Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tracking errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Modeling non-gravitational forces acting on TOPEX/POSEIDON: The early days

TOPEX/POSEIDON is a satellite mission that will use altimetry to make precise measurements of sea-level. The principal goal is to measure sea-level with unprecedented accuracy such that small-amplitude, basin wide sea-level changes caused by large-scale ocean circulation can be detected. To reach this goal, the sensor system and orbit must measure sea-level with decimeter accuracy. This requires that the radial component of the orbit be known to the decimeter level. Orbital errors are dominated by mismodelled gravitational and non-gravitational forces. This paper presents our analysis of non-gravitational forces acting on the satellite during the early days of the mission. Studies were conducted by comparing direct estimates of these forces with observed perturbations in the mean orbital elements. The results show that the satellite is experiencing an unexpected along-track acceleration. Hypotheses range from out-gassing to thruster leaks and drag forces to radiative force. Currently, these issues have not been resolved; however, the evidence suggests that out-gassing was dominant during the first weeks of the mission and that thermal imbalances persist.

Christensen, E. J.↗
NASA NTRS1995

Rotational Energy Transfer and Collisional Induced Raman Linewidths in N2 Gas: Energy Transfer Rates - 1

Rotationally inelastic transitions of N2 have been studied in the coupled state (CS) and infinite-order-sudden (IOS) approximations, using the N2-N2 rigidrotor potential of van der Avoird et al. For benchmarking purposes, close coupling (CC) calculations have also been carried out over a limited energy range. The CC and CS cross sections have been obtained both with and without identical molecule exchange symmetry, whereas exchange was neglected in the IOS calculations. The CS results track the CC cross sections rather well; between 113 - 219 cm(exp -1) the average deviation is 14%. Comparison between the CS and IOS cross sections at the high energy end of the CS calculation, 500 - 680 cm(exp -1), shows that IOS is sensitive to the amount of inelasticity and the results for large DELTA J transitions are subject to larger errors. It is found that the state-to-state cross sections with even and odd exchange symmetry agree to better than 2% and are well represented as a sum of direct and exchange cross sections for distinguishable molecules, an indication of the applicability of a classical treatment for this system. This result, however, does not apply to partial cross sections for given total J, but arises from a near cancellation in summing over partial waves. In order to use rigid-rotor results for the calculation of effective rotational excitation rates of N2 in the v=1 vibrational level colliding with bath N2 molecules in the v=0 level, it is assumed that exchange scattering between molecules in different vibrational levels is negligible and direct scattering is independent of Y. Good agreement with room temperature experimental data is obtained. The effective rates determined using the IOS and energy corrected sudden (ECS) approximations are also in reasonable agreement with experiment, with the ECS results being somewhat better. The problem with a degeneracy factor in earlier cross section expressions for collisions between identical molecules is pointed out and corrected.

Huo, Winifred M.↗
NASA NTRS1971

Inertial navigation system using three TDF gyroscopic sensors not jointly mounted on a stable platform

An inertial navigation system is described and analyzed based on two two-degree-of-freedom Schuler-gyropendulums and one two-degree-of-freedom azimuth gyro. The three sensors, each base motion isolated about its two input axes, are mounted on a common base, strapped down to the vehicle. The up and down pointing spin vectors of the two properly tuned gyropendulums track the vertical and indicate physically their velocity with respect to inertial space. The spin vector of the azimuth gyro is pointing northerly parallel to the earth axis. The system can be made self-aligning on a stationary base. If external measurements for the north direction and the vertical are available, initial disturbance torques can be measured and easily biased out. The error analysis shows that the system is practicable with today's technology.

Stieler, B.↗
NASA NTRS1974

Measurement error analysis in determination of small-body gravity fields

We consider analytically the use of existing instrumentation in determining asteroid gravity fields from orbiting spacecraft. Asteroids (Eros as an example) are modeled as homogeneous triaxial ellipsoids, with gravitational potential given by a sperical-harmonic expansion. Mass concentrations are modeled as point masses. The character of spacecraft orbits about asteroids is discussed, along with detectibility of gravitational coefficients and of mass concentrations. A Kalman-filtering treatment of the observation process, for Eros as example, shows that using DSN tracking and onboard gravity gradiometry, radar altimetry, and celestial angle measurements, a single orbit yields asteroid mass to 0.03% and coefficients C20 to C44 to 1% accuracies.

Friedlander, A. L.↗
NASA NTRS1982

Evaluation of LANDSAT-D Orbit Determination Using a Filter/Smoother (PREFER)

Simulated range and range rate data for five tracking stations were first generated using batch least squares orbit determination (GTDS). Then GTDS was used (in the differential correction mode) to produce a nominal trajectory which was input to PREFER. The GTDS differential correction (DC) run was made using models which differed from those used to produce the simulated data. These model differences were chosen to be fairly realistic approximations to the errors in the models actually used for operational orbit determination. Several different simulation runs were made with different types of model errors in order to determine the sensitivity to these errors. The nominal trajectory and the simulated measurement data were input to PREFER to produce a smoothed ephemeris file. Numerous runs of PREFER were made in which parameters describing the statistics of the model errors were varied. The likelihood function computed by the Kalman filter determined the ""best'' choice of input parameters. There was strong negative correlation between the likelihood function and the errors in the smoothed ephemeris.

Gibbs, B. P.↗
NASA NTRS1988

A new class of energy based control laws for revolute robot arms - Tracking control, robustness enhancement and adaptive control

A class of joint-level control laws for all-revolute robot arms is introduced. The analysis is similar to the recently proposed energy Liapunov function approach except that the closed-loop potential function is shaped in accordance with the underlying joint space topology. By using energy Liapunov functions with the modified potential energy, a much simpler analysis can be used to show closed-loop global asymptotic stability and local exponential stability. When Coulomb and viscous friction and model parameter errors are present, a sliding-mode-like modification of the control law is proposed to add a robustness-enhancing outer loop. Adaptive control is also addressed within the same framework. A linear-in-the-parameters formulation is adopted, and globally asymptotically stable adaptive control laws are derived by replacing the model parameters in the nonadaptive control laws by their estimates.

Wen, John T.↗
NASA NTRS2008

Exploring Cosmic X-ray Source Polarization

Cosmic X-ray sources are expected to be polarized, either because of their asymmetry and the role of scattering in their emission or the role of magnetic fields. Polarization at other wavelengths has been useful. X-ray polarization will provide a new handle on black hole parameters, in particular the spin, on accretion flows and outflows, on neutron star spin orientations and emission mechanisms, on the quantum mechanical effects of super-strong magnetic fields of magnetars, and on the structure of supernovae shocks. The proposed Gravity and Extreme Magnetism SMEX (GEMS) will use high efficiency polarimeters behind thin foil mirrors. The statistical sensitivity and control of systematics will allow measurement of polarization fractions as small as 1% from many galactic and extragalactic sources. Targets which should be polarized at the level that GEMS can easily measure include stellar black holes, Seyfert galaxies and quasars, blazars, rotation-powered and accretion-powered pulsars, magnetars, shell supernova remnants and pulsar wind nebulae. The polarimeters are Time Projection Chambers that allow reconstruction of images of photoelectron tracks for 2-10 keV Xrays. They can be deep without sacrificing modulation. These polarimeters do not image the sky, but the telescope point spread function and detector collimation allow structure to be resolved at the 10 arcmin level. Rotation of the spacecraft is not needed for the signal measurement in the Time Projection Chambers, but provides for measurement and correction of systematic errors. It also allows a small Bragg reflection soft X-ray experiment to be included that can be used for isolated neutron stars and blazars.

Swank, Jean Hebb↗
NASA NTRS2011

Small Body Landing Accuracy Using In-Situ Navigation

Spacecraft landings on small bodies (asteroids and comets) can require target accuracies too stringent to be met using ground-based navigation alone, especially if specific landing site requirements must be met for safety or to meet science goals. In-situ optical observations coupled with onboard navigation processing can meet the tighter accuracy requirements to enable such missions. Recent developments in deep space navigation capability include a self-contained autonomous navigation system (used in flight on three missions) and a landmark tracking system (used experimentally on the Japanese Hayabusa mission). The merging of these two technologies forms a methodology to perform autonomous onboard navigation around small bodies. This paper presents an overview of these systems, as well as the results from Monte Carlo studies to quantify the achievable landing accuracies by using these methods. Sensitivity of the results to variations in spacecraft maneuver execution error, attitude control accuracy and unmodeled forces are examined. Cases for two bodies, a small asteroid and on a mid-size comet, are presented.

in-situ navigation↗
NASA NTRS2012

EDOS Data Capture for ALOS

In 2008, NASA's Earth Sciences Missions Operations (ESMO) at Goddard Space Flight Center (GSFC) directed the Earth Observing System Data Operations System (EDOS) project to provide a prototype system to assess the feasibility of high rate data capture for the Japan Aerospace Exploration Agency's (JAXA) Advanced Land Observing Satellite (ALOS) spacecraft via NASA's Tracking and Data Relay Satellite System (TDRSS). The key objective of this collaborative effort between NASA and JAXA was to share science data collected over North and South America previously unavailable due to limitations in ALOS downlink capacity. EDOS provided a single system proof-of-concept in 4 months at White Sands TDRS Ground Terminal The system captured 6 ALOS events error-free at 277 Mbps and delivered the data to the Alaska Satellite Facility (ASF) within 3 hours (May/June '08). This paper describes the successful rapid prototyping approach which led to a successful demonstration and agreement between NASA and JAXA for operational support. The design of the operational system will be discussed with emphasis on concurrent high-rate data capture, Level-O processing, real-time display and high-rate delivery with stringent latency requirements. A similar solution was successfully deployed at Svalbard, Norway to support the Suomi NPP launch (October 2011) and capture all X-band data and provide a 30-day backup archive.

McLemore, Bruce↗
NASA NTRS1986

Impact of mismodeled idle engine performance on calculation and tracking of optimal 4-D descent trajectories

Advanced flight management systems are being developed which are capable of calculating optimal 3-D and 4-D flight trajectories for arbitrary fuel and time costs. These systems require mathematical models of airplane performance in order to compute the optimal profiles. Mismodeled idle engine characteristics can result in descent trajectories requiring excessive throttle and/or speedbrake activity in order to achieve the desired end conditions. This paper evaluates the cost and fuel penalties, trajectory variations, and flight control requirements associated with typical idle engine modeling errors for a twin-jet transport airplane. Variations in idle power setting, thrust, fuel flow, and surge bleed operation were evaluated for a cruise/descent flight segment. The results of this analysis provide insight into the penalties associated with uncertainties in idle engine performance and suggest methods of modeling which minimize these penalties.

Williams, D. H.↗
NASA NTRS1972

The determination of the satellite orbit of Mariner 9.

This paper presents a comprehensive analysis of the Mars orbital phase of the Mariner 9 trajectory as determined from Earth based radio data. Both the method and accuracy of the orbit determination process are reviewed. Analysis is presented to show the effects of Mars gravity model and node in the plane of the sky errors on the accuracy of orbit determination. In addition the long term evolution of the orbit from insertion to date is presented, and is decomposed into effects from the Mars gravity field, n-body perturbations, and solar radiation pressure. Since the orbit period is nearly commensurable with the Mars rotational period, the orbit experiences significant resonance perturbations. The primary perturbation is in-track with a maximum amplitude of 1000 km and a wavelength of 39 revolutions.

Born, G. H.↗
NASA NTRS1974

Optimal space communications techniques

The encoding of video signals using the Song Adaptive Delta Modulator (Song ADM) is discussed. The video signals are characterized as a sequence of pulses having arbitrary height and width. Although the ADM is suited to tracking signals having fast rise times, it was found that the DM algorithm (which permits an exponential rise for estimating an input step) results in a large overshoot and an underdamped response to the step. An overshoot suppression algorithm which significantly reduces the ringing while not affecting the rise time is presented along with formuli for the rise time and the settling time. Channel errors and their effect on the DM encoded bit stream were investigated.

Schilling, D. L.↗
NASA NTRS1976

Linear minimum variance filters applied to carrier tracking

A new approach is taken to the problem of tracking a fixed amplitude signal with a Brownian-motion phase process. Classically, a first-order phase-lock loop (PLL) is used; here, the problem is treated via estimation of the quadrature signal components. In this space, the state dynamics are linear with white multiplicative noise. Therefore, linear minimum-variance filters, which have a particularly simple mechanization, are suggested. The resulting error dynamics are linear at any signal/noise ratio, unlike the classical PLL. During synchronization, and above threshold, this filter with constant gains degrades by 3 per cent in output rms phase error with respect to the classical loop. However, up to 80 per cent of the maximum possible noise improvement is obtained below threshold, where the classical loop is nonoptimum, as demonstrated by a Monte Carlo analysis. Filter mechanizations are presented for both carrier and baseband operation.

Gustafson, D. E.↗
NASA NTRS1980

An analysis of network deployment for a dedicated navigation tracking system

Stringent navigation accuracy requirements for future deep space missions are expected to be met by conventional two way radio metric data supplemented with Very Long Baseline Interferometric (VLBI) data provided by a dedicated tracking network. The performance of several proposed VLBI network configurations have been evaluated by comparing navigation capability for the probe delivery and post flight probe trajectory phases of the Galileo mission. Candidate configurations include stations located at the current intercontinental DSN sites, a network with sites in Hawaii, Florida and Washington, Regional (300 km) and a Micro (30 km) baseline systems. Sensitivity to systematic error sources, network deployment, viewing period and sampling strategy are investigated. The dominant factor in performance is shown to be the baseline length.

Ellis, J.↗
NASA NTRS1982

Occultation by a possible third satellite of Neptune

The 24 May 1981 close approach of Neptune to an uncataloged star was photoelectrically monitored from two observatories separated by 6 kilometers parallel to the occultation track. An 8.1-second drop in signal, recorded simultaneously at both sites, is interpreted as resulting from the passage of a third satellite of Neptune in front of the star. From the duration of the event, the derived minimum diameter for an object sharing Neptune's motion is 180 kilometers. If the object was in Neptune's equatorial plane and there are no significant errors in the prediction ephemeris, the object was located at a distance of 3 Neptune radii from Neptune's center.

Reitsema, H. J.↗
NASA NTRS1990

The effect of tracking network configuration on GPS baseline estimates for the CASA Uno experiment

The effect of the tracking network on long (greater than 100 km) GPS baseline estimates was estimated using various subsets of the global tracking network initiated by the first Central and South America (CASA Uno) experiment. It was found that best results could be obtained with a global tacking network consisting of three U.S. stations, two sites in the southwestern Pacific, and two sites in Europe. In comparison with smaller subsets, this global network improved the baseline repeatability, the resolution of carrier phase cycle ambiguities, and formal errors of the orbit estimates.

Wolf, S. Kornreich↗
NASA NTRS2003

Variational Continuous Assimilation of TMI and SSM/I Rain Rates: Impact on GEOS-3 Hurricane Analyses and Forecasts

We describe a variational continuous assimilation (VCA) algorithm for assimilating tropical rainfall data using moisture and temperature tendency corrections as the control variable to offset model deficiencies. For rainfall assimilation, model errors are of special concern since model-predicted precipitation is based on parameterized moist physics, which can have substantial systematic errors. This study examines whether a VCA scheme using the forecast model as a weak constraint offers an effective pathway to precipitation assimilation. The particular scheme we exarnine employs a '1+1' dimension precipitation observation operator based on a 6-h integration of a column model of moist physics from the Goddard Earth Observing System (GEOS) global data assimilation system DAS). In earlier studies, we tested a simplified version of this scheme and obtained improved monthly-mean analyses and better short-range forecast skills. This paper describes the full implementation ofthe 1+1D VCA scheme using background and observation error statistics, and examines how it may improve GEOS analyses and forecasts of prominent tropical weather systems such as hurricanes. Parallel assimilation experiments with and without rainfall data for Hurricanes Bonnie and Floyd show that assimilating 6-h TMI and SSM/I surfice rain rates leads to more realistic storm features in the analysis, which, in turn, provide better initial conditions for 5-day storm track prediction and precipitation forecast. These results provide evidence that addressing model deficiencies in moisture tendency may be crucial to making effective use of precipitation information in data assimilation.

Hou, Arthur Y.↗
NASA NTRSDate not supplied

Detecting Satellite Laser Ranging Station Data and Operational Anomalies with Machine Learning Isolation Forests at NASA's CDDIS

The International Laser Ranging Service (ILRS) is currently composed of 45 active satellite laser ranging (SLR) stations with several more set to join the network over the next several years. Station changes and histories are logged to files, but not always in real time. Sometimes these details are not added until long after changes have been made to the station –on occasion, years later. This in addition to unexpected hardware errors and other system issues that are not immediately detected impact the products generated by analysts. The ILRS Central Bureau (CB) and NASA’s Crustal Dynamics Data Information System (CDDIS) have worked to provide tools for station engineers to use. This includes the creation of station plots which contain temperature and pressure information along with LAser GEOdynamic Satellite (LAGEOS) and LAser RElativity Satellite (LARES) tracking information that enable the monitoring of station performance and todetermine whether the station has undergone any changes. As next steps, the CDDIS is working to enhance these station performance monitoring tools through machine learning. Isolation forest is an unsupervised machine learning algorithm commonly applied to anomaly detection. In this poster, the CDDIS details the steps taken to track anomalies within SLR station performance using isolation forest with LAGEOS and LARES satellite data.

Benjamin P Michael↗