Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Capacitors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Influence of interlayer trapping and detrapping mechanisms on the electrical characterization of hafnium oxide/silicon nitride stacks on silicon

Al/HfO{sub 2}/SiN{sub x}:H/n-Si metal-insulator-semiconductor capacitors have been studied by electrical characterization. Films of silicon nitride were directly grown on n-type silicon substrates by electron cyclotron resonance assisted chemical vapor deposition. Silicon nitride thickness was varied from 3 to 6.6 nm. Afterwards, 12 nm thick hafnium oxide films were deposited by the high-pressure sputtering approach. Interface quality was determined by using current-voltage, capacitance-voltage, deep-level transient spectroscopy (DLTS), conductance transients, and flatband voltage transient techniques. Leakage currents followed the Poole-Frenkel emission model in all cases. According to the simultaneous measurement of the high and low frequency capacitance voltage curves, the interface trap density obtained for all the samples is in the 10{sup 11} cm{sup -2} eV{sup -1} range. However, a significant increase in this density of about two orders of magnitude was obtained by DLTS for the thinnest silicon nitride interfacial layers. In this work we probe that this increase is an artifact that must be attributed to traps existing at the HfO{sub 2}/SiN{sub x}:H intralayer interface. These traps are more easily charged or discharged as this interface comes near to the substrate, that is, as thinner the SiN{sub x}:H interface layer is. The trapping/detrapping mechanism increases the capacitance transient and, in consequence, the DLTS measurements have contributions not only from the insulator/substrate interface but also from the HfO{sub 2}/SiN{sub x}:H intralayer interface.

36 MATERIALS SCIENCE↗

Electrical Conductivity in Polymer Blends/ Multiwall Carbon Nanotubes

Carbon nanotubes (CNT) based polymer composites have emerged as the future multifunctional materials in view of its exceptional mechanical, thermal and electrical properties. One of the major interests is to develop conductive polymer composites preferably at low concentration of CNT utilizing their high aspect ratio (L/D) for numerous applications, which include antistatic devices, capacitors and materials for EMI shielding. In this context, polymer blends have emerged as a potential candidate in lowering the percolation thresholds further by the utilization of 'double-percolation' which arises from the synergistic improvements in blend properties associated with the co-continuous morphology. Due to strong inter-tube van der Waals' forces, they often tend to aggregate and uniform dispersion remains a challenge. To overcome this challenge, we exploited sodium salt of 6-aminohexanoic acid (Na-AHA) which was able to assist in debundlling the multiwall carbon nanotubes (MWNT) through 'cation-{pi}' interactions during melt-mixing leading to percolative 'network-like' structure of MWNT within polyamide6 (PA6) phase in co-continuous PA6/acrylonitrile butadiene styrene (ABS) blends. The composite exhibited low electrical percolation thresholds of 0.25 wt% of MWNT, the lowest reported value in this system so far. Retention of 'network-like structure' in the solid state with significant refinement was observed even at lower MWNT concentration in presence Na-AHA, which was assessed through AC electrical conductivity measurements. Reactive coupling was found to be a dominant factor besides 'cation-{pi}' interactions in achieving low electrical percolation in PA6/ABS+MWNT composites.

36 MATERIALS SCIENCE↗

Characterization of Charging Control of a Single Wafer High Current Spot Beam Implanter

This paper focuses on the characterization of charging control of an Axcelis Optima HD single wafer high current spot beam implanter using MOS capacitors with attached antennas of different size and shape. Resist patterns are implemented on Infineon Technologies own charging control wafers to investigate the influence of photo resist on charging damage. Compared to batch high current implanters the design of the beamline and the beam shape are comparable to single wafer high current spot beam implanters, however due to the different scanning architecture the dose rate of the single wafer high current spot beam implanters is significantly higher compared to the batch tools. Therefore, the risk of charging damage will be higher. The charging damage was studied as a function of the energy, the beam current and the most important plasma flood gun parameters. The results have shown that for very high antenna ratios the charging damage for single wafer implanters, even spot or ribbon beam implanters, is higher than for high current batch implanters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Threshold Voltage Engineering by Lanthanide Doping of the MOS Gate Stack

With the replacement of traditional polysilicon and silicon dioxide by metal gates and high-k dielectrics, respectively, in the MIS gate stack for the 45 nm technology node, higher than expected device threshold voltages have been observed due to the effect of Fermi-level pinning. While the debate as to the exact cause of Fermi-level pinning is ongoing, several attempts (capping layers, new gate metal compositions) have been made to curb this effect. In this paper, the tuning of metal gate work function by ion implantation is investigated as a tool for controlling the threshold voltage. Lanthanide incorporation is used to achieve a flat-band voltage shift of more than-1 V for n-MOS capacitors. It is shown that by adjusting dose and energy, the flat-band voltage shift can be tuned to a desired value, without substantial damage to the insulating quality of the gate. This translates to an effective shift in the threshold voltage.

36 MATERIALS SCIENCE↗

High precision high voltage divider and its application to electron beam ion traps

A high precision high voltage divider has been developed for the electron beam ion trap in Shanghai. The uncertainty caused by the temperature coefficient of resistance (TCR) and the voltage coefficient of resistance has been studied in detail and was minimized to the level of ppm (10{sup -6}) range. Once the TCR was matched between the resistors, the precision of the dividing ratio finally reached the ppm range also. We measured the delay of the divider caused by the capacitor introduced to minimize voltage ripple to be 2.35 ms. Finally we applied the divider to an experiment to measure resonant energies for some dielectronic recombination processes for highly charged xenon ions. The final energies include corrections for both space charge and fringe field effects are mostly under 0.03%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of Bi{sub 2}O{sub 3} seed layer on crystalline orientation and ferroelectric properties of Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} thin films prepared by rf-magnetron sputtering method

Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} (BLT) thin films with Bi{sub 2}O{sub 3} seed layers were prepared on Pt(111)/Ti/SiO{sub 2}/Si substrate by rf-magnetron sputtering method. The effect of annealing procedure, thickness, and position of Bi{sub 2}O{sub 3} seed layer on the structural and electrical properties of BLT thin film was investigated. When using a two-step annealing procedure, the x-ray diffraction pattern indicated that BLT thin film with a Bi{sub 2}O{sub 3} seed layer showed c-axis preference orientation. Compared with Pt/BLT/Bi{sub 2}O{sub 3}/Pt structure film, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt structure film showed higher oriented to c direction. The ferroelectric property of BLT thin film improved remarkably with the incorporation of Bi{sub 2}O{sub 3} seed layer. Under the applied voltage of 14 V, the remnant polarization and coercive voltage of the Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3} capacitor with 18-nm-thick Bi{sub 2}O{sub 3} seed layer were 45.2 {mu}C/cm{sup 2} and 9.2 V, respectively. Moreover, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt film with 18-nm-thick Bi{sub 2}O{sub 3} seed layers exhibited good fatigue endurance even after 6x10{sup 9} switching cycles, which was attributed to the double-sided Bi{sub 2}O{sub 3} layer. They decreased the grain boundary density by enhancing the grain size of BLT film and enhanced the c-axis preferential orientation. Compared with BLT film deposited directly on Pt, double-sided Bi{sub 2}O{sub 3} layer would greatly enhance the leakage current resistance of the BLT film.

36 MATERIALS SCIENCE↗

Pinch Experiments in a Table Top Generator

The design and construction of a table top multipurpose capacitor bank of hundred of Joules and hundred of kiloAmperes conceived to be used in small scale Z-pinch experiments is reported. A recent result on a Z-pinch gas embedded discharge using hollow conical electrodes done in a similar table top generator is also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MAIZE: a 1 MA LTD-Driven Z-Pinch at The University of Michigan

Researchers at The University of Michigan have constructed and tested a 1-MA Linear Transformer Driver (LTD), the first of its type to reach the USA. The Michigan Accelerator for Inductive Z-pinch Experiments, (MAIZE), is based on the LTD developed at the Institute of High Current Electronics in collaboration with Sandia National Labs and UM. This LTD utilizes 80 capacitors and 40 spark gap switches, arranged in 40 'bricks,' to deliver a 1 MA, 100 kV pulse with 100 ns risetime into a matched resistive load. Preliminary resistive-load test results are presented for the LTD facility.Planned experimental research programs at UM include: a) Studies of Magneto-Raleigh-Taylor instability of planar foils, and b) Vacuum convolute studies including cathode and anode plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromagnetic Wave Propagation Through the ZR Z-Pinch Accelerator

A fully three-dimensional electromagnetic model of the major pulsed power components of the 26-MA ZR accelerator is presented. This large-scale simulation model tracks the evolution of electromagnetic waves through the intermediate storage capacitors, laser-triggered gas switches, pulse-forming lines, water switches, tri-plate transmission lines, and water convolute to the vacuum insulator stack. The plates at the insulator stack are coupled to a transmission line circuit model of the four-level magnetically-insulated transmission line section and post-hole convolutes. The vacuum section circuit model is terminated by either a short-circuit load or dynamic models of imploding z-pinch loads. The simulations results are compared with electrical measurements made throughout the ZR accelerator and good agreement is found, especially for times before and up to peak load power. This modeling effort represents new opportunities for modeling existing and future large-scale pulsed power systems used in a variety of high energy density physics and radiographic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Great enhancement of pyroelectric properties for Ba{sub 0.65}Sr{sub 0.35}TiO{sub 3} films on Pt-Si substrates by inserting a self-buffered layer

(100)-Ba{sub 0.65}Sr{sub 0.35}TiO{sub 3} (BST) films were deposited on Pt/Ti/SiO{sub 2}/Si substrates using a low-temperature self-buffered layer. X-ray diffraction and atomic force microscope investigations show that the microstructure of BST films strongly depends on surface morphology of annealed self-buffered layer. The mechanism of nucleus formation and the growth initiation of BST films on self-buffered layers were proposed. It was found that the pyroelectric properties of BST films can be greatly enhanced. The pyroelectric coefficient and material merit figure of (100)-BST films are 1.16x10{sup 4} {mu}C m{sup -2} K{sup -1} and 2.18x10{sup -4} Pa{sup -1/2}, respectively. The detectivity of 9.4x10{sup 7} cm Hz{sup 1/2} W{sup -1} was obtained in the (100)-BST film capacitors thermally isolated by 500 nm SiO{sub 2} films.

36 MATERIALS SCIENCE↗

Seeding magnetic fields for laser-driven flux compression in high-energy-density plasmas

A compact, self-contained magnetic-seed-field generator (5 to 16 T) is the enabling technology for a novel laser-driven flux-compression scheme in laser-driven targets. A magnetized target is directly irradiated by a kilojoule or megajoule laser to compress the preseeded magnetic field to thousands of teslas. A fast (300 ns), 80 kA current pulse delivered by a portable pulsed-power system is discharged into a low-mass coil that surrounds the laser target. A >15 T target field has been demonstrated using a <100 J capacitor bank, a laser-triggered switch, and a low-impedance (<1 {Omega}) strip line. The device has been integrated into a series of magnetic-flux-compression experiments on the 60 beam, 30 kJ OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. The initial application is a novel magneto-inertial fusion approach [O. V. Gotchev et al., J. Fusion Energy 27, 25 (2008)] to inertial confinement fusion (ICF), where the amplified magnetic field can inhibit thermal conduction losses from the hot spot of a compressed target. This can lead to the ignition of massive shells imploded with low velocity--a way of reaching higher gains than is possible with conventional ICF.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dielectric properties and tunability of cubic pyrochlore Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films

The Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films with cubic pyrochlore structure were prepared onto Pt-coated sapphire substrates by rf magnetron sputtering deposition from a stoichiometric target. Dielectric measurements indicated that the Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films exhibited low dielectric loss of {approx}0.0018-0.004, medium dielectric constant of {approx}86, and superior tunable dielectric properties at room temperature. A bias field of 1.6 MV/cm resulted in the maximum voltage tunability of 39%. A brief discussion is given on the enhanced tunability compared to Bi{sub 1.5}ZnNb{sub 1.5}O{sub 7} thin films. The low loss and superior tunability make Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films promising for potential tunable capacitor applications.

36 MATERIALS SCIENCE↗

Degradation mechanisms of electron mobility in metal-oxide-semiconductor field-effect transistors with LaAlO{sub 3} gate dielectric

LaAlO{sub 3} is a promising candidate of gate dielectric for future very large scale integration devices. In this work, metal-oxide-semiconductor capacitors and transistors with LaAlO{sub 3} gate dielectric were fabricated and the electron mobility degradation mechanisms were studied. The LaAlO{sub 3} films were deposited by radio frequency magnetron sputtering. The LaAlO{sub 3} films were examined by x-ray diffraction, secondary ion mass spectroscopy, and x-ray photoelectron spectroscopy. The temperature dependence of metal-oxide-semiconductor field-effect transistors characteristics was studied from 11 K to 400 K. The rate of threshold voltage change with temperature (DELTAV{sub T}/DELTAT) is -1.51 mV/K. The electron mobility limited by surface roughness is proportional to E{sub eff}{sup -0.66} in the electric field of 0.93 MV/cm<E{sub eff}<2.64 MV/cm at 300 K and the phonon scattering is proportional to T{sup -5.6} between 300 and 400 K. Soft optical phonon scattering was used to explain the extra source of phonon scattering in LaAlO{sub 3}-gated n-channel metal-oxide-semiconductor field-effect transistors.

36 MATERIALS SCIENCE↗

Charging and discharging in ion implanted dielectric films used for capacitive radio frequency microelectromechanical systems switch

In this work, metal-insulator-semiconductor (MIS) capacitor structure was used to investigate the dielectric charging and discharging in the capacitive radio frequency microelectromechanical switches. The insulator in MIS structure is silicon nitride films (SiN), which were deposited by either low pressure chemical vapor deposition (LPCVD) or plasma enhanced chemical vapor deposition (PECVD) processes. Phosphorus or boron ions were implanted into dielectric layer in order to introduce impurity energy levels into the band gap of SiN. The relaxation processes of the injected charges in SiN were changed due to the ion implantation, which led to the change in relaxation time of the trapped charges. In our experiments, the space charges were introduced by stressing the sample electrically with dc biasing. The effects of implantation process on charge accumulation and dissipation in the dielectric are studied by capacitance-voltage (C-V) measurement qualitatively and quantitatively. The experimental results show that the charging and discharging behavior of the ion implanted silicon nitride films deposited by LPCVD is quite different from the one deposited by PECVD. The charge accumulation in the dielectric film can be reduced by ion implantation with proper dielectric deposition method.

36 MATERIALS SCIENCE↗

End-compensated magnetostatic cavity for polarized {sup 3}He neutron spin filters

We have expanded upon the ''Magic Box'' concept, a coil driven magnetic parallel plate capacitor constructed out of mu-metal, by introducing compensation sections at the ends of the box that are tuned to limit end-effects similar to those of short solenoids. This ability has reduced the length of the magic box design without sacrificing any loss in field homogeneity, making the device far more applicable to the often space limited neutron beam line. The appeal of the design beyond affording longer polarized {sup 3}He lifetimes is that it provides a vertical guide field, which facilitates neutron spin transport for typical polarized beam experiments. We have constructed two end-compensated magic boxes of dimensions 28.4x40x15 cm{sup 3} (lengthxwidthxheight) with measured, normalized volume-averaged transverse field gradients ranging from 3.3x10{sup -4} to 6.3x10{sup -4} cm{sup -1} for cell sizes ranging from 8.1x6.0 to 12.0x7.9 cm{sup 2} (diameterxlength), respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tuning of electrical charging effects for ferromagnetic Mn-doped ZnO nanocrystals embedded into a SiO{sub 2} layer fabricated by KrF excimer laser irradiation

The ZnMnO nanocrystals were formed by the laser irradiation of the sputter-deposited ZnMnO ultrathin layer using a 248 nm KrF excimer laser, and the size and density of the nanocrystals were observed to be controllable by modulations of either the energy density or the frequency of the irradiated pulsed-laser beam. Metal-oxide-semiconductor capacitors fabricated using ZnMnO nanocrystals clearly showed the electrical charging effect, and it was observed that the memory window depends on the size and density of nanocrystals. For measurements of the spontaneous magnetization, ZnMnO nanocrystals showed to have room-temperature ferromagnetism with M{sub r} of approx1.5 emu/cm{sup 3} and H{sub c} 167 Oe. By using ferromagnetism in ZnMnO nanocrystals, tuning of the memory window was demonstrated. Namely, it was clearly observed that the flat-band voltage shift of approx1.25 V can be modulated to be approx0.8 V by applying the magnetic field. This is attributed to the modulation of probabilities for tunneling events due to the increased magnetoelectrical repulsion between spin-polarized carriers in ZnMnO dilute magnetic semiconductor nanocrystals and unpolarized carriers in p-Si under the magnetic field. These results suggest that ZnMnO nanocrystals can be used for spin-functional memory devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of anode shape on correlation of neutron emission with pinch energy for a 2.7 kJ Mather-type plasma focus device

Correlation of neutron emission with pinch energy for a Mather-type plasma focus energized by a single capacitor 12.5 muF, 21 kV (2.7 kJ) is investigated by employing time resolved and time integrated detectors for two different anode shapes. The maximum average neutron yield of about 1.3x10{sup 8} per shot is recorded with cylindrical anode, that increases to 1.6x10{sup 8} per shot for tapered anode. At optimum pressure the input energy converted to pinch energy is about 24% for cylindrical anode as compared to 36% for tapered anode. It is found that the tapered anode enhances neutron flux about 25+-5% both in axial and radial directions and also broadens the pressure range for neutron emission as well as pinch energy. The neutron yield and optimum gas filling pressures are found strongly dependent on the anode shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal strain-induced dielectric anisotropy in Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thin films grown on silicon-based substrates

Dielectric properties of Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) thin films, which were prepared on silicon-based substrates by ion beam sputtering and postdeposition annealing method, were systematically investigated in different electrode configurations of metal-insulator-metal and coplanar interdigital capacitors. It was found that a large dielectric anisotropy exists in the films with better in-plane dielectric properties (higher dielectric permittivity and tunability) than those along the out-of-plane direction. The observed anisotropic dielectric responses are explained qualitatively in terms of a thermal strain effect that is related to dissimilar film strains along the in-plane and out-of-plane directions. Another reason for the dielectric anisotropy is due to different influences of the interfacial low-dielectric layer between the BST film and the substrate (metal electrode).

36 MATERIALS SCIENCE↗