Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONCURRENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Moving Beyond the Standard of Care: Accelerate Testing of Radiation-Drug Combinations

Radiation therapy is a major treatment modality used in > 60% of cancer patients as definitive local treatment for inoperable locoregionally confined tumors and as palliative therapy. Although cytotoxic chemotherapy enhances the effectiveness of treatment, the benefit over radiation therapy alone is modest. There is a need to enhance the effectiveness of local tumor control over what sequentially or concurrently administered cytotoxic chemotherapy provides. Although many biological pathways are known to enhance the effectiveness of radiation therapy, there is currently a paucity of drugs approved for use in combination. Several clinical trials have tested the effectiveness of combining targeted agents or immunotherapies with radiation therapy, but the results of these trials have been negative, likely stemming from the relative lack of preclinical evidence using appropriate experimental standardization or model systems. Accelerating the identification of agents tested in an appropriate clinical context and experimental systems or models would greatly enhance the potential to bring forward early testing of drugs that would not only be safe but also more effective. This article provides an overview of the opportunities and challenges of developing therapeutics to combine with radiation therapy, and some guidance toward preclinical and early clinical testing to improve the chance that advanced phase testing of drug-radiation combinations would be successful in the long term.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Randomized Phase 3, Double-blind, Placebo-controlled Study of Prophylactic Gabapentin for the Reduction of Oral Mucositis Pain During the Treatment of Oropharyngeal Squamous Cell Carcinoma

The purpose of this paper is to determine whether prophylactic gabapentin usage in patients undergoing definitive concurrent chemotherapy and radiation therapy (chemoRT) for oropharyngeal cancer (OPC) improves treatment-related oral mucositis pain, opioid use, and feeding tube (FT) placement.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Development of an enzyme cocktail to bioconvert untapped starch in sweet sorghum processing by-products: Part II. Application and economic potential

Demand for bioethanol and other biochemicals produced from agricultural crops has increased. Sweet sorghum has been identified as a promising bioenergy crop as it can produce starch, sugar, and fibrous biomass. During processing, starch accumulates in the juice sediments and clarification mud. And, while currently not recovered, it can be made accessible for fermentation by enzymatic hydrolysis. The enzymatic hydrolysis of starch in sweet sorghum processing streams was investigated, followed by fermentation of the resulting glucose to ethanol. The juice sediment contained sufficient starch to increase fermentable sugars by 127%, allowing a final ethanol titer of 11.1 vol%. The economics for fermentation of only dissolved sugars (Scenario 1) versus dissolved sugars and hydrolyzed starch (Scenario 2) were compared using a technoeconomic model. Fixed capital cost was found to be similar for both scenarios. For a set harvest period, Scenario 2 could produce 20% more ethanol; however, if the distillation by-product was dried and marketed as animal feed, Scenario 1 was more cost effective. A plant producing 5.6–5.7 Mkg of fuel ethanol per year had a minimum selling price of $0.67/kg of ethanol with concurrent production of animal feed and zero cost sweet sorghum processing. Finally, even with these optimistic assumptions, the estimated production cost was higher than the current wholesale price of fuel ethanol.

09 BIOMASS FUELS↗

Assessing microbial systems and process configurations for improved ethanol production from sugary stovers by integrating soluble sugars and holocellulose

Here, this study evaluated microbial systems and technological approaches to configure the whole slurry co-fermentation process for ethanol biosynthesis from a novel stover system rich in sugars. Two approaches, namely separate and simultaneous hydrolysis and co-fermentation (SHCF and SSCF, respectively), were investigated using Escherichia coli monoculture and E. coli-yeast coculture. The SSCF with E. coli monoculture produced 32.75 g/L ethanol, representing only 44.87% yield, which left 65.13 g/L of total sugars unconverted and exhibited limited xylose consumption. Subsequently, a coculture-based SHCF significantly enhanced sugar consumption, leading to increase in ethanol yield and concentration to 66.94% and 48.86 g/L, respectively. Nevertheless, xylose utilization remained minimal due to the preference for glucose and the inhibitory effects of certain compounds. Thereafter, modification of the medium composition by supplementing betaine and sodium metabisulfite improved ethanol production to 53.18 g/L by reducing the toxic effects of inhibitors. Finally, a dual-phase SSCF (DP-SSCF) was explored by allowing the consumption of sugars from the pretreated slurry in the first phase, followed by concurrent cellulose hydrolysis and utilization of the resulting glucose in the second phase. This strategy increased ethanol titer to 63.14 g/L, with 84.3% yield and 0.88 g/L/h productivity.

09 BIOMASS FUELS↗

Adjusting solar-induced fluorescence to nadir-viewing provides a better proxy for GPP

Solar-induced fluorescence (SIF) provides key information for inferring terrestrial gross primary productivity (GPP). However, there is little research on analyzing the performance of nadir-adjusted SIF (SIF nadir ) on GPP, compared to total SIF emitted by all leaves (SIF total ) for reducing the viewing angle effects and estimating GPP. Besides, there have been controversial opinions on whether SIF total is better correlated to GPP than raw SIF observations (SIF obs ). Here we systematically analyzed the relationship between raw/nadir/total SIF (i.e., SIF obs , SIF nadir and SIF total ) and GPP and investigated the underlying mechanism, using multi-angular field measurements and eddy covariance data in wheat and corn crops at sub-daily scale. We further compared the performance of SIF obs , SIF nadir and SIF total in estimating GPP using the TROPOspheric Monitoring Instrument (TROPOMI) SIF and concurrent AmeriFlux measurements at daily scale. Furthermore, the results indicate that diurnal SIF nadir has stronger correlations to GPP than SIF obs for field measurements, with the increase of mean coefficient of determination (R 2 ) by 0.05–0.07 for far-red band and 0.11–0.20 for red band. SIF nadir shows comparable performance with SIF total for both far-red and red bands. Although the viewing angle effects dominate the difference in estimating GPP between SIF nadir and SIF obs , the correlation between light use efficiency (LUE) and fesc further determines the different performance of SIF nadir and SIF total in estimating GPP. TROPOMI-based analysis further confirms that SIF nadir overall has higher correlations to AmeriFlux GPP than SIF obs for different plant functional types and shows similar performance with SIF total . Compared to SIF total , the estimation of SIF nadir independent of viewing angle effects does not require any canopy structure parameters, and thus offers promising potential for reliably estimating regional and global GPP.

54 ENVIRONMENTAL SCIENCES↗

Hidden first-order phase transitions and large magnetocaloric effects in GdNi 1-x Co x

We report a large magnetocaloric effect tunable between 70 and 115 K in a series of rare earth intermetallic compounds GdNi 1-x Co x with x varying from 0 to 0.15 that manifest rather unconventional second-order phase transitions with concurrent changes in both magnetic and crystallographic sublattices. While the Curie temperature, TC, linearly increases with x(Co), the maximum isothermal entropy change induced by magnetic field varying between 0 and 50 kOe slightly decreases from 14 J/kg K at 71 K when x(Co) = 0 to10 J/kg K at 115 K when x(Co) = 0.15. Additionally, the temperature-averaged entropy change figures of merit calculated at temperature spans of 10 K for all examined compositions are comparable to those of the best known magnetocaloric materials that exhibit second-order phase transitions, including elemental Gd and La(Fe,Co,Si) 13 alloys. Through a detailed analysis of the magnetic field-induced entropy changes along with assessment of critical exponents we explore the role magneto-elastic coupling plays in controlling magnetocaloric properties of GdNi 1-x Co x compounds. We also formulate a model based on the mean field theory approximation to describe both magnetic and magnetocaloric properties of the title materials in qualitative agreement with experimental results.

36 MATERIALS SCIENCE↗

Tetragonal structure and uniaxial magnetic anisotropy in the arc-melted (Ce,Zr) 2 (Fe,M) 17 (M = Mo, W, Co) alloys

The tetragonal ThMn 12 -type structure is stabilized in (Ce 1-x Zr x ) 2 T 16 M (x = 0.2 – 0.3; T = Fe or Fe/Co, M = Mo or W) arc-melted alloys. Approximately 5 at% of Mo or W admixture is sufficient to transform the hexagonal Th 2 Ni 17 -type structure of (Ce 1-x Zr x ) 2 Fe 17 into the tetragonal ThMn 12 -type structure of nearly single-phase (Ce 1-x Zr x ) 2 Fe 16 M and/or (Ce 1-x Zr x ) 2 Fe 15 CoM bulk alloys. X-ray Rietveld refinements reveal that Zr and Mo (W) substitute different sites in the tetragonal crystal structure. Zirconium preferentially replaces Ce, whereas Mo (W) substitutes Fe. At room temperature, the tetragonal phases exhibit strong ferromagnetism and a uniaxial magneto-crystalline anisotropy with anisotropy fields of 15 – 17 kOe. These materials possess room-temperature saturation magnetizations of 95 – 105 emu/g and Curie temperature of 420 – 505 K. At some concentrations, concurrent Zr and Mo (W) site occupancy facilitates 1:12 structure formation in bulk alloys with minimal presence of non-magnetic element in the Fe sublattice, thus securing the highest known magnetic moment per Fe atom (∼ 1.37 µ B ) in this type of materials. The intrinsic magnetic characteristics, as well as the absence of critical rare earths (RE), make these compounds interesting for development as low-cost permanent magnets. In conclusion, small Co additions improve the Curie temperature, especially if combined with W.

36 MATERIALS SCIENCE↗

Organic superbases in Lewis pair catalyzed hydrogenations of imines

Organic superbases have recently emerged as powerful components in metal-free catalytic systems, yet their role in frustrated Lewis pair (FLP) catalyzed hydrogenation reactions remain underexplored. In this article, we investigate the diphosphazene superbases P 2 - t Bu (1) and P 2 -Et (2) as base components combined with electronically tunable boranes of formula 9-(X n -C 6 H 5-n )BBN, where X n = 4-NMe₂, 4-OMe, 4-Me, 4-H, 4-F, 4-OCF 3 , 4-CF 3 , 3,5-(CF3), in FLP-catalyzed hydrogenations of imines. While the more sterically encumbered base 1 forms persistent FLPs whose activity correlates with the hydride affinity of the borane, less hindered base 2 generates Lewis acid–base adducts and displays superior catalytic performance, especially with boranes of lower hydride affinity. A systematic screening identified the adduct 2/9-(4-MeO-C 6 H 4 )BBN as the most active catalytic system, achieving quantitative hydrogenation of N-benzylidene aniline at 80 °C and H 2 pressures as low as 40 bar in THF. Multinuclear NMR spectroscopic studies and DFT calculations support a mechanistic scenario in which reversible adduct formation and subsequent dissociation to the free acid–base pair precede heterolytic H₂ cleavage, with adduct stability and borane electrophilicity concurrently dictating catalytic activity. Under optimized conditions, the most active catalyst system, 2/9-(4-MeO-C 6 H 4 )BBN, hydrogenates a broad range of aldimines, including electron-rich 4-NMe₂ and push-pull substrates, mono- and bis-ortho-substituted imines, and selected heteroaryl imines, with excellent yields and selectivity. Collectively, these findings establish design principles for tuning BBN-derived FLP systems and expand the scope of metal-free hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and properties of titanomagnetite (Fe3-xTixO4) nanoparticles: A tunable solid-state Fe(II/III) redox system

Titanomagnetite (Fe3-xTixO4) nanoparticles were synthesized by room temperature aqueous precipitation, in which Ti(IV) replaces Fe(III) and is charge compensated by conversion of Fe(III) to Fe(II) in the unit cell. A comprehensive suite of tools was used to probe composition, structure, and magnetic properties down to site-occupancy level, emphasizing distribution and accessibility of Fe(II) as a function of x. Synthesis of nanoparticles in the range 0 ≤ x ≤ 0.6 was attempted; Ti, total Fe and Fe(II) content were verified by chemical analysis. TEM indicated homogeneous spherical 10 12 nm particles. μ-XRD and Mössbauer spectroscopy on anoxic aqueous suspensions verified the inverse spinel structure and Ti(IV) incorporation in the unit cell up to x ≤ 0.38, based on Fe(II)/Fe(III) ratio deduced from the unit cell edge and Mössbauer spectra. Nanoparticles with a higher value of x possessed a minor amorphous secondary Fe(II)/Ti(IV) phase. XANES/EXAFS indicated Ti(IV) incorporation in the octahedral sublattice (B-site) and proportional increases in Fe(II)/Fe(III) ratio. XA/XMCD indicate these increases arise from increasing B-site Fe(II), and that these charge-balancing equivalents segregate to those B-sites near particle surfaces. Dissolution studies showed that this segregation persists after release of Fe(II) into solution, in amounts systematically proportional to x and thus the Fe(II)/Fe(III) ratio. A mechanistic reaction model was developed entailing mobile B-site Fe(II) supplying a highly interactive surface phase that undergoes interfacial electron transfer with oxidants in solution, sustained by outward Fe(II) migration from particle interiors and concurrent inward migration of charge-balancing cationic vacancies in a ratio of 3:1.

Environmental Molecular Sciences Laboratory↗

Ionic complexation of endblock-sulfonated thermoplastic elastomers and their physical gels for improved thermomechanical performance

Thermoplastic elastomers (TPEs) composed of nonpolar triblock copolymers constitute a broadly important class of (re)processable network-forming macromolecules employed in ubiquitous commercial applications. Physical gelation of these materials in the presence of a low-volatility oil that is midblock-selective yields tunably soft TPE gels (TPEGs) that are suitable for emergent technologies ranging from electroactive, phase-change and shape-memory responsive media to patternable soft substrates for flexible electronics and microfluidics. Many of the high-volume TPEs used for these purposes possess styrenic endblocks that are inherently limited by a relatively low glass transition temperature. To mitigate this shortcoming, we sulfonate and subsequently complex (and physically crosslink) the endblocks with trivalent Al3+ ions. Doing so reduces the effective hydrophilicity of the sulfonated endblocks, as evidenced by water uptake measurements, while concurrently enhancing the thermomechanical stability of the corresponding TPEGs. Chemical modification results, as well as morphological and property development, are investigated as functions of the degree of sulfonation, complexation and TPEG composition. (C) 2020 Published by Elsevier Inc.

36 MATERIALS SCIENCE↗

Bridging the Energy Future: The Role and Potential of Hydrogen Co-Firing with Natural Gas

In the transition toward sustainable energy systems, the co-firing of hydrogen (H2) with natural gas emerges as a critical technology for cleaner power generation. This study examines its benefits, including emissions reduction, enhanced efficiency, and compatibility with existing infrastructure. Concurrently, it addresses the inherent challenges, such as combustion dynamics, necessary infrastructure modifications, and economic considerations. Incorporating global case studies, the review explores recent advancements in hydrogen production and co-firing, evaluating their practicality and operational efficiency. It also provides a critical examination of the economic implications and societal acceptance, which are crucial for the adoption of hydrogen technologies. Moreover, the review investigates the synergy between hydrogen and renewable energy technologies, assessing potential impacts on energy policy and regulation. Ultimately, this comprehensive analysis underscores the essential role of hydrogen co-firing in the energy sector and advocates for a comprehensive strategy that synergizes technological progress, economic viability, regulatory support, and public engagement to promote a resilient and sustainable energy future.

hydrogen co-firing↗

Double sweep preconditioner for optimized Schwarz methods applied to the Helmholtz problem

This paper presents a preconditioner for non-overlapping Schwarz methods applied to the Helmholtz problem. Starting from a simple analytic example, we show how such a preconditioner can be designed by approximating the inverse of the iteration operator for a layered partitioning of the domain. The preconditioner works by propagating information globally by concurrently sweeping in both directions over the subdomains, and can be interpreted as a coarse grid for the domain decomposition method. The resulting algorithm is shown to converge very fast, independently of the number of subdomains and frequency. The preconditioner has the advantage that, like the original Schwarz algorithm, it can be implemented as a matrix-free routine, with no additional preprocessing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A time-dependent neutron transport method of characteristics formulation with time derivative propagation

A new time-dependent Method of Characteristics (MOC) formulation for nuclear reactor kinetics was developed utilizing angular flux time-derivative propagation. This method avoids the requirement of storing the angular flux at previous points in time to represent a discretized time derivative; instead, an equation for the angular flux time derivative along 1D spatial characteristics is derived and solved concurrently with the 1D transport characteristic equation. This approach allows the angular flux time derivative to be recast principally in terms of the neutron source time derivatives, which are approximated to high-order accuracy using the backward differentiation formula (BDF). This approach, called Source Derivative Propagation (SDP), drastically reduces the memory requirements of time-dependent MOC relative to methods that require storing the angular flux. An SDP method was developed for 2D and 3D applications and implemented in the computer code DeCART in 2D. DeCART was used to model two reactor transient benchmarks: a modified TWIGL problem and a C5G7 transient. The SDP method accurately and efficiently replicated the solution of the conventional time-dependent MOC method using two orders of magnitude less memory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of organic acids and sulfate on the biogeochemical properties of soil from urban subsurface environments

Urban subsurface environments are often different from undisturbed subsurface environments due to the impacts of human activities. For example, deterioration of underground infrastructure can introduce elevated levels of Ca, Fe, and heavy metals into subsurface soils and groundwater. Likewise, leakage from sewer systems can lead to contamination by organic C, N, S, and P. However, the impact of these organic and inorganic compounds on biogeochemical processes including microbial redox reactions, mineral transformations, and microbial community transitions in urban subsurface environments is poorly understood. Here we conducted a microcosm experiment with soil samples from an urban construction site to investigate the possible biotic and abiotic processes impacted when sulfate and acetate or lactate were introduced into an urban subsurface environment. In the top-layer soil (0-0.3 m) microcosms, which were highly alkaline (pH > 10), the major impact was on abiotic processes such as secondary mineral precipitation. In the mid-layer (2-3 m) soil microcosms, the rate of Fe(III)-reduction and the amount of Fe(II) produced were greatly impacted by the specific organic acid added, and sulfate-reduction was not observed until after Fe(III)-reduction was complete. Near the end of the incubation, some genera related to syntrophic acetate oxidation and methanogenesis were observed in the lactateamended microcosms. In the bottom-layer (7-8 m) soil microcosms, the rate of Fe(III)-reduction and the amount of Fe(II) produced were affected by the concentration of amended sulfate. Sulfate-reduction was concurrent with Fe(III)-reduction, suggesting that Fe(II) production was likely due to abiotic reduction of Fe(III) by sulfide produced by microbial sulfate reduction. The slightly acidic initial pH (~5.8) of the mid-soil system was a major factor controlling sequential microbial Fe(III) and sulfate reduction versus parallel Fe(III) and sulfate reduction in the bottom soil system, which had a neutral initial pH (~7.2). Finally, 16S rRNA gene-based community analysis revealed a variety of indigenous microbial groups including alkaliphiles, dissimilatory iron and sulfate reducers, syntrophes, and methanogens tightly coupled with, and impacted by, these complex abiotic and biogeochemical processes occurring in urban subsurface environments.

54 ENVIRONMENTAL SCIENCES↗

Short-lived noble gas effluent trends from a research reactor

An understanding of anthropogenic sources of radioactive noble gases in the atmosphere is needed to enhance the discrimination ability of the International Monitoring System's sensors. These sources include commercial and research nuclear reactors and medical isotope production facilities. While abiding by local environmental ordinances these facilities all emit noble gas radioisotopes through normal operation. Here, this research presents measurements and analysis of noble gas isotopes ( 41 Ar, 135 Xe, 135m Xe, 137 Xe, 138 Xe, 87 Kr, 88 Kr, and 89 Kr) made directly at the stack of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. The Xe and Kr noble gases are concurrently observed with 41 Ar, a neutron activation product, when the reactor is operational. The magnitude of the Xe and Kr noble gases released is not constant over the HFIR cycle, but they temporally match the 41 Ar trend. An isotope activity ratio analysis of these shorter lived isotopes combined with the observation of the cycle's temporal trend helps understand the noble gas production mechanism at the HFIR. Isotopes with short half-lives are not useful for long-range environmental monitoring. However, these measurements could potentially be combined with atmospheric modeling to predict the background source term of the longer-lived Xe ratios at a monitoring station.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Qualitative Evaluation of a Novel 3D Volumetric Radiotherapy Segmentation Tool

A novel 3D volumetric segmentation tool allows the user to outline using a small number of points on a range of planes. Unique 3D volumetric “sculpting” tools enable editing of the resulting structures across multiple slices concurrently. This article reports the results of radiation oncologists' preclinical evaluation of the tool.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Neutron diffraction study of magnetic ordering in high pressure phases of rare earth metal holmium

The magnetic ordering in rare earth metals is well established for ambient pressure crystal structures, however, little is known about the magnetic ordering in their corresponding high-pressure crystalline modifications. Holmium (Ho) was studied in a large-volume diamond anvil cell at the Spallation Neutron Source to high-pressure up to 20 GPa and to low-temperature to 10 K. We have conducted two independent high-pressure low-temperature experiments under non-hydrostatic and quasi-hydrostatic pressure conditions respectively. The ambient pressure hexagonal close packed (hcp) phase of holmium shows two magnetic transitions below 10 GPa one to an incommensurate Antiferromagnetic (AFM) phase and another to a conical-Ferromagnetic (c-FM) phase. In contrast, alpha-Samarium-type (α-Sm) phase above 10 GPa and the double hexagonal close packed (dhcp) phase above 19 GPa show only one FM transition marked by the appearance of a magnetic peak at 3 Å and the concurrent enhancement of nuclear peaks below 30 K. Finally, these new transitions observed by neutron diffraction can be accounted by a commensurate superlattice formation along c-axis in both the α-Sm-type phase and the dhcp phase.

36 MATERIALS SCIENCE↗

On the implementation of dislocation reactions in continuum dislocation dynamics modeling of mesoscale plasticity

The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the transport equations of the vector density-based continuum dislocation dynamics. This formulation aims to rigorously enforce dislocation line continuity using the concept of virtual dislocations that close all dislocation loops involved in cross slip, annihilation, and glissile and sessile junction reactions. The addition of virtual dislocations enables us to accurately enforce the divergence free condition upon the numerical solution of the dislocation transport equations for all slip systems individually. A set of tests were performed to illustrate the accuracy of the formulation and the solution of the transport equations within the vector density-based continuum dislocation dynamics. Comparing the results from these tests with an earlier approach in which the divergence free constraint was enforced on the total dislocation density tensor or the sum of two densities when only cross slip is considered shows that the new approach yields highly accurate results. Bulk simulations were performed for a face centered cubic crystal based on the new formulation and the results were compared with discrete dislocation dynamics predictions of the same. The microstructural features obtained from continuum dislocation dynamics were also analyzed with reference to relevant experimental observations.

36 MATERIALS SCIENCE↗