Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CASTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Computational Design of a Novel Medium-Carbon, Low-Alloy Steel Microalloyed with Niobium

The design of a new steel with specific properties is always challenging owing to the complex interactions of many variables. In this work, this challenge is dealt with by combining metallurgical principles with computational thermodynamics and kinetics to design a novel steel composition suitable for thermomechanical processing and induction heat treatment to achieve a hardness level in excess of 600 HV with the potential for good fracture toughness. CALPHAD-based packages for the thermodynamics and kinetics of phase transformations and diffusion, namely Thermo-Calc{sup ®} and JMatPro{sup ®}, have been combined with an interdendritic segregation tool (IDS) to optimize the contents of chromium, molybdenum and niobium in a proposed medium-carbon low-manganese steel composition. Important factors taken into account in the modeling and optimization were hardenability and as-quenched hardness, grain refinement and alloying cost. For further investigations and verification, the designed composition, i.e., in wt.% 0.40C, 0.20Si, 0.25Mn, 0.90Cr, 0.50Mo, was cast with two nominal levels of Nb: 0 and 0.012 wt.%. The results showed that an addition of Nb decreases the austenite grain size during casting and after slab reheating prior to hot rolling. Validation experiments showed that the predicted properties, i.e., hardness, hardenability and level of segregation, for the designed composition were realistic. It is also demonstrated that the applied procedure could be useful in reducing the number of experiments required for developing compositions for other new steels.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructure and Mechanical Properties of Low-Activation Fe-Cr-V Multicomponent Single-Phase Alloys

A ternary equiatomic and nearly equiatomic alloy composed of the low-activation elements Fe, Cr, and V was designed for potential application as low-activation structural materials for the first wall of fusion reactors. The optimal composition of the multicomponent alloy was determined by minimizing the Gibbs free energy for solid-solution formation. The microstructure, phase stability, and mechanical properties of the equiatomic and optimized Fe-Cr-V alloys were studied. The equiatomic alloy consisted of a body-centered-cubic (BCC) solid-solution phase with a small amount of a face-centered-cubic (FCC) solid-solution phase, whereas the optimized alloy consisted of a single BCC solid-solution phase in the as-cast state. The crystal grains of both alloys were equiaxial. No phase transition was observed in the optimized alloy after homogenization; however, for the equiatomic alloy, the FCC solid-solution phase disappeared and surface relief was observed. The Vickers microhardness and yield strength of the Fe-Cr-V alloys increased after homogenization compared with those of the as-cast alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Experimental Investigation of the System Nonmetallic Inclusion-Molten Steel-Refractory System at High Temperatures

In continuous casting, the buildup of particles in the flow control system is called clogging. Clogging may be caused by preexisting nonmetallic inclusions attached to the refractory wall, interrupting or disturbing the fluid flow conditions. The interfacial properties of the nonmetallic inclusion-molten steel-refractory system are believed to play a key role in the clogging tendency of selected steel grades in contact with ceramics. The combination of a high-temperature laser scanning confocal microscope (HT-LSCM), which is employed for in situ observation of inclusions’ behavior in the liquid steel or at the steel/ceramic interface, and a high-temperature drop shape analyzer (HT-DSA), which is utilized for contact angle measurements, enabled the investigation of reactions and interactions in the described system at experimental temperatures of approximately 1600 °C. The objective of this study was to develop a method to obtain qualitative information on the deposition of nonmetallic inclusions (NMIs) in the submerged entry nozzle (SEN) during casting. The behavior of solid NMIs from a calcium-treated steel at the interface between liquid steel and Al{sub 2}O{sub 3} or MgO was investigated by means of HT-LSCM. During the test evaluation, inclusions were found to separate at the steel/ceramic interface due to an attractive force. This force increased with the NMIs’ size as well as with the ceramic particle change. The HT-DSA provided contact angle data between molten steel and the ceramic used for implementation into the theoretical capillary force model. A clear correspondence between the estimated and calculated capillary forces was observed. The change in the wettability of the system, as induced by the change in the ceramic from MgO to Al{sub 2}O{sub 3}, showed a reduction of the attractive forces, indicating a weaker separation toward the SEN for the same inclusion type. This study confirmed the strong potential of wettability investigations to predict the clogging tendency of certain steel grades.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructural Characterization, Mechanical Properties, and Corrosion Resistance of Dental Co-Cr-Mo-W Alloys Manufactured by Selective Laser Melting

In this paper, the microstructure, mechanical properties, and corrosion resistance of the dental Co-Cr-Mo-W alloys fabricated by selective laser melting (SLM) were systematically investigated and correlated. The microstructure of the SLM group (SG) specimens is composed of extremely fine columnar crystals, exhibiting supersaturated and homogeneous character. The matrix mainly consists of face-centered-cubic (FCC) cobalt solid solutions, and minimal hexagonal-close-packed (HCP) cobalt solid solutions. Mechanical test results showed that the 0.2% yield strength of SG was 775 ± 7 MPa, and the ultimate tensile strength was 1118 ± 25 MPa. The elongation of SG was 8.28 ± 0.4%, and the microhardness of SG was 476 ± 10 HV. All of these values largely exceeded the cast group (CG) specimens. The high strength is attributed to their fine columnar crystals and supersaturated matrices. The fewer content from the HCP phase and a lack of intermetallic compounds or eutectic contribute to the high ductility. Furthermore, a higher E{sub corr}, lower I{sub corr} were acquired for better corrosion resistance compared to cast specimens, due to even less composition segregation and more microstructural homogeneity.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Comparison of Different Processing Routes for the Synthesis of Semiconducting AlSb

AlSb is a low-cost, high-band-gap semiconducting material, yet largely limited in its potential due to difficulty in the synthesis of single-phase AlSb. The present work compares different processing routes in their potency to produce bulk and nanocrystalline AlSb. Vacuum arc melting has been successfully employed, for the first time, to synthesize single-phase bulk AlSb. Owing to high vapor pressure of Sb, an optimum amount of excess Sb (3%) needs to be added to achieve single-phase line compound AlSb. Two methods, viz. mechanical alloying of elemental powders and mechanical milling of cast alloy, have been used to synthesize nanocrystalline AlSb. Nanocrystalline AlSb could be produced after ball milling the cast alloy; however, prolonged milling results in the appearance of Sb along with a non-stoichiometric Al-Sb-O oxide. Mechanical alloying of Al and Sb does not lead to appearance of single-phase AlSb, and the mixture largely consists of starting material and amorphous products. Therefore, the effectiveness of a synthesis route in producing single-phase AlSb is governed by the tendency of oxygen pickup during the processing.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A Low-Cost Lightweight Entropic Alloy with High Strength

In this study, a series of lightweight Al–Mg system entropic alloys containing Zn, Cu, and Si were designed based on the order/disorder or entropy, and eutectic concepts. The alloys of Al{sub 58.5}Mg{sub 31.5}Zn{sub 4.5}Cu{sub 4.5}Si{sub 1}; Al{sub 63}Mg{sub 27}Zn{sub 4.5}Cu{sub 4.5}Si{sub 1}; Al{sub 66.7}Mg{sub 23.3}Zn{sub 4.5}Cu{sub 4.5}Si{sub 1}; Al{sub 80}Mg{sub 14}Zn{sub 2.7}Cu{sub 2.7}Si{sub 0.6}; Al{sub 85}Mg{sub 10.5}Zn{sub 2.025}Cu{sub 2.025}Si{sub 0.45}; and Al{sub 90}Mg{sub 7}Zn{sub 1.35}Cu{sub 1.35}Si{sub 0.3} were prepared by induction melting under a high-purity argon atmosphere and then casted into stainless steel molds. The microstructures which were tested in the as-cast state exhibited multiphases and contained apparent volume fractions of intermetallic compounds and solid solutions. Then, the compressive mechanical properties of the alloys were measured, and high fracture strengths of 577, 677, 590, 498, 814, and 794 MPa, respectively, were determined. Strong hardening phenomena were observed in the Al{sub 80}Mg{sub 14}Zn{sub 2.7}Cu{sub 2.7}Si{sub 0.6}, Al{sub 85}Mg{sub 10.5}Zn{sub 2.025}Cu{sub 2.025}Si{sub 0.45}, and Al{sub 90}Mg{sub 7}Zn{sub 1.35}Cu{sub 1.35}Si{sub 0.3} alloys at room temperature, with amazing plasticity percentages of 13.8, 24.8, and 32.7%, respectively. The property differences in the lightweight alloys were analyzed using the following parameters: the critical values of the enthalpy of mixing; atomic size differences; ratio of entropy to enthalpy; valence electron concentration (VEC); and Pauling electronegativity difference. Finally, three of the aforementioned parameters (atomic size difference, enthalpy of mixing, and Pauling electronegativity difference) were regarded in this study as the crucial rules for the lightweight multicomponent alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Processing and Properties of CNTs/ADC12 Nanocomposite

Carbon nanotubes (CNTs)-reinforced ADC12 nanocomposite was successfully fabricated via casting. The CNTs-Al master alloy was prepared by hot extrusion, and the CNTs were dispersed into the matrix by a high-intensity ultrasonic treatment during the casting process to yield 0.5, 1.0, 1.5 wt.% of the CNTs/ADC12 composite. The key step in arriving at homogeneous distribution of CNTs was preparation of the CNTs-Al master alloy and the introduction of a high-intensity ultrasonic treatment method. The cavitation bubbles that adhered to the aggregated CNTs closed rapidly and released large amounts of energy, which had an impact via the cavitation effect, which made the aggregated CNTs dissociate and disperse homogeneously into the melt. Under the conditions of ultrasonic power of 2.1 kW and ultrasonic time of 10 min, the mean diameter of α-Al was 53.2 μm, which was 58.9% lower than that of the matrix. The microhardness and the ultimate tensile strength (UTS) of nanocomposite with 1.0 wt.% CNTs addition increased by 29.3 and 27%, respectively, as compared with the matrix. CNTs can be dispersed in the matrix homogeneously. It was observed by scanning electron microscope (SEM) that CNTs as a load-bearing element were embedded in the matrix independently, enhancing the mechanical properties. This suggested that the improvement of mechanical properties could be attributed to the size and degree of CNTs clustering, the load transfer from the matrix to the CNTs and the grain refinement of the nanocomposite.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effects of Thermal Exposure on the Microstructure and Mechanical Properties of Al-Si-Cu-Ni-Mg-Gd Alloy

The present study focused on the effect of thermal exposure on the phase evolution and properties of the cast-T6 Al-12Si-4Cu-2Ni-0.8Mg-xGd (x = 0, 0.1, and 0.2) alloy used for cast piston.The thermal stability of the alloys was studied in the temperature range of 200-300 °C for exposure duration up to 500 h, thus obtaining the relationship between the microstructural evolution and its impact on the mechanical properties. The fine Al{sub 2}Cu phase grew into the coarse θ-Al{sub 2}Cu phases during the thermal exposure, resulting in a decrease in the mechanical strength of the alloy. The thermal stability and stiffness of the Al-Si-Cu-Ni-Mg alloys were improved with the increase in Gd content from 0 to 0.2%.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Friction Stir Processing on the Microstructure, Damping Capacity, and Mechanical Properties of Al-Si Alloy

Friction stir processing (FSP) was conducted on an Al-Si casting alloy. The Si phase and Al grains of an Al-Si casting alloy were refined through FSP. Furthermore, FSP with high rotation rate led to the precipitation of Mg and Si atoms and the formation of Mg{sub 2}Si phase in the Al-Si alloy. Precipitation improved the low-strain damping capacity but deteriorates high-strain damping capacity of the FSP sample at room temperature. At low rotation rate, the FSP sample exhibited excellent high-temperature damping capacity mainly because of its fine grain structure and the low density of its pinning points. The plastic instability of the Al-Si alloy was eliminated by FSP because of the refinement of the Si phase. The increase in the strength of each FSP sample was attributed to the increase in second-phase and boundary strengthening effects. Thus, the mechanical properties and damping capacity of Al-Si were enhanced after FSP.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Microstructural and Property Evolution of Continuous Columnar-Grained Polycrystalline Copper during Extreme Plastic Deformation at Room Temperature

An extreme extensibility with a true strain of 11.12 has been obtained for continuous columnar-grained (CCG) polycrystalline copper at room temperature, which was cold-drawn from a 10-mm-diameter as-cast rod into a 38.5-μm-diameter ultra-fine wire without any intermediate softening heat treatment. During the extreme plastic deformation, the ultimate tensile stress increased from 140 MPa for as-cast CCG copper to 525 MPa for the deformed sample at a true stain of 11.12, while the relative electrical conductivity maintained a high value of 97.6% IACS. On this basis, CCG copper is an excellent raw material for the fabrication of ultra-fine wires with both high strength and high electrical conductivity. The original columnar grains experienced grain subdivision and formed fibrous grains along the drawing direction with a fibrous longitudinal morphology and curly transverse microstructure at medium to high strain. The subdivision of the fibrous grains then went on as the extreme plastic deformation continued. Large amounts of strain-induced boundaries and microstructural refinement facilitated the storage of abundant glide dislocations created by extreme plastic deformation. Thus, extreme plastic extensibility can be achieved through continuous work hardening of CCG copper.

36 MATERIALS SCIENCE↗
DOE OSTI2019

AZ61 and AZ61-La Alloys as Anodes for Mg-Air Battery

AZ61 and AZ61-0.5La (wt.%) alloys are prepared by the conventional casting method and then, AZ61 and AZ61-0.5La alloy sheets are obtained with multi-pass hot rolling. Microstructures and electrochemical properties of four alloys are investigated, and discharge properties are tested by an assembled Mg-air battery using alloy anode sheets with a dimension of 70 × 100 × 2.5 mm. Results show that Al{sub 11}La{sub 3} phases are formed in as-cast AZ61-0.5La alloy and promote the grain refinement and the formation of uniform microstructure in as-rolled AZ61-0.5La alloy. As-rolled AZ61-0.5La alloy exhibits a weak self-corrosion tendency but a strong discharge activity. After discharge test for 5 h, the Mg-air battery based on the as-rolled AZ61-0.5La sheet can provide the maximum power output of 1.625 W, and as-rolled AZ61-0.5La anode can supply the maximum energy density of 1417 mWhg{sup −1}. In addition, the relationship between microstructures and discharge properties is sufficiently described and discussed in this paper.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Nanoindentation Creep Behavior of CoCrFeNiMn High-Entropy Alloy under Different High-Pressure Torsion Deformations

CoCrFeNiMn high-entropy alloy (HEA) has gained increasing attention in recent years. In this work, CoCrFeNiMn HEA was prepared by arc melting and casting method; and high-pressure torsion (HPT) technology was used to refine the grains. A series of nanoindentation experiments was used to investigate the effect of different loading rates and deformations on the nanoindentation creep behavior of the CoCrFeNiMn HEA. The results show that the grain size of the CoCrFeNiMn HEA refines to the nanoscale after HPT. However, grain refinement is not obvious with further increasing HPT rotation. The loading rate and HPT rotations have an obvious effect on the nanoindentation creep behaviors of the CoCrFeNiMn HEA. The creep behaviors of the as-cast and HPT-treated CoCrFeNiMn HEA may be controlled by dislocations and the collective effect of GB sliding and dislocations, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Improved High-Temperature Aluminum Alloys Containing Cerium

A common rare earth (cerium) when added to aluminum in compositions up to the eutectic compositions of around 10 wt.% improves the high-temperature performance of aluminum alloys. In the early 1980s, some promising research and development efforts focused on powder metallurgy revealed that aluminum alloys containing 4 wt.% cerium exhibit high-temperature mechanical properties exceeding those of the best commercial aluminum casting alloys then in production. Those compositions, which also included high levels of iron, were difficult to process. Recently, magnesium replaces iron to reduce density and improve processing. Cerium oxide is an abundant rare earth oxide that is often discarded during the refining of more valuable rare earths such as Nd and Dy. Therefore, the economics are compelling for cerium as an alloy additive. In this review, we report results obtained during an investigation of the processing and properties of aluminum-cerium alloys produced via casting, extrusion and additive manufacturing. The results show mechanical properties are retained at higher temperatures than other aluminum alloys and show complete recovery of mechanical properties at room temperature when exposed to elevated temperatures as high as 500 °C for 1000 h. Alloys containing cerium also have superior corrosion properties when compared to most aluminum alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Design of refractory high-entropy alloys

Here, this report presents a design methodology for refractory high-entropy alloys with a body-centered cubic (bcc) structure using select empirical parameters (i.e., enthalpy of mixing, atomic size difference, Ω-parameter, and electronegativity difference) and CALPHAD approach. Sixteen alloys in equimolar compositions ranging from quinary to ennead systems were designed with experimental verification studies performed on two alloys using x-ray diffraction, energy-dispersive spectroscopy, and scanning electron microscopy. Two bcc phases were identified in the as-cast HfMoNbTaTiVZr, whereas multiple phases formed in the as-cast HfMoNbTaTiVWZr. Observed elemental segregation in the alloys qualitatively agrees with CALPHAD prediction. Comparisons of the thermodynamic mixing properties for liquid and bcc phases using the Miedema model and CALPHAD are presented. This study demonstrates that CALPHAD is more effective in predicting HEA formation than empirical parameters, and new single bcc HEAs are suggested: HfMoNbTiZr, HfMoTaTiZr, NbTaTiVZr, HfMoNbTaTiZr, HfMoTaTiVZr, and MoNbTaTiVZr.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Isothermal and Cyclic Oxidation of Haynes 282 Processed by Electron Beam Melting (EBM) and Laser Powder Bed Fusion (LPBF) in Dry Air at 800 and 950°C

Here, the isothermal and cyclic oxidation behavior of Haynes 282 (H282) processed by laser powder bed fusion and electron beam melting was compared to its cast counterpart during exposures in air at 800 and 950°C. The specific microstructure of the AM alloys compared to coarse-grain cast 282 resulted in differences in oxidation rates, internal oxidation and spallation behavior. At 800°C, faster Ti diffusion to the surface due to the smaller grain size of the AM alloys led to Ti doping of the Cr 2 O 3 scale and faster oxidation rates. The higher density of grain boundaries also resulted in more pronounced internal oxidation. At 950°C, a duplex Cr 2 O 3 scale was observed with a dense inner layer and porous cracked outer layer with embedded TiO 2 particles. The impact of the external and internal oxide compositions and oxidation-induced elemental depletions on the oxidation lifetime, creep properties and spallation behavior is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes

Abstract FeCrAl alloys are a leading candidate material for accident tolerant fuel cladding due to their good performance in both normal light-water reactor operating conditions as well as their resilience to high-temperature accident scenarios. For commercial-scale production, new fabrication techniques need to be investigated. In this study, the effects of fabrication methods on the high-temperature steam oxidation performance of C26M (Fe12Cr6Al2Mo in wt.%) were investigated. Three variants of C26M were manufactured: wrought (cast and forged) (WC26M), powder metallurgy hot isostatic pressing (PMC26M), and laser powder bed fusion additive manufacturing (AMC26M). All three variants were exposed to steam at 1200°C for 2 h. Results showed no significant variation in mass change between the variants after steam exposure. All three variants effectively formed stable protective alumina films with ~0.6–1.3 µ m thickness. This study suggests FeCrAl alloys have excellent resilience to high-temperature steam in nuclear reactor accident scenarios regardless of the fabrication method.

Materials Science↗
DOE OSTI2022

Control of High-Temperature Static and Transient Thermomechanical Behavior of SiMo Ductile Iron by Al Alloying

Abstract Silicon and molybdenum ( SiMo ) ductile iron is commonly used for exhaust manifolds because these components experience thermal cycling in oxidizing environment, which requires resistance to fatigue during transient thermomechanical loads. Previous studies have demonstrated that alloying elements, such as Al , to SiMo ductile iron reduces the amount of surface degradation during static high-temperature exposure. However, deterioration of sphericity of the graphite nodules and a decrease in ductility could affect the tendency of cracking during thermal cycling. In this article, the effect of Al alloying on static and transient thermomechanical behavior of SiMo ductile iron was investigated to optimize the amount of Al alloying. A thermodynamic approach was used to confirm the effect of the Al alloying on the phase transformations in two SiMo cast irons, alloyed by 1.8% Al and 3% Al . These two alloys were cast in a laboratory along with the baseline SiMo ductile iron. Several experimental methods were used to evaluate the dimensional stability, physical properties, static oxidation, and failure resistance during constrained thermal cycling testing to compare their high-temperature capability. Experimental results verified that Al alloying increases the temperature range and decreases volume change during eutectoid transformation, which together with enhancement of oxidation protection improved the dimensional stability. Thermocycling tests showed that the number of cycles to failure depends on the amount of Al alloying and the applied high-temperature exposure during each cycle. SEM/EDX, high-resolution TEM and µCT analysis were used to verify the mechanism resulting from the Al alloying protection. It was shown that an optimal level of Al alloying for balancing oxidation and thermal cracking resistance depends on thermomechanical conditions of application.

36 MATERIALS SCIENCE↗
DOE OSTI2013

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

An equiatomic CoCrFeMnNi high-entropy alloy, which crystallizes in the face-centered cubic (FCC) crystal structure, was produced by arc melting and drop casting. The drop-cast ingots were homogenized, cold rolled, and recrystallized to obtain single-phase microstructures with three different grain sizes in the range 4~160 m. Quasi-static tensile tests were then performed at temperatures between 77 and 1073 K. Yield strength, ultimate tensile strength and ductility all increased with decreasing temperature. During the initial stages of plasticity (up to ~2% strain), deformation occurs by planar dislocation glide on the normal FCC slip system {111} 110 at all temperatures and grain sizes investigated. Undissociated 1/2 110 dislocations were observed, as were numerous stacking faults, which imply the dissociation of several of these dislocations into 1/6 112 Shockley partials. At later stages ( 20% strain), nanoscale deformation twins were observed after interrupted tests at 77 K, but not in specimens tested at room temperature where plasticity occurred exclusively by dislocations which organized into cells. Deformation twinning, by continually decreasing the mean free path of dislocations during tensile testing, produces a high degree of work hardening and a significant increase in the ultimate tensile strength. This increased work hardening prevents the early onset of necking instability and is a reason for the enhanced ductility observed at 77 K. A second way in which twinning can contribute to ductility is by providing an additional deformation mode to accommodate plasticity. However, it cannot explain the increase in yield strength with decreasing temperature in our high-entropy alloy since twinning was not observed in the early stages of plastic deformation. Since strong temperature dependencies of yield strength are also seen in binary FCC solid solution alloys, it may be an inherent solute effect, which needs further study.

Deformation twinning↗