Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Full core LOCA analysis for BWR/6 - Methodology and first results

As part of collaboration between the Paul Scherrer Institute (PSI) and the Swiss regulator ENSI, a study aimed at core-wide estimates of the fuel rod behaviour during large-break loss-of-coolant-accidents (LB-LOCA) in BWR/6 plants was recently conducted on the basis of a Swiss reactor. To perform such full core LOCA analysis, a methodology consisting of a multi-physics sequence of interfaced best-estimate models and codes was established: CASMO-4E/SIMULATE-3 (C4/S3) for the core modelling, TRACE for the plant system analysis and FALCON for the fuel thermomechanical calculations during base irradiation (BI) as well as for the transient analyses (TA). As starting point, reference C4/S3 models validated for all operated cycles of the given plant were used to select as situation target, a recent cycle representative of modern BWR core loadings and fuel assembly designs. Based on the selected C4/S3 cycle model, PSI in-house computational modules were developed or updated in order to set up the TRACE full core model with regards to assembly geometries, fuel rods thermophysical properties and initial 3-D power distributions. Also, an interface to FALCON BI models was established for the transfer of the irradiation history, including primarily linear heat generation rates (LHGR), for an equivalent fuel pin. For each assembly, the power of the equivalent pin is defined with the maximum power of all pins at each axial position. However, in order to reduce the computational time of the fuel performance analyses, the whole core was subdivided into groups of assemblies, each represented by the most powerful assembly within the group. On this basis, the FALCON BI analyses were conducted with coupling to the PSI advanced model for gas release and swelling (GRWS-A) and an interface was developed to transfer the calculated fuel rod characteristics at end of irradiation to initialize the core fuel rods heat structures in the TRACE model. Subsequently, double-ended recirculation line rupture scenarios at hot-full-power (HFP) conditions were investigated with TRACE in order to determine a conservative transient case as function of cycle burnup, single failure criterion and availability of safety systems. For the most conservative case of this study, an interface was set-up to transfer the TRACE results as boundary conditions to the FALCON TA models, including thus primarily time and axial distributions of the clad outer temperatures. As final step, the FALCON TA were conducted for the representative assemblies in order to infer core-wide estimates of the fuel rod behaviour with specific focus on equivalent cladding reacted levels, hoop strains as well as margins to failure criteria. The objective of this paper is to present this methodology along with the obtained first results. Regarding the latter, it is found that principally, even for the most conservative LOCA scenario of this study, the clad temperature excursion remains mild enough at all core locations such that no significant rod ballooning and no cladding failure is predicted, something in line with corresponding analyses conducted earlier for BWR/4 plants. (authors)

42 ENGINEERING↗
DOE OSTI2022

Constraining Type Ia supernova explosions and early flux excesses with the Zwicky Transient Factory

In the new era of time-domain surveys, Type Ia supernovae are being caught sooner after explosion, which has exposed significant variation in their early light curves. Two driving factors for early-time evolution are the distribution of 56 Ni in the ejecta and the presence of flux excesses of various causes. We perform an analysis of the largest young SN Ia sample to date. We compare 115 SN Ia light curves from the Zwicky Transient Facility to the turtls model grid containing light curves of Chandrasekhar mass explosions with a range of 56 Ni masses, 56 Ni distributions, and explosion energies. We find that the majority of our observed light curves are well reproduced by Chandrasekhar mass explosion models with a preference for highly extended 56 Ni distributions. We identify six SNe Ia with an early-time flux excess in our gr-band data (four ‘blue’ and two ‘red’ flux excesses). We find an intrinsic rate of 18 ± 11 percent of early flux excesses in SNe Ia at z < 0.07, based on three detected flux excesses out of 30 (10 percent) observed SNe Ia with a simulated efficiency of 57 percent. This is comparable to rates of flux excesses in the literature but also accounts for detection efficiencies. Two of these events are mostly consistent with circumstellar material interaction, while the other four have longer lifetimes in agreement with companion interaction and 56 Ni-clump models. We find a higher frequency of flux excesses in 91T/99aa-like events (44 ± 13 percent).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Neutron measurements from antineutrino hydrocarbon reactions

Charged-current antineutrino interactions on a hydrocarbon scintillator in the MINERvA detector are used to study activity from their final-state neutrons. To ensure that most of the neutrons are from the primary interaction, rather than hadronic reinteractions in the detector, the sample is limited to momentum transfers below 0.8 GeV / c . From 16 129 interactions, 15 246 neutral particle candidates are observed. The reference simulation predicts 64% of these candidates are due to neutrons from the antineutrino interaction directly but also overpredicts the number of candidates by 15% overall. This discrepancy is beyond the standard uncertainty estimates for models of neutrino interactions and neutron propagation in the detector. We explore these two aspects of the models using the measured distributions for energy deposition, time of flight, position, and speed. We also use multiplicity distributions to evaluate the presence of a two-nucleon knockout process. These results provide critical new information toward a complete description of the hadronic final state of neutrino interactions, which is vital to neutrino oscillation experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A Deep Generative Model for Non-Intrusive Identification of EV Charging Profiles

The proliferation of electric vehicles (EVs) brings environmental benefits and technical challenges to power grids. An identification algorithm which can accurately extract individual EV charging profiles out of widely available smart meter measurements has attracted great interests. This paper proposes a non-intrusive identification framework for EV charging profile extraction, which is driven by deep generative models (DGM). First, the proposed DGM is designed as a representation layer embedded into the Markov process and used to model the joint probability distribution of available time-series data. A novel contribution is to approximate posterior distributions by neural networks whose parameters are obtained by variational inference and supervised learning. Second, the EV charging status is inferred from the DGM via dynamic programming. Lastly, the desired EV charging profile can be reconstructed by the rated power of EV models and inferred status. Compared with the benchmark Hidden Markov Models, the proposed framework can better handle noise in data with less computational complexity and better overall accuracy performances with smaller recall. The proposed framework is validated by numerical experiments on the Pecan Street dataset.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Physics-driven learning of Wasserstein GAN for density reconstruction in dynamic tomography

Object density reconstruction from projections containing scattered radiation and noise is of critical importance in many applications. Existing scatter correction and density reconstruction methods may not provide the high accuracy needed in many applications and can break down in the presence of unmodeled or anomalous scatter and other experimental artifacts. Incorporating machine-learning models could prove beneficial for accurate density reconstruction, particularly in dynamic imaging, where the time evolution of the density fields could be captured by partial differential equations or by learning from hydrodynamics simulations. In this work, we demonstrate the ability of learned deep neural networks to perform artifact removal in noisy density reconstructions, where the noise is imperfectly characterized. Here, we use a Wasserstein generative adversarial network (WGAN), where the generator serves as a denoiser that removes artifacts in densities obtained from traditional reconstruction algorithms. We train the networks from large density time-series datasets, with noise simulated according to parametric random distributions that may mimic noise in experiments. The WGAN is trained with noisy density frames as generator inputs, to match the generator outputs to the distribution of clean densities (time series) from simulations. A supervised loss is also included in the training, which leads to an improved density restoration performance. In addition, we employ physics-based constraints such as mass conservation during the network training and application to further enable highly accurate density reconstructions. Our preliminary numerical results show that the models trained in our frameworks can remove significant portions of unknown noise in density time-series data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

PLASMA EFFECTS ON EXTRAGALACTIC ULTRAHIGH-ENERGY COSMIC-RAY HADRON BEAMS IN COSMIC VOIDS. II. KINETIC INSTABILITY OF PARALLEL ELECTROSTATIC WAVES

The linear instability of an ultrarelativistic hadron beam in the unmagnetized intergalactic medium (IGM) is investigated with respect to the excitation of parallel electrostatic and electromagnetic fluctuations. This analysis is important for the propagation of extragalactic ultrarelativistic cosmic rays from their distant sources to Earth. As opposed to the previous paper, we calculate the minimum instability growth time for Lorentz-distributed cosmic rays which traverse the hot IGM. The growth times are orders of magnitude higher than the cosmic-ray propagation time in the IGM. Since the backreaction of the generated plasma fluctuations (plateauing) lasts longer than the propagation time, the cosmic-ray hadron beam can propagate to the Earth without losing a significant amount of energy to electrostatic turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Geometry dependence of optical pulse broadening in multiple scattering media

A Monte Carlo simulation method has been used to evaluate the temporal response at a variety of receivers to an instantaneous laser pulse input to a turbid medium. The results are compared to the description of the ensemble of all transmitted photons for which a diffusion theory was developed. It was shown that the arrival times for all photons transmitted through the cloud are exponentially distributed with a mean time that varies as the product of the cloud thickness and the momentum transfer optical depth. For large optical depths the mean time delay associated with all reflected photons was found to depend only on the cloud thickness. The impulse response function for receivers on the beam axis varied with field of view and for small fields of view it was dominated by single scattering even for optically thick clouds. In these cases, the mean time delay could be up to 10 to the 6th times shorter than that associated with all transmitted photons with a related increase in the maximum modulation frequency.

Thomas, R. W. L.↗
NASA NTRS1985

Studies of Model Immiscible Systems

The objectives are to use model transparent monotectics to obtain fundamental information applicable to two-phase systems in general, to apply this understanding to materials of interest in the Microgravity Science and Applications program, and to interpret results of flight experimental involving monotectic alloys. A number of model immiscible systems are in use to study various aspects of two-phase behavior within the miscibility gap and during solidification. Particle growth, coalescence and particle motions are under investigation using a holographic microscopy system. The system is capable of working with particle densities up to 10 to the 7th power particles/cubic centimeters through a 100 micron depth and can resolve particles of the order of 2 to 3 micron in diameter throughout the entire cell volume. Particle size, distribution changes with respect to time and temperature are observable from sequential holograms. Initial experiments using diethylene glycol/ethyl salicylate (DEG/ES) have demonstrated the usefulness of the technique. The thermal system controls temperature to at least plus or minus 0.001 K over the course of an experiment. A time-lapse film, made from holograms, of a succinonitrile/water solution shows particle size and number distribution changes with time under isothermal conditions. The observations are consistent with Ostwald ripening theory.

Frazier, D. O.↗
NASA NTRS1989

Alternative majority-voting methods for real-time computing systems

Two techniques that provide a compromise between the high time overhead in maintaining synchronous voting and the difficulty of combining results in asynchronous voting are proposed. These techniques are specifically suited for real-time applications with a single-source/single-sink structure that need instantaneous error masking. They provide a compromise between a tightly synchronized system in which the synchronization overhead can be quite high, and an asynchronous system which lacks suitable algorithms for combining the output data. Both quorum-majority voting (QMV) and compare-majority voting (CMV) are most applicable to distributed real-time systems with single-source/single-sink tasks. All real-time systems eventually have to resolve their outputs into a single action at some stage. The development of the advanced information processing system (AIPS) and other similar systems serve to emphasize the importance of these techniques. Time bounds suggest that it is possible to reduce the overhead for quorum-majority voting to below that for synchronous voting. All the bounds assume that the computation phase is nonpreemptive and that there is no multitasking.

Shin, Kang G.↗
DOE OSTI2015

Velocity space evolution of a minority energetic electron population undergoing the anomalous Doppler instability

The kinetic evolution in velocity space of a minority suprathermal electron population that is undergoing the anomalous Doppler instability (ADI) is investigated using the results from fully nonlinear numerical simulations that self-consistently evolve particles and fields in a plasma. Electron trajectories in phase space during different stages of the ADI are captured, and are analysed in relation to the characteristics of the excited electric fields and of the overall distribution of particles. For some electrons, trapping and mirroring effects are observed during the saturation phase. A relationship between the second order moments of the perpendicular electron distribution function and time is established, and is used to investigate the range of applicability of analytical approximations drawn from classical theory, that involve a quasilinear wave-driven diffusion operator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRSDate not supplied

Ground Segment Operations Concept for the Orion Artemis-2 Optical Communications System

The ACCESS Project (formerly Space Network) will implement an optical communications ground segment to support the Orion Artemis II Optical Communications (O2O) demonstration as part of the next manned human spaceflight mission to the moon, Artemis II. O2O implements laser communication (lasercomm) technology for operational use on the Orion series of spacecraft, as a development test objective (DTO), in order to demonstrate the feasibility and operational utility of lasercomm for human spaceflight missions. O2O consists of three segments: Space Segment, Ground Segment, and Operations Segment. The Space Segment consists of the Space Terminal Element and the Orion spacecraft. The Space Terminal Element effort is managed by the GSFC Laser-Enhanced Mission Communications Navigation and Operational Services (LEMNOS) project in collaboration with MIT Lincoln Laboratory. The Ground Segment consists of an optical ground terminal (GT) at the White Sands Complex (WSC), which is being developed in collaboration with MIT Lincoln Laboratory, the Ground Segment Operations and Analysis (GSOA) element and Ground Data Element (GDE), and a second optical GT in the Optical Communications Telescope Laboratory (OCTL) at the JPL Table Mountain Facility. The Operations Segment consists of the Artemis II Mission Control Center (MCC), the Lasercomm Space Terminal Console (LSTC), and the Lasercomm Link Planning & Analysis Center (LPAC), all located at the Johnson Space Center (JSC). O2O utilizes pulse-position modulation (PPM) direct-to-earth services resulting in an 80 Mbps downlink data rate from lunar orbit. The O2O concept of operations is to provide optical services for a minimum of 1 hour per day for each day of the Artemis II mission. O2O will utilize a 10-20 Mbps uplink data rate and 40-260 Mbps downlink data rate, depending on the Artemis II mission phase. The ACCESS project will also provide a centralized mission data interface for user data distribution and storage to the MCC and perform planning and scheduling of services in coordination with the Operations Segment for the O2O Ground Segment. The O2O Ground Segment will support the following O2O mission phases: Pre-Mission Planning; Daily Operations Planning; Event Execution; and Post-Pass Reporting. O2O will be used to exchange data files between Orion and the MCC and to distribute real-time video through the optical downlink service to the MCC; which would not be possible without the high-bandwidth link that O2O will provide to Orion. In this paper, I will discuss the O2O Ground Segment development approach and how it will support these critical O2O functions: plan and schedule the contact; acquire and track the optical link; flow information bidirectionally; distribute information; and control and accommodate the system.

optical communications↗
NASA NTRS2012

The HAL 9000 Space Operating System Real-Time Planning Engine Design and Operations Requirements

In support of future deep space manned missions, an autonomous/automated vehicle, providing crew autonomy and an autonomous response planning system, will be required due to the light time delays in communication. Vehicle capabilities as a whole must provide for tactical response to vehicle system failures and space environmental effects induced failures, for risk mitigation of permanent loss of communication with Earth, and for assured crew return capabilities. The complexity of human rated space systems and the limited crew sizes and crew skills mix drive the need for a robust autonomous capability on-board the vehicle. The HAL 9000 Space Operating System[2] designed for such missions and space craft includes the first distributed real-time planning / re-planning system. This paper will detail the software architecture of the multiple planning engine system, and the interface design for plan changes, approval and implementation that is performed autonomously. Operations scenarios will be defined for analysis of the planning engines operations and its requirements for nominal / off nominal activities. An assessment of the distributed realtime re-planning system, in the defined operations environment, will be provided as well as findings as it pertains to the vehicle, crew, and mission control requirements needed for implementation.

Stetson, Howard↗
DOE OSTI2020

DEEP Solar: Data DrivEn Modeling and Analytics for Enhanced System Layer ImPlementation

Realizing the SETO 2030 mission of reducing solar energy costs to 3-5 c/kWh will require innovative enabling research on effective, cost-efficient integration of local PV within distribution systems. However, the intermittent and variable nature of PVs compels operators to impose conservative hosting capacity constraints. Given the extremely high variability of (intermittent and unpredictable) solar energy generation, relaxing the capacity constraints (which are currently around 15%) and achieving 100% or greater integration of renewables will require a fundamental transformation of the power grid via the utilization of exponentially larger amounts of AMI enabled fine-grained data. To address the challenges in increasing the penetration of renewable energy based DERs, this project envisions an Enhanced System Layer (ESL) at the distribution network level that is reliable, cost-effective and scalable to millions of Distributed Energy Resources (DERs)/devices. This includes developing: 1) Transformative and highly scalable machine learning based predictive analytics tools that plug into distribution system planning and provide real-time situational awareness at the distribution level for short and long-term operational planning. The tools will be built using novel data-driven energy models of millions of active nodes with AMI, 2) Adaptive stochastic analysis and optimization algorithms for real-time grid operations, 3) Dynamic Scenario Analysis using parallel Cloudenabled implementations with < 1 minute computational cycle times.

14 SOLAR ENERGY↗
DOE OSTI2020

Flexibility Estimation and Control of Thermostatically Controlled Loads with Lock Time for Regulation Service

A virtual battery model is a simple and general method to quantify aggregate flexibility from thermostatically controlled loads (TCLs), enabling grid operators to effectively coordinate a large number of flexible building loads with supplyside resources in power systems. Lockout controls are designed to avoid wear and tear resulting from short-cycling of hardware. The lock on/off time could significantly affect aggregate flexibility from TCLs to provide ancillary services and may even fail control algorithms designed without considering the lock time constraints. This paper focuses on flexibility estimation and control design for TCLs with lock time constraints to provide frequency regulation service. We first investigate the potential impacts of lock time on TCLs’ aggregate flexibility and control performance. Both control-dependent and control-independent power bounds are derived, based on either previous TCL switching operations or regulation signals. While the control-dependent method provides aggregate flexibility for a given control method, the control-independent method calculates the theoretical maximum of power bounds. Two control algorithms are proposed to better distribute flexibility over time and thereby improve signal tracking performance. The proposed methods are illustrated and validated through simulations.

Wang, Peng↗
DOE OSTI2019

Unifying Energetic Disorder from Charge Transport and Band Bending in Organic Semiconductors

Abstract Characterizing the density of states (DOS) width accurately is critical in understanding the charge‐transport properties of organic semiconducting materials as broader DOS distributions lead to an inferior transport. From a morphological standpoint, the relative densities of ordered and disordered regions are known to affect charge‐transport properties in films; however, a comparison between molecular structures showing quantifiable ordered and disordered regions at an atomic level and its impact on DOS widths and charge‐transport properties has yet to be made. In this work, for the first time, the DOS distribution widths of two model conjugated polymer systems are characterized using three different techniques. A quantitative correlation between energetic disorder from band‐bending measurements and charge transport is established, providing direct experimental evidence that charge‐carrier mobility in disordered materials is compromised due to the relaxation of carriers into the tail states of the DOS. Distinction and quantification of ordered and disordered regions of thin films at an atomic level is achieved using solid‐state NMR spectroscopy. An ability to compare solid‐state film morphologies of organic semiconducting polymers to energetic disorder, and in turn charge transport, can provide useful guidelines for applications of organic conjugated polymers in pertinent devices.

Karki, Akchheta↗
DOE OSTI2016

Comparative time-resolved photoemission from the Cu(100) and Cu(111) surfaces

Motivated by the striking dependence of the valence electronic structure of transition metal surfaces on their crystallographic orientation, and by emerging experiments on laser-assisted extended ultraviolet (XUV) photoemission from solid surfaces, we calculate photoemission spectra from Cu(100) and Cu(111) surfaces as a function of the photoelectron final kinetic energy and the delay between the ionizing attosecond XUV pulse train and assisting infrared (IR) laser pulse. Our numerical simulations predict distinct differences in delay-dependent photoelectron energy distributions and photoemission time delays for Cu(100) and Cu(111) surfaces. Furthermore, these differences can be scrutinized experimentally with existing technology in a suggested in situ comparative RABBITT (reconstruction of attosecond beating by interference of two-photon transitions) configuration by placing the two surfaces on a sliding platform while keeping all optical components and pathlengths fixed. Our calculations also show that the inclusion of the Fresnel-reflected incident IR pulse at the metal-vacuum interface modifies photoelectron spectra and photoemission time delays in a characteristic way that reveals the degree of spatial location of the initial electronic states.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

An immersed interface method for the 2D vorticity-velocity Navier-Stokes equations with multiple bodies

We present an immersed interface method for the vorticity-velocity form of the 2D Navier Stokes equations that directly addresses challenges posed by nonconvex immersed bodies, multiply connected domains, and the calculation of force distributions on immersed surfaces. The immersed interface method is re-interpreted as a polynomial extrapolation of flow quantities and boundary conditions into the immersed solid bodies, reducing computational cost and enabling simulations with nonconvex bodies that could not be discretized with previous immersed interface methods. In the flow, the vorticity transport equation is discretized using a conservative finite difference scheme and explicit Runge-Kutta time integration. The velocity reconstruction problem is transformed to a scalar Poisson equation that is discretized with conservative finite differences, and solved using an FFT-accelerated iterative algorithm. The use of conservative differencing throughout leads to exact enforcement of a discrete Kelvin's theorem, allowing for simulations with multiply connected domains and outflow boundaries that have challenged other immersed interface vortex methods. We also explore novel methods for recovering time-dependent pressure distributions on immersed bodies within a vorticity-based method and present a novel control volume formulation for recovering aerodynamic moments from only the vorticity and velocity fields. The method achieves second order spatial accuracy and third order temporal accuracy, and is validated on a variety of 2D flows in internal and free-space domains.

97 MATHEMATICS AND COMPUTING↗