Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

On the configuration of the polar cusps in earth's magnetosphere

The interaction between the solar wind and the earth's vacuum dipole field leads to the formation of a discontinuity called the magnetopause. In the standard picture, the magnetopause confines the magnetic field in such a manner that the polar cusp field lines originate from high latitudes in the dayside ionosphere and end at the two magnetic neutral points. Wu (1983, 1984) has questioned this standard picture of the polar cusp. MHD simulations indicate the existence of a current sheet above the polar cusp region, called 'the cusp current sheet' by Wu. Wu (1983) concluded that the difference between his cusp configuration and the standard picture is due to the fact that his geometry results from a plasma model, whereas the standard picture is based on a vacuum concept. In the present investigation, Wu's conclusion is questioned, and it is demonstrated that the standard cusp configuration is not restricted to the vacuum magnetosphere.

Voigt, G.-H.↗

Subionospheric VLF/LF phase perturbations produced by lightning-whistler induced particle precipitation

Rapid phase perturbations of subionospherically propagating VLF/LF signals are associated with lightning-generated whistlers which propagate in the magnetosphere. The perturbations, called 'Trimpi events' or 'Trimpi effects' after their discoverer, are attributed to alterations in the earth-ionosphere waveguide caused by localized enhancements in the ionospheric D region. These enhancements are produced by bursts of high-energy electrons which are precipitated out of the earth's radiation belts by the whistler waves. The present paper has the objective to present and discuss new evidence of whistler-associated phase perturbations of subionospheric signals. Events of this type, called phase Trimpi's were first reported by Lohrey and Kaiser (1979). Attention is given to occurrence statistics in terms of the seasonal distribution and hourly rate of events, possible effects on global VLF/LF navigation, and an interpretive model.

Inan, U. S.↗

lasants for transfer blackbody-pumped lasers

The concept of transfer blackbody-pumped lasers is outlined, recent research results concerning these lasers are presented and the search for new lasant materials for transfer blackbody-pumped lasers is expanded. There are two basic concepts for the blackbody-pumped transfer laser which are schematically drawn. The first concept is called the translational heating concept, an example being N2:CO2. Here the blackbody cavity is heated to approximately 2000 K by collected sunlight in space. An absorbing molecule would come in contact with the blackbody walls thus coming into equilibrium with the blackbody temperature. An alternative concept shown is called the vibrational heating transfer laser. Here the absorbing molecule is not translationally heated. Energy is coupled to the molecule only by optical absorption creating a high density of vibrational states. Thus the gas temperature is near room temperature whereas the vibrational temperature comes into equilibrium with the blackbody temperature.

Deyoung, R. J.↗

Interactive algebraic grid-generation technique

An algebraic grid generation technique and use of an associated interactive computer program are described. The technique, called the two boundary technique, is based on Hermite cubic interpolation between two fixed, nonintersecting boundaries. The boundaries are referred to as the bottom and top, and they are defined by two ordered sets of points. Left and right side boundaries which intersect the bottom and top boundaries may also be specified by two ordered sets of points. when side boundaries are specified, linear blending functions are used to conform interior interpolation to the side boundaries. Spacing between physical grid coordinates is determined as a function of boundary data and uniformly space computational coordinates. Control functions relating computational coordinates to parametric intermediate variables that affect the distance between grid points are embedded in the interpolation formulas. A versatile control function technique with smooth-cubic-spline functions is presented. The technique works best in an interactive graphics environment where computational displays and user responses are quickly exchanged. An interactive computer program based on the technique and called TBGG (two boundary grid generation) is also described.

Smith, R. E.↗

Comparison of theoretical and flight-measured local flow aerodynamics for a low-aspect-ratio fin

Flight test and theoretical aerodynamic data were obtained for a flight test fixture mounted on the underside of an F-104G aircraft. The theoretical data were generated using two codes, a two dimensional transonic code called Code H, and a three dimensional subsonic and supersonic code call wing-body. Pressure distributions generated by the codes for the flight test fixture as well as boundary layer displacement thickness generated by the two dimensional code were compared to the flight test data. The two dimensional code pressure distributions compared well except at the minimum pressure point and trailing edge. Shock locations compared well except at high transonic speeds. The three dimensional code pressure distributions compared well except at the trailing edge of the flight test fixture. The two dimensional code does not predict displacement thickness of the flight test fixture well.

Johnson, J. B.↗

Tests with three-dimensional adjustments in the rectangular working section of the French T2 wind tunnel with an AS 07-type swept-back wing model

The results obtained on the AS 07 wing and the working section walls for three types of configurations are reported. The first, called non-adapted, corresponds to the divergent upper and lower rectilinear walls which compensate for limit layer thickening. It can serve as a basis for complete flow calculations. The second configuration corresponds to wall shapes determined from calculations which tend to minimize interference at the level of the fuselage. Finally, the third configuration, called two-dimensional adaptation, uses the standard method for T2 profile tests. This case was tested to determine the influence of wall shape and error magnitude. These results are not sufficient to validate the three-dimensional adaptation; they must be coordinated with calculations or with unlimited atmosphere tests.

Blanchard, A.↗

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three-dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗

The force on the flex: Global parallelism and portability

A parallel programming methodology, called the force, supports the construction of programs to be executed in parallel by an unspecified, but potentially large, number of processes. The methodology was originally developed on a pipelined, shared memory multiprocessor, the Denelcor HEP, and embodies the primitive operations of the force in a set of macros which expand into multiprocessor Fortran code. A small set of primitives is sufficient to write large parallel programs, and the system has been used to produce 10,000 line programs in computational fluid dynamics. The level of complexity of the force primitives is intermediate. It is high enough to mask detailed architectural differences between multiprocessors but low enough to give the user control over performance. The system is being ported to a medium scale multiprocessor, the Flex/32, which is a 20 processor system with a mixture of shared and local memory. Memory organization and the type of processor synchronization supported by the hardware on the two machines lead to some differences in efficient implementations of the force primitives, but the user interface remains the same. An initial implementation was done by retargeting the macros to Flexible Computer Corporation's ConCurrent C language. Subsequently, the macros were caused to directly produce the system calls which form the basis for ConCurrent C. The implementation of the Fortran based system is in step with Flexible Computer Corporations's implementation of a Fortran system in the parallel environment.

Jordan, H. F.↗

Existence and stability, and discrete BB and rank conditions, for general mixed-hybrid finite elements in elasticity

In this paper, all possible forms of mixed-hybrid finite element methods that are based on multi-field variational principles are examined as to the conditions for existence, stability, and uniqueness of their solutions. The reasons as to why certain 'simplified hybrid-mixed methods' in general, and the so-called 'simplified hybrid-displacement method' in particular (based on the so-called simplified variational principles), become unstable, are discussed. A comprehensive discussion of the 'discrete' BB-conditions, and the rank conditions, of the matrices arising in mixed-hybrid methods, is given. Some recent studies aimed at the assurance of such rank conditions, and the related problem of the avoidance of spurious kinematic modes, are presented.

Xue, W.-M.↗

Comparison of theoretical and flight-measured local flow aerodynamics for a low-aspect-ratio fin

Flight test and theoretical aerodynamic data were obtained for a flight test fixture mounted on the underside of an F-104G aircraft. The theoretical data were generated using two codes: a two-dimensional transonic code called code H, and a three-dimensional subsonic and supersonic code called wing-body. Pressure distributions generated by the codes for the flight test fixture, as well as compared with the flight-measured data. The two-dimensional code pressure distributions compared well except at the minimum pressure point and the trailing edge. Shock locations compared well except at high transonic speeds. However, the two-dimensional code did not adequately predict the displacement thickness of the flight test fixture. The three-dimensional code pressure distributions compared well except at the trailing edge of the flight test fixture.

Johnson, J. Blair↗

Science and technology issues in spacecraft fire safety

The space station, a permanently-inhabited orbiting laboratory, places new demands on spacecraft fire safety. Long-duration missions may call for more-constrained fire controls, but the accessibility of the space station to a variety of users may call for less-restrictive measures. This paper discusses fire safety issues through a review of the state of the art and a presentation of key findings from a recent NASA Lewis Research Center Workshop. The subjects covered are the fundamental science of low-gravity combustion and the technology advances in fire detection, extinguishment, materials assessment, and atmosphere selection. Key concerns are for the adoption of a fire-safe atmosphere and the substitution for the effective but toxic extinguishant, halon 1301. The fire safety studies and reviews provide several recommendations for further action. One is the expanded research in combustion, sensors, and materials in the low-gravity environment of space. Another is the development of generalized fire-safety standards for spacecraft through cooperative endeavors with aerospace and outside Government and industry sources.

Friedman, Robert↗

Optimization methods and silicon solar cell numerical models

The goal of this project is the development of an optimization algorithm for use with a solar cell model. It is possible to simultaneously vary design variables such as impurity concentrations, front junction depth, back junctions depth, and cell thickness to maximize the predicted cell efficiency. An optimization algorithm has been developed and interfaced with the Solar Cell Analysis Program in 1 Dimension (SCAPID). SCAPID uses finite difference methods to solve the differential equations which, along with several relations from the physics of semiconductors, describe mathematically the operation of a solar cell. A major obstacle is that the numerical methods used in SCAPID require a significant amount of computer time, and during an optimization the model is called iteratively until the design variables converge to the value associated with the maximum efficiency. This problem has been alleviated by designing an optimization code specifically for use with numerically intensive simulations, to reduce the number of times the efficiency has to be calculated to achieve convergence to the optimal solution. Adapting SCAPID so that it could be called iteratively by the optimization code provided another means of reducing the cpu time required to complete an optimization. Instead of calculating the entire I-V curve, as is usually done in SCAPID, only the efficiency is calculated (maximum power voltage and current) and the solution from previous calculations is used to initiate the next solution.

Girardini, K.↗

Surface infrastructure functions, requirements and subsystems for a manned Mars mission

Planning and development for a permanently manned scientific outpost on Mars requires an in-depth understanding and analysis of the functions the outpost is expected to perform. The optimum configuration that accomplishes these functions then arises during the trade studies process. In a project this complex, it becomes necessary to use a formal methodology to document the design and planning process. The method chosen for this study is called top-down functional decomposition. This method is used to determine the functions that are needed to accomplish the overall mission, then determine what requirements and systems are needed to do each of the functions. This method facilitates automation of the trades and options process. In the example, this was done with an off-the shelf software package called TK! olver. The basic functions that a permanently manned outpost on Mars must accomplish are: (1) Establish the Life Critical Systems; (2) Support Planetary Sciences and Exploration; and (3) Develop and Maintain Long-term Support Functions, including those systems needed towards self-sufficiency. The top-down functional decomposition methology, combined with standard spread sheet software, offers a powerful tool to quickly assess various design trades and analyze options. As the specific subsystems, and the relational rule algorithms are further refined, it will be possible to very accurately determine the implications of continually evolving mission requirements.

Kyle Fairchild↗

Ascent/descent ancillary data production user's guide

The Ascent/Descent Ancillary Data Product, also called the A/D BET because it contains a Best Estimate of the Trajectory (BET), is a collection of trajectory, attitude, and atmospheric related parameters computed for the ascent and descent phases of each Shuttle Mission. These computations are executed shortly after the event in a post-flight environment. A collection of several routines including some stand-alone routines constitute what is called the Ascent/Descent Ancillary Data Production Program. A User's Guide for that program is given. It is intended to provide the reader with all the information necessary to generate an Ascent or a Descent Ancillary Data Product. It includes descriptions of the input data and output data for each routine, and contains explicit instructions on how to run each routine. A description of the final output product is given.

Brans, H. R.↗

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗

Cockpit Resource Management (CRM) for FAR Parts 91 and 135 operators

The why, what, and how of CRM at Flight Safety International (FSI)--that is, the philosophy behind the program, the content of the program, and some insight regarding how it delivers that to the pilot is presented. A few of the concepts that are part of the program are discussed. This includes a view of statistics called the Safety Window, the concept of situational awareness, and an approach to training that we called the Cockpit Management Concept (CMC).

Schwartz, Douglas↗

NESSUS/expert and NESSUS/FPI in the Probabilistic Structural Analysis Methods (PSAM) program

The Numerical Evaluation of Stochastic Structures under Stress (NESSUS) is the primary computer code being developed in the NASA Probabilistic Structural Analysis Methods (PSAM) project. It consists of four modules NESSUS/EXPERT, NESSUS/FPI, NESSUS/PRE and NESSUS/FEM. This presentation concentrates on EXPERT and FPI. To provide an effective interface between NESSUS and the user, an expert system module called NESSUS/EXPERT is being developed. That system uses the CLIPS artificial intelligence code developed to NASA-JSC. The code is compatible with FORTRAN, the standard language for codes in PSAM. The user interacts with the CLIPS inference engine, which is linked to the knowledge database. The perturbation database generated by NESSUS/FEM and managed in EXPERT is used to develop the so-called response or performance model in the random variables. Two independent probabilistic methods are available in PSAM for the computation of the probabilistic structural response. These are the Fast Probability Integration (FPI) method and Monte Carlo simulation. FPI is classified as an advanced reliability method and has been developed over the past ten years by researchers addressing the reliability of civil engineering structures. Monte Carlo is a well-established technique for computing probabilities by conducting a number of deterministic analyses with specified input distributional information.

Burnside, O. H.↗

Potential medical applications of TAE

In cooperation with scientists in the University of Washington Medical School, a microcomputer-based image processing system for quantitative microscopy, called DMD1 (Digital Microdensitometer 1) was constructed. In order to make DMD1 transportable to different hosts and image processors, we have been investigating the possibility of rewriting the lower level portions of DMD1 software using Transportable Applications Executive (TAE) libraries and subsystems. If successful, we hope to produce a newer version of DMD1, called DMD2, running on an IBM PC/AT under the SCO XENIX System 5 operating system, using any of seven target image processors available in our laboratory. Following this implementation, copies of the system will be transferred to other laboratories with biomedical imaging applications. By integrating those applications into DMD2, we hope to eventually expand our system into a low-cost general purpose biomedical imaging workstation. This workstation will be useful not only as a self-contained instrument for clinical or research applications, but also as part of a large scale Digital Imaging Network and Picture Archiving and Communication System, (DIN/PACS). Widespread application of these TAE-based image processing and analysis systems should facilitate software exchange and scientific cooperation not only within the medical community, but between the medical and remote sensing communities as well.

Fahy, J. Ben↗