Results for “target variability” — Page 87

NASA NTRS2004

Volcanic Activity at Tvashtar Catena, Io

Tvashtar Catena (63 N, 120 W) is one of the most interesting features on Io. This chain of large paterae (caldera-like depressions) has exhibited highly variable volcanic activity in a series of observations. Tvashtar is the type example of a style of volcanism seen only at high latitudes, with short-lived Pele-type plumes and short-lived by intense thermal events. Evidence for a hot spot at Tvashtar was first detected in an eclipse observation in April 1997 (orbit G7) by the Solid State Imager (SSI) on the Galileo Spacecraft. Tvashtar was originally targeted for observation at higher resolution in the close flyby in November 1999 (I25) because of its interesting large-scale topography. There are relatively few but generally larger paterae at high latitudes on Io. I25 images revealed a 25 km long, 1-2 km high lava curtain via a pattern of saturation and bleeding in the CCD image, which requires very high temperatures.

Milazzo, M. P.↗

NASA NTRSDate not supplied

A Human-in-the-Loop Evaluation of ACAS Xu

As part of the Phase 2 UAS DAA MOPS, a Class 3 DAA system has been under development with the potential to resolve many of the limitations of Class 1 and 2 systems. A Class 3 system would combine the DAA and CA functions into a single, unified system, and would also extend the CA capabilities relative to TCAS II. Class 3 is enabled by the Airborne Collision Avoidance System (ACAS) XU, a next generation CA system developed specifically for UAS operations. Unlike Class 2 systems, ACAS XU provides CA protection against both cooperative and non-cooperative traffic. Class 3 systems also expand the CA logic to allow horizontal RAs in addition to vertical RAs. The purpose of the current study was to evaluate ACAS XU in a real-time, HITL simulation. The latest version of ACAS XU was implemented and pilots were tasked with responding to scripted traffic conflicts over the course of four experimental trials. Variables included the location of the ACAS XU guidance information (standalone vs. integrated) and traffic conflict type (DAA or CA threat). Sixteen active UAS pilots participated in the study, with ATC and ‘pseudo’ pilots acting as airspace confederates. Results showed that pilots were able to maintain DWC with ACAS XU at a rate comparable to previous research (~5%). Compliance rates to initial RAs were high (~90%) but dropped significantly when the target heading value issued during horizontal RAs were updated over the course of an encounter (30-70%). The implications of these findings on the display, alerting, and guidance requirements for Class 3 systems will be discussed.

unmanned aircraft systems↗

NASA NTRSDate not supplied

A Human-in-the-Loop Evaluation of ACAS Xu

As part of the Phase 2 UAS DAA MOPS, a Class 3 DAA system has been under development with the potential to resolve many of the limitations of Class 1 and 2 systems. A Class 3 system would combine the DAA and CA functions into a single, unified system, and would also extend the CA capabilities relative to TCAS II. Class 3 is enabled by the Airborne Collision Avoidance System (ACAS) XU, a next generation CA system developed specifically for UAS operations. Unlike Class 2 systems, ACAS XU provides CA protection against both cooperative and non-cooperative traffic. Class 3 systems also expand the CA logic to allow horizontal RAs in addition to vertical RAs. The purpose of the current study was to evaluate ACAS XU in a real-time, HITL simulation. The latest version of ACAS XU was implemented and pilots were tasked with responding to scripted traffic conflicts over the course of four experimental trials. Variables included the location of the ACAS XU guidance information (standalone vs. integrated) and traffic conflict type (DAA or CA threat). Sixteen active UAS pilots participated in the study, with ATC and ‘pseudo’ pilots acting as airspace confederates. Results showed that pilots were able to maintain DWC with ACAS XU at a rate comparable to previous research (~5%). Compliance rates to initial RAs were high (~90%) but dropped significantly when the target heading value issued during horizontal RAs were updated over the course of an encounter (30-70%). The implications of these findings on the display, alerting, and guidance requirements for Class 3 systems will be discussed.

unmanned aircraft systems↗

NASA NTRS2020

A Human-in-theLoop Evaluation of ACAS Xu

As part of the Phase 2 UAS DAA MOPS, a Class 3 DAA system has been under development with the potential to resolve many of the limitations of Class 1 and 2 systems. A Class 3 system would combine the DAA and CA functions into a single, unified system, and would also extend the CA capabilities relative to TCAS II. Class 3 is enabled by the Airborne Collision Avoidance System (ACAS) XU, a next generation CA system developed specifically for UAS operations. Unlike Class 2 systems, ACAS XU provides CA protection against both cooperative and non-cooperative traffic. Class 3 systems also expand the CA logic to allow horizontal RAs in addition to vertical RAs. The purpose of the current study was to evaluate ACAS XU in a real-time, HITL simulation. The latest version of ACAS XU was implemented and pilots were tasked with responding to scripted traffic conflicts over the course of four experimental trials. Variables included the location of the ACAS XU guidance information (standalone vs. integrated) and traffic conflict type (DAA or CA threat). Sixteen active UAS pilots participated in the study, with ATC and ‘pseudo’ pilots acting as airspace confederates. Results showed that pilots were able to maintain DWC with ACAS XU at a rate comparable to previous research (~5%). Compliance rates to initial RAs were high (~90%) but dropped significantly when the target heading value issued during horizontal RAs were updated over the course of an encounter (30-70%). The implications of these findings on the display, alerting, and guidance requirements for Class 3 systems will be discussed.

unmanned aircraft systems↗

DOE OSTI2014

Disk-loss and disk-renewal phases in classical Be stars. II. Contrasting with stable and variable disks

Recent observational and theoretical studies of classical Be stars have established the utility of polarization color diagrams (PCDs) in helping to constrain the time-dependent mass decretion rates of these systems. We expand on our pilot observational study of this phenomenon, and report the detailed analysis of a long-term (1989-2004) spectropolarimetric survey of nine additional classical Be stars, including systems exhibiting evidence of partial disk-loss/disk-growth episodes as well as systems exhibiting long-term stable disks. After carefully characterizing and removing the interstellar polarization along the line of sight to each of these targets, we analyze their intrinsic polarization behavior. We find that many steady-state Be disks pause at the top of the PCD, as predicted by theory. We also observe sharp declines in the Balmer jump polarization for later spectral type, near edge-on steady-state disks, again as recently predicted by theory, likely caused when the base density of the disk is very high, and the outer region of the edge-on disk starts to self absorb a significant number of Balmer jump photons. The intrinsic V-band polarization and polarization position angle of γ Cas exhibits variations that seem to phase with the orbital period of a known one-armed density structure in this disk, similar to the theoretical predictions of Halonen and Jones. We also observe stochastic jumps in the intrinsic polarization across the Balmer jump of several known Be+sdO systems, and speculate that the thermal inflation of part of the outer region of these disks could be responsible for producing this observational phenomenon. Finally, we estimate the base densities of this sample of stars to be between ≈8 × 10{sup –11} and ≈4 × 10{sup –12} g cm{sup –3} during quasi steady state periods given there maximum observed polarization.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2018

Influence of school environments on childhood obesity in California

Highlights: • Of the school environment variables, social more than built factors influenced obesity. • Violent crime, language, socioeconomic disadvantage were among the leading social factors. • Distance to the nearest highway and greenness were among the leading built factors. • Having credentialed teachers and participating in PE are modifiable risk factors. • School social environment can be important for public health tracking of childhood obesity. To conduct a state-wide examination of public schools and the school neighborhood as potential targets for environmental public health tracking to address childhood obesity.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2014

SU-E-T-319: The Effect of Slice Thickness On IMRT Planning

Purpose: The accuracy of volume estimated of a treatment planning system is investigated in this study. In addition, the effect of slice thickness on IMRT planning is also studied. Methods: The accuracy in volume determination was investigated using a water phantom containing various objects with known volumes ranging from 1–100cm{sup 3}. The phantom was scanned with different slice thickness (1–10 mm). The CT data sets were sent to Eclipse TPS for contour delineation and volume calculation. The effect of slice thickness on IMRT planning was studied using a commercial phantom containing four different shaped objects. The phantom was scanned with different slice thickness (1–5 mm). IMRT plans were generated for the different CT datasets to calculate TCP, homogeneity (HI) and conformity indices (CI). Results: The variability of volumes with CT slice thickness was significant especially for small volume structures. The minimum and maximum error in the volume estimation is in the range of −2.3% to 92%. On the other hand, with increasing slice thickness, the PTV mean dose and TCP values decreases. Maximum variation of ∼5% was observed in mean dose and ∼2% in TCP with slice thickness change from 1–5 mm. The relative decrease in target volume receiving 95% of prescribed dose is ∼5% slice thickness change from 1–5 mm. HI increases up to 163% and CI decreases by 4% between 1–5 mm slice thickness change, producing highly inhomogeneous and least conformal plan. Conclusion: Accuracy of volume estimation is dependent on CT slice thickness and the contouring algorithm in a TPS. During TPS commissioning and for all clinical protocols, evaluation of volume should be included to provide the limit of accuracy in DVH calculation. A smaller slice thickness provides superior dosimetry with improved TCP values. Thus, the smallest possible slice thickness should be used for IMRT planning.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2013

Genome Variations Associated with Viral Susceptibility and Calcification in Emiliania huxleyi

Emiliania huxleyi, a key player in the global carbon cycle is one of the best studied coccolithophores with respect to biogeochemical cycles, climatology, and host-virus interactions. Strains of E. huxleyi show phenotypic plasticity regarding growth behaviour, light-response, calcification, acidification, and virus susceptibility. This phenomenon is likely a consequence of genomic differences, or transcriptomic responses, to environmental conditions or threats such as viral infections. We used an E. huxleyi genome microarray based on the sequenced strain CCMP1516 (reference strain) to perform comparative genomic hybridizations (CGH) of 16 E. huxleyi strains of different geographic origin. We investigated the genomic diversity and plasticity and focused on the identification of genes related to virus susceptibility and coccolith production (calcification). Among the tested 31940 gene models a core genome of 14628 genes was identified by hybridization among 16 E. huxleyi strains. 224 probes were characterized as specific for the reference strain CCMP1516. Compared to the sequenced E. huxleyi strain CCMP1516 variation in gene content of up to 30 percent among strains was observed. Comparison of core and non-core transcripts sets in terms of annotated functions reveals a broad, almost equal functional coverage over all KOG-categories of both transcript sets within the whole annotated genome. Within the variable (non-core) genome we identified genes associated with virus susceptibility and calcification. Genes associated with virus susceptibility include a Bax inhibitor-1 protein, three LRR receptor-like protein kinases, and mitogen-activated protein kinase. Our list of transcripts associated with coccolith production will stimulate further research, e.g. by genetic manipulation. In particular, the V-type proton ATPase 16 kDa proteolipid subunit is proposed to be a plausible target gene for further calcification studies.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1973

Field studies in support of Nimbus-E surface composition mapping radiometer

If the outputs of the two channels are spacially registered and combined to generate a third variable which reflects the differences between the two outputs, then this variable can then be redisplayed in image form and its magnitude should be relatable to the silica content of the rocks imaged. Two methods were proposed for generating this third variable, the first is to take the difference in apparent temperature between the two channels and the second is to ratio the voltage outputs of the two channels. The responses of the two channel high resolution surface composition mapping radiometer and the thermal channels of the MSDS scanner were calculated from data recorded with the NASA IR pallet and simulate the output of these systems had they been flying over the same targets as the IR pallet.

Lyon, R. J. P.↗

NASA NTRS2003

The Neptune/Triton Explorer Mission: A Concept Feasibility Study

Technological advances over the next 10 to 15 years promise to enable a number of smaller, more capable science missions to the outer planets. With the inception of miniaturized spacecraft for a wide range of applications, both in large clusters around Earth, and for deep space missions, NASA is currently in the process of redefining the way science is being gathered. Technologies such as 3-Dimensional Multi-Chip Modules, Micro-machined Electromechanical Devices, Multi Functional Structures, miniaturized transponders, miniaturized propulsion systems, variable emissivity thermal coatings, and artificial intelligence systems are currently in research and development, and are scheduled to fly (or have flown) in a number of missions. This study will leverage on these and other technologies in the design of a lightweight Neptune orbiter unlike any other that has been proposed to date. The Neptune/Triton Explorer (NExTEP) spacecraft uses solar electric earth gravity assist and aero capture maneuvers to achieve its intended target orbit. Either a Taurus or Delta-class launch vehicle may be used to accomplish the mission.

Esper, Jaime↗

NASA NTRS2012

Relationship Between Iron Valence States of Serpentine in CM Chondrites and Their Aqueous Alteration Degrees

The 0.6-0.7 micron absorption band observed for C-type asteroids is caused by the presence of Fe(3+) in phyllosilicates . Because Fe-bearing phyllosilicates, especially serpentine, are the most dominant product of aqueous alteration in the most abundant carbonaceous chondrites, CM chondrites, it is important to understand the crystal chemistry of serpentine in CM chondrites to better understand spectral features of C-type asteroids. CM chondrites show variable degrees of aqueous alteration, which should be related to iron valences in serpentine. It is predicted that the Fe(3+)/Sum of (Fe) ratios of serpentine in CM chondrites decrease as alteration proceeds by Si and Fe(3+) substitutions from end-member cronstedtite to serpentine, which should be apparent in the absorption intensity of the 0.6-0.7 micron band from C-type asteroids. In fact, the JAXA Hayabusa 2 target (C-type asteroid: 1993 JU3) exhibits heterogeneous spectral features (0.7 micron absorption band disappears by rotation). From these points of view, we have analyzed iron valences of matrix serpentine in several CM chondrites which span the entire observed range of aqueous alteration using Synchrotron Radiation X-ray Absorption Near-Edge Structure (SR-XANES). In this abstract we discuss the relationship between obtained Fe(3+)/Sum of (Fe) ratios and alteration degrees by adding new data to our previous studies

Mikouchi, T.↗

NASA NTRS2017

SMAP Level 4 Surface and Root Zone Soil Moisture

The SMAP Level 4 soil moisture (L4_SM) product provides global estimates of surface and root zone soil moisture, along with other land surface variables and their error estimates. These estimates are obtained through assimilation of SMAP brightness temperature observations into the Goddard Earth Observing System (GEOS-5) land surface model. The L4_SM product is provided at 9 km spatial and 3-hourly temporal resolution and with about 2.5 day latency. The soil moisture and temperature estimates in the L4_SM product are validated against in situ observations. The L4_SM product meets the required target uncertainty of 0.04 m(exp. 3)m(exp. -3), measured in terms of unbiased root-mean-square-error, for both surface and root zone soil moisture.

SMAP↗

DOE OSTI2020

Adaptive Neuro Fuzzy Inference System for Cyber-Intrusion Detection in a Smart Grid

The evolution of the power grid has brought increasing deployment of advance metering infrastructure, penetration of intelligent electronic devices, and integration of physical power system components with information and communications technologies. With the fast-expanding connectivity, cyber vulnerabilities arise due to the use of internet-based communication systems. These systems are targets of cyber-intrusions which attempt to disturb the normal power system functions. Traditional intrusion detection algorithms have been developed without an explicit model of the cyber components. In this paper, an algorithm to detect false data injections in the power system is proposed considering both cyber and physical models of the power system. The algorithm is based on an Adaptive Neuro Fuzzy Inference System (ANFIS) which collects information from state variables of the cyber-physical system to meet the performance requirements of the grid. Simulations of the proposed approach using the IEEE 13-bus test system validate the effectiveness of this artificial intelligence-based algorithm.

Adaptive Neuro Fuzzy Inference System (ANFIS), cyb↗

DOE OSTI2020

Identification of major moisture sources across the Mediterranean Basin

We employ a Lagrangian based moisture back trajectory method on an ensemble of four reanalysis datasets to provide a comprehensive understanding of moisture sources over the Mediterranean land region (30° N–49.5° N and 9.75° W–61.5° E) at seasonal timescales for 1980–2013 period. Using a source region between 10° S–71.35° N along the latitude and 80° W–84.88° E along the longitude that is subdivided into ten complimentary sub-regions, our analyses is able to backtrack up to > 90% of seasonal precipitation at each grid point within the target region. Our results indicate a significant role of moisture advected from the North Atlantic and Mediterranean Sea, and locally recycled moisture over the target region in shaping the spatial organization of seasonal precipitation. However, a clear east–west contrast is witnessed in determining the relative importance of each of these major moisture sources where the North Atlantic dictates the moisture supply over the western Mediterranean while moisture from Mediterranean Sea and local recycling play a key role over the eastern Mediterranean. Our analyses also demonstrate a major footprint of the North Atlantic Oscillation (NAO) on precipitation variability over the Mediterranean land as dynamic and thermodynamic anomalies during the negative phase of NAO match with those during wet years and vice versa. The findings reported here are generally consistent across the four reanalysis datasets. Overall, this study establishes the relative roles of adjacent and far-off oceanic and terrestrial evaporative sources over the Mediterranean land and should help in understanding the drivers of precipitation variability and change at varying timescales.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Integrated fluorescence light microscopy-guided cryo-focused ion beam-milling for in situ montage cryo-ET

Cryogenic-electron tomography (cryo-ET) permits the in situ visualization of biological macromolecules at the molecular level. Owing to the variable thickness of cells, tissues and organisms, frozen specimens may need to be thinned by cryo-focused ion beam (FIB) milling to produce thin (<500 nm) cryo-lamellae suitable for cryo-ET. Locating regions of interest remains a challenge because untargeted milling can lead to inadvertent ablation and removal of regions of interest. Correlative light and electron microscopy, combined with cryo-FIB milling, can guide the identification of labeled targets in the cellular milieu. Multiple transfers between cryo-imaging instruments, cumbersome correlation algorithms, limited accuracy and low throughput have hindered the routine adoption of cryo-FIB milling within a multimodal correlative workflow for in situ structural biology. Here, in this study, we present a workflow for 3D correlative cryo-fluorescence light microscopy-FIB-ET that streamlines fluorescence light microscopy-guided FIB milling, improving throughput while preserving both structural and contextual information. The complete integration of hardware and software described here minimizes sample contamination from cross-platform exchanges and greatly enhances the efficiency of 3D targeting in cryo-milling. We then describe procedures for implementing montage parallel array cryo-ET (MPACT), which can be easily adapted to any modern life-science transmission electron microscope. MPACT supports high-throughput cryo-ET acquisitions (10 tilt series in 1.5 h) for structure determination and comprehensive contextual understanding of macromolecules within their native surroundings. A complete session from sample preparation to MPACT data processing takes 5−7 d for an individual experienced in both cryo-EM and cryo-FIB milling.

Yang, Jie E. [Univ. of Wisconsin, Madison, WI (Uni↗

DOE OSTI2020

The Impacts of Horizontal Grid Spacing and Cumulus Parameterization on Subseasonal Prediction in a Global Convection-Permitting Model

Monthlong simulations targeting four Madden–Julian oscillation events made with several global model configurations are verified against observations to assess the roles of grid spacing and convective parameterization on the representation of tropical convection and midlatitude forecast skill. Specifically, the performance of a global convection-permitting model (CPM) configuration with a uniform 3-km mesh is compared to that of a global 15-km mesh with and without convective parameterization, and of a variable-resolution “channel” simulation using 3-km grid spacing only in the tropics with a scale-aware convection scheme. It is shown that global 3-km simulations produce realistic tropical precipitation statistics, except for an overall wet bias and delayed diurnal cycle. The channel simulation performs similarly, although with an unrealistically higher frequency of heavy rain. The 15-km simulations with and without cumulus schemes produce too much light and heavy tropical precipitation, respectively. Without convection parameterization, the 15-km global model produces unrealistically abundant, short-lived, and intense convection throughout the tropics. Only the global CPM configuration is able to capture eastward-propagating Madden–Julian oscillation events, and the 15-km runs favor stationary or westward-propagating convection organized at the planetary scale. The global 3-km CPM exhibits the highest extratropical forecast skill aloft and at the surface, particularly during week 3 of each hindcast. Although more cases are needed to confirm these results, this study highlights many potential benefits of using global CPMs for subseasonal forecasting. Furthermore, results show that alternatives to global convection-permitting resolution—using coarser or spatially variable resolution—feature compromises that may reduce their predictive performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Development of scalable design optimization parameters for bi-component protective systems

Bi-component protection-systems need to withstand a variety of extreme loading conditions such as high-velocity projectile impact to shock and blast mitigation. The large number of parameters at each stage of bi-component protection system design process results in a near-infinite number of possible variables for optimization. The aim of this project is to identify the scaling laws linking material and geometric scales of the problem to the final impact performance, further including the effects of wave propagation/interaction and inter-component bonding. Specifically, the impact dynamics for different optimal projectile/target density ratios and relative component mass fractions are quantified for bonded ceramic/titanium alloy systems. The impact behavior such as wave mechanics and damage propagation within the target system is characterized and quantified via digital image correlation or via x-ray phase-contrast imaging.

36 MATERIALS SCIENCE↗

DOE OSTI2020

An updated estimate of the Mu2e experiment sensitivity

The Mu2e experiment at Fermilab will search for the conversion of a negative muon into an electron inside the field of a nucleus. This process does not conserve charged-lepton flavour and is heavily suppressed in the Standard Model (SM), with a branching ratio < 10-50. Any evidence of it would be an undeniable evidence of new physics beyond the SM. The project sets out to achieve a single event sensitivity of $\sim 3 × 10^{-17}$ on the ratio between the probability for a conversion of a negative muon into an electron and the one for a muon capture by the nucleus. Such a sensitivity would represent a 4 orders of magnitude improvement on the previous upper limit for the process, making possible to test predictions of different extensions of the SM. Mu2e uses three superconducting solenoids to produce and measure the muon conversions. In the first solenoid, the Production Solenoid, pions and kaons are produced, together with other secondary products, by 8 GeV kinetic energy proton interactions in a tungsten target. A gradient magnetic field is specifically designed to direct low momentum particles into the Transport Solenoid, an S-shaped magnet that filters out particles with unwanted charge and momentum. Muons, produced by pion and kaon decays, finally reach the aluminum Stopping Target in the Detector Solenoid, where they eventually stop and convert. The result of the conversion process is a monochromatic electron of ~105 MeV/c momentum. The Detector Solenoid also hosts the two main detectors: a straw tube tracker and two CsI calorimeter disks, both providing measurement of event kinematics. A germanium detector and a LaBr crystal are located downstream of the Detector Solenoid to measure the X and gamma rays produced by the muon captures in the Stopping Target. A veto system of scintillators covering the Detector Solenoid and half of the Transport Solenoid is used to identify and reject cosmic rays interactions. With respect to the initial project, the Mu2e running plan has evolved to a staged configuration with 2 years at reduced intensity before the 2025 accelerator shutdown for the neutrino beam upgrade and 2 or 3 years at full intensity after that. This, together with geometry changes and a better knowledge of detector performances obtained by the first slice tests, has required a full revision of the signal over background selection that is the subject of this thesis. In order to achieve a new estimate of Mu2e sensitivity, the simulation of the data corresponding to the first 2 years of data acquisition has been performed. This includes both conversion electrons (CE) and the main sources of background: cosmics, decay-in orbits (DIO), radiative pion captures (RPC) and antiprotons. The characteristics of the signal and of the main backgrounds have been studied to define the best selection variables for CE. A special effort has been devoted to the evaluation of the antiproton background. The lack of experimental data for antiproton production cross section makes the systematic uncertainty on this background significant. A new parameterization of the cross section has been developed to fit the existing data and to provide a more reliable estimate of the systematic uncertainty by comparing the results of the old and the new model. A special effort has been devoted to the optimization of the antiprotons Monte Carlo generator. This study has also revealed that the dominant component within this background is represented by antiprotons produced in the opposite direction with respect to the Transport Solenoid entrance and then redirected to it by back-scattering processes in the Production Target. This ultimately highlights the sensitivity of the background estimate to the G4 handling of antiproton interactions in the 1 to 3 GeV/c momentum range. Finally, the final experimental sensitivity has been studied. The momentum and time selection have been optimized to obtain the 5-sigma discovery reach or, in case of no signal, the upper limit on conversion probability. The results confirm that, in the firs t two years of data taking, Mu2e will be able to improve the current experimental sensitivity for muon-to-electron conversion in an atomic field by more than 3 order of magnitudes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗