Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Spin resonance strength calculation through single particle tracking for RHIC

The strengths of spin resonances for the polarized-proton operation in the Relativistic Heavy Ion Collider are currently calculated with the code DEPOL, which numerically integrates through the ring based on an analytical approximate formula. In this article, we test a new way to calculate the spin resonance strengths by performing Fourier transformation to the actual transverse magnetic fields seen by a single particle traveling through the ring. Comparison of calculated spin resonance strengths is made between this method and DEPOL.

43 PARTICLE ACCELERATORS↗

Online Airtightness Calculator for the US, Canada and China

The contribution of air leakage to heating and cooling loads has been increasing as the thermal resistance of building envelopes continues to improve. Easy-to-access data are needed to convince building owners and contractors that enhancing the airtightness of buildings is the next logical step to achieve a high-performance building envelope. To this end, Oak Ridge National Laboratory, the National Institute of Standards and Technology, the Air Barrier Association of America, and the US-China Clean Energy Research Center for Building Energy Efficiency Consortium partnered to develop an online calculator that estimates the potential energy savings in major US, Canadian, and Chinese cities due to improvements in airtightness. This tool will have user-friendly graphical interface that uses a database of CONTAM-EnergyPlus pre-run simulation results, and will be available to the public at no cost. Baseline leakage rates are either user-specified or the user selects them from the supplied typical leakage rates. Users will enter the expected airtightness after the proper installation of an air barrier system. Energy costs are estimated based on the building location and inputs from users. This paper provides an overview of the methodology that is followed in this calculator, as well as results from an example. The successful deployment of this calculator could influence construction practices so that greenhouse gas emissions from the US, Canada, and China are significantly curtailed.

air leakage↗

Monte Carlo interpretation of the AMMON/REF experiment in EOLE for the JHR reactor calculations

A new experiment, named AMMON and dedicated to the analysis of the JHR neutron physics and to the qualification of the associated neutron calculation tools, is currently in progress in the EOLE zero-power experimental reactor at CEA Cadarache. The first core configuration, so called 'reference configuration' (AMMON/REF) has already been loaded: it consists of an experimental zone of 7 JHR assemblies with U{sub 3}Si{sub 2} 27% {sup 235}U enriched fuel curved plates surrounded by a driver zone with 623 standard PWR UOx fuel pins. The analysis of the AMMON/REF measurements is presented in this paper. It is based on calculations performed with the 3-dimensional reference Monte Carlo TRIPOLI4.7 code and the JEFF3.1.1 European library: it highlights a good agreement between calculation and experiment concerning reactivity and power distribution in the experimental zone. Reactivity prediction is very satisfactory, despite the presence of a large aluminum quantity in the core: C-E=+ 376 pcm {+-} 290. The radial and axial plate power profiles are also in good agreement. Assembly power distribution is predicted within the experimental uncertainties (1{sigma}). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Equilibrium cycle pin by pin transport depletion calculations with DeCART

As the Advanced Fuel Cycle Initiative (AFCI) program has matured it has become more important to utilize more advanced simulation methods. The work reported here was performed as part of the AFCI fellowship program to develop and demonstrate the capability of performing high fidelity equilibrium cycle calculations. As part of the work here, a new multi-cycle analysis capability was implemented in the DeCART code which included modifying the depletion modules to perform nuclide decay calculations, implementing an assembly shuffling pattern description, and modifying iteration schemes. During the work, stability issues were uncovered with respect to converging simultaneously the neutron flux, isotopics, and fluid density and temperature distributions in 3-D. Relaxation factors were implemented which considerably improved the stability of the convergence. To demonstrate the capability two core designs were utilized, a reference UOX core and a CORAIL core. Full core equilibrium cycle calculations were performed on both cores and the discharge isotopics were compared. From this comparison it was noted that the improved modeling capability was not drastically different in its prediction of the discharge isotopics when compared to 2-D single assembly or 2-D core models. For fissile isotopes such as U-235, Pu-239, and Pu-241 the relative differences were 1.91%, 1.88%, and 0.59%), respectively. While this difference may not seem large it translates to mass differences on the order of tens of grams per assembly, which may be significant for the purposes of accounting of special nuclear material. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a neutronics calculation method for designing commercial type Japanese sodium-cooled fast reactor

Under the R and D project to improve the modeling accuracy for the design of fast breeder reactors the authors are developing a neutronics calculation method for designing a large commercial type sodium- cooled fast reactor. The calculation method is established by taking into account the special features of the reactor such as the use of annular fuel pellet, inner duct tube in large fuel assemblies, large core. The Verification and Validation, and Uncertainty Qualification (V and V and UQ) of the calculation method is being performed by using measured data from the prototype FBR Monju. The results of this project will be used in the design and analysis of the commercial type demonstration FBR, known as the Japanese Sodium fast Reactor (JSFR). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Neutron noise calculations in a hexagonal geometry and comparison with analytical solutions

This paper presents the development of a neutronic and kinetic solver for hexagonal geometries. The tool is developed based on the diffusion theory with multi-energy groups and multi-groups of delayed neutron precursors allowing the solutions of forward and adjoint problems of static and dynamic states, and is applicable to both thermal and fast systems with hexagonal geometries. In the dynamic problems, the small stationary fluctuations of macroscopic cross sections are considered as noise sources, and then the induced first order noise is calculated fully in the frequency domain. Numerical algorithms for solving the static and noise equations are implemented with a spatial discretization based on finite differences and a power iterative solution. A coarse mesh finite difference method has been adopted for speeding up the convergence. Since no other numerical tool could calculate frequency-dependent noise in hexagonal geometry, validation calculations have been performed and benchmarked to analytical solutions based on a 2-D homogeneous system with two-energy groups and one-group of delayed neutron precursor, in which point-like perturbations of thermal absorption cross section at central and non-central positions are considered as noise sources. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CATHARE calculations of Phenix ultimate natural convection test

The Phenix Sodium cooled Fast Reactor (SFR) started operation in 1973 and it was stopped in 2009. Before the reactor was definitively shutdown, in order to collect experimental data for code assessments in the frame of Generation IV an intensive program of ultimate tests was set up. Among these ultimate experiments, two thermal hydraulic tests were performed: an asymmetrical test consisting in a trip on one secondary pump and a natural convection test in the primary circuit. The natural convection test has been used for an international benchmark on system codes in the frame of the IAEA. The CATHARE code - initially developed for water cooled reactors and now extended for safety analyses for other kinds of reactors, including Sodium Fast Reactor - was used by CEA for this benchmark. The paper reminds briefly the Phenix reactor with the main physical parameters and the instrumentation used during the natural convection test. Main test results are also briefly reminded including the evolution of the core and the heat exchangers inlet and outlet temperatures, and some local temperature measurements. The main developments to perform CATHARE SFR computations and the strategy of system code assessment are presented. Then the CATHARE modelling of Phenix reactor is depicted and the various assumptions are pointed out. CATHARE encountered no problem to predict the initial nominal state. Afterwards, the whole transient scenario is calculated and CATHARE calculations are compared to the Phenix measurements. The global trend is rather well predicted by the CATHARE code. Nevertheless, due to complex flow phenomena occurring in large plena and components, the system code encountered physical limitations, leading to remaining discrepancies between code prediction and plant data. Various sensitivity calculations are presented and they bring partial answers. Additional analyses are in progress to understand more deeply the complex 3D phenomena involved during the different phases of the natural convection test. Additional work for coupling CATHARE system code and TRIO-U CFD code is in progress and will bring useful information to better understand the physical phenomena involved during the natural convection test and to improve system modeling for future SFR safety analysis. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Examination of temperature dependent subgroup formulations in direct whole core transport calculation for power reactors

The traditional subgroup method which has been applied for lattice transport calculations has an inherent limitation for non-uniform temperature distributions. As a measure to incorporate temperature dependence into the subgroup formulation, the subgroup level and number density adjustment method have been proposed. In this paper, the temperature dependent subgroup formulations employed for reflecting the non-uniform temperature effects on the resonance spatial self-shielding are examined for the whole core transport calculation with the thermal feedback. For 2D pin-cell problem with non-uniform temperature profiles, the inherent limitation of conventional subgroup method is confirmed. And the improvement in terms of reactivity is observed with the proposed adjustment scheme. For the real PWR core calculation with thermal feedback in the hot-full-power condition, the noticeable correction for the fuel temperature coefficient by about 10% more negative is obtained with the correction schemes. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Calculation of natural convection test at Phenix using the NETFLOW++ code

The present paper describes modeling and analyses of a natural convection of the pool-type fast breeder reactor Phenix. The natural convection test was carried out as one of the End of Life Tests of the Phenix. Objective of the present study is to assess the applicability of the NETFLOW++ code which has been verified thus far using various water facilities and validated using the plant data of the loop-type FBR 'Monju' and the loop-type experimental fast reactor 'Joyo'. The Phenix primary heat transport system is modeled based on the benchmark documents available from IAEA. The calculational model consists of only the primary heat transport system with boundary conditions on the secondary-side of IHX. The coolant temperature at the primary pump inlet, the primary coolant temperature at the IHX inlet and outlet, the secondary coolant temperatures and other parameters are calculated by the code where the heat transfer between the hot and cold pools is explicitly taken into account. A model including the secondary and tertiary systems was prepared, and the calculated results also agree well with the measured data in general. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Core follow calculation with the nTRACER numerical reactor and verification using power reactor measurement data

The nTRACER direct whole core transport code employing the planar MOC solution based 3-D calculation method, the subgroup method for resonance treatment, the Krylov matrix exponential method for depletion, and a subchannel thermal/hydraulic calculation solver was developed for practical high-fidelity simulation of power reactors. Its accuracy and performance is verified by comparing with the measurement data obtained for three pressurized water reactor cores. It is demonstrated that accurate and detailed multi-physic simulation of power reactors is practically realizable without any prior calculations or adjustments. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Continuous-energy eigenvalue sensitivity coefficient calculations in TSUNAMI-3D

Two methods for calculating eigenvalue sensitivity coefficients in continuous-energy Monte Carlo applications were implemented in the KENO code within the SCALE code package. The methods were used to calculate sensitivity coefficients for several test problems and produced sensitivity coefficients that agreed well with both reference sensitivities and multigroup TSUNAMI-3D sensitivity coefficients. The newly developed CLUTCH method was observed to produce sensitivity coefficients with high figures of merit and a low memory footprint, and both continuous-energy sensitivity methods met or exceeded the accuracy of the multigroup TSUNAMI-3D calculations. (authors)

97 MATHEMATICS AND COMPUTING↗

US EPA superfund radon vapor intrusion preliminary remediation goal (RAD-VIPRG) electronic calculator - 15349

Currently, there is no U.S. EPA guidance on correlating soil or groundwater levels of radon with indoor radon concentrations at Superfund sites. EPA is developing the Radon Vapor Intrusion Preliminary Remediation Goal (RAD-VIPRG) Calculator which is a spreadsheet tool that (1) lists two radon isotopes (Rn-220 and Rn-222) known to pose a potential cancer risk through the inhalation pathway; (2) provides generally recommended risk and Applicable or Relevant and Appropriate Requirements (ARAR) based preliminary remediation goals (PRG) for groundwater, soil gas (exterior to buildings and sub-slab) and indoor air for default target risk and ARAR based levels and exposure scenarios; and (3) allows calculation of site-specific PRGs based on user-defined target risk and ARAR levels and exposure scenarios. EPA developed the RAD-VIPRG calculator to help risk assessors, remedial project managers, and others involved with risk assessment and decision making at radioactively contaminated sites.(authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Calculation of Higher Eigenpairs of the Transport Equation Using IRAM Based on Domain Decomposition

The higher eigenpairs of the neutron transport (or diffusion) equation are useful in core flux distribution reconstruction, transient analysis, stability analysis, and loading pattern optimization. There are various methods for the calculation of higher eigenpairs, such as the power iteration method with filtering technique, the Generalized Modified Power Method (GMPM), the power iteration method with innovative boundary conditions for symmetric cores, and Krylov subspace methods. In regard to Krylov subspace methods, the Implicitly Restarted Arnoldi Method (IRAM) and ORTHOMIN were implemented to calculate higher eigenpairs for both transport and diffusion equations. In Warsa's work, however, there was a significant drawback that problems with energy upscatter could not be treated efficiently. In Modak's work, the mode to which his method was likely to converge depended on the shape of initial guess flux, and only one mode could be computed each time, making it impractical for real use. Furthermore, the computational burden for higher eigenpairs is generally much larger than for only the first eigenpair, especially for neutron transport equations. Therefore, the implementation of parallel computation for higher eigenpairs is essential to improve the efficiency, and no such work has been reported in literature so far. In this summary, we propose an innovative method to calculate higher eigenpairs of the neutron transport equation based on high performance computation. In this method, 2D Matrix Method of Characteristic (MMOC) is used to discretize the neutron transport equation; IRAM is used to evaluate higher eigenpairs; spatial domain decomposition is used to realize parallel computation. The highlight of this method is using the MGMD PGMRES (Multi-Group and Multi-Domain coupled Parallel Generalized Minimal Residual Method) algorithm to simultaneously accelerate the upscatter iterations and the inner interface angular fluxes iterations, avoiding the drawback in Warsa's method and the efficiency problem of conventional Jacobi iteration. To the best of our knowledge, our work represents the first application of IRAM based on domain decomposition for higher eigenpairs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First‐Principles Calculations of Quantum Efficiency for Point Defects in Semiconductors: The Example of Yellow Luminance by GaN: C N +O N and GaN:C N

Abstract Point defects play an important role in the photoelectrical properties of semiconductor materials, and they can be luminescence centers. However, the relationships among the observed luminescence wavelengths, intensities, and the microscopic processes are in most cases unknown, or depend heavily on parameter fitting. In this work, the light‐emitting quantum efficiencies for point defects using ab initio density functional theory are calculated. The study of radiation recombination for electrons and nonradiation recombination for holes is reported here. The results show that the defect C N transition between “−” and “0” charged levels and the defect C N +O N transition between “0” and “+” charged levels both may be responsible for the yellow luminescence (YL) which is observed in experiment. Moreover, the calculation shows significant thermal quenching of the YL starting at 480 K due to re‐excitation of hole into the valence band from the point defects, which is in relatively good agreement with the experimentally observed value. This work shows that it is possible to use ab initio calculations to understand the microscopic mechanisms and the competitions among different channels for the light emissions caused by defects.

Zhang, Hai‐Shan↗

Large Charge‐Transfer Energy in LiFePO 4 Revealed by Full‐Multiplet Calculation for the Fe L 3 ‐edge Soft X‐ray Emission Spectra

Abstract We analyzed the Fe 3d electronic structure in LiFePO 4 /FePO 4 (LFP/FP) nanowire with a high cyclability by using soft X‐ray emission spectroscopy (XES) combined with configuration‐interaction full‐multiplet (CIFM) calculation. The ex situ Fe L 2,3 ‐edge resonant XES (RXES) spectra for LFP and FP are ascribed to oxidation states of Fe 2+ and Fe 3+ , respectively. CIFM calculations for Fe 2+ and Fe 3+ states reproduced the Fe L 3 RXES spectra for LFP and FP, respectively. In the calculations for both states, the charge‐transfer energy was considerably larger than those for typical iron oxides, indicating very little electron transfer from the O 2p to Fe 3d orbitals and a weak hybridization on the Fe−O bond during the charge–discharge reactions.

Asakura, Daisuke↗

Web servers and services for electrostatics calculations with APBS and PDB2PQR

APBS and PDB2PQR are widely utilized free software packages for biomolecular electrostatics calculations. Using the Opal toolkit, we have developed a web services framework for these software packages that enables the use of APBS and PDB2PQR by users who do not have local access to the necessary amount of computational capabilities. This not only increases accessibility of the software to a wider range of scientists, educators, and students but it also increases the availability of electrostatics calculations on portable computing platforms. Users can access this new functionality in two ways. First, an Opal-enabled version of APBS is provided in current distributions, available freely on the web. Second, we have extended the PDB2PQR web server to provide an interface for the setup, execution, and visualization electrostatics potentials as calculated by APBS. This web interface also uses the Opal framework which ensures the scalability needed to support the large APBS user community. Both of these resources are available from the APBS/PDB2PQR website: http://www.poissonboltzmann.org/.

99 GENERAL AND MISCELLANEOUS↗

Calculating Standard Reduction Potentials of [4Fe–4S] Proteins

The oxidation–reduction potentials of electron transfer proteins determine the driving forces for their electron transfer reactions. Although the type of redox site determines the intrinsic energy required to add or remove an electron, the electrostatic interaction energy between the redox site and its surrounding environment can greatly shift the redox potentials. Here, a method for calculating the reduction potential versus the standard hydrogen electrode, E°, of a metalloprotein using a combinatio of density functional theory and continuum electrostatics is presented. This work focuses on the methodology for the continuum electrostatics calculations, including various factors that may affect the accuracy. The calculations are demonstrated using crystal structures of six homologous HiPIPs, which give E° that are in excellent agreement with experimental results.

Environmental Molecular Sciences Laboratory↗

Double-buffered, heterogeneous CPU + GPU integral digestion algorithm for single-excitation calculations involving a large number of excited states

The most widely used quantum-chemical models for excited states are single-excitation theories, a category that includes configuration interaction with single substitutions, time-dependent density functional theory, and also a recently developed ab initio exciton model. When a large number of excited states are desired, these calculations incur a significant bottleneck in the “digestion” step in which two-electron integrals are contracted with density or density-like matrices. We present an implementation that moves this step onto graphical processing units (GPUs), and introduce a double-buffer scheme that minimizes latency by computing integrals on the central processing units (CPUs) concurrently with their digestion on the GPUs. An automatic code generation scheme simplifies the implementation of high-performance GPU kernels. For the exciton model, which requires separate excited-state calculations on each electronically coupled chromophore, the heterogeneous implementation described here results in speedups of 2–6× versus a CPU-only implementation. For traditional time-dependent density functional theory calculations, we obtain speedups of up to 5× when a large number of excited states is computed.

97 MATHEMATICS AND COMPUTING↗