Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sparse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Review of Advanced Test Reactor Fuel and Assessment of Its Compatibility with the ZIRCEX Chlorination Process

Advanced Test Reactor (ATR) fuel has been identified as a resource for high-assay low-enriched uranium (HALEU) production. A survey was performed on the published literature describing ATR fuel. The geometry of the fuel is complex; different parts of the fuel compact experience differing neutron flux and burnup. The literature is sparse, and access is controlled. Therefore, fundamental studies of fuel reprocessing must use a model fuel that represents the main chemical and structural features. Advanced chlorination, or chlorination with sulfur-chlorine bearing reagents is being investigated as way to separate the fuel from metal matrix alloys. A UAl x alloy will be fabricated with x = 3, 4, and 5. The potential chlorination of individual UAl x intermetallics will be assessed in the advanced chlorination process of Al-8001 and Al-6061 as well as a representative mixture. Initial studies will track the alloying elements of the Al, which are Si, Fe, Cu, Mn, Mg, Cr, Zn, and Ti, in addition to the U itself. Further studies will include fission product simulants. Because advanced chlorination solvents include sulfur, the chemistry of sulfur with major and minor constituents will also be investigated. The experimental work accompanied by neutronic calculations will allow the assessment of the feasibility of advanced chlorination to separate aluminum from uranium. If bench-scale testing appears promising, then small-scale tests in shielded facilities with irradiated cladding, lightly irradiated fuel, and spent nuclear fuel are recommended to track the complete inventory of fissile actinides, fission product impurities, and reagent solids and liquids.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Cloud and Precipitation Experiment at Kennaook (Cape-K) Science Plan

The Cloud and Precipitation Experiment at Kennaook (CAPE-K) will augment ongoing measurements at the Kennaook/Cape Grim Baseline Air Pollution Station (KCG) with components of the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s second Mobile Facility (AMF2) in a deployment that is scheduled to extend from April 2024 through September 2025. Located at Kennaook/Cape Grim on the northwestern tip of Tasmania (40.68° S, 144.69° E), KCG has produced the longest and most consequential record of Southern Hemisphere aerosol and gas-phase chemistry; however, extensive cloud and precipitation measurements have not been collected at this site. CAPE-K is motivated by the fact that model uncertainty in the surface radiation budget due to clouds and precipitation remain significant in this region, where strong latitudinal gradients in cloud feedbacks are found and there are strong and well-documented seasonal variations in marine aerosol properties. Satellite data suggest that cloud properties co-vary with the seasonal cycle in aerosol in the Southern Ocean (SO), yet detailed vertically resolved measurements of cloud and precipitation in the marine boundary layer are sparse. CAPE-K will provide the first such seasonal cycle of measurements in this important latitude band. CAPE-K will provide detailed cloud and precipitation observations over two winter seasons and align with complementary high-value-add activities planned by Australian colleagues, including a voyage of the Research Vessel Investigator (RVI) in May 2025 that will conduct measurements just offshore of KCG.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Adjoint Waveform Tomography for Crustal and Upper Mantle Structure the Middle East and Southwest Asia for Improved Waveform Simulations Using Openly Available Broadband Data

We present a new model of radially anisotropic seismic wavespeeds for the crust and upper mantle of a broad region of the Middle East and Southwest Asia (MESWA) derived from adjoint waveform tomography. We inverted waveforms from 192 Global Centroid Moment Tensor earthquakes (MW 5.5-7.0) recorded by over 1000 openly available broadband seismic stations from permanent and temporary networks in the region. Spatial coverage of the available data is highly uneven due to earthquakes clustered along plate boundaries and sparse coverage of open seismic networks in the region. We considered three possible starting models: the SPiRaL global model (Simmons et al., 2021); MEC-1 (Kaviani et al., 2020); and CSEM2.0 (Noe et al., 2023). Because the SPiRaL model provides good fits to the observed waveforms measured by the time-bandwidth product of selected windows in several period bands, provides all the necessary parameters and covers the entire domain we used it for the starting model with the period band 50-100 seconds. Inversion iterations proceeded using time-frequency phase misfits in six stages and 54 total iterations reducing the minimum period to 30 seconds. Our final model, MESWA, provides improved waveform fits compared to the starting model for both the data used in the inversion and an independent validation data set of 66 events. Two metrics of waveform fit (the time-frequency phase misfit used in the optimization and normalized L2 misfit) were both reduced by nearly 60% for both data sets and MESWA provides significantly larger misfit reductions relative to the SPiRaL model than the MEC-1 or CSEM models. We also find that MESWA provides a larger time-bandwidth product of selected windows indicating that more information content of the observed waveforms is explained by MESWA than the other models. Our new model reveals tectonic features imaged by other studies and methods but in a new holistic model of shear and compressional wavespeeds (v S and v P , respectively) with anisotropy covering the crust and uppermost mantle of a larger domain. MESWA has smaller scale-length features and tends to sharpen some features relative to the SPiRaL starting model. Examples include: low crustal v S in the TurkishIranian Plateau, Zagros Mountains, Afghan Central Blocks and Sulaiman Fold Belt; low mantle vSfollowing divergent (Gulf of Aden, Red Sea) and transform (Dead Sea Fault) margins of the Arabian Plate; low and high v S in the mantle beneath the Arabian Shield and Platform, respectively. Low vS is imaged below Cenozoic volcanic centers of the Arabian Peninsula, the so-called Mecca-Madina-Nafud (MMN) Line. Positive anisotropy (v SH > v SV ) is inferred for asthenospheric depths across the region except where up/downwelling may influence fabric alignment (e.g. Afar, Red Sea, Arabian Shield). Elevated vS tracks Makran subduction under southeast Iran. MESWA resembles the SPiRaL model in its long-wavelength structure, but enhances shorter wavelengths features on the order of 200 km and smaller. The resulting model could be used for as a starting model for further improvements, say using waveforms from in-country seismic networks that are not openly available or smaller-scale studies targeting shorter period waveforms. The model also could be used for source characterization and moment tensor inversion to improve earthquake hazard studies and nuclear explosion monitoring.

58 GEOSCIENCES↗
DOE OSTI2022

Applying 3D Geologic Modeling Workflows to the Argillite Reference Case (Rev. 1)

The objective of this short report is to document the application of our 3D geologic modeling workflow to an argillite (shale) host rock. Over the past four years, our team at Los Alamos National Laboratory has developed a geologic modeling workflow that can be applied to generic alluvial basins such as those found in the western United States. In “frontier” or “exploratory” basins where data are sparse, the first steps are to collect, evaluate and integrate available subsurface data into conceptual geologic models. Those models form the basis for constructing the geologic framework model, a 3D geocellular model ideally constrained by seismic and borehole data. To date we have constructed our models using “synthetic” well data derived from conceptual models, without the prospect of validating our workflow using “real” subsurface data. We were tasked to investigate whether our workflow designed for alluvial basin sediments could be applied to other potential repository host rocks. This task also provided the opportunity to work with high-quality subsurface data collected specifically for siting and evaluating a nuclear waste repository. Nagra, the Swiss governmental agency responsible for the disposal of the nation’s radioactive waste, generously provided us with data from two deep boreholes drilled through their argillaceous target formation. The aim of our proof-of-concept demonstration is to evaluate whether geostatistical methods offer a viable approach to property modeling in argillaceous rocks. Nagra provided us with the well data on the condition that we maintain confidentiality with all transferred information and results. Fortunately, Nagra posts numerous technical reports on its public website that describe the subsurface geology in great detail. All of the information and illustrations in this report related to the Swiss repository enterprise are taken from the Nagra public website.

58 GEOSCIENCES↗
DOE OSTI2023

Analyzing Complex Energy Security Systems [Slides]

Motivation: DOE is investing in our technology for improving Energy Security; Many of these problems are grand challenges requiring moonshot type efforts; The geoscience paradigm is shifting from data sparse to data rich requiring us to take advantage of the latest computational and AI to tools optimize these systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Nucleon-Pion Spectroscopy from Sparsened Correlators

Neutrino oscillation experiments require accurate reconstructions of neutrino energies, which depend in part on a theoretical understanding of the axial $N\rightarrow\Delta$ transition form factors. A lattice QCD study of this transition will require construction of all hadronic states with energies up to $m_\Delta$, which at the physical point includes $N\pi$ and $N\pi\pi$. Building interpolating operators from sparse grids at the source and sink is a versatile method that allows construction of a wide range of diagram topologies and has successfully been used in other multi-hadron calculations. We will discuss application of this method to nucleon-pion systems and present preliminary results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Rapidly Viable Sustained Grid

Rapid recovery of power flow, possibly after a blackout, is a crucial need arising in scenarios that are increasingly becoming more frequent; here, solutions for rapid viability of power while the grid is being restored are urgently needed to keep critical infrastructure (CI) online. Increasingly, after the initial recovery phase, sustenance of reliable power requires assistive services to the grid for long periods of time. Even though the need is urgent, there is only sparse effort present toward a comprehensive framework/strategy for making power rapidly viable with an emphasis on sustained grid ancillary services; which is the focus of this proposal. The proposed concept envisions four phases. In the first phase, when a large portion of power is disrupted (see Figure 1(a)), emphasis is on bringing CI online with the objective of maximizing the time horizon of power viability using resources available at the CI. In the second phase (Figure 1(b)), neighborhood resources are tightly coordinated that forms the CI’s central-core (CC) to provide guaranteed viability of CI over a longer horizon. In the third phase, self-organizing power networks are expanded in a distributed layer supporting the central-core (Figure 1(c)). In the fourth phase, separate CI-networks coalesce and are controlled in a coordinated fashion to provide grid ancillary services (AS), such as primary frequency control and enhancing grid resiliency. With time, system efficiencies and penetration of renewables increase, while the time-horizon of guaranteed sustenance of CI is maximized. Under proposed work, the concept will be instantiated with a focus on medical centers as CI. Comprehensive power hardware in the loop strategies and emulated field tests will guide and validate devised solutions. A strong T2M effort to commercialize resulting technology is outlined. The proposed technology will be transformative for the grid. It will fundamentally change the way large contingencies are managed where power systems and critical infrastructure transition from being fragile to being robust using intelligent, self-organizing control for coordinating resources, enhanced resiliency and use of sustainable energy sources.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Navier: Dataflow Architecture for Computation Chemistry

Navier’s objectives were two evaluate the use of emerging technologies, especially dataflow accelerators, for high-performance computing (HPC) applications, specifically in the domain of chemistry, and to develop a prototype software stack to support such applications. Navier builds on capabilities previously developed by synergistic projects, such as PNNL Data Model Convergence (DMC) LDRD Hardware Advanced Workflows (HAW) and DuOMO, as well as DOE ARIAA. Throughout its 18 months, the Navier team developed new capabilities and artifacts at all levels of the HW/SW stack, provided a seamless way to integrate novel computing architectures (Sambanova SN10 and Xilinx Versal AI) into an existing software stack, developed chemistry workflows, data analytics tools, and HPC molecular dynamics workflows that leverage the developed stack and PNNL institutional investments in emerging architectures. Navier also explored the use of active learning to accelerate a computational chemistry workflow for organic molecules on PNNL Junction cluster (in collaboration with AMD/Xilinx). Navier developed tools, methodologies, and studies for hardware software co-design and (sparse) dataflow accelerators that are composable and can be used together or separately. These methodologies are now used in other projects, such as DOE AMAIS and HPDA. This report describes Navier’s achievement, the developed tools and methodologies, and the research findings and conclusions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rock Valley Dense Gravity Acquisition

Characterizing the shallow structure of the Rock Valley region of the Nevada National Security Site is a critical component of the Rock Valley Direct Comparison project. Geophysical data of the region is needed for operational decisions, to constrain geologic models used for simulation, and to facilitate the analysis of future explosive source data. Local measurements of gravity are a key piece of geophysical information that helps to resolve the underlying geologic composition, fault structure, and density characteristics, yet, in the Rock Valley region these measurements are sparse on the scale of the testbed. In this report, we present the details of a recent gravity data acquisition survey designed to collect a dense dataset in the region of interest that complements the existing gravity work but greatly enhances our resolution. This dataset will be integrated with a complementary Los Alamos National Laboratory gravity collection and combined with the existing seismic data in a joint inversion. These measurements were conducted over two weeks with a portable gravimeter and high-resolution GPS and include repeat measurements at a USGS base station as well as reoccupation of gravity sites in the regional dataset. This collection of over 100 new dense gravity measurements will facilitate refinement of the existing Geologic Framework Model and directly complement newly acquired dense seismic data, ultimately improving the project’s ability to investigate the direct comparison of shallow earthquake and explosive sources.

58 GEOSCIENCES↗
DOE OSTI2023

Parallel Algebraic Multigrid for Fusion and Higher-Order PDEs

Multigrid methods play a key role in large-scale scientific simulation because they are among the fastest and most scalable approaches for solving the underlying sparse linear systems of equations that arise from a wide array of Partial Differential Equation (PDE) discretizations. Algebraic multigrid (AMG) is a special type of multigrid method that depends only on the description of the linear system, giving it better portability and broader applicability than geometric multigrid, as it requires no explicit knowledge of the problem geometry. Even though these methods are widely used today, there are still applications where further development is needed. In this report, we focus on PDEs with higher-order terms (e.g., fourth order), concentrating on a PDE that arises in tokamak edge plasma simulations (a tokamak is a machine that confines a plasma using magnetic fields and is believed to be the leading plasma confinement concept for future fusion power plants). General multigrid relaxes a linear system on coarser grids and reverses this process with interpolation, but standard AMG methods struggle with the aforementioned higher-order PDEs. We investigate cyclic coarsening and interpolation heuristics, as well as new iterative approximation methods of refining the solution at each grid to improve the existing multigrid approach. To this end, we ensure that these techniques are transferable to a parallelized setting with LLNL’s supercomputers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Boundary-Layer Gradients in New Particle Formation Field Campaign Report

Atmospheric new particle formation (NPF) followed by growth of the particles to ~50-150 nm is estimated to account for over 50% of the particles that can activate cloud droplets. As such, NPF and the subsequent growth plays a critical role in our ability to understand how aerosols affect cloud life cycle, properties, and processes and more generally the Earth’s radiative balance. NPF and growth is known to occur throughout the troposphere including in both the boundary layer and the free troposphere. The majority of NPF and growth observations, however, come from surface-based measurements within the boundary layer. Measurements of the vertical distribution of NPF and growth are sparse and thus insufficient to test many of the hypotheses that attempt to explain connections between NPF and boundary-layer transport and meteorology. The purpose of this campaign was to investigate the vertical distribution of NPF and growth at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Real-Time Neuromorphic Processing of Spatiotemporal Data for Scientific Discovery

Spiking Neural Networks (SNNs) are brain-inspired computing models incorporating unique temporal dynamics and event-driven processing. Rich dynamics in both space and time offer great challenges and opportunities for efficient processing of sparse spatiotemporal data compared with conventional artificial neural networks (ANNs). Under this context, the goal of this project is to develop spiking neural network based neuromorphic computing to enable energy-efficient real-time learning and processing of spatiotemporal data. This report summarizes the key results on network architecture design, training methods, and SNN hardware acceleration achieved under this project, demonstrating the promise of spiking neural networks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Towards Lattice QCD Calculations of Pion Production

Neutrino oscillation experiments require accurate reconstructions of neutrino energies, which depend in part on a theoretical understanding of the axial N→Δ transition form factors. A lattice QCD study of this transition will require construction of all hadronic states with energies up to mΔ, which at the physical point includes Nπ and Nππ. Building interpolating operators from sparse grids at the source and sink is a versatile method that allows construction of a wide range of diagram topologies and has successfully been used in other multi-hadron calculations. We will discuss application of this method to nucleon-pion systems and present preliminary results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Joint Inversion of Surface Electrical Resistivity Tomography and Seismic Refraction Data between the 200 Areas

Geologic stratigraphy on the Hanford Site influences groundwater and contaminant migration through the aquifer system and the vadose zone. The current geologic framework model (GFM) relies heavily on a sparse distribution of borehole data in some locations to map geologic contacts and hydrologic properties in the subsurface. Non-invasive geophysical methods such as electrical resistivity tomography (ERT), transient electromagnetic surveying, and seismic imaging are being used at Hanford to map subsurface structure in areas with limited well observations. This is to develop and mature the capability of geophysical methods to aid in GFM refinement, to identify regions of subsurface complexity, and for optimal well siting. A joint inversion of co-located seismic refraction and ERT data was carried out for data collected on a ~2.3-km profile between the 200 Areas on the Hanford Site. While ERT and seismic refraction images have sensitivity to overlapping physical properties (porosity, moisture content, lithology), the resolution and physics used to acquire each of these datasets are different and therefore information can be different or mutually complementary. Performing a joint inversion provides a reasonable option for a coherent, coupled interpretation for mutually complementary datasets. Between the 200 Areas, there are few boreholes to interpret the geologic framework model, and these data sets were obtained to provide a first line of evidence toward identifying stratigraphic structure. The seismic refraction and ERT data were independently inverted during fiscal year 2022 and broadly showed a two-layer structure with a trough-like feature that is ~1 km wide and upwards of 150 m deep. The depth of the trough feature was greater in the ERT image compared to the seismic image, which indicated a maximum depth of approximately 110 m. The objective of the joint inversion described in this report was to invert the seismic refraction and ERT data together while constraining the ERT image to be structurally similar to the seismic refraction image. The approach was applied using the geophysical inverse modeling program E4D, which has the capability to invert first-arrival times from seismic refraction data and ERT resistances using a “cross-gradient” constraint. The application of cross-gradient constraints with different weights produces ERT models that show a high degree of similarity within the upper 100 m (above ~120 m elevation). None of the ERT models show an improved structural similarity to the seismic result; therefore, it is recommended that further attempts to jointly interpret these models focus on petrophysics and image resolution. Petrophysical measurements of core samples would improve knowledge of what drives the ERT response in this region and, along with downhole geophysical measurements, could be used to “ground truth” the surface-based geophysical results. Image resolution studies would provide insight into which regions of the inverted images are reliable and which regions are poorly constrained.

58 GEOSCIENCES↗
DOE OSTI2024

NEAMS-Multiphysics MOOSE End Year Framework Activities FY20

The Multiphysics Object Oriented Simulation Environment (MOOSE) is a general finite element package meant for high performance solution of multiphysics problems in science and engineering. In this report, we present additions and enhancements to MOOSE funded by the Nuclear Engineering Advanced Modeling and Simulation (NEAMS) program. NEAMS-funded MOOSE framework library improvements include: expansion of support for multi-level multi-application restart; enhancement of coupling between native MOOSE applications and external libraries; addition of a sparse automatic differentiation (AD) container enabling non-local degree of freedom coupling; block-specific quadrature rules; further development of an eigenvalue executioner; faster setup of periodic boundary conditions; and creation of a mesh meta-data system streamlining simulation startup. Besides developing the framework library, NEAMS funds were used to overhaul a swath of important MOOSE infrastructure in order to substantially improve user experience. These critical infrastructure changes included adapting MOOSE to python 3, improving the test harness to catch race conditions, and most importantly transitioning MOOSE to use Conda, a globally known packaging system, that greatly eases software adoption.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Generative network-based approaches to generate stochastic realizations

Generative Adversarial Network (GAN) – based models have been successfully applied in generating different geological models in the literature. However, it is still challenging to use GAN to generate geological realizations with extremely sparse conditioning data (e.g. several well data), which may be regarded as local noise by GAN during the training process. In this work, we propose a novel conditional Generative Adversarial Neural Operator (cGANO) to tackle this challenge. In cGANO, the mapping between conditioning data and output is established through the U-shaped neural operators (UNO), which better preserves local information. Another advantage of using UNO comes from its grid-independent property, which makes the generation of downscaling stochastic geologic realizations possible. We tested the model performance on the IBDP geostatistical dataset with 100 realizations.

58 GEOSCIENCES↗
DOE OSTI2022

Creep and Fatigue Characterization of High Strength Alloy Thin Sections in Advanced CO2 Heat Exchangers

The objective of this work was to characterize and model elevated temperature creep and fatigue behavior for thin sheet and foil forms of gamma-prime strengthened alloys in wrought form and as-processed folded and brazed constructions. This work was motivated by the demanding temperature and pressure service conditions of the GEN3 Concentrated Solar Power (CSP) and supercritical CO2 (sCO2) power cycle working fluid. More specifically, the possibility of leveraging the superior creep strength of gamma-prime alloys in folded-fin and brazed-plate heat exchanger constructions. Gamma-prime alloys represent a step-change in raw-material strength over solid-solution strengthened alloys. And the folded-fin and brazed-plate heat exchanger architecture is lightweight and leverages cost-effective material stock forms. The investigation contained two parallel paths. (1) The first is referred to as a fundamental investigation where Oak Ridge National Laboratory conducts uniaxial creep testing on thin sheet and foil in wrought form. This effort aimed to serve as a benchmark against a relatively sparse existing database and a baseline comparison for path number 2. (2) The second path is referred to as the practical investigation where Brayton Energy manufactures plate-fin heat exchangers and performs pressurized creep and fatigue testing. This effort aimed to de-risk heat exchanger manufacturing process for service under sCO2 CSP conditions. A total of 14 uniaxial creep tests were completed using Haynes 282 thin sheet and foil. A variety of heat treatments were specified to coincide with path number 2. Baseline metallography of test samples and creep strength performance are contained. Benchmarks relatively to existing thick-form Haynes 282 are made, as well as to other thin-form Nickel-based superalloys. Description of a wrought-form modeling approach for thin gamma-prime alloys is also discussed. A total of 11 pressurized creep and fatigue tests were completed successfully with Haynes 282 heat exchanger prototypes. Manufacturing processing details, testing details, testing results, and failure analysis are discussed. Additionally, creep modeling techniques to predict failure are discussed, and modeling to support technological-to-market. In conclusion, Haynes 282 foils were demonstrated to yield rupture two-to-three orders of magnitude higher than Haynes 230 foils under similar conditions. And the manufactured heat exchanger prototypes demonstrated strength similar to the wrought constituents. Both of which contribute to elevated performance potential or cost savings in practice. Discussion is included.

14 SOLAR ENERGY↗