Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

The SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) Product

The Soil Moisture Active and Passive (SMAP) mission is being developed by NASA for launch in 2013 as one of four first-tier missions recommended by the U.S. National Research Council Committee on Earth Science and Applications from Space in 2007. The primary science objectives of SMAP are to enhance understanding of land surface controls on the water, energy and carbon cycles, and to determine their linkages. Moreover, the high resolution soil moisture mapping provided by SMAP has practical applications in weather and seasonal climate prediction, agriculture, human health, drought and flood decision support. In this paper we describe the assimilation of SMAP observations for the generation of the planned SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) product. The SMAP mission makes simultaneous active (radar) and passive (radiometer) measurements in the 1.26-1.43 GHz range (L-band) from a sun-synchronous low-earth orbit. Measurements will be obtained across a 1000 km wide swath using conical scanning at a constant incidence angle (40 deg). The radar resolution varies from 1-3 km over the outer 70% of the swath to about 30 km near the center of the swath. The radiometer resolution is 40 km across the entire swath. The radiometer measurements will allow high-accuracy but coarse resolution (40 km) measurements. The radar measurements will add significantly higher resolution information. The radar is however very sensitive to surface roughness and vegetation structure. The combination of the two measurements allows optimal blending of the advantages of each instrument. SMAP directly observes only surface soil moisture (in the top 5 cm of the soil column). Several of the key applications targeted by SMAP, however, require knowledge of root zone soil moisture (approximately top 1 m of the soil column), which is not directly measured by SMAP. The foremost objective of the SMAP L4_SM product is to fill this gap and provide estimates of root zone soil moisture that are informed by and consistent with SMAP observations. Such estimates are obtained by merging SMAP observations with estimates from a land surface model in a soil moisture data assimilation system. The land surface model component of the assimilation system is driven with observations-based surface meteorological forcing data, including precipitation, which is the most important driver for soil moisture. The model also encapsulates knowledge of key land surface processes, including the vertical transfer of soil moisture between the surface and root zone reservoirs. Finally, the model interpolates and extrapolates SMAP observations in time and in space. The L4_SM product thus provides a comprehensive and consistent picture of land surface hydrological conditions based on SMAP observations and complementary information from a variety of sources. The assimilation algorithm considers the respective uncertainties of each component and yields a product that is superior to satellite or model data alone. Error estimates for the L4_SM product are generated as a by-product of the data assimilation system.

Reichle, Rolf↗
NASA NTRS2012

Overview of Photocatalysis, Photocatalytic Surface Materials Studies, and Demonstration of Self-Cleaning Materials for Space and Terrestrial Based Applications at the Infinity Science Center at NASA Stennis Space Center

Research into photocatalytic technology has been progressing for over three decades in the early 1990s Japanese and European companies initiate research into photocatalytic technology. In the 1996 specific focus on the technology with the first large-scale application: the construction of a church in Rome (Jubilee Church). And in 2000 Europe and Japan research into the benefits of photocatalytic technology. Currently, photocatalytic technology continues to improve, and with time development is becoming more efficient and effective. What is Photocatalysis? Photo: phenomenon induced by the light, having specifically a wavelength around 320-400 nm (artificial or natural sunlight). Catalyst: a material that induces a reaction but is not consumed or transformed by it. The catalyst remains constantly available. In this case, the catalyst is made with nano-particles of titanium oxide (Ti02).

Underwood, Lauren W.↗
DOE OSTI2023

Continuous observations of the surface energy budget and meteorology over the Arctic sea ice during MOSAiC

Abstract The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) was a yearlong expedition supported by the icebreaker R/V Polarstern , following the Transpolar Drift from October 2019 to October 2020. The campaign documented an annual cycle of physical, biological, and chemical processes impacting the atmosphere-ice-ocean system. Of central importance were measurements of the thermodynamic and dynamic evolution of the sea ice. A multi-agency international team led by the University of Colorado/CIRES and NOAA-PSL observed meteorology and surface-atmosphere energy exchanges, including radiation; turbulent momentum flux; turbulent latent and sensible heat flux; and snow conductive flux. There were four stations on the ice, a 10 m micrometeorological tower paired with a 23/30 m mast and radiation station and three autonomous Atmospheric Surface Flux Stations. Collectively, the four stations acquired ~928 days of data. This manuscript documents the acquisition and post-processing of those measurements and provides a guide for researchers to access and use the data products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Generalized synthesis of high surface area mesoporous metal titanates as efficient heterogeneous catalysts

A novel metal dissolution coupled with reverse micelle formation approach is used as a generalized synthesis method for a series of high surface area metal titanates where the metals used are Bi, Mg, V, Mn, Fe, Co, Ni, Cu, Zn, Mo, W, and Ce. This study reports the highest surface areas published so far. The homogeneous distributions of the metals and titanium are observed in SEM-EDX and TEM mapping. The synthesized materials were comprehensively characterized using PXRD, Raman, nitrogen adsorption isotherms, SEM; EDX, TEM, TEM mapping, TGA, and XPS. The green catalytic oxidation of aniline to nitrosobenzene occurs within 30 min at room temperature when mesoporous W/Ti binary metal oxide is used as the catalyst. The radical mediated catalytic reaction gives excellent yields and the catalyst is reusable up to 4 reaction cycles without losing significant activity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Recent Widespread Deceleration of Global Surface Urban Heat Islands Unveiled by Satellites

Tracking the temporal dynamics of urban heat island (UHI) is critical for urban heat adaptation and mitigation strategies. However, whether UHI trends have shifted recently and their underlying drivers remain unknown. Here we investigate the variabilities in surface UHI trends and their associated determinants in 2,104 cities worldwide from 2000 to 2022. Our findings reveal that approximately half of the world's cities have experienced notable shifts in surface UHI trends, predominantly characterized by UHI deceleration. These shifts can be primarily attributed to alterations in vegetation trends during the day and to modifications in surface albedo and local warming trends at night. Our study challenges the conventional linear models commonly employed to estimate surface UHI trends, suggesting potential biases in such estimates. Our findings underscore the need for nuanced policies to curtail UHI growth by considering changes in urban underlying surfaces and background climate, particularly from a nonlinear perspective.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1999

Hubble Space Telescope: Servicing Mission 3A. Media Reference Guide

Since its launch in April 1990, the Hubble Space Telescope (HST) has provided scientific data and images of unprecedented resolution from which many new and exciting discoveries have been made. The Telescope's purpose is to spend 20 years probing the farthest and faintest reaches of the cosmos. Crucial to fulfilling this objective is a series of on-orbit manned servicing missions. The First Servicing Mission (SM1) took place in December 1993 and the Second Servicing Mission (SM2) was flown in February 1997. During these missions, astronauts perform planned repairs and maintenance activities to restore and upgrade the observatory s capabilities. To facilitate this process, the Telescope s designers configured science instruments and several vital engineering subsystems as Orbital Replacement Units (ORU) -- modular packages with standardized fittings accessible to astronauts in pressurized suits. Hubble's Third Servicing Mission has been separated into two parts: Servicing Mission 3A (SM3A) will fly in Fall of 1999 and Servicing Mission 3B (SM3B) is planned for 2001. The principal objective of SM3A is to replace all six gyroscopes that compose the three Rate Sensor Units (RSU). In addition, space-walking astronauts will install a new Advanced Computer that will dramatically increase the computing power, speed, and storage capability of HST. They will change out one of the Fine Guidance Sensors (FGS) and replace a tape recorder with a new Solid State Recorder (SSR). The Extravehicular Activity (EVA) crew also will install a new S-band Single-Access Transmitter (SSAT), and Voltage/Temperature Improvement Kits (VIK) for the Telescope s nickel-hydrogen batteries. Finally, they will begin repair of the multilayer insulation on Hubble s outer surface. During SM3B astronauts will install a new science instrument, the Advanced Camera for Surveys (ACS), and an Aft Shroud Cooling System (ASCS) for the other axial science instruments. They will attach a new cryogenic cooler to the Near-Infrared Camera and Multi-Object Spectrometer (NICMOS). They also will replace the HST flexible Solar Arrays with new high-performance rigid arrays.

FROM↗
NASA NTRS2017

The Mars Reconnaissance Orbiter Mission: Continuing a Record of Exploration from Mars Orbit

The Mars Reconnaissance Orbiter (MRO) has been on station in its low altitude, sun-synchronous, primary science orbit since September 2006 performing both scientific and Mars programmatic support functions. The spacecraft is a very capable remote sensing science platform carrying six science payloads supporting seven investigations and a UHF telecommunications radio (Electra) for surface relay. Developed to support a mix of nadir mapping and targeted, highresolution surface observations, the spacecraft’s powerful telecommunications and command & data handling (C&DH) subsystems communicate an average of 16 hours a day with the Deep Space Network (DSN). To date, more than 300 TB of scientific data has been returned to Earth. All of the original science payloads are active with standard and new observing modes contributing to the advancement of Mars science through peer-reviewed paper publications and the timely dissemination of their data to the science community as a whole. Results from the science teams have revealed an amazing diversity of ancient aqueous environments and ongoing surface change is evident through gully formation, avalanches, and cratering. Extending the MRO-MGS climate record to a decade of Mars years is contributing to a better understanding of current atmospheric and polar processes. In addition to its fundamental scientific objectives, MRO is a critical element of NASA’s Mars Exploration Program (MEP) providing needed infrastructure support for landed and future missions. Using its Electra telecommunications payload, MRO provides landers and rovers critical event coverage during their entry, descent, and landing (EDL) phases and UHF relay support once they are on the Martian surface. MRO’s high-resolution imagers are used to scout potential landing sites and certify safe zones for landing. As MRO begins its Fourth Extended Mission, the spacecraft remains fully capable of carrying out an ambitious science observing plan and the programmatic tasks assigned to it. In addition to highlighting recent discoveries of the mission, this paper describes recent challenges the spacecraft engineers have faced in flight and the plans for extending spacecraft life well into the 2020’s.

Tamppari, Leslie K.↗
NASA NTRS1983

1983 International Geoscience and Remote Sensing Symposium (IGARSS '83), San Francisco, CA, August 31-September 2, 1983, Digest. Volumes 1 & 2

Various papers on remote sensing are presented. The general topics addressed include: remote sensing of the biosphere, geophysical inversion, science and archaeology, image processing, sensing the atmosphere with microwaves, analysis of scattering for remote sensing, advanced sensors and technology, archaeology, data processing, fiber optics, Landsat-4 and TM. Also discussed are: remote sensing and microwave instrumentation, soil moisture and hydrology, measurement techniques for ocean surface waves, geological remote sensing, radar millimeter wave propagation through the atmosphere, and remote sensing in planetary science, geophysics, hydrology, oceanography, and surface vegetation.

Source record↗
NASA NTRS2004

Evolution of a Mars Airplane Concept for the ARES Mars Scout Mission

ARES (Aerial Regional-scale Environmental Survey of Mars) is a proposed Mars Scout mission using an airplane to provide high-value science measurements in the areas of atmospheric chemistry, surface geology and mineralogy, and crustal magnetism. The use of an airplane for robotic exploration of Mars has been studied for over 25 years. There are, however, significant challenges associated with getting an airplane to Mars and flying through the thin, carbon dioxide Martian atmosphere. The traditional wisdom for aircraft design does not always apply for this type of vehicle and geometric, aerodynamic, and mission constraints result in a limited feasible design space. The ARES airplane design is the result of a concept exploration and evolution involving a number of trade studies, downselects, and design refinements. Industry, university, and NASA partners initially proposed a number of different concepts, drawing heavily on past Mars airplane design experience. Concept downselects were conducted with qualitative evaluation and high level analyses, focused on the most important parameters for the ARES mission. Following a successful high altitude test flight of the basic configuration, additional design refinement led to the current design. The resulting Mars airplane concept enables the high-value science objectives of the ARES mission to be accomplished while also fulfilling the desire for a simple, low-risk design.

Smith, Stephen C.↗
DOE OSTI2025

Stemflow Hydrodynamics

Stemflow hydrodynamics is the study of water movement along the exterior surface area of plants. Its primary goal is to describe water velocity and water depth along the stem surface area. Its significance in enriching the rhizosphere with water and nutrients is not in dispute. Yet, the hydrodynamics of stemflow have been entirely overlooked. This review seeks to fill this knowledge gap by drawing from thin film theories to seek outcomes at the tree scale. The depth‐averaged conservation equations of water and solute mass are derived at a point. These equations are then supplemented with the conservation of momentum that is required to describe water velocities or relations between water velocities and water depth. Relevant forces pertinent to momentum conservation are covered and include body forces (gravitational effects), surface forces (wall friction), line forces (surface tension), and inertial effects. The inclusion of surface tension opens new vistas into the richness and complexity of stemflow hydrodynamics. Flow instabilities such as fingering, pinching of water columns into droplets, accumulation of water within fissures due to surface tension and their sudden release are prime examples that link observed spatial patterns of stemflow fronts and morphological characteristics of the bark. Aggregating these effects at the tree‐ and storm‐ scales are featured using published experiments. The review discusses outstanding challenges pertaining to stemflow hydrodynamics, the use of dynamic similarity and 3D printing to enable the interplay between field studies and controlled laboratory experiments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Texture Analysis of Inconel 718 with Different Modes During Single-Track Laser Surface Re-Melting

An in-depth understanding of the texture formation in melt pools allows for the modification of the surface layer microstructure and corresponding material properties, providing an opportunity to integrate laser surface re-melting into metal additive manufacturing. This study investigates crystallographic texture formation at different cooling rates in single melting tracks on the Inconel 718 (IN718) plate produced by laser surface re-melting. The cooling rate varies from 2.31 × 10 5 °C/s to 9.56 × 10 5 °C/s with the increase in scanning rates from 400 mm/s to 1200 mm/s, measured by recently developed real-time temperature monitoring of melt pools. Columnar grains are dominant, with distinct crystallographic textures forming in the melt pools. At a slower scanning speed, the keyhole mode shows three different textures forming at different depths (crystallographically layered structure), while, at a faster scanning speed, the conduction mode shows only random grain orientation. There are no pores/voids detected, and the columnar grain morphology and columnar grain width (8.6 μm to 12.4 μm) follow the analysis framework in terms of thermal gradient and solidification rate analysis. This implies that laser surface re-melting provides the potential to modify the surface structure from a random grain orientation to a crystallographically layered structure.

36 MATERIALS SCIENCE↗
NASA NTRS2002

The Focal Surface of EUSO Telescope

The Extreme Universe Space Observatory (EUSO) is a science mission under conceptual design for the detection of extremely high energy cosmic rays and neutrinos by the observation of time-resolved images of atmospheric fluorescence photons generated along the extensive air shower, in the near ultraviolet wavelength region. A refractive telescope with double-sided double Fresnel lens will be employed to achieve a large field of view of 60 degrees. The energy and arrival direction of the primary particles will be determined by observing the time evolution of the airshower. The focal surface of the EUSO telescope will be segmented to a few hundred thousand pixels to resolve the entire field of view with the angular resolution of the order of 0.1 degree. The time evolution will be observed with the time resolution of 0.8 microsecond. A large scale array of multianode photomultiplier (MAPMT) is being studied as the EUSO focal surface. The MAPMT array is capable of detecting near ultraviolet photons at single photoelectron level. In this contribution, we will report the present status of the focal surface design including the optimization of anode segmentation and the minimization of the dead area and discuss overall experimental performance in detecting extensive airshowers.

Shimizu, H. M.↗
NASA NTRS2008

Atmospheric Correction at AERONET Locations: A New Science and Validation Data Set

This paper describes an AERONET-based Surface Reflectance Validation Network (ASRVN) and its dataset of spectral surface bidirectional reflectance and albedo based on MODIS TERRA and AQUA data. The ASRVN is an operational data collection and processing system. It receives 50x50 square kilometer subsets of MODIS L1B data from MODAPS and AERONET aerosol and water vapor information. Then it performs an accurate atmospheric correction for about 100 AERONET sites based on accurate radiative transfer theory with high quality control of the input data. The ASRVN processing software consists of L1B data gridding algorithm, a new cloud mask algorithm based on a time series analysis, and an atmospheric correction algorithm. The atmospheric correction is achieved by fitting the MODIS top of atmosphere measurements, accumulated for 16-day interval, with theoretical reflectance parameterized in terms of coefficients of the LSRT BRF model. The ASRVN takes several steps to ensure high quality of results: 1) cloud mask algorithm filters opaque clouds; 2) an aerosol filter has been developed to filter residual semi-transparent and sub-pixel clouds, as well as cases with high inhomogeneity of aerosols in the processing area; 3) imposing requirement of consistency of the new solution with previously retrieved BRF and albedo; 4) rapid adjustment of the 16-day retrieval to the surface changes using the last day of measurements; and 5) development of seasonal back-up spectral BRF database to increase data coverage. The ASRVN provides a gapless or near-gapless coverage for the processing area. The gaps, caused by clouds, are filled most naturally with the latest solution for a given pixels. The ASRVN products include three parameters of LSRT model (k(sup L), k(sup G), k(sup V)), surface albedo, NBRF (a normalized BRF computed for a standard viewing geometry, VZA=0 deg., SZA=45 deg.), and IBRF (instantaneous, or one angle, BRF value derived from the last day of MODIS measurement for specific viewing geometry) for MODIS 500m bands 1-7. The results are produced daily at resolution of 1 km in gridded format. We also provide cloud mask, quality flag and a browse bitmap image. The new dataset can be used for a wide range of applications including validation analysis and science research.

Wang, Yujie↗
DOE OSTI2021

New Orthophoto Generation Strategies from UAV and Ground Remote Sensing Platforms for High-Throughput Phenotyping

Remote sensing platforms have become an effective data acquisition tool for digital agriculture. Imaging sensors onboard unmanned aerial vehicles (UAVs) and tractors are providing unprecedented high-geometric-resolution data for several crop phenotyping activities (e.g., canopy cover estimation, plant localization, and flowering date identification). Among potential products, orthophotos play an important role in agricultural management. Traditional orthophoto generation strategies suffer from several artifacts (e.g., double mapping, excessive pixilation, and seamline distortions). The above problems are more pronounced when dealing with mid- to late-season imagery, which is often used for establishing flowering date (e.g., tassel and panicle detection for maize and sorghum crops, respectively). In response to these challenges, this paper introduces new strategies for generating orthophotos that are conducive to the straightforward detection of tassels and panicles. The orthophoto generation strategies are valid for both frame and push-broom imaging systems. The target function of these strategies is striking a balance between the improved visual appearance of tassels/panicles and their geolocation accuracy. The new strategies are based on generating a smooth digital surface model (DSM) that maintains the geolocation quality along the plant rows while reducing double mapping and pixilation artifacts. Moreover, seamline control strategies are applied to avoid having seamline distortions at locations where the tassels and panicles are expected. The quality of generated orthophotos is evaluated through visual inspection as well as quantitative assessment of the degree of similarity between the generated orthophotos and original images. Several experimental results from both UAV and ground platforms show that the proposed strategies do improve the visual quality of derived orthophotos while maintaining the geolocation accuracy at tassel/panicle locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effect of surface disorder on the chiral surface states of a three-dimensional quantum Hall system

We investigate the effect of surface disorder on the chiral surface states of a three-dimensional quantum Hall system. Utilizing a transfer-matrix method, we find that the localization length of the surface state along the magnetic field decreases with the surface disorder strength in the weak disorder regime but increases anomalously in the strong disorder regime. In the strong disorder regime, the surface states mainly locate at the first inward layer to avoid the strong disorder in the outmost layer. The anomalous increase of the localization length can be explained by an effective model, which maps the strong disorder on the surface layer to the weak disorder on the first inward layer. Our work demonstrates that surface disorder can be an effective way to control the transport behavior of the surface states along the magnetic field. We also investigate the effect of surface disorder on the full distribution of conductances P(g) of the surface states in the quasi-one-dimensional (1D) regime for various surface disorder strengths. In particular, we find that P(g) is Gaussian in the quasi-1D metal regime and log-normal in the quasi-1D insulator regime. In the crossover regime, P(g) exhibits highly nontrivial forms, whose shapes coincide with the results obtained from the Dorokhov-Mello-Pereyra-Kumar equation of a weakly disordered quasi-1D wire in the absence of time-reversal symmetry. Our results suggest that P(g) is fully determined by the average conductance, independent of the details of the system, in agreement with the single-parameter scaling hypothesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1993

Lunar science strategy: Exploring the Moon with humans and machines

Important scientific questions that can be addressed from the lunar surface are reviewed for a number of scientific disciplines. A successful strategy for human exploration of the Moon is outlined. It consists of several elements: thorough preparation; a means of extending the human reach; measurement of the mobility of both human and robotic components; and flexible technologies so as to be able to take the most effective path as successive decision points occur. Part of thorough preparation involves concurrent development of a set of science goals and objectives as well as a supporting information base; neither can evolve independently of the other. This matched set will drive the definition of missions and technologies used to satisfy the requirements of various science disciplines. No single site on the Moon will satisfy all requirements. Thus, global accessibility is a goal of the current Lunar and Mars Exploration Program science strategy. Human mobility on the surface is limited to a few kilometers without the use of vehicles. Unpressurized crew carrying rovers could take explorers to distances tens of kilometers from an outpost; the distance is primarily limited by health and safety concerns. Pressurized rovers could extend the range to hundreds of kilometers, but size, mass, and costs limit such vehicles to missions beyond current planning horizons. The establishment of several outposts instead of one would provide opportunities for effective use of the unique capabilities of humans. Extending the human reach to global dimensions may be accomplished through teleoperation or telepresence. The most effective mix of these techniques is a decision that will evolve as experience is gained on the surface. Planning and technology must be flexible enough to allow a variety of options to be selected.

Morrison, Donald A.↗
NASA NTRS2021

InSight Mars Lander Instrument Deployment Arm Flight Software

The Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander landed on Mars on November 26, 2018 and continues to investigate the internal structure of the planet two years later. The Instrument Deployment Arm (IDA), a robotic arm on the lander, was used to deploy the science instrument payloads from the lander deck to the surface of Mars and to take images of the lander and the surrounding environment. This was the first precision deployment and release by a robotic arm on another planet. After deploying the instruments, the IDA has been used for instrument commissioning, scientific data gathering, and to assist with troubleshooting one of the science instruments. This paper provides a high-level summary of the flight software that controls the IDA. The paper provides an overview of the IDA software interfaces, task structure, command handling strategy, motion specification, motion planning, motor control, grapple control, fault protection, and telemetry.

Ali, Khaled S.↗