Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Additive Construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A high-efficiency, low-Ĉerenkov Micro-Layered Fast-Neutron Detector for the $\mathrm{TREAT}$ hodoscope

Here this paper presents an enabling technology for high-efficiency fast-neutron detection for the Transient Reactor Test (TREAT) Facility hodoscope. The hodoscope is currently outfitted with 25.4-mm long Hornyak buttons for fast-neutron detection. However, they require improvements, as they suffer from low detection efficiency, Ĉerenkov radiation contaminating the signal, and non-linearity of detector response at large transients. To address these issues, a layered ZnS:Ag device has been constructed. The layered design provides various advantages: it incorporates greater scintillation volume, Ĉerenkov background is significantly reduced by eliminating the need for additional light guides, and the detection process is simplified by achieving gamma-ray rejection using only pulse-height discrimination. The result is a greater number of fast neutron counts with reduced background noise contaminating the signal. On being irradiated with a 252Cf source (whose neutron energy spectrum closely mimics a reactor fission spectrum), a 25.4-mm long layered device was found to exhibit an intrinsic fast-neutron detection efficiency of 8.1% for neutrons with an average energy of 2 MeV, while a 43-mm long device allows for a greater number of fast neutron to be detected, increasing the efficiency to 9.1%. Further lengthening of the device up to 20 cm has been numerically predicted to exhibit even higher efficiencies. The detectors can be mass-produced easily and inexpensively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

TRIFIC: The TRIUMF Fast Ion Counter

The TRIUMF Fast Ion Counter (TRIFIC) is a tilted-grid gas counter detector for identifying the impurities in radioactive ion beams (RIBs). Placed at zero degrees downstream of a primary reaction target at the TRIUMF ISAC-II facility, TRIFIC provides accurate Z identification of beam species on an event-by-event basis at a rate of up to 5 × 10 5 particles per second and functions as a beam composition monitor at rates up to 5 × 10 7 particles per second. With this additional level of diagnostics, RIB experiments at TRIUMF are able to reach levels of sensitivity not previously possible. Details pertaining to the construction and instrumentation of TRIFIC as well as results from the commissioning of the detector are introduced.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Applications of neutron radiography for the nuclear power industry

The World Conference on Neutron Radiography (WCNR) and International Topical Meeting on Neutron Radiography (ITMNR) series have been running over 35 years. The most recent event, ITMNR-8, focused on industrial applications and was the first time this series was hosted in China. In China, more than twenty new nuclear power plants are in construction and plans have been announced to increase the nuclear capacity further by a factor of three within fifteen years. There are additional prospects in many other nations. Neutron tests were vital during previous developments of materials and components for nuclear power applications, as reported in this conference series. For example a majority of the 140 papers in the Proceedings of the First WCNR are for the benefit of the nuclear power industry. Included are reviews of the diverse techniques being applied in Europe, Japan, the United States, and at many other centers. Many of those techniques are being utilized and advanced to the present time. Neutron radiography of irradiated nuclear fuel provides more comprehensive information about the internal condition of irradiated nuclear fuel than any other non-destructive technique to date. Applications include examination of nuclear waste, nuclear fuels, cladding, control elements, and other critical components. In this paper, the techniques developed and applied internationally for the nuclear power industry since the earliest years are reviewed, and the question is asked whether neutron test techniques can be of value in development of the present and future generations of nuclear power plants world-wide.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

Neutron Diffraction Characterization of C–H···Li Interactions in a Lithium Aluminate Polymer

The reaction of AlMe3 with tBuLi in the presence of trimethylacetonitrile affords the bimetallic complex [tBu(Me)Al(μ-Me)2Li·NC(tBu)]∞ (1). Pseudotetrahedral Al centers form by the nucelophilic addition of tBuLi to AlMe3.The alkali-metal center is stabilized through coordination of the unreacted nitrile and polymer formation via the construction of Al(μ-Me)nLi (n = 1, 2) motifs. Neutron diffraction evidences agostic interactions in the bridging methyl group to give further stabilization. There is only one previous report of a neutron structure of a lithium aluminate compound. This work therefore offers an important structural example of agostic interactions and the precise nature of Al(μ-Me)2Li bridging.

36 MATERIALS SCIENCE↗
DOE OSTI2015

A POM–organic framework anode for Li-ion battery

Rechargeable Li-ion batteries (LIBs) are currently the dominant power source for portable electronic devices and electric vehicles, and for small-scale stationary energy storage. However, one bottleneck of the anode materials for LIBs is the poor cycling performance caused by the fact that the anodes cannot maintain their integrity over several charge–discharge cycles. In this work, we demonstrate an approach to improving the cycling performance of lithium-ion battery anodes by constructing an extended 3D network of flexible redox active polyoxometalate (POM) clusters with redox active organic linkers, herein described as POMOF. In addition, this architecture enables the accommodation of large volume changes during cycling at relatively high current rates. For example, the POMOF anode exhibits a high reversible capacity of 540 mA h g –1 after 360 cycles at a current rate of 0.25C and a long cycle life at a current rate of 1.25C (>500 cycles).

25 ENERGY STORAGE↗
DOE OSTI2015

Reminiscing about 15 years of interoperability efforts

Over the past fifteen years, our perspective on tackling information interoperability problems for web-based scholarship has evolved significantly. In this opinion piece, we look back at three efforts that we have been involved in that aptly illustrate this evolution: OAI-PMH, OAI-ORE, and Memento. Understanding that no interoperability specification is neutral, we attempt to characterize the perspectives and technical toolkits that provided the basis for these endeavors. With that regard, we consider repository-centric and web-centric interoperability perspectives, and the use of a Linked Data or a REST/HATEAOS technology stack, respectively. In addition, we lament the lack of interoperability across nodes that play a role in web-based scholarship, but end on a constructive note with some ideas regarding a possible path forward.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2020

Hydrodynamics of two-dimensional compressible fluid with broken parity: Variational principle and free surface dynamics in the absence of dissipation

In this paper, we consider an isotropic compressible nondissipative fluid with broken parity subject to free surface boundary conditions in two spatial dimensions. The hydrodynamic equations describing the bulk dynamics of the fluid and the free surface boundary conditions depend explicitly on the parity-breaking nondissipative odd viscosity term. We construct an effective action which gives both bulk hydrodynamic equations and free surface boundary conditions. The free surface boundary conditions require an additional boundary term in the action which resembles a 1+1D chiral boson field coupled to the background geometry. We solve the linearized hydrodynamic equations for the deep water case and derive the dispersion of chiral surface waves. We show that in the long-wavelength limit the flow profile exhibits an oscillating vortical boundary layer near the free surface. The layer thickness is controlled by the ratio between the odd viscosity (ν o ) and the sound velocity (c s ), δ ~ ν o /c s . In the incompressible limit, c s → ∞, the vortical boundary layer becomes singular with the vorticity within the layer diverging as ω ~ c s . The boundary layer is formed by odd viscosity coupling the divergence of velocity ∇ • v to vorticity ∇ × v. It results in nontrivial chiral free surface dynamics even in the absence of external forces. The structure of the odd-viscosity-induced boundary layer is very different from the conventional free surface boundary layer associated with dissipative shear viscosity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Theory of quantum circuits with Abelian symmetries

Quantum circuits with gates (local unitaries) respecting a global symmetry have broad applications in quantum information science and related fields, such as condensed-matter theory and quantum thermodynamics. However, despite their widespread use, fundamental properties of such circuits are not well understood. Recently, it was found that generic unitaries respecting a global symmetry cannot be realized, even approximately, using gates that respect the same symmetry. This observation raises important open questions: What unitary transformations can be realized with k -local gates that respect a global symmetry? In other words, in the presence of a global symmetry, how does the locality of interactions constrain the possible time evolution of a composite system? In this work, we address these questions for the case of Abelian (commutative) symmetries and develop constructive methods for synthesizing circuits with such symmetries. Remarkably, as a corollary, we find that, while the locality of interactions still imposes additional constraints on realizable unitaries, certain restrictions observed in the case of non-Abelian symmetries do not apply to circuits with Abelian symmetries. For instance, in circuits with a general non-Abelian symmetry such as SU ( d ) , the unitary realized in a subspace with one irreducible representation (charge) of the symmetry dictates the realized unitaries in multiple other sectors with inequivalent representations of the symmetry. Furthermore, in certain sectors, rather than all unitaries respecting the symmetry, the realizable unitaries are the symplectic or orthogonal subgroups of this group. We prove that none of these restrictions appears in the case of Abelian symmetries. This result suggests that global non-Abelian symmetries may affect the thermalization of quantum systems in ways not possible under Abelian symmetries. Published by the American Physical Society 2024

Marvian, Iman↗
DOE OSTI2014

TeV-Scale Strings

This article discusses the status of string physics where the string tension is around the TeV scale. Here, the article covers model building basics for perturbative strings, based on D-brane configurations. The effective low energy physics description of such string constructions is analyzed: how anomaly cancellation is implemented, how fast proton decay is avoided and how D-brane models lead to additional Z' particles. This review also discusses direct search bounds for strings at the TeV scale, as well as theoretical issues with model building related to flavor physics and axions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Model-Based Extracted Water Desalination System for Carbon Sequestration

Over the last 1.5 years, GE Global Research and Pennsylvania State University defined a model-based, scalable, and multi-stage extracted water desalination system that yields clean water, concentrated brine, and, optionally, salt. The team explored saline brines that ranged across the expected range for extracted water for carbon sequestration reservoirs (40,000 up to 220,000 ppm total dissolved solids, TDS). In addition, the validated the system performance at pilot scale with field-sourced water using GE’s pre-pilot and lab facilities. This project encompassed four principal tasks, in addition to Project Management and Planning: 1) identify a deep saline formation carbon sequestration site and a partner that are suitable for supplying extracted water; 2) conduct a techno-economic assessment and down-selection of pre-treatment and desalination technologies to identify a cost-effective system for extracted water recovery; 3) validate the downselected processes at the lab/pre-pilot scale; and 4) define the scope of the pilot desalination project. Highlights from each task are described below: Deep saline formation characterization The deep saline formations associated with the five DOE NETL 1260 Phase 1 projects were characterized with respect to their mineralogy and formation water composition. Sources of high TDS feed water other than extracted water were explored for high TDS desalination applications, including unconventional oil and gas and seawater reverse osmosis concentrate. Technoeconomic analysis of desalination technologies Techno-economic evaluations of alternate brine concentration technologies, including humidification-dehumidification (HDH), membrane distillation (MD), forward osmosis (FO), turboexpander-freeze, solvent extraction and high pressure reverse osmosis (HPRO), were conducted. These technologies were evaluated against conventional falling film-mechanical vapor recompression (FF-MVR) as a baseline desalination process. Furthermore, a quality function deployment (QFD) method was used to compare alternate high TDS desalination technologies to FF-MVR. High pressure reverse osmosis was found to a be a promising alternative desalination technology. A deep-dive technoeconomic analysis of HPRO was performed, including Capex and Opex estimates, for seawater RO (SWRO). Additionally, two additional cases were explored: 1) a comparison of a SWRO plus HPRO system to the option of doubling the size of a standard seawater RO system to achieve the same total pure water recovery rate; and 2) a flue gas desulfurization wastewater treatment zero-liquid discharge (ZLD) application, where preconcentration with RO (SWRO or SWRO + HPRO) before evaporation and crystallization was compared to FF-MVR and crystallization technologies without RO preconcentration. Pre-pilot process validation Pre-pilot-scale tests were conducted using field production water to validate key process steps for extracted water pretreatment. Approximately 5,000 gallons of field produced water was processed through, microfiltration, ultrafiltration, and steam regenerable sorbent operations. Smaller quantities were processed through microclarification. In addition, analytical methods (purge-and-trap gas chromatography and Hach TOC analytical methods) were validated. Lab-scale HPRO elements were constructed and tested at high pressures, to identify and mitigate technical risks of the technology. Lastly, improvements in RO membrane materials were identified as the necessary next step to achieve further improvement in element performance at high pressure. Scope of Field Pilot A field pilot for extracted water pretreatment was designed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2018

Prototype Courthouse Building Energy Model: Building and System Characteristics

As part of the Department of Energy’s support of ANSI/ASHRAE/IES Standard 90.1 and the International Energy Conservation Code, researchers at Pacific Northwest National Laboratory apply a suite of prototype buildings covering 80% of the commercial building floor area in the United States for new construction. Efforts have begun to cover 90% of the commercial building floor area in the United States by developing prototype models for additional building types that include supermarket, laboratory, place of worship, public order and safety, and public assembly. “Courthouse” is a subcategory under the “Public Order and Safety” building type category defined by the Commercial Buildings Energy Consumption Survey (CBECS); other subcategories include police station, fire station, and detention and correctional facilities (i.e., jail, reformatory, or penitentiary). Oak Ridge National Laboratory used building design guides, databases, and documented courthouse projects, supplemented by personal communication with courthouse facility planning and design experts, to systematically conduct research on the courthouse building and system characteristics. This report documents this research and reports the building and system characteristics necessary for developing a Courthouse prototype building energy model to be included in the Commercial Building Prototype Model suite.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2018

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. The turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparison to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. The results showed that MSP could highly vary between 893 /kW and 30 /kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. As an example, the unit price of a 5 MW standard design turbine could be 150 /W cheaper than the custom design. Sensitivity analysis indicated that these savings come largely from reduced labor costs for design and engineering and manufacturing setup. In addition to manufacturing cost savings, there is a delivery time saving up to 10 months, which could have a positive effect to construction financing operation time. Another advantage of these standard turbines is their adaptability to different geothermal systems by operating at off-design conditions. We also modeled off-design turbine efficiencies within the commercially-favorable operating range of a standard ORC compared to custom-designed ORC equipment. Than we used these performance calculations and power output capacities in a discounted cash flow (DCF) analysis of plant operations and financing, thereby creating representative techno economic models of a total geothermal power plant. I this scope we used NREL's System Advisor model (SAM) and performed DCF analysis of standard and custom design turbines using results from IPSEpro over range of temperatures of interest. In this scope 63 different off-design cases were analyzed. This helped us to answer the question; 'Can today's capital cost savings compensate the future revenue losses due to lower electricity generation?' The results showed that, the net capital cost savings for the modeled 5 MW case study may reach up to plus 1,298,672. Also, the difference between NPV of standard design and custom design turbine could reach up to 733,940. To sum up, when all the things mentioned above are taken into consideration, it can be said that, the standard turbines are competitive over a wide range of temperatures and flow rates and the give positive NPV differences for certain cases near their design point.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2016

Global Nuclear Markets – Market Arrangements and Service Agreements

The U.S. Department of Energy’s Office of Energy Policy and Systems Analysis (EPSA) requested an assessment of global nuclear markets, including the structure of nuclear companies in different countries and the partnerships between reactor vendors and buyers. EPSA was interested in obtaining information on the competitive context of international sales of reactors and fuel services. The Idaho National Laboratory responded to this request with a plan for information gathering and assessment of global markets in several phases. The first phase researched global sources and developed a collection of information to assist in analyses of global market status and trends in services provided in conversion, enrichment, reactor design, construction and operation, and discharged fuel storage and reprocessing. This report summarized this first phase, including analysis conclusions about current global markets. Additional phases will address specific topics that are of particular interest to EPSA.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Ta compressibility to 20+ Mbar

Developing techniques for experimentally constraining equation of state (EOS) models for important programmatic materials under extreme conditions is vital for advancing our modeling and predictive capabilities. Tantalum is a frequently used standard material for both calibration and testing, and this report describes our work to both measure Ta compressibility to very high pressures and densities using the Ramp Compression Equation of State platform on the National Ignition Facility (NIF). Using a series of seven shots, increasing in peak pressure with each shot, we have made absolute measurements of the compressibility of Ta along the ramp compression path up to 2.3 TPa. Previous experimental measurements constrained the cold compressibility up to ~400 GPa, and there is a spread in the EOS models above that pressure. To improve communication and collaboration between the experimental team and the EOS development group, these new data, along with other experimental and theoretical constraints, were used to develop a Ta equation of state table, M73000. This report first describes the experimental measurements made at the NIF, and then discusses the construction of the EOS model. The ramp compression data can be found in tabular form in Appendix A. Appendix B contains some additional experimental details. In Appendix C we include some additional details on the EOS modeling. At the end of this document, we have attached a detailed report on the NIF ramp compression platform itself and in the main text referenced specific sections for additional details.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evaluation of Hanford Supernatant Waste Evaporation

• Hanford site in Washington has 27 underground “double-shell” storage tanks containing radioactive waste. Storage space is utilized to max capacity. • Construction of new tanks is undesirable, but volume reduction is still possible by vacuum evaporation of liquid waste. • Excess evaporation may create additional problems in solids precipitation, waste density and corrosivity. • Evaporation of liquid waste was simulated to determine possible outcomes.

Barkai, Benjamin [Savannah River National Laborato↗
DOE OSTI2024

Modeling Competing Line-broadening Mechanisms in Neutron Star Atmospheres: Interference between Motional Stark and Ion Broadening

Neutron star surfaces have extremely high magnetic fields. In the atmosphere, the broadening of spectral lines will be substantial from the dense plasma as well as from the magnetic field. One broadening mechanism of note is due to the motional Stark effect (MSE)—an additional electric field that arises from the motion of the atom in the magnetic field. However, approximate formulae are often used to construct atmosphere models, and the MSE is assumed to be the dominant line-broadening mechanism even in ions. Detailed pressure-broadening models in these extreme magnetic fields are now currently being developed. In these more detailed models, it was suggested that the MSE may not be as large as previously predicted. If correct, this hypothesis implies that neutron star line widths might be dominated by pressure broadening rather than by motional Stark broadening. We find that, in the absence of plasma perturbations, for typical magnetic fields (B = 10 12 G), mid-Z elements, such as oxygen, have motional Stark widths of order 1 eV for transitions between dipole-allowed transitions from the ground state, though higher temperatures and transitions to higher-energy states are expected to have more broadening. The MSE also breaks down selection rules, giving rise to forbidden transitions, which have much larger widths. When plasma perturbations are included, we find that the plasma perturbation and motional Stark processes are not independent and, as a result, the spectral lines become narrow in a nontrivial way and display harmonics of the ion cyclotron frequency.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1978

Next steps in space transportation and operations

Design of a 25-kW power or utilities module, capable of extending the effective duration of Spacelab missions, is discussed. The power module, planned for availability in 1984, could also support a Spacelab modified to be a free-flyer by providing attitude control and power. In addition, development of a 250-kW power module to support a Shuttle-tended space platform or a Shuttle-tended space construction base is projected. A free-flying teleoperator capable of deboosting Skylab, systems to construct large planar arrays in space, and a habitable module providing crew quarters for continuously manned operations are also described.

Disher, J. H.↗
NASA NTRS1986

Experience with the CAIS

Intermetrics' experience is that the Ada package construct, which allows separation of specification and implementation allows specification of a CAIS that is transportable across varying hardware and software bases. Additionally, the CAIS is an excellent basis for providing operating system functionality to Ada applications. By allowing the Byron APSE to be moved easily from system to system, and allowing significant re-writes of underlying code. Ada and the CAIS provide portability as well as transparency to change at the application operating system interface level.

Tighe, Michael F.↗