results undoubtedly point out that the solution grown ZnO contains Zn deficiency, rather than the O deficiency that were commonly reported. This understanding of ZnO short range order and structure will be invaluable for further development of solid state lighting and other optoelectronic device applications. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer ZnO powders have been synthesized through an aqueous solution method. Black-Right-Pointing-Pointer Defect structure studied using XAS and XPDF. Black-Right-Pointing-Pointer Zn-Zn correlations are less in the ZnO powders synthesized in solution than bulk. Black-Right-Pointing-Pointer Zn vacancies are present in the powders synthesized. Black-Right-Pointing-Pointer EXAFS and XPDF, when used complementary, are useful characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled drug release on amine functionalized spherical MCM-41

MCM-41 silica with spherical morphology and small particle sizes (100 nm) was synthesized and modified by post-synthesis method with different amounts of 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, was carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N{sub 2} physisorption, elemental analysis, thermal analysis and FT-IR spectroscopy. A new method was developed for the quantitative determination of amino groups in surface modified mesoporous materials by the ninhydrin reaction. Good correlation was found between the amino content of the MCM-41 materials determined by the ninhydrin method and their ibuprofen adsorption capacity. Amino modification resulted in high degree of ibuprofen loading and slow release rate in comparison to the parent non-modified MCM-41. - Graphical abstract: Determination of surface amino groups by ninhidrin method. Highlights: Black-Right-Pointing-Pointer Spherical MCM-41 modified by different amounts of APTES was studied. Black-Right-Pointing-Pointer Ibuprofen (IBU) adsorption and release characteristics was tested. Black-Right-Pointing-Pointer The ninhydrin reaction was used for the quantitative determination of amino groups. Black-Right-Pointing-Pointer Stoichiometric amount of APTES is enough for totally covering the surface with amino groups. Black-Right-Pointing-Pointer Good correlation was found between the amino content and IBU adsorption capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of biphenyl spacer appended to the flexible phosphonate arms in modulating the dimensionality of the coordination polymers: Synthesis, structural chemistry and magnetic properties

Two new compounds [Co (2,2 Prime -bipy) (H{sub 2}dbp)]{sub n} (1) and [Ni (2,2 Prime -bipy){sub 2}(H{sub 2}dbp)(H{sub 2}O)]{center_dot}H{sub 2}O (2) based on the flexible ligand 4,4 Prime -dimethylenebiphenyldiphosphonic acid (H{sub 4}dbp) with 2,2 Prime -bipyridine as secondary ligand have been synthesized under hydrothermal conditions. Both the compounds are well characterized by routine elemental analysis, IR, electronic spectroscopies, thermogravimetric analysis and finally by single crystal X-ray diffraction analysis. Compound 1 is a 1D extended coordination polymer and 2 is a discrete molecular compound. A comparative study between the geometries of H{sub 4}dbp ligand (in compounds 1 and 2, present study) and p-xylylenediphosphonic acid (H{sub 4}pxp) ligand (in previously reported compounds [Cu(2,2 Prime -bipy)(H{sub 2}pxp)]{center_dot}nH{sub 2}O (1A) and Ni(2,2 Prime -bipy){sub 2}H{sub 4}pxp]{sub n}[H{sub 2}pxp]{sub n} (2A), see text) demonstrate the effect of the twisting in the benzene rings in changing higher dimensional H{sub x}pxp (x refers to number of protonated hydroxyl groups) compounds to lower dimensional H{sub x}dbp compounds. The eight membered Co-dimer rings formed in compound 1 represents the simple and isolated Co-dimer, exhibiting weak antiferromagnetic exchange between metal centers through OPO bridges. - Graphical abstract: Two new compounds based on the dimethylenebiphenyldiphosphonic acid have been synthesized. The effect of twisting of benzene rings in the biphenyl spacer containing multidentate ligands alters dimensionality of final compounds. Highlights: Black-Right-Pointing-Pointer Cobalt containing coordination polymer and a nickel discrete compound have been synthesized. Black-Right-Pointing-Pointer Flexible ligand 4,4'-dimethylenebiphenyldiphosphonic acid has been employed. Black-Right-Pointing-Pointer Co(II) and Ni(II) ions are square pyramidal and octahedral respectively. Black-Right-Pointing-Pointer The effect of the twisting in the benzene rings in the associated ligand has been demonstrated.

36 MATERIALS SCIENCE↗

Structural distortion and band gap opening of hard MnB{sub 4} in comparison with CrB{sub 4} and FeB{sub 4}

MnB{sub 4} was newly synthesized to crystallize in a monoclinic P2{sub 1}/c structure, different from previous experimental and theoretical reports. Here, based on first-principles calculations, we perform a comparative study of geometric and energetic features, mechanical behaviors, electronic property and chemical bonding of the experimentally identified monoclinic MnB{sub 4}, as well as orthorhombic CrB{sub 4} and FeB{sub 4}. The results demonstrate that the presence of distorted rhomboidal-B{sub 4} units and one-dimensional Mn chains in the monoclinic MnB{sub 4} breaks the structural symmetry and lowers the total energy in comparison to the orthorhombic phase. The opening of band gap in MnB{sub 4} is induced by Peierls-paired Mn atoms, differing from the metallic behaviors of recently studied tetraborides. Specifically, the preservations of covalent bonding in distorted boron-rhomboids in MnB{sub 4} explain the relatively higher incompressibility and hardness. - Graphical abstract: P2{sub 1}/c-type structure for MnB{sub 4} characterizes rhomboid-B{sub 4} units and alternately short and long Mn–Mn chains. - Highlights: • The novel P2{sub 1}/c-type MnB{sub 4} compound is studied by first-principles calculations. • P2{sub 1}/c-type MnB{sub 4} has lower total energy and relatively higher stability. • An energy gap opening is found for P2{sub 1}/c-type MnB{sub 4} induced by Mn atom pairs. • P2{sub 1}/c-type MnB{sub 4} exhibits excellent mechanical properties. • The mechanical properties of TcB{sub 4} and ReB{sub 4} in P2{sub 1}/c structure are also studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carboxylate ligands induced structural diversity of zinc(II) coordination polymers based on 3,6-bis(imidazol-1-yl)carbazole: Syntheses, structures and photocatalytic properties

Solvothermal reactions of Zn(NO{sub 3}){sub 2}·6H{sub 2}O with 3,6-bis(1-imidazolyl)carbazole (3,6-bmcz) and 1,4-benzenedicarboxylic acid (1,4-H{sub 2}bdc), p-phenylenediacetic acid (p-H{sub 2}pda), benzophenone-4,4-dicarboxylic acid (H{sub 2}bpda) afforded three coordination polymers [Zn(1,4-bdc)(3,6-bmcz)]{sub n} (1), {[Zn(p-pda)(3,6-bmcz)]·1.5H_2O}{sub n} (2) and {[Zn(bpda)(3,6-bmcz)]·0.25H_2O}{sub n} (3). Complexes 1–3 were characterized by elemental analysis, IR, powder X-ray diffraction, and single-crystal X-ray diffraction. Complex 1 shows 3D structure with 2D nets inclined polycatenation. Complexes 2 and 3 possess an extended 3D supramolecular architecture based on their respective 2D layers through hydrogen-bonding interactions and the π···π stacking interactions. The solid state luminescent and optical properties of 1–3 at ambient temperature were also investigated. A comparative study on their photocatalytic activity toward the degradation of methylene blue in polluted water was explored. - Graphical abstract: Reactions of Zn(NO{sub 3}){sub 2} and 3,6-(1-imidazolyl)carbazole with 1,4-benzenedicarboxylic acid, p-phenylenediacetic acid or benzophenone-4,4-dicarboxylic acid afforded three coordination polymers with different topologies and photocatalytic activity. - Highlights: • Reactions of 1,4-H{sub 2}bdc, p-H{sub 2}pda or H{sub 2}bpda with 3,6-bmcz and Zn(II) gave three CPs. • Complex 1 is a 3D entanglement. • Complex 2 or 3 is a 3D supramolecular structure based on different 2D layers. • Complex 2 exhibited good catalytic activity of methylene blue photodegradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of Bismuth(III) coordination polymer and its transformation to nano α-Bi{sub 2}O{sub 3} for photocatalytic degradation

A new Bi(III) coordination polymer Bi{sub 2}(Hpdc){sub 2}(pdc){sub 2}·2H{sub 2}O (H{sub 2}pdc=pyridine-2,6-dicarboxylic acid) was synthesized by hydrothermal method. Solid state thermal decomposition of this complex under 500 °C for 1 h led to the foliated Bi{sub 2}O{sub 3} nanoparticles, which were then characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Comparative study on their photocatalytic activity toward the degradation of rhodamine B (RhB), methylene blue (MB) and methyl orange (MO) in polluted water was explored, and the mechanism of these photocatalytic degradation was discussed. These results provided some interesting insights into their photocatalytic applications. - Graphical abstract: We regard Bi{sub 2}(Hpdc){sub 2}(pdc){sub 2}·2H{sub 2}O with 1D chain structures as the precursor, then calcinate the complex to prepare nano-powder α-Bi{sub 2}O{sub 3}. The photochemical experiment indicates that Bi{sub 2}(Hpdc){sub 2}(pdc){sub 2}·2H{sub 2}O can be used as an efficient photocatalyst for the degradation of RhB and MB. Interestingly, nano α-Bi{sub 2}O{sub 3} shows higher activity than the commercial Bi{sub 2}O{sub 3} for the degradation of RhB, MB or MO. Display Omitted - Highlights: • A novel dinuclear Bi(III) coordination polymer is hydrothermally synthesized. • Calcinating the precursor Bi-CP will result in the nano Bi{sub 2}O{sub 3} with foliated morphology. • Nano Bi{sub 2}O{sub 3} shows higher activity than the commercial Bi{sub 2}O{sub 3} for the degradation of dyes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial microstructure and properties of copper clad steel produced using friction stir welding versus gas metal arc welding

A preliminary study compares the feasibility and microstructures of pure copper claddings produced on a pressure vessel A516 Gr. 70 steel plate, using friction stir welding versus gas metal arc welding. A combination of optical and scanning electron microscopy is used to characterize the grain structures in both the copper cladding and heat affected zone in the steel near the fusion line. The friction stir welding technique produces copper cladding with a grain size of around 25 μm, and no evidence of liquid copper penetration into the steel. The gas metal arc welding of copper cladding exhibits grain sizes over 1 mm, and with surface microcracks as well as penetration of liquid copper up to 50 μm into the steel substrate. Transmission electron microscopy reveals that metallurgical bonding is produced in both processes. Increased diffusion of Mn and Si into the copper cladding occurs when using gas metal arc welding, although some nano-pores were detected in the FSW joint interface. - Highlights: • Cladding of steel with pure copper is possible using either FSW or GMAW. • The FSW yielded a finer grain structure in the copper, with no evidence of cracking. • The FSW joint contains some evidence of nano-pores at the interface of the steel/copper. • Copper cladding by GMAW contained surface cracks attributed to high thermal stresses. • The steel adjacent to the fusion line maintained a hardness value below 248 HV.

36 MATERIALS SCIENCE↗

Strain-induced ordered structure of titanium carbide during depositing diamond on Ti alloy substrate

During the deposition of diamond films on Ti alloy substrates, titanium carbide is a common precipitated phase, preferentially formed at the interfacial region. However, in this case, the precipitation of an ordered structure of titanium carbide has not been reported. In our work, a long periodic ordered structure of TiC has been observed at the deposited diamond film/Ti alloy interface by high resolution transmission electron microscopy (HRTEM). The long periodic ordered structure is identified as 6H-type. The formation mechanism is revealed by comparative studies on the different structures of TiC precipitated under different diamond deposition conditions in terms of deposition time, atmosphere and temperature. A large number of carbon vacancies in the interfacial precipitated TiC phase are verified through electron energy loss spectroscopy (EELS) quantification analysis. However, an ordered arrangement of these carbon vacancies occurs only when the interfacial stress is large enough to induce the precipitation of 6H-type TiC. The supplementary analysis by X-ray diffraction (XRD) further confirms that additional diffraction peaks presented in the XRD patterns are corresponding to the precipitation of 6H-type TiC. - Highlights: •Different structures of TiC are observed during deposited diamond on Ti alloy. •One is common NaCl structure, the other is periodic structure. •The periodic structure is identified as 6H-type by HRTEM. •Carbon vacancies are verified to always exist in the TiC phase. •The precipitation of 6H-type TiC is mainly affected by interfacial stress.

36 MATERIALS SCIENCE↗

Investigation of antiperovskite Mn{sub 3}CuN{sub x} film prepared by DC reactive magnetron sputtering

Antiperovskite Mn{sub 3}CuN{sub x} film was prepared by dc reactive magnetron sputtering. It is the first time to report an antiperovskite ternary nitride film. The composition and crystal structure were characterized by energy dispersive spectroscope (EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). From the XRD pattern, it displays a (1 0 0) preferential orientation. A comparative study on the properties of Mn{sub 3}CuN{sub x} film and the bulk sample was presented. The film exhibits an antiferromagnetic to paramagnetic transition around 135 K, similar with the bulk sample. With temperature, the resistivity of the film shows semiconductor-like behavior throughout the measured temperature region, whereas there is an abrupt drop around the magnetic transition for the bulk. The variable temperature XRD results indicate that the film did not display any structure transition and shows a normal linear thermal expansion property around the magnetic transition.

36 MATERIALS SCIENCE↗

Surface modification of superparamagnetic iron nanoparticles with calcium salt of poly({gamma}-glutamic acid) as coating material

Surface-modified magnetite nanoparticles (MNPs) were synthesized by co-precipitation of aqueous solution of ferrous and ferric salts (molar ratio 1:2) upon adding a base followed by calcium salt of poly({gamma}-glutamic acid) (Ca-{gamma}-PGA) for uniform coating on the surface of MNPs. Both uncoated and Ca-{gamma}-PGA-coated MNPs were characterized using various techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and vibrating sample magnetometric (VSM) studies. Compared with bare MNPs, the IR spectra of coated MNPs showed characteristic peaks of {gamma}-PGA, implying the {gamma}-PGA coating on MNPs did occur. The TEM images depicted an average size of 8-10 nm for bare MNPs and 14 nm for coated MNPs, with their shape being spherical in nature. In the presence of applied magnetic field, a superparamagnetic behavior was observed at room temperature for both bare and Ca-{gamma}-PGA-coated MNPs, with no magnetism left upon magnetic-field removal.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and optical properties of Eu{sup 3+} doped NaREF{sub 4} (RE = Y, Gd), LnF{sub 3} (Ln = Y, La), and YF{sub 3}.1.5NH{sub 3} micro/nanocrystals

Highlights: {yields} The samples were synthesized by a hydrothermal method. {yields} Eu{sup 3+} displays different optical properties in the samples. {yields} The optical properties are compared studied and analyzed. {yields} J-O parameters are calculated based on Eu{sup 3+} emission spectra in some samples. {yields} J-O theory analysis is consistent well with the experimental results. -- Abstract: 5 mol% Eu{sup 3+} doped NaYF{sub 4} ({alpha}-, {beta}-), YF{sub 3}, YF{sub 3}.1.5NH{sub 3}, NaGdF{sub 4}, and LaF{sub 3} micro/nanocrystals have been synthesized by a hydrothermal method. The final products are characterized by X-ray diffraction, field emission scanning electron microscopy, photoluminescence excitation and emission spectra, and luminescent dynamic decay curves. Due to its sensitivity to local symmetry, Eu{sup 3+} shows different optical properties in the above samples. It has stronger luminescent intensity in {beta}-NaYF{sub 4} than that in {alpha}-NaYF{sub 4} while it exhibits different higher energy {sup 5}D{sub 1,2} to lower {sup 7}F{sub J} emissions as well as the asymmetric ratios and the splits of {sup 5}D{sub 0} {yields} {sup 7}F{sub 1}, {sup 7}F{sub 4}. YF{sub 3}, LaF{sub 3}, and {beta}-NaGdF{sub 4} have analogous optical intensities to those of {beta}-NaYF{sub 4}. However, {beta}-NaGdF{sub 4} has the similar spectral profile to that of {beta}-NaYF{sub 4} while YF{sub 3} and LaF{sub 3} have the opposite cases in the {sup 5}D{sub 0} {yields} {sup 7}F{sub 2}, {sup 7}F{sub 1} emissions. Further, Judd-Ofelt calculation has been used to analyze the experimental phenomena.

36 MATERIALS SCIENCE↗

Photocatalytic degradation of gaseous toluene over hollow “spindle-like” α-Fe{sub 2}O{sub 3} loaded with Ag

Highlights: ► Hollow α-Fe{sub 2}O{sub 3} spindle-shaped microparticles were prepared for Ag support. ► The hollow α-Fe{sub 2}O{sub 3} and Ag/α-Fe{sub 2}O{sub 3} materials were used to degrade gaseous toluene. ► Complete degradation of toluene occurred on the Ag/α-Fe{sub 2}O{sub 3} surface. -- Abstract: In this work, hollow “spindle-like” α-Fe{sub 2}O{sub 3} nanoparticles were synthesized by a hydrothermal route. The Ag/α-Fe{sub 2}O{sub 3} catalyst was prepared based on the spindle-shaped α-Fe{sub 2}O{sub 3} with CTAB as the surfactant, which showed excellent photoelectric property and photocatalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction, scanning electronic microscopy, transmission electronic microscopy, energy-dispersive X-ray spectra, and UV–Vis diffuse reflectance spectroscopy techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage measurement. The photocatalytic performances of the Ag/α-Fe{sub 2}O{sub 3} and α-Fe{sub 2}O{sub 3} samples were comparatively studied in the degradation of toluene under xenon lamp irradiation by in situ FTIR spectroscopy. Benzaldehyde and benzoic acid species could be observed on the α-Fe{sub 2}O{sub 3} surface rather than Ag/α-Fe{sub 2}O{sub 3} surface. The results indicate that the Ag/α-Fe{sub 2}O{sub 3} sample exhibited higher photocatalytic efficiency.

36 MATERIALS SCIENCE↗

Pumping-route-dependent concentration quenching and temperature effect of green up- and down-conversion luminescence in Er{sup 3+}/Yb{sup 3+} co-doped Gd{sub 2}(WO{sub 4}){sub 3} phosphors

Graphical abstract: A comparative study on the concentration quenching behaviors of green down- and up-conversion emissions was carried out for the first time, and the different concentration quenching mechanisms were analyzed. Secondly, the thermal effect induced by 980 nm LD irradiation was investigated, it was observed that the equilibrium temperature of Gd{sub 2}(WO{sub 4}){sub 3}:Er{sup 3+}/Yb{sup 3+} sample was decided by both the excitation power and Er{sup 3+} doping concentration. Highlights: ► Gd{sub 2}(WO{sub 4}){sub 3}:Er/Yb phosphors were prepared via a co-precipitation reaction. ► Morphology and structure of the phosphors were characterized by XRD and SEM. ► Concentration quenching mechanisms for down and up emissions were studied. ► Thermal effect induced by laser irradiation was studied via temperature sensing tech. - Abstract: Gd{sub 2}(WO{sub 4}){sub 3} phosphors with various Er{sup 3+} concentrations and fixed Yb{sup 3+} concentration were synthesized via a co-precipitation method, and their crystal structure and morphology were characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The concentration quenching behaviors of green up- and down-conversion emissions of Er{sup 3+} were analyzed, and it was confirmed that the difference between quenching concentration for up- and down-conversion emissions resulted from the different population routes. The temperature sensing properties of the Gd{sub 2}(WO{sub 4}){sub 3}:Er{sup 3+}/Yb{sup 3+} phosphors were studied, and it was found that the Er{sup 3+} doping concentration slightly affected the sensitivity, and Gd{sub 2}(WO{sub 4}){sub 3}:Er{sup 3+}/Yb{sup 3+} phosphors could be used in a broad temperature region for detecting temperature. Finally, the thermal effect induced by 980 nm LD irradiation was investigated, it was observed that the equilibrium temperature of Gd{sub 2}(WO{sub 4}){sub 3}:Er{sup 3+}/Yb{sup 3+} sample was decided by both the excitation power and Er{sup 3+} doping concentration.

36 MATERIALS SCIENCE↗

Photocatalytic performances and activities of Ag-doped CuFe{sub 2}O{sub 4} nanoparticles

Graphical abstract: - Highlights: • CuFe{sub 2}O{sub 4} nanocrystals were synthesized by a co-precipitation method. • Ag/CuFe{sub 2}O{sub 4} catalyst was prepared by the wetness impregnation strategy. • The structural properties of Ag/CuFe{sub 2}O{sub 4} were investigated by XRD, TEM, DRS, and XPS techniques. • Ag/CuFe{sub 2}O{sub 4} has higher photocatalytic activity. - Abstract: In this work, CuFe{sub 2}O{sub 4} nanoparticles were synthesized by a chemical co-precipitation route. The Ag/CuFe{sub 2}O{sub 4} catalyst was prepared based on the CuFe{sub 2}O{sub 4} nanoparticles by the incipient wetness impregnation strategy, which showed excellent photoelectric property and catalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction (XRD), transmission electronic microscopy (TEM), UV–vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage (SPV) measurement. The photocatalytic degradation of 4-CP by the Ag/CuFe{sub 2}O{sub 4} and CuFe{sub 2}O{sub 4} samples were comparatively studied under xenon lamp irradiation. The results indicate that the Ag/CuFe{sub 2}O{sub 4} sample exhibited the higher efficiency for the degradation of 4-CP.

36 MATERIALS SCIENCE↗

Synthesis, structure and properties of Na[AsW{sub 2}O{sub 9}]

Single crystal and polycrystalline powder samples of sodium arseno-tungstate of composition Na[AsW{sub 2}O{sub 9}] were synthesized using high-temperature solid-state methods. The greenish single crystals of the phase were characterized by X-ray diffraction data structure determination and the bulk compound confirmed by powder X-ray data Rietveld refinements. Additionally, scanning electron microscopy (SEM) attached with energy dispersive X-Ray spectroscopy (EDX), thermogravimetry (TG), differential scanning calorimetry (DSC), fourier transform infrared (FTIR) and Raman spectroscopy was performed. A comparative study between Na[AsW{sub 2}O{sub 9}] and isotypic K[AsW{sub 2}O{sub 9}] demonstrates the structural modifications and the consequent properties. Placing sodium in the channel of the arseno-tungstate framework, the average As-O and W-O bond distances did not change due to their rigid-unit like behaviors. However, the unit cell volume contracted about 7.4% caused by shrinkage of the channel dimensions due to shorter Na-O bond distances. The non-linear optical property of the compound has been explained in terms of asymmetric W-O and As-O chemical bonding led by WO{sub 6} and AsO{sub 4} polyhedral distortion, respectively.

36 MATERIALS SCIENCE↗

Hierarchically MoS2 nanospheres assembled from nanosheets for superior CO gas-sensing properties

Highlights: • Preparation of 3D Hierarchical large surface area MoS{sub 2} nanospheres from nansheets. • The efficient enhanced gas-sensing response of 92.6 at 500 ppm for CO at 230 °C. • Higher selectivity towards CO than other gases at different temperature ranges. - Abstract: Hierarchical three dimensional MoS{sub 2}nanostructures composed of small sheet-like nanostructures are successfully prepared using a simple two-step hydrothermal process with sodium dodecyl sulfate (SDS), as a surface modifier. The as-preparedMoS{sub 2}nanospheres are characterized by XRD, BET, XPS, EDS, SEM and HRTEM. The gas–sensing properties of as–prepared MoS{sub 2}nanostructures are tested at 175–230 °C temperatures for 50–500 ppm concentration range, using an efficient ceramic-tube sensor system via an intelligent gas testing system. A high response and selectivity towards carbon monoxide than other gases is observed. Comparative studies of MoS{sub 2}nanostructures for different concentration of carbon monoxide gas and definite sensor-stability for different gases are studied, as well. The sensor fabrication and sensing mechanism is discussed as well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗