On the bursting of the apex-vortices of a delta wing at low speeds
Bursting of conical vortex sheet above delta wing surface at low speeds
DELTA WING↗
SEARCH · Engineering Papers
Results for “vortex flows”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Systems and Controls Laboratory
Jet spreading in fluid amplifiers, thermal switching of jet flows, and nozzle thrust modulation by vortex generation
Source record↗
Development and application of a method for predicting rotor free wake positions and resulting rotor blade air loads. Volume 1: Model and results
Rotor wake geometries are predicted by a process similar to the startup of a rotor in a free stream. An array of discrete trailing and shed vortices is generated with vortex strengths corresponding to stepwise radial and azimuthal blade circulations. The array of shed and trailing vortices is limited to an arbitrary number of azimuthal steps behind each blade. The remainder of the wake model of each blade is an arbitrary number of trailing vortices. Vortex element end points were allowed to be transported by the resultant velocity of the free stream and vortex-induced velocities. Wake geometry, wake flow, and wake-induced velocity influence coefficients are generated by this program for use in the blade loads portion of the calculations. Blade loads computations include the effects of nonuniform inflow due to a free wake, nonlinear airfoil characteristics, and response of flexible blades to the applied loads. Computed wake flows and blade loads are compared with experimentally measured data. Predicted blade loads, response and shears and moments are obtained for a model rotor system having two independent rotors. The effects of advance ratio, vertical separation of rotors, different blade radius ratios, and different azimuthal spacing of the blades of one rotor with respect to the other are investigated.
Sadler, S. G.↗
Effect of solidity on rocket pump inducer performance.
Experimental and theoretical results of the effect of solidity (chord/spacing) on flow properties, pressure rise and efficiency of a rocket pump inducer are discussed. The experimental investigations are carried out in an inducer of free vortex design, tested in air, at a design flow coefficient of 0.065 and Reynolds number of 660,000. The results indicate that the performance, both pressure rise and efficiency, improve continuously with decrease in solidity, the two bladed inducer showing the best performance. The conclusions derived in this paper should help develop design criteria for inducers, especially in the selection of number of blades or solidity.
Lakshminarayana, B.↗
Flight evaluation of the transonic stability and control characteristics of an airplane incorporating a supercritical wing
A TF-8A airplane was equipped with a transport type supercritical wing and fuselage fairings to evaluate predicted performance improvements for cruise at transonic speeds. A comparison of aerodynamic derivatives extracted from flight and wind tunnel data showed that static longitudinal stability, effective dihedral, and aileron effectiveness, were higher than predicted. The static directional stability derivative was slower than predicted. The airplane's handling qualities were acceptable with the stability augmentation system on. The unaugmented airplane exhibited some adverse lateral directional characteristics that involved low Dutch roll damping and low roll control power at high angles of attack and roll control power that was greater than satisfactory for transport aircraft at cruise conditions. Longitudinally, the aircraft exhibited a mild pitchup tendency. Leading edge vortex generators delayed the onset of flow separation, moving the pitchup point to a higher lift coefficient and reducing its severity.
Matheny, N. W.↗
Boundary layer, skin friction, and boattail pressure measurements from the YF-12 airplane at Mach numbers up to 3
In-flight measurements of boundary layer and skin friction data were made on YF-12 airplanes for Mach numbers between 2.0 and 3.0. Boattail pressures were also obtained for Mach numbers between 0.7 and 3.0 with Reynolds numbers up to four hundred million. Boundary layer data measured along the lower fuselage centerline indicate local displacement and momentum thicknesses can be much larger than predicted. Skin friction coefficients measured at two of five lower fuselage stations were significantly less than predicted by flat plate theory. The presence of large differences between measured boattail pressure drag and values calculated by a potential flow solution indicates the presence of vortex effects on the upper boattail surface. At both subsonic and supersonic speeds, pressure drag on the longer of two boattail configurations was equal to or less than the pressure drag on the shorter configuration. At subsonic and transonic speeds, the difference in the drag coefficient was on the order of 0.0008 to 0.0010. In the supersonic cruise range, the difference in the drag coefficient was on the order of 0.002. Boattail drag coefficients are based on wing reference area.
Fisher, D. F.↗
Improvements in surface singularity analysis and design methods
The coupling of the combined source vortex distribution of Green's potential flow function with contemporary numerical techniques is shown to provide accurate, efficient, and stable solutions to subsonic inviscid analysis and design problems for multi-element airfoils. The analysis problem is solved by direct calculation of the surface singularity distribution required to satisfy the flow tangency boundary condition. The design or inverse problem is solved by an iteration process. In this process, the geometry and the associated pressure distribution are iterated until the pressure distribution most nearly corresponding to the prescribed design distribution is obtained. Typically, five iteration cycles are required for convergence. A description of the analysis and design method is presented, along with supporting examples.
Bristow, D. R.↗
Prediction of aerodynamic characteristics for wings with extensive separations
The development of a simple yet effective technique for modelling the effects of trailing edge separation is discussed. The model encloses the low energy region with free vortex sheets coupled with a potential flow panel method. The technique includes an interation cycle between viscous and potential flow routines and its development from the two dimensional case to the three dimensional case is discussed. A description of the potential flow panel method, which is based on an internal Dirichlet boundary condition, is included.
Maskew, B.↗
Laser-velocimeter flow-field measurements of an advanced turboprop
Non-intrusive measurements of velocity about a spinner-propeller-nacelle configuration at a Mach number of 0.8 were performed. A laser velocimeter, specifically developed for these measurements in the NASA Lewis 8-foot by 6-foot Supersonic Wind Tunnel, was used to measure the flow-field of the advanced swept SR-3 turboprop. The laser velocimeter uses an argon ion laser and a 2-color optics system to allow simultaneous measurements of 2-components of velocity. The axisymmetric nature of the propeller-nacelle flow-field permits two separate 2 dimensonal measurements to be combined into 3 dimensional velocity data. Presented are data ahead of and behind the prop blades and also a limited set in between the blades. Aspects of the observed flow-field such as the tip vortex are discussed.
Serafini, J. S.↗
Laser-velocimeter flow-field measurements of an advanced turboprop
Non-intrusive measurements of velocity about a spinner-propeller-nacelle configuration at a Mach number of 0.8 have been performed. A laser velocimeter, specifically developed for these measurements in the NASA Lewis 8- by 6-foot Supersonic Wind Tunnel, was used to measure the flow-field of the advanced swept SR-3 propeller. The laser velocimeter uses an argon ion laser and a 2-color optics system to allow simultaneous measurements of 2-components of velocity. The axisymmetric nature of the propeller-nacelle flow-field permits two separate 2-dimensional measurements to be combined into 3-dimensional velocity data. Presented are data ahead of and behind the propeller blades and also a limited set in between the blades. Aspects of the observed flow-field such as the tip vortex are discussed.
Serafini, J. S.↗
Flow mechanism and experimental investigation of a rotating stall in transonic compressors
The flow characteristics of the rotating stall in compressors is studied, and a flow model is developed along with a theoretical calculation method based on vortex theory. A detailed theoretical calculation is completed for a two dimensional flow field in a transonic rotor in a rotating stall, and the result is in good agreement with experimental findings. The oscillograms of time-varying stall characteristic parameters recorded for the onset, growth, and cessation processes of rotating stall are analyzed, and some new flow phenomena deserving of further investigation are discovered. These include serious separation of individual blades, often preceding the onset of rotating stall in compressors with very small blade-camber angles, and periodical variation of the circumferential width of the stall cell with time, accompanied by periodical oscillation of the width of the stall cell in the radial direction of the blade. The circumferential and radial oscillation frequencies are the same.
Yajun, L.↗
Effects of nozzle design parameters on the extent of quiet test flow at Mach 3.5
Tests results at the NASA Langley Research Center, involving a Mach 3.5 pilot quiet tunnel, have shown that laminar-layered nozzle walls improve boundary layer stability and reduce stream disturbance levels caused by eddy Mach wave radiation. This type of wall design is required to obtain transition Reynolds numbers on tests models as high as those previously observed in supersonic flight vehicles. The Mach 3.5 pilot nozzle wall boundary layers were tested for Tollmein-Schlichting and Goertler linear amplification, and, in an analysis of Goertler vortices in two axisymmetric Mach 5 nozzles, transition values were found to vary. These values were applied to several nozzles with similar throat heights but different expansion rates. Among the nozzles included in the study, a flat-wall radial flow nozzle and a proposed rod-wall nozzle were tested. For the highest test unit Reynolds number, it was determined that the nozzle wall surface finish should not exceed 0.3 micron. Oil flow studies have indicated that Goertler vortex disturbances were the dominant mechanism causing transition on the walls of the pilot nozzle.
Beckwith, I. E.↗
Effect of ground and/or ceiling planes on thrust of rotors in hover
The thrust produced by a helicopter rotor hovering near ground and/or ceiling planes is investigated experimentally and theoretically. In the experiment, the thrust was measured on a 0.324-m-diam rotor operating between floor and ceiling planes which were located from 6 to 0.08 diam from the rotor disk. In the first theoretical model studied, the incompressible and inviscid flow induced by a sequence of vortex cylinders, located above and below the rotor to simulate the rotor wake and its interaction with the floor and ceiling planes, was considered. Comparison with experiment showed that this model overpredicts the change in thrust caused by the proximity of the walls. Therefore, a second arrangement of vortex cylinders was introduced which provides a more accurate prediction of the ground and ceiling effects on the thrust of the rotor in hover. The applicability of these results to a vented wind tunnel is also discussed.
Rossow, V. J.↗
Theoretical and experimental investigation of vortex breakdown
The slender-vortex approximation was analyzed for incompressible and compressible flow. First the equations of motion were reduced in an order of magnitude analysis. Then compatibility conditions were formulated for the inflow conditions. Thereafter finite-difference-solutions were constructed for incompressible and compressible flow. Finally it was shown that these solutions can be used to describe the flow in slender vortices. The analysis of the breakdown process must, however, be excluded, since its upstream influence cannot be predicted with the slender vortex approximation. The investigaton of this problem is left for future work.
Krause, E.↗
An experimental investigation of dynamic ground effect
Sixty degree delta wing, F-106B, and XB-70 models with and without flap deflections were tested in static and dynamic ground effect in the 36 by 51 inch subsonic wind tunnel at the University of Kansas. Dynamic ground effect was measured with movable sting support. For flow visualization, a tufted wire grid was mounted on the movable sting behind the model. Tests results showed that the lift and drag increments in dynamic ground effect were always lower than the static values. Effect of the trailing-edge flap deflections on lift increments was slight. The fuselage reduced the lift increments at a given ground height. From flow visualization under static conditions, the vortex core was seen to enlarge as the ground approached.
Lee, Pai Hung↗
An experimental investigation of dynamic ground effect
A 60-degree delta wing, an F-106B, and an XB-70 model with and without flap deflections were tested in static and dynamic ground effect in the 36-by 51-inch subsonic wind tunnel at the University of Kansas. Dynamic ground effect was measured with movable sting support. For flow visualization, a tufted wire grid was mounted on the movable sting behind the model. Test results showed that lift and drag increments in dynamic ground effect were always lower than static values. Effect of the trailing edge flap deflections on lift increments was slight. The fuselage reduced the lift increments at a given ground height. From flow visualization under static conditions, the vortex core was seen to enlarge as the ground was approached.
Lee, Pai Hung↗
Numerical simulation of unsteady incompressible viscous flows in generalized coordinate systems
Several numerical solutions of the three dimensional unsteady incompressible Navier-Stokes equations in generalized coordinate systems are presented. The governing equations are discretized by finite volumes with special care to the accurate approximation of the geometric quantities. The unknowns are the pressure and the volume fluxes over the computational cell faces. This formulation results in a robust fractional step solution method for solving discrete equations. Although this method is formulated for the three dimensional case, only two dimensional unsteady results are given. Results are presented for a lid driven two dimensional cavity flow at Reynolds number of 10,000, and for the flow over a circular cylinder with vortex shedding for several Reynolds numbers in the range 100 less than Re less than 1000.
Rosenfeld, Moshe↗
Effect of large amplitude pitching motions on the unsteady aerodynamic characteristics of flat-plate wings
Large-amplitude unsteady motion effects on the aerodynamic force and stability characteristics of flat-plate wings were investigated in a wind tunnel for the cases of two delta wings with respective leading edge sweeps of 70 and 45 deg, and a rectangular wing whose aspect ratio was equal to that of the 70-deg delta wing. Attention was given to the effects of reduced frequency and mean angle of attack. It is found that lags in vortex burst location and separation/reattachment of flow on the upper surface of the wing produced large overshoots and hysteresis loops in normal force and pitching moment coefficients that were a strong function of mean oscillation angle and reduced frequency.
Brandon, Jay M.↗