Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHINA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Evaluation of a Seismic Event, 12 May 2010, in North Korea

We assess seismological evidence bearing on claims that North Korea conducted a small nuclear test on 12 May 2010 in the vicinity of known underground nuclear tests in 2006, 2009, 2013, and 2016. First, we use Lg -wave cross-correlation and more traditional methods to locate the 2010 event between about 4 and 10 km southwest of the 2009 test. Second, we compare the relative sizes of regional P-waves and S-waves, using stations within 400 km of the known North Korean nuclear tests, to assess the nature of the event. We measured P / S ratios at different frequencies, at first using data from the open station MDJ in northeast China, for training sets of earthquakes and of explosions. We developed a linear discriminant function (LDF), that, in application to P / S measured at MDJ, is most effective in separating the earthquake and explosion populations. MDJ lacks usable data for the event of interest, but we have obtained regional data from stations of the nearby Dongbei Broadband Seismographic Network (DBSN), for the event of 12 May 2010 and for nearby underground nuclear tests conducted in 2006 and 2009. When our LDF is applied to DBSN data, and to data from stations SMT and NE3C in China, the LDF values measured from P/S ratios from known explosions are explosion-like; but for the event of 12 May 2010 the LDF values are earthquake-like for frequencies between 6 and 12 Hz. Furthermore, our method for characterizing earthquakes and explosions on the basis of their regional signals can be widely applied. Measurements of P / S based upon three-component waveform data provide better discrimination power than do those based upon vertical-component data alone.

58 GEOSCIENCES↗

International Monitoring System Correlation Detection at the North Korean Nuclear Test Site at Punggye-ri with Insights from the Source Physics Experiment

Seismic waveform correlation offers the prospect of greatly reducing event detection thresholds when compared with more conventional processing methods. Correlation is applicable for seismic events that in some sense repeat, that is they have very similar waveforms. A number of recent studies have shown that correlated seismic signals may form a significant fraction of seismicity at regional distances. For the particular case of multiple nuclear explosions at the same test site, regional distance correlation also allows very precise relative location measurements and could offer the potential to lower thresholds when multiple events exist. Using the Comprehensive Nuclear-Test-Ban Treaty (CTBT) International Monitoring System (IMS) seismic array at Matsushiro, Japan (MJAR), Gibbons and Ringdal (2012) were able to create a multichannel correlation detector with a very low false alarm rate and a threshold below magnitude 3.0. They did this using the 2006 or 2009 Democratic People’s Republic of Korea (DPRK) nuclear explosion as a template to search through a data stream from the same station to find a match via waveform correlation. In this paper, we extend the work of Gibbons and Ringdal (2012) and measure the correlation detection threshold at several other IMS arrays. We use this to address three main points. First, we show the IMS array station at Mina, Nevada (NVAR), which is closest to the Nevada National Security Site (NNSS), is able to detect a chemical explosion that is well under 1 ton with the right template. Second, we examine the two IMS arrays closest to the North Korean (DPRK) test site (at Ussuriysk, Russian Federation [USRK] and Wonju, Republic of Korea [KSRS]) to show that similarly low thresholds are possible when the right templates exist. We also extend the work of Schaff et al. (2012) and measure the correlation detection threshold at the nearest Global Seismic Network (GSN) three-component station (MDJ) at Mudanjiang, Heilongjiang Province, China, from the New China Digital Seismograph Network (IC). To conclude, we use these results to explore the recent claim by Zhang and Wen (2015) that the DPRK conducted “…a low-yield nuclear test…” on 12 May 2010.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Subcontract Report: Final Report on Assessment of Motor Technologies for Traction Drives of Hybrid and Electric Vehicles (Subcontract #4000080341)

Currently, interior permanent magnet (IPM) motors with rare-earth (RE) magnets are almost universally used for hybrid and electric vehicles (EVs) because of their superior properties, particularly power density. However, there is now a distinct possibility of limited supply or very high cost of RE magnets that could make IPM motors unavailable or too expensive. Because development of electric motors is a critical part of the U.S. Department of Energy (DOE) Advanced Power Electronics and Motors activity, DOE needs to determine which options should be investigated and what barriers should be addressed. Therefore, in order to provide a basis for deciding which research topics should be pursued, an assessment of various motor technologies was conducted to determine which, if any, is potentially capable of meeting FreedomCAR 2015 and 2020 targets. Highest priority was given to IPM, surface mounted permanent magnet (SPM), induction, and switched reluctance (SR) motors. Also of interest, but with lesser emphasis, were wheel motors, multiple-rotor motors, motors with external excitation, and several others that emerged from the assessment. Cost and power density (from a design perspective, the power density criterion translates to torque density) are emerging as the two most important properties of motors for traction drives in hybrid and EVs, although efficiency and specific power also are very important. The primary approach for this assessment involved interviews with original equipment manufacturers (OEMs), their suppliers, and other technical experts. For each technology, the following issues were discussed: (1) The current state-of-the-art performance and cost; (2) Recent trends in the technology; (3) Inherent characteristics of the motor - which ones limit the ability of the technology to meet the targets and which ones aid in meeting the target; (4) What research and development (R&D) would be needed to meet the targets; and (5) The potential for the technology to meet the targets. The interviews were supplemented with information from past Oak Ridge National Laboratory (ORNL) reports, previous assessments that were conducted in 2004, and literature on magnet technology. The results of the assessment validated the DOE strategy involving three parallel paths: (1) there is enough of a possibility that RE magnets will continue to be available, either from sources outside China or from increased production in China, that development of IPM motors using RE magnets should be continued with emphasis on meeting the cost target. (2) yet the possibility that RE magnets may become unavailable or too expensive justifies efforts to develop innovative designs for permanent magnet (PM) motors that do not use RE magnets. Possible other magnets that may be substituted for RE magnets include samarium-cobalt (Sm-Co), Alnico, and ferrites. Alternatively, efforts to develop motors that do not use PMs but offer attributes similar to IPM motors also are encouraged. (3) New magnet materials using new alloys or processing techniques that would be less expensive or have comparable or superior properties to existing materials should be developed if possible. IPM motors are by far the most popular choice for hybrid and EVs because of their high power density, specific power, and constant power-speed ratio (CPSR). Performance of these motors is optimized when the strongest possible magnets - i.e., RE neodymium-iron-boron (NdFeB) magnets - are used.

33 ADVANCED PROPULSION SYSTEMS↗

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exacerbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectronic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availability of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology. The primary objective of this project was to develop a commercially viable process for 'Substrates' (Substrate/ undercoat/ TCO topcoat) to be used in production of OLED devices (lamps/luminaries/modules). This project focused on using Arkema's recently developed doped ZnO technology for the Fenestration industry and applying the technology to the OLED lighting industry. The secondary objective was the use of undercoat technology to improve light extraction from the OLED device. In optical fields and window applications, technology has been developed to mitigate reflection losses by selecting appropriate thicknesses and refractive indices of coatings applied either below or above the functional layer of interest. This technology has been proven and implemented in the fenestration industry for more than 15 years. Successful completion of this project would provide doped ZnO coated on inexpensive soda lime glass resulting in a significantly lower cost relative to the current ITO coated Flat Panel Display Glass substrates. Additional benefits will be a more consistent TCO that does not need an activation step with better optical performance. Clearly, this will serve to enhance penetration of OLED technologies into the lighting market.

54 ENVIRONMENTAL SCIENCES↗

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exaserbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectonic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availablility of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

BAZAAR DIPLOMACY: Examining Iran's Nuclear Bargaining Tactics

Since undeclared elements of Iran’s nuclear program were revealed in 2002, Tehran has engaged in a decade of efforts to justify and advance its nuclear program. Unlike North Korea’s withdrawal from the Nuclear Nonproliferation Treaty (NPT), Iran has maximized advantage and minimized backlash by maneuvering near the borders of the NPT system. Iran has embraced a three-pronged approach to bargain with the international community: (1) divide international opposition, (2) delay international monitoring, negotiations, and sanctions, (3) and defy international monitoring, commitments, and pressure. Iran’s nuclear bargaining can be divided into several time periods, and Iran used divide, delay, and defy tactics in each period. During the first phase from 2003 to 2005, Iranian reformist leader Mohammad Khatami was more willing to negotiate with the international community, but his ability to negotiate was constrained domestically and particularly during his last year of leadership. Tehran mainly negotiated with the France, Germany, and the United Kingdom – the European 3 (EU-3) – to drive a wedge between European and U.S. pressures on Iran and to delay outside monitoring and prevent international sanctions. It is in this early period that Iran developed its range of divide, delay, and defy tactics. For divide, Iran negotiated with the EU-3 because Europe had a close and influential relationship with the United States, whereas other international actors such as Russia and China were powerful but could not form an united bloc against the U.S. Iran began to delay international monitoring of its nuclear program by creating hurdles for international inspectors, stalling requests for information, and not volunteering information but providing updates only when Iranian nuclear developments were exposed by other parties. Iranian diplomats also delayed negotiations and sanctions by framing talks, negotiating and responding slowly to offers, providing false hopes and the appearance of concessions before key international events and resolutions, and adopting temporary and shifting negotiating positions. To defy, Iran modified and razed nuclear sites to prevent detection, used legalistic and minimal interpretations to subvert commitments, argued for an international right to enrich uranium, and proclaimed a fatwa against nuclear weapons. After President Mahmoud Ahmadinejad came to power in 2005, Iran took a tougher stance internationally. Ahmadinejad and his cabinet did not provide major concessions to facilitate international negotiations, were less willing to seriously consider proposals to curb Iran’s nuclear program, and linked Iran’s nuclear program to sovereignty and national pride. Realizing that Europe was less optimistic about negotiations, Ahmadinejad leveraged Russia and China to Iran’s advantage. Both countries helped delay and dilute United Nations Security Council resolutions against Iran. Ahmadinejad employed more tactics to defy international monitoring and pressure. These tactics involved demonstrating Iran’s nuclear progress even as Tehran engaged in negotiations over its program. Iran also increased the cost of failed negotiations by sustaining and escalating regional and global tensions to coincide with international events and resolutions that criticized or condemned Iran’s nuclear program. The third and present phase of Iranian nuclear bargaining began during Ahmadinejad’s second term as president (2009-2012). During this period, Ahmadinejad’s power significant weakened and domestic turf wars made Iranian nuclear negotiations unpredictable and at times contradictory. Due to the domestic situation and the exhausting of successful divide and delay tactics, Iran began using more defy tactics. Iran, for example, considered enriching uranium to a higher percentage for naval reactors, warned of closing the Straits of Hormuz, and engaged in terrorist acts against the West and its allies. Currently, Iran’s range of bargaining options has narrowed, with many divide and delay tactics less useful since the international community has become more aware of Iranian efforts to stall and buy time. While Iran leaders have employed more acts of defiance, Iran’s ability to sustain its defy tactics are waning and it is still possible to prevent greater confrontation between Iran and the West.

99 GENERAL AND MISCELLANEOUS↗

Building Energy Monitoring and Analysis

U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Strategies for Local Low-Carbon Development

Cities around the world are implementing policies and programs with the goal to reduce greenhouse gas emissions, as well as save energy, reduce costs, and protect the local, regional, and global environment. In China, low-carbon development is a key element of the 12th Five Year Plan. Pilot low-carbon development zones have been initiated in five provinces and eight cities and many other locations around China also want to pursue a low-carbon development pathway. This booklet provides information for government officials, policy makers, program designers and implementers, provincial and city planners, and others who want an overview of the key options available for low-carbon development at local level. These Strategies for Local Low-Carbon Development draw from successful experiences from around the world. Information is provided for low-carbon actions that can be taken in the sectors of (1) Industry, (2) Buildings and Appliances, (3) Electric Power, (4) Consumption and Waste Management, (5) Transportation and Urban Form, and (6) Agriculture and Forestry. A description of each policy is provided along with information on the stakeholders involved in implementation, the conditions for successful implementation, the expected energy and carbon savings, and the policy cost-effectiveness. Case studies show how each policy has been implemented somewhere around the world. While there are many low-carbon options available for local implementation, this booklet aims to provide guidance on those that have been most successful, that have the largest impact, and that are cost-effective in order to support low-carbon development efforts in Chinese cities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

International comparison of product certification and verification methods for appliances

Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

International Comparison of Product Certification and Verification Methods for Appliances

Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE F 241.3_DE-EE0006097_FINAL

In this project, Optony deployed the Sustainable Energy for Business Districts (SEBIZ) model to address China’s surging urban energy needs and greenhouse gas emissions via a district-level Energy Efficiency and Renewable Energy (EERE) and smart grid technology deployment strategy. The SEBIZ approach built local capacity and demonstrated the opportunities and benefits for ongoing improvements to and investments in energy infrastructure through market-based project development and an innovative, highly-effective applied public policy development model. Furthermore, the SEBIZ program used real-world examples and resources to formulate appropriate policy, program and educational guidance for similar areas and cities around China and internationally.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Simulation of CO 2 Storage

This report is a compilation of Lawrence Livermore National Laboratory’s (LLNL) accomplishments on CO 2 storage simulation and modeling research, performed for the US-­China Clean Energy Research Center (CERC). Within the CERC project management structure, this work is referred to as Subtask 6.4.a Simulation and Modeling. The task falls under CERC’s Advanced Coal Technology Consortium (ACTC) Research Theme 6—CO 2 Sequestration Capacity and Near-­Term Opportunities. The goals of the task were to develop new CO 2 sequestration simulation approaches and tools, then apply them to CO 2 storage projects in the U.S. and China. Work on this task paused when funding was redirected to CERC’s other efforts. Two sections of this report provide valuable snapshot of LLNL’s progress when funding was curtailed: 1) Section 5.2.2 is a 14-­page presentation written January 8, 2013; and 2) Section 5.1.3 is a progress report from the first quarter of Fiscal year 2013.

20 FOSSIL-FUELED POWER PLANTS↗

A Review of Commercially Available Technologies in Developing Low Carbon Eco-cities

Half of China’s population now lives in cities whose rapidly increasing populations burden already crowded infrastructure and exacerbate environmental and climate change stresses, threatening public health and quality of life (Chinese Society for Urban Studies 2011; Zhou and Williams 2013). To help address these challenges, China’s central and local governments have moved aggressively toward building low-carbon eco-cities, which have significant potential to mitigate and adapt to climate change (Zhou, He, and Williams 2012). However, there is a lack of information to assist policy makers in defining low-carbon eco-cities, evaluating progress toward low-carbon and ecological goals, and finding information on policies and technologies to improve the performance of developing a low-carbon eco-cites.

54 ENVIRONMENTAL SCIENCES↗

Carbon Fiber Manufacturing Facility Siting and Policy Considerations: International Comparison

Carbon fiber is increasingly used in a wide variety of applications due largely to its superior material properties such as high strength-to-weight ratio. The current global carbon fiber manufacturing industry is predominately located in China, Europe, Japan, and the United States. The carbon fiber market is expected to expand significantly through 2024 and to require additional manufacturing capacity to meet demand. Carbon fiber manufacturing facilities can offer significant economic development and employment opportunities as exemplified by the $1 billion investment and 500 jobs expected at a new Toray plant in Moore, South Carolina. Though the market is expected to expand, it is unclear where new manufacturing facilities will locate to meet demand. This uncertainty stems from the lack of research evaluating how different nations with significant carbon fiber manufacturing capacity compare as it relates to certain manufacturing facility siting factors such as costs of labor and energy as well as policy directed at supporting carbon fiber development, domestic deployment, and exports. This report fills these gaps by evaluating the top carbon fiber manufacturing countries, including China, European Union countries, Japan, Mexico, South Korea, Taiwan, and the United States. The report documents how the United States compares to these countries based on a range of manufacturing siting considerations and existing policies related to carbon fiber. It concludes with a discussion of various policy options the United States could adopt to both (1) increase the competitiveness of the United States as it relates to attracting new carbon fiber manufacturing and (2) foster broader end-use markets for deployment.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Strategic Stability in South Asia: An Indian?s Perspective.

The security environment in South Asia has been marked by instability for several decades. The foremost causes of regional instability are the nuclear weapons-cum-missile development program of China, North Korea and Pakistan, the strident march of Islamist fundamentalism, the diabolical nexus between narcotics trafficking and terrorism, the proliferation of small arms and the instability inherent in the rule of despotic regimes. Instability on the Indian sub-continent is manifested, first and foremost, in the continuing conflict in Afghanistan, its tense relations with Iran and the Central Asian Republics (CARs); Pakistan’s struggle against the Taliban, the emerging fissiparous tendencies in Balochistan and Pakhtoonkhwa, the rise of Jihadi Islam and what some fear is Pakistan’s gradual slide towards becoming a ‘failed state’ despite some economic gains in the last five years. Also symptomatic of an unstable and uncertain security environment in the South Asian region are what some see as Sri Lanka’s inability to find a lasting solution to its internal challenges; the potential for Bangladesh’s gradual emergence as the new hub of Islamist fundamentalist terrorism and its struggle for economic upliftment to subsistence levels; the continuing negative impact of Maoist insurgency on Nepal’s fledgling democracy; the simmering discontent in Tibet and Xinjiang and what some see as a low-key uprising against China’s regime; and, the Myanmar peoples’ nascent movement for democracy. In all these countries, socio-economic development has been slow and, consequently, per capita income is alarmingly low. Transborder narcotics trafficking – the golden triangle lies to the east of South Asia and the golden crescent to its west – and the proliferation of small arms, make a potent cocktail. Ethnic tensions and fairly widespread radicalization, worsened by the advent of the vicious ideology of the Islamic state, add further to regional instability.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Development of Long-Pulse Heating and Current Drive Actuators and Operational Techniques Compatible with a High-Z Divertor and First Wall

Accurate measurement of the edge electron density profile is essential to optimizing antenna coupling and assessment of impurity contamination in studying long-pulse plasma heating and current drive in fusion devices. Measurement of the edge density profile has been demonstrated on the US fusion devices such as C-Mod, DIII-D, and TFTR amongst many devices, and has been used for RF loading and impurity modeling calculations for many years. University of Science and Technology of China (USTC) has recently installed a density profile reflectometer system on the EAST fusion device at the Institute of Plasma Physics, Chinese Academy of Sciences in China based on the University of California Los Angeles (UCLA)-designed reflectometer system on the DIII-D fusion device at General Atomics Company in San Diego, California. UCLA has been working with USTC to optimize the existing microwave antenna, waveguide system, microwave electronics, and data analysis to produce reliable edge density profiles. During the past budget year, progress has been made in all three major areas: effort to achieve reliable system operations under various EAST operational conditions, effort to optimize system performance, and effort to provide quality density profiles into EAST’s database routinely.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of Regional Climate Change Final Technical Report

Anthropogenic activity of fossil fuel and biomass burning emissions increase tropospheric aerosol concentrations causing a direct cooling effect by scattering solar radiation and thus increasing the Earth’s albedo. In addition, the aerosols can act as cloud condensation nuclei to regulate cloud droplet number and size, thereby changing both the cloud albedo, and the cloud lifetime and precipitation. Thus, the aerosol climate effect concerns intricate aerosol-cloud-radiation-precipitation interactions which are recognized to introduce the largest uncertainties in using GCMs to project future regional climate changes. The climate effects of aerosols are significant in the land regions of the Northern Hemisphere, in particular the sulfate aerosols over East Asia where significant anthropogenic SO 2 emissions have been observed and concentrations of other aerosol species are also high. The objective of the present project is to advance “modeling aerosol-cloud-climate interactions” in two areas: the aerosol-cloud microphysics interactions and model simulations of aerosol effects on regional climate with focus on East Asia. To achieve the objective, in addition to analyzing relevant observations, the project conducts and diagnoses regional and global climate model simulations. Specifically, two collaborative tasks were carried out: Task-1: Incorporating a physics-based, two-moments cloud scheme developed by J. P. Chen/National Taiwan University (NTU) into regional models (WRF and WRF-Chem) to study “aerosol-cloud microphysics interactions over eastern China and the southeast Pacific” ; for latter region, CMIP5 models exhibit distinct biases in (weaker) cloud radiative effects and (warmer) sea surface temperature. The task is conducted in collaboration with J.-P. Chen, H.-W. Xue/Peking University, and H. Liao/Institute of Atmospheric Physics; and Task-2: Diagnosis of NCAR-CESM and WRF model simulations of “aerosol climate effects” focusing on changes of circulation, precipitation and clouds over East Asia. The task is conducted in collaboration with J.-P. Chen, and I-Chun Tsai & H.-H. Hsu/Academia Sinica. For each task, several topical studies were carried out and documented in eleven (11) articles (five for Task-1 and six for Task-2), published in: J. Atmospheric Sciences (2); J. Climate (1); Climate Dynamics (3); J. Geophysical Research (2); Geophysical Research Letter (1); Int. J. Climatology (1); and Advances in Atmospheric Sciences (1). In addition, Wei-Chyung Wang (the PI) continues serving as the U. S. Chief Scientist for the joint agreement, “Climate Sciences”, between the U. S. DOE and China Ministry of Sciences and Technology (Riches et al., 2010). In this capacity, he works closely with Michael Riches/DOE (the U. S. Manager) to coordinate the scientific exchanges (visiting scientists) between the two countries. Educations (graduate students) and trainings (postdoctoral research associates) are key elements of the research project.

54 ENVIRONMENTAL SCIENCES↗

Energy Security and Supply Perspective FY11Q4

This presentation discusses energy security issues such as continued dependence of U.S. on imported oil; growing dependence of China on imported oil; complete dependence of Japan on imported energy; continued dependence of European on imported oil and natural gas; open question whether expected growth in China coal demand can be met.

02 PETROLEUM↗