Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BACKSCATTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Multiple-Wave Diffraction in High Energy Resolution Back-Reflecting X-Ray Optics

We have studied the effects of multiple-wave diffraction in a novel optical scheme recently published by Shvyd'ko et al. utilizing Bragg diffraction of x rays in backscattering geometry from asymmetrically cut crystals for achieving energy resolutions beyond the intrinsic width of the Bragg reflection. By numerical simulations based on dynamic x-ray diffraction and by experimentation involving two-dimensional angular scans of the back-reflecting crystal, multiple-wave diffraction was found to contribute up to several tens percent loss of efficiency but can be avoided without degrading the energy resolution of the original scheme by careful choice of azimuthal orientation of the diffracting crystal surface and by tilting of the crystal perpendicular to the dispersion plane.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sintered Cr/Pt and Ni/Au ohmic contacts to B{sub 12}P{sub 2}

Icosahedral boron phosphide (B{sub 12}P{sub 2}) is a wide-bandgap semiconductor possessing interesting properties such as high hardness, chemical inertness, and the reported ability to self-heal from irradiation by high energy electrons. Here, the authors developed Cr/Pt and Ni/Au ohmic contacts to epitaxially grown B{sub 12}P{sub 2} for materials characterization and electronic device development. Cr/Pt contacts became ohmic after annealing at 700 °C for 30 s with a specific contact resistance of 2 × 10{sup −4} Ω cm{sup 2}, as measured by the linear transfer length method. Ni/Au contacts were ohmic prior to any annealing, and their minimum specific contact resistance was ∼l–4 × 10{sup −4} Ω cm{sup 2} after annealing over the temperature range of 500–800 °C. Rutherford backscattering spectrometry revealed a strong reaction and intermixing between Cr/Pt and B{sub 12}P{sub 2} at 700 °C and a reaction layer between Ni and B{sub 12}P{sub 2} thinner than ∼25 nm at 500 °C.

36 MATERIALS SCIENCE↗

Atomic layer deposition of 2D and 3D standards for synchrotron-based quantitative composition and structure analysis methods

Atomic layer deposition (ALD) is a scalable deposition technique known for producing uniform, conformal films of a wide range of compounds on nearly any substrate material. These traits make it an ideal deposition method for producing films to replace the National Institute of Standards and Technology (NIST) standards and create Standard Reference Materials (SRMs) on a wide range of relevant two-dimensional and three-dimensional substrates. The use of SRM from NIST for quantitative analysis of chemical composition using synchrotron based x-ray fluorescence (SR-XRF) and scanning transmission x-ray microscopy (STXM) is common. Such standards, however, can suffer from inhomogeneity in chemical composition and thickness and often require further calculations, based on sample mounting and detector geometry, to obtain quantitative results. These inhomogeneities negatively impact the reproducibility of the measurements and the quantitative measure itself. Utilizing Rutherford backscattering, x-ray reflectivity, quartz crystal microbalance, STXM, and SR-XRF, the authors show that ALD is capable of producing high quality standards that are homogenous over scales ranging from nanometers to 100s of micrometers.

Becker, Nicholas G.↗

SU-F-J-12: Dosimetrical Characteristics of a 2.5 MV Megavoltage Photon Beam

Purpose: To evaluate the accuracy of modeling scatter factor (SF) and primary off-axis ratio (POAR) for 2.5 MV megavoltage photon beams using an empirical model, which can be used as a dose calculation model for low energy EPID imaging. Methods: Scatter photon parameters were calculated for 2.5 MV photon beam from a Varian TrueBeam by fitting the product of depth dose, PDD, and the phantom scatter factor, Sp, for a range of square field sizes between 2 and 40 cm and depths between 0 and 30 cm. The model is then applied to off-axis profiles measured for a slit field (3cm ×35 cm) for 5 depths: 0.6, 5, 10, and 20, 30 cm. Primary off-axis ratio (POAR) values were determined based on the fitting to data using the empirical model. Results: The fitting to PDD*Sp has a maximum error of 14%, mostly near surface, where backscattering of photons dominate and has a standard deviation of 4.7%. The attenuation coefficient and beam-hardening coefficient of the beam is determined to be 0.095 1/cm and 0.0038 1/cm, respectively. POAR for 2.5 MV has a peak in the center, corresponding to a beam without sufficient material to flatten the beam. Conclusion: This work illustrates a deficiency of the current empirical model to fit SF for a 2.5 MV photon beams. Most of the errors are near the surface region and an improved model that incorporate better modeling of backscattering can be developed to improve the model accuracy.

60 APPLIED LIFE SCIENCES↗

Influence of the Charge State of Xenon Ions on the Depth Distribution Profile Upon Implantation into Silicon

Experimental depth distributions of the concentration of implanted xenon ions depending on their charge state and irradiation energy are presented. Xenon ions in charge states q = 1–20 and energies in the range from 50 to 400 keV are incorporated into single-crystal silicon. Irradiation is performed in the direction not coinciding with the crystallographic axes of the crystal to avoid the channeling effect. The ion fluence varies in the range of 5 × (10{sup 14}–10{sup 15}) ion/cm{sup 2}. The irradiation by singly charged ions and investigation of the samples by Rutherford backscattering spectroscopy is performed using an HVEE acceleration complex at Moscow State University. Multiply charged ions are implanted using a FAMA acceleration complex at the Vinća Institute of Nuclear Sciences. The depth distribution profiles of the incorporated ions are found using Rutherford backscattering spectroscopy. Experimental results are correlated with computer calculations. It is shown that the average projective path of multiply charged ions in most cases is shorter when compared with the average projected path of singly charged ions and the results of computer modeling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved sensitivity gas detection by spontaneous Raman scattering

Accurate, real-time measurement of the dilute constituents of a gaseous mixture poses a significant challenge usually relegated to mass spectrometry. Here, spontaneous Raman backscattering is used to detect low pressure molecular gases. Rapid detection of gases in the 100 parts in 106 ðppmÞ range is described. Improved sensitivity is brought about by use of a hollow-core, photonic bandgap fiber gas cell in the backscattering configuration to increase collection efficiency and an image-plane aperture to greatly reduce silica-Raman background noise. Spatial and spectral properties of the silica noise were examined with a two-dimensional CCD detector array

99 GENERAL AND MISCELLANEOUS↗

Characterizing Aerosol Distributions and Optical Properties Using the NASA Langley High Spectral Resolution Lidar

The objective of this project was to provide vertically and horizontally resolved data on aerosol optical properties to assess and ultimately improve how models represent these aerosol properties and their impacts on atmospheric radiation. The approach was to deploy the NASA Langley Airborne High Spectral Resolution Lidar (HSRL) and other synergistic remote sensors on DOE Atmospheric Science Research (ASR) sponsored airborne field campaigns and synergistic field campaigns sponsored by other agencies to remotely measure aerosol backscattering, extinction, and optical thickness profiles. Synergistic sensors included a nadir-viewing digital camera for context imagery, and, later in the project, the NASA Goddard Institute for Space Studies (GISS) Research Scanning Polarimeter (RSP). The information from the remote sensing instruments was used to map the horizontal and vertical distribution of aerosol properties and type. The retrieved lidar parameters include profiles of aerosol extinction, backscatter, depolarization, and optical depth. Products produced in subsequent analyses included aerosol mixed layer height, aerosol type, and the partition of aerosol optical depth by type. The lidar products provided vertical context for in situ and remote sensing measurements from other airborne and ground-based platforms employed in the field campaigns and was used to assess the predictions of transport models. Also, the measurements provide a data base for future evaluation of techniques to combine active (lidar) and passive (polarimeter) measurements in advanced retrieval schemes to remotely characterize aerosol microphysical properties. The project was initiated as a 3-year project starting 1 January 2005. It was later awarded continuation funding for another 3 years (i.e., through 31 December 2010) followed by a 1-year no-cost extension (through 31 December 2011). This project supported logistical and flight costs of the NASA sensors on a dedicated aircraft, the subsequent analysis and archival of the data, and the presentation of results in conferences, workshops, and publications. DOE ASR field campaigns supported under this project included: • MAX-Mex /MILAGRO (2006), • TexAQS 2006/GoMACCS (2006), • CHAPS (2007), • RACORO (2009), and • CARE/CalNex (2010). In addition, data acquired on HSRL airborne field campaigns sponsored by other agencies were used extensively to fulfill the science objectives of this project and the data acquired have been made available to other DOE ASR investigators upon request.

99 GENERAL AND MISCELLANEOUS↗

Laser Ceilometer CL51 Demonstration Field Campaign Report

Improvements in the measurements of clouds and the ability to support observation systems are critically important to advancing our understanding and improving global climate model performance. The purpose of a demonstration of the Vaisala CL51 ceilometer was to evaluate its high-range capabilities as a possible augmentation to data provided by the CL31 ceilometer that currently is deployed at U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility sites. Vaisala performed a no-cost demonstration of the equipment; Pacific Northwest National Laboratory (PNNL) supported the data analysis; and ARM provided logistical support, power, maintenance, etc. The laser ceilometer provided measurements of cloud-base height, vertical visibility, and backscatter profile at a vertical range of 15 km. The ceilometer demonstration was conducted during the Characterization of Cirrus and Aerosol Properties campaign (CCAP) to provide coincident observations of cirrus cloud heights and potential backscatter signals by aerosols. This campaign included deployment of a CL51 ceilometer at the ARM Facility’s Southern Great Plains (SGP) site, co-located with the current CL31, micropulse lidar, and balloon-borne sounding system. Data collected from these sensors were analyzed to compare and contrast the data from the CL51 ceilometer.

54 ENVIRONMENTAL SCIENCES↗

NONLINEAR REFLECTION PROCESS OF LINEARLY POLARIZED, BROADBAND ALFVÉN WAVES IN THE FAST SOLAR WIND

Using one-dimensional numerical simulations, we study the elementary process of Alfvén wave reflection in a uniform medium, including nonlinear effects. In the linear regime, Alfvén wave reflection is triggered only by the inhomogeneity of the medium, whereas in the nonlinear regime, it can occur via nonlinear wave–wave interactions. Such nonlinear reflection (backscattering) is typified by decay instability. In most studies of decay instabilities, the initial condition has been a circularly polarized Alfvén wave. In this study we consider a linearly polarized Alfvén wave, which drives density fluctuations by its magnetic pressure force. For generality, we also assume a broadband wave with a red-noise spectrum. In the data analysis, we decompose the fluctuations into characteristic variables using local eigenvectors, thus revealing the behaviors of the individual modes. Different from the circular-polarization case, we find that the wave steepening produces a new energy channel from the parent Alfvén wave to the backscattered one. Such nonlinear reflection explains the observed increasing energy ratio of the sunward to the anti-sunward Alfvénic fluctuations in the solar wind with distance against the dynamical alignment effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Radar Wind Profiler (a0)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

Radar Wind Profiler (a0)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

Radar Wind Profiler (a0)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

Radar Wind Profiler (a0)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

Radar Wind Profiler (a0)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

915rwpprecipmeanlow (a1)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

915rwpprecipmeanhigh (a1)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

915rwpwindmeanlow (a1)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗

915rwpwindmomentlow (a0)

The radar wind profiler/radio acoustic sounding system (RWP/RASS), available in 915-MHz (for U.S. deployments) and 1290-MHz (for foreign deployments), measures wind profiles and backscattered signal strength between (nominally) 0.1 km and 5 km and virtual temperature profiles between 0.1 km and 2.5 km. However, ARM no longer operates the RASS portion. The RWP transmits electromagnetic energy into the atmosphere in as many as five directions (four tilted in opposing vertical planes and on vertical) and measures the strength and frequency of backscattered energy. Calculation of the Doppler shift of the returned signal allows calculation of the atmospheric wind profile.

54 ENVIRONMENTAL SCIENCES↗