Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulation tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Impact of Limited Degree of Freedom Drag Coefficients on a Floating Offshore Wind Turbine Simulation

The worldwide effort to design and commission floating offshore wind turbines (FOWT) is motivating the need for reliable numerical models that adequately represent their physical behavior under realistic sea states. However, properly representing the hydrodynamic quadratic damping for FOWT remains uncertain, because of its dependency on the choice of drag coefficients (dimensionless or not). It is hypothesized that the limited degree of freedom (DoF) drag coefficient formulation that uses only translational drag coefficients causes mischaracterization of the rotational DoF drag, leading to underestimation of FOWT global loads, such as tower base fore-aft shear. To address these hydrodynamic modeling uncertainties, different quadratic drag models implemented in the open-source mid-fidelity simulation tool, OpenFAST, were investigated and compared with the experimental data from the Offshore Code Comparison Collaboration, Continued, with Correlation (OC5) project. The tower base fore-aft shear and up-wave mooring line tension were compared under an irregular wave loading condition to demonstrate the effects of the different damping models. Two types of hydrodynamic quadratic drag formulations were considered: (1) member-based dimensionless drag coefficients applied only at the translational DoF (namely limited-DoF drag model) and (2) quadratic drag matrix model (in dimensional form). Based on the results, the former consistently underestimated the 95th percentile peak loads and spectral responses when compared to the OC5 experimental data. In contrast, the drag matrix models reduced errors in estimates of the tower base shear peak load by 7–10% compared to the limited-DoF drag model. The underestimation in the tower base fore-aft shear was thus inferred be related to mischaracterization of the rotational pitch drag and the heave motion/drag by the limited-DoF model.

17 WIND ENERGY↗
DOE OSTI2016

VALIDATION OF THE CORONAL THICK TARGET SOURCE MODEL

We present detailed 3D modeling of a dense, coronal thick-target X-ray flare using the GX Simulator tool, photospheric magnetic measurements, and microwave imaging and spectroscopy data. The developed model offers a remarkable agreement between the synthesized and observed spectra and images in both X-ray and microwave domains, which validates the entire model. The flaring loop parameters are chosen to reproduce the emission measure, temperature, and the nonthermal electron distribution at low energies derived from the X-ray spectral fit, while the remaining parameters, unconstrained by the X-ray data, are selected such as to match the microwave images and total power spectra. The modeling suggests that the accelerated electrons are trapped in the coronal part of the flaring loop, but away from where the magnetic field is minimal, and, thus, demonstrates that the data are clearly inconsistent with electron magnetic trapping in the weak diffusion regime mediated by the Coulomb collisions. Thus, the modeling supports the interpretation of the coronal thick-target sources as sites of electron acceleration in flares and supplies us with a realistic 3D model with physical parameters of the acceleration region and flaring loop.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

Impact of Solar Control PVB Glass on Vehicle Interior Temperatures, Air-Conditioning Capacity, Fuel Consumption, and Vehicle Range

The objective of the study was to assess the impact of Saflex1 S-series Solar Control PVB (polyvinyl butyral) configurations on conventional vehicle fuel economy and electric vehicle (EV) range. The approach included outdoor vehicle thermal soak testing, RadTherm cool-down analysis, and vehicle simulations. Thermal soak tests were conducted at the National Renewable Energy Laboratory's Vehicle Testing and Integration Facility in Golden, Colorado. The test results quantified interior temperature reductions and were used to generate initial conditions for the RadTherm cool-down analysis. The RadTherm model determined the potential reduction in air-conditioning (A/C) capacity, which was used to calculate the A/C load for the vehicle simulations. The vehicle simulation tool identified the potential reduction in fuel consumption or improvement in EV range between a baseline and modified configurations for the city and highway drive cycles. The thermal analysis determined a potential 4.0% reduction in A/C power for the Saflex Solar PVB solar control configuration. The reduction in A/C power improved the vehicle range of EVs and fuel economy of conventional vehicles and plug-in hybrid electric vehicles.

14 SOLAR ENERGY↗
DOE OSTI2015

Will Your Battery Survive a World With Fast Chargers?

Fast charging is attractive to battery electric vehicle (BEV) drivers for its ability to enable long-distance travel and quickly recharge depleted batteries on short notice. However, such aggressive charging and the sustained vehicle operation that result could lead to excessive battery temperatures and degradation. Properly assessing the consequences of fast charging requires accounting for disparate cycling, heating, and aging of individual cells in large BEV packs when subjected to realistic travel patterns, usage of fast chargers, and climates over long durations (i.e., years). The U.S. Department of Energy's Vehicle Technologies Office has supported the National Renewable Energy Laboratory's development of BLAST-V-the Battery Lifetime Analysis and Simulation Tool for Vehicles-to create a tool capable of accounting for all of these factors. We present on the findings of applying this tool to realistic fast charge scenarios. The effects of different travel patterns, climates, battery sizes, battery thermal management systems, and other factors on battery performance and degradation are presented. We find that the impact of realistic fast charging on battery degradation is minimal for most drivers, due to the low frequency of use. However, in the absence of active battery cooling systems, a driver's desired utilization of a BEV and fast charging infrastructure can result in unsafe peak battery temperatures. We find that active battery cooling systems can control peak battery temperatures to safe limits while allowing the desired use of the vehicle.

25 ENERGY STORAGE↗
DOE OSTI2022

Validation of wind resource and energy production simulations for small wind turbines in the United States

Abstract. Due to financial and temporal limitations, the small wind community relies upon simplified wind speed models and energy production simulation tools to assess site suitability and produce energy generation expectations. While efficient and user-friendly, these models and tools are subject to errors that have been insufficiently quantified at small wind turbine heights. This study leverages observations from meteorological towers and sodars across the United States to validate wind speed estimates from the Wind Integration National Dataset (WIND) Toolkit, the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis v5 (ERA5), and the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2), revealing average biases within ±0.5 m s−1 at small wind hub heights. Observations from small wind turbines across the United States provide references for validating energy production estimates from the System Advisor Model (SAM), Wind Report, MyWindTurbine.com, and Global Wind Atlas 3 (GWA3), which are seen to overestimate actual annual capacity factors by 2.5, 4.2, 11.5, and 7.3 percentage points, respectively. In addition to quantifying the error metrics, this paper identifies sources of model and tool discrepancies, noting that interannual fluctuation in the wind resource, wind speed class, and loss assumptions produces more variability in estimates than different horizontal and vertical interpolation techniques. The results of this study provide small wind installers and owners with information about these challenges to consider when making performance estimates and thus possible adjustments accordingly. Looking to the future, recognizing these error metrics and sources of discrepancies provides model and tool researchers and developers with opportunities for product improvement that could positively impact small wind customer confidence and the ability to finance small wind projects.

17 WIND ENERGY↗
DOE OSTI2024

Mist

Determining the appropriate material data is often a bottleneck for performing calculations/simulations of industrial/experimental processes and resulting material structures and properties. Beyond the time it takes to find the appropriate values in the literature, many judgement calls are involved in choosing the values. These judgement calls can lead to inconsistencies between steps in research workflow, where different material parameter values are used. Mist solves this problem by providing a mechanism to store, share, and use material information in convenient human-readable and machine-readable formats. Mist has an extensible ontology for defining a wide variety of material information, currently focused on metal alloy applications. Examples include: alloy composition, density, liquidus temperature, and the coefficient of thermal expansion. Mist converts between standardized machine-readable data formats (e.g. JSON), specialized input format for simulation tools, and human-readable documents (e.g. LaTeX, Markdown). For parameters defined by an equation (e.g. a polynomial function) or a list of tabulated values, Mist can evaluate parameter values at requested conditions. Mist also provides an API for direct usage of the Mist data structures in calculations, if supported.

DeWitt, Stephen [Oak Ridge National Laboratory (OR↗
DOE OSTI2026

Modeling Wind in Agrivoltaics and its Impact on Eddy Covariance Flux Measurements

Silicon Ranch is conducting a research study at their 138MW Bancroft Station agrivoltaics site, the largest agrivoltaics research array in the US, in which they are using an eddy covariance flux tower to measure the carbon budget. They are interested in finding out if the presence of the panels changes the effectiveness of these measurements. To investigate this topic, NLR performed numerical simulations of wind through the agrivoltaic array to identify under what environmental conditions (wind speed, wind direction, temperatures) and panel tilt angles the mean wind speeds at the measurement heights are significantly altered by the presence of the solar panels. NLR adapted and used the PVade simulation tool [1] to model wind in Silicon Ranch's agrivoltaic array and found that at the height of the flux tower (6m), the wind speed measured is not significantly altered by the presence of solar panels. The percent difference is less than 4% and is generally greatest during daytime conditions at higher wind speeds and perpendicular wind direction. Closer to the ground, the flow is significantly altered (wind speeds are reduced) by the presence of solar panels and the percent difference increases in strong winds. The work confirmed that eddy covariance flux towers can be used within the context of a solar array field.

14 SOLAR ENERGY↗
DOE OSTI2026

From Vehicles to Systems: Understanding Freight Transportation as a Connected Energy, Infrastructure, and Operations System

The U.S. freight system may need to handle 50% more cargo by 2050. Upgrading our freight system requires modernizing capital-intensive, long-lived assets including freight trains, ports, and terminal infrastructure. NLR is advancing freight system solutions spanning ALTRIOS, the first digital twin for the full freight rail system; ALTRIOS-LIFTS, which can create digital twins of freight terminals; INFORMES, the first national model of the intermodal freight system; MARINESim, used to simulate and optimize ocean-going vessel operations; and more. These modeling and simulation tools enable data-driven decision-making across freight modes and systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Dataset of Generative AI Workload Power Profiles

This dataset provides a collection of high-resolution (5/10 Hz or every 0.2/0.1 seconds) power consumption profiles for generative artificial intelligence (GenAI) workloads executed on NLR's High Performance Computing (HPC) platform Kestrel. The dataset also includes examples of representative whole-facility power profiles generated using a bottom-up, event-driven, data center energy model . This dataset is designed to support research in energy modeling, infrastructure planning, energy system integration, and sustainability analysis for AI-driven computing systems. The dataset captures time-resolved electrical power measurements across a diverse set of configurations, including variations in job type (inference vs. training), workload (LLM vs. image generation), datasets, and number of compute nodes. Power traces are provided in a standardized format and include both raw/instantaneous and aggregated files. Each profile is accompanied by metadata describing workload parameters, enabling reproducibility and cross-study comparison. The dataset is intended for use in applications such as data center infrastructure planning, energy modeling, demand response and grid impact studies, and development and validation of system-level simulation tools. By making these workload-specific power profiles publicly available, this dataset aims to address the current lack of open, empirical energy data for generative AI systems and to facilitate transparent, reproducible research on the energy and environmental impacts of large-scale AI deployment. If you use this dataset, please cite the associated publication: Vercellino et al., “Measurement of Generative AI Workload Power Profiles for Whole-Facility Data Center Infrastructure Planning,” arXiv:2604.07345 (2026).

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1980

Mission planning and analysis division development plan for STS-2 through STS-4

The baseline products, schedules, and resource requirements for the Mission Planning and Analysis Division's support of Space Transportation System flights 2, 3, and 4 are presented. Major functions addressed are: orbiter software, Mission Control Center software, flight design, flight operations support, simulation tools, and postflight analysis.

Source record↗
NASA NTRS1980

Performance analysis and simulation of the SPS reference phase control system

Key results pertinent to the SPS reference phase control system design are summarized. These results are a consequence of extensive system engineering tradeoffs provided via mathematical modeling, optimization, analysis and the development/utilization of a computer simulation tool called SOLARSIM.

Lindsey, W. C.↗
NASA NTRS1981

The application of simulation modeling to the cost and performance ranking of solar thermal power plants

Small solar thermal power systems (up to 10 MWe in size) were tested. The solar thermal power plant ranking study was performed to aid in experiment activity and support decisions for the selection of the most appropriate technological approach. The cost and performance were determined for insolation conditions by utilizing the Solar Energy Simulation computer code (SESII). This model optimizes the size of the collector field and energy storage subsystem for given engine generator and energy transport characteristics. The development of the simulation tool, its operation, and the results achieved from the analysis are discussed.

Rosenberg, L. S.↗
NASA NTRS1982

The engineering investigation of aircraft accidents

The organization and plan for an investigation, procedures used at the scene of the accident, engineering aspects covered in the main investigation, use of special analytical techniques and simulation tools, and use of flight recorder data are discussed. Examples of investigations are used to illustrate the processes used.

Anderson, S. B.↗
NASA NTRS1985

Bridgman growth of semiconductors

The purpose of this study was to improve the understanding of the transport phenomena which occurs in the directional solidification of alloy semiconductors. In particular, emphasis was placed on the strong role of convection in the melt. Analytical solutions were not deemed possible for such an involved problem. Accordingly, a numerical model of the process was developed which simulated the transport. This translates into solving the partial differential equations of energy, mass, species, and momentum transfer subject to various boundary and initial conditions. A finite element method with simple elements was initially chosen. This simulation tool will enable the crystal grower to systematically identify and modify the important design factors within her control to produce better crystals.

Carlson, F. M.↗
NASA NTRS1988

Distributed Architecture For Phased-Array Antennas

Distributed Architecture for Phased Array Antennas (DISTAR) computer program simulation tool used to study implementation of distributed phased-array equipment. Allows placement of possibly-faulty transmitting/receiving modules at locations throughout array. Variations in amplifiers and phase shifters degrades performance of antenna, depending on environmental conditions and array architecture. Enables antenna designer to examine characteristics of array and how they affect both types and extents of antenna failures. General specifications for amplifier and phase-shifter tolerances determined for various architectures. Written in FORTRAN 77.

Davidson, Shayla E.↗
NASA NTRS1988

Obstacle-avoidance automatic guidance - A concept-development study

This paper studies the notion of obstacle-avoidance guidance, and investigates the issues in automating this function by considering helicopter nap-of-the-earth (NOE) flight as an example. In particular, it considers a hierarchy of guidance components, including mission planning and obstacle avoidance. Based on this hierarchical breakdown, the functional requirements of obstacle-avoidance guidance are identified. An effort in developing automatic guidance algorithms to meet these requirements is presented, along with the necesssary simulation tools for evaluation of these algorithms.

Cheng, Victor H. L.↗
NASA NTRS1989

Dynamic analysis of space structures including elastic, multibody, and control behavior

The problem is to develop analysis methods, modeling stategies, and simulation tools to predict with assurance the on-orbit performance and integrity of large complex space structures that cannot be verified on the ground. The problem must incorporate large reliable structural models, multi-body flexible dynamics, multi-tier controller interaction, environmental models including 1g and atmosphere, various on-board disturbances, and linkage to mission-level performance codes. All areas are in serious need of work, but the weakest link is multi-body flexible dynamics.

Pinson, Larry↗
NASA NTRS1989

LaRC computational dynamics overview

Present research centers on the development of advanced computational methods for transient simulation analyses. Aircraft, launch vehicles and space structure components are potential applications, but primary focus is presently on large space structures. There are both in-house and out-of-house activities. The in-house activity centers around the development of a multibody simulation tool for truss-like structures called LATDYN for Large Angle Transient DYNamics. Multibody analysis involves articulation of structural components as well as robotic maneuvers. These items are necessary for construction (erection or deployment) of large space structures in orbit and the carrying out of certain operations on board the space station. Thus, part of the in-house activity involves the development of methods which treat the changing mass, stiffness and constraints associated with articulating systems. The out-of-house activity involves subcycling, development of large deformation/motion beam formulation, constraint stabilization and direct time integration transient algorithms in parallel computing.

Husner, J. M.↗