Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Structure-based approach to pharmacophore identification, in silico screening, and three-dimensional quantitative structure-activity relationship studies for inhibitors of Trypanosoma cruzi dihydrofolate reductase function

We have employed a structure-based three-dimensional quantitative structure-activity relationship (3D-QSAR) approach to predict the biochemical activity for inhibitors of T. cruzi dihydrofolate reductase-thymidylate synthase (DHFR-TS). Crystal structures of complexes of the enzyme with eight different inhibitors of the DHFR activity together with the structure in the substrate-free state (DHFR domain) were used to validate and refine docking poses of ligands that constitute likely active conformations. Structural information from these complexes formed the basis for the structure-based alignment used as input for the QSAR study. Contrary to indirect ligand-based approaches the strategy described here employs a direct receptor-based approach. The goal is to generate a library of selective lead inhibitors for further development as antiparasitic agents. 3D-QSAR models were obtained for T. cruzi DHFR-TS (30 inhibitors in learning set) and human DHFR (36 inhibitors in learning set) that show a very good agreement between experimental and predicted enzyme inhibition data. For crossvalidation of the QSAR model(s), we have used the 10% leave-one-out method. The derived 3D-QSAR models were tested against a few selected compounds (a small test set of six inhibitors for each enzyme) with known activity, which were not part of the learning set, and the quality of prediction of the initial 3D-QSAR models demonstrated that such studies are feasible. Further refinement of the models through integration of additional activity data and optimization of reliable docking poses is expected to lead to an improved predictive ability.

36 MATERIALS SCIENCE↗

Influence of valence electron concentration on Laves phases: Structures and phase stability of pseudo-binary MgZn 2-x Pd x

A series of pseudo-binary compounds MgZn 2-x Pd x (0.15 ≤ x ≤ 1.0) were synthesized and structurally characterized to understand the role of valence electron concentration (vec) on the prototype Laves phase MgZn 2 with Pd-substitution. Three distinctive phase regions were observed with respect to Pd content, all exhibiting fundamental Laves phase structures: 0.1 ≤ x ≤ 0.3 (MgNi 2 -type, h P24; MgZn 1.80 Pd 0.20(2) ), 0.4 ≤ x ≤ 0.6 (MgCu 2 -type, cF 24; MgZn 1.59 Pd 0.41(2) ), and 0.62 ≤ x ≤ 0.8 (MgZn 2 -type, hP 12: MgZn 1.37 Pd 0.63(2) ). Refinements from single-crystal X-ray diffraction indicated nearly statistical distributions of Pd and Zn atoms among the majority atom sites in these structures. Interestingly, the MgZn 2 -type structure re-emerges in MgZn 2–x Pd x at x ≈ 0.7 with the refined composition MgZn 1.37(2) Pd 0.63 and a c/a ratio of 1.59 compared to 1.64 for binary MgZn 2 . Electronic structure calculations on a model “MgZn 1.25 Pd 0.75 ” yielded a density of states (DOS) curve showing enhancement of a pseudogap at the Fermi level as a result of electronic stabilization due to the Pd addition. Moreover, integrated crystal orbital Hamilton population values show significant increases of orbital interactions for (Zn,Pd)–(Zn,Pd) atom pairs within the majority atom substructure, i.e., within the Kagomé nets as well as between a Kagomé net and an apical site, from binary MgZn 2 to the ternary “MgZn 1.25 Pd 0.75 ”. Multi-centered bonding is evident from electron localization function plots for “MgZn 1.25 Pd 0.75 ”, an outcome which is in accordance with analysis of other Laves phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relating Texture and Thermomechanical Processing Variables in Mg–Zn–Ca Alloys

It is well known that the strong basal texture commonly produced in magnesium alloy sheets leads to poor formability at room temperature. A sizable body of work has explored how changing the alloy composition and rolling conditions can yield more desirable textures; however important thermomechanical variables, such as the feed rate during rolling, are often not included in the literature, making it difficult to correlate how changes in processing affect the final crystallographic texture. This work explores the texture evolution and grain refinement in Mg-Zn-Ca alloys during plane strain compression (PSC) using a Gleeble thermomechanical simulator. This instrument allows for precise control and capture of the thermomechanical history of the sample. The texture and grain morphology of the compressed samples were characterized using Electron Backscatter Diffraction (EBSD). The texture results will be used to identify which alloys and processing conditions should be scaled up for future rolling studies.

36 MATERIALS SCIENCE↗

Effect of post-extrusion heat treatment on mechanical property of aluminum alloy 2024 tube produced using Shear Assisted Processing and Extrusion (ShAPE)

The present work deals with the Shear Assisted Processing and Extrusion (ShAPE) of aluminum alloy 2024 tubes and mechanical property optimization via post extrusion heat treatments (T3510 and T8510). The ShAPE process enables extruding AA2024 at an extrusion speed of 7.4 m/min and extrusion temperature of 480 °C, which is otherwise beyond the extrudability limit of this alloy using conventional extrusion techniques. The ultimate tensile strength reaches 466 MPa for ShAPE+T3510 condition and 503 MPa for ShAPE+T8510 condition, both of which exceed the corresponding ASTM/ASM (minimum/typical) values for the studied tube geometry. The yield strength reaches 382 MPa for ShAPE+T3510 condition and 481 MPa for ShAPE+T8510 condition, both of which surpass any reported values in the literature or the highest industrial values. In addition, the ductility of AA2024 tube fabricated from ShAPE+T3510 or ShAPE+T8510 are evidently improved by the grain size refinement, second phase refinement, and enhanced uniformity in second phase distribution due to the severe plastic deformation of ShAPE process.

Shear Assisted Processing and Extrusions (ShAPE), ↗

Shear Assisted Processing and Extrusion of Unhomogenized Aluminum Alloy 6063 Castings with High Iron Content

Shear Assisted Processing and Extrusion (ShAPE) was used to fabricate aluminum 6063 tubing directly from secondary scrap. Trimmings from an automotive manufacturing facility were cast into billets spiked with iron (0.3 wt% Fe) to explore the tolerance of ShAPE to Fe contamination. Billets were extruded in the unhomogenized condition to form tubing with an outer diameter of 12 mm and wall thickness of 2 mm. Tensile properties reached 0.2% YS = 206 MPa, UTS = 238 MPa, and U.E. = 16.3% in the T6 temper. Performance exceeds the ASTM minimum standard and is on par with ASM typical values for conventional extrusion of primary aluminum billets in the fully homogenized condition. Microstructural characterization shows extensive refinement of grain size along with dispersion and refinement of Fe-Al-Si intermetallic phases. This study suggests that ShAPE extrusion may offer a lower carbon manufacturing pathway through direct recycling of secondary aluminum scrap and elimination of the billet homogenization step.

solid phase processing, AA 6063, extrusion, Shear ↗

Solid Phase Processing of Mg-Al-Mn-Ca for High Strength and Ductility

While rare-earth Mg alloys have remarkable properties for high strength applications, lower cost alternatives are necessary for the widespread industry use of Mg. Ca added Mg alloys have shown promise as an alternative to rare-earth alloys. Ca-based precipitates can reduce basal texture, reduce casting porosity, and increase mechanical strength. However, the accumulation of Ca-based precipitates along inter-dendritic regions can severely limit ductility. Here, we apply two solid phase processing techniques, friction stir processing and shear assisted processing and extrusion, to produce wrought microstructure sheet and extruded tubes from a cast Mg-Al-Mn-Ca alloy. Ductility of the alloy is enhanced by densification under applied force and elevated temperature, grain refinement, and refinement of (Al,Mg)-Ca based precipitate.

Garcia, David↗

Application of High Performance Computing for Simulating the Unstable Dynamics of Dilute Spark-Ignited Combustion

In collaboration with a major automotive manufacturer, we are using computational simulations of in-cylinder combustion to understand the multi-scale nonlinear physics of the dilute stability limit. Because some key features of dilute combustion can take thousands of successive cycles to develop, the computation time involved in using complex models to simulate these effects has limited industrys ability to exploit simulations in optimizing advanced engines. We describe a novel approach for utilizing parallel computations to reveal long-timescale features of dilute combustion without the need to simulate many successive engine cycles in series. Our approach relies on carefully guided, concurrent, single-cycle simulations to create metamodels that preserve the long-timescale features of interest. We use a simplified combustion model to develop and demonstrate our strategy for adaptively guiding the concurrent simulations to generate metamodels. We next will implement this strategy with higher-fidelity, multi-scale combustion models on large computing facilities to generate more refined metamodels. The refined metamodels can then be used to accelerate engine development because of their efficiency. Similar approaches might also be used for rapidly exploring the dynamics of other complex multi-scale systems that evolve with serial dependency on time.

Finney, Charles↗

Effects of Cobalt on the Crystalline Structures of the Ni-Mn-In Giant Magnetocaloric Heusler Alloys

The giant inverse magnetocaloric effect driven by a merged magneto-structural transformations in Ni-Mn-In-Co Heusler alloys, makes them highly promising as solid state refrigerants near room temperature. Knowledge of the crystallographic behavior of these alloys at a broad temperature range is critical to the understanding of the giant magnetocaloric effect. In this study, three Ni-Mn-In-Co alloys were investigated by neutron and synchrotron diffraction techniques. The chemical compositions of the alloys, determined by the Rutherford Backscattering Spectrometry (RBS) technique, were Ni 41 Mn 39 In 12 Co 8 , Ni 48 Mn 34 In 12 Co 6 and Ni 52 Mn 25 In 16 Co 7 . The austenitic (A) phase of all three alloys was cubic L2 1 (Fm$ \overline{3}\ $m). Martensitic (M) phase of the Ni 41 Mn 39 In 12 Co 8 alloy was a mix of 8M and 6M modulated monoclinic structures, while the other two alloys had a M composed of a mix of 7 M and 5 M modulated monoclinic structures. All modulated structures belong to the P 1 2/m 1 space group. Site occupancy refinements of the A phases of all three alloys, revealed that almost all the Co atoms (~97%) occupy the regular Ni (8c) sites. In the studied temperature range (50–250 K) of the M phase of the Ni 41 Mn 39 In 12 Co 8 alloy has very low magnetization. Also, no antiferromagnetic ordring was observed in the neutron diffraction refinement of the M phase. Therefore by eliminating the possibilities of ferromagnetism and antiferromagnetism, it is concluded that the M phase of the Ni 41 Mn 39 In 12 Co 8 alloy is spin glass.

Madiligama, A↗

Screening for Lipids From Marine Microalgae Using Nile Red

The fluorescent stain Nile Red has been used extensively for the quantification of lipids in phytoplankton, including microalgae, because it preferentially stains neutral lipids and it is economical and sensitive to use for screening purposes. Although its basic application has not changed for several decades, recent improvements have been made to improve its utility across applications. Here we describe additional refinements in its application and interpretation as a highthroughput method for the rapid quantification of neutral lipids in liquid cultures of marine phytoplankton. Specifically we address (1) interspecies comparisons, (2) fluorescence excitation and emission wavelengths, and (3) the time course of the Nile Red signal in the context of using bulk or cell-specific fluorescence to quantify neutral lipids oflive or preserved cells. Here, we show that with proper caution in its interpretation across species and physiological states the quantity of lipid in hundreds of small volume samples can be reliably assessed daily using a refined Nile Red protocol.

09 BIOMASS FUELS↗

Leading order corrections to the quantum extremal surface prescription

We show that a naïve application of the quantum extremal surface (QES) prescription can lead to paradoxical results and must be corrected at leading order. The corrections arise when there is a second QES (with strictly larger generalized entropy at leading order than the minimal QES), together with a large amount of highly incompressible bulk entropy between the two surfaces. We trace the source of the corrections to a failure of the assumptions used in the replica trick derivation of the QES prescription, and show that a more careful derivation correctly computes the corrections. Using tools from one-shot quantum Shannon theory (smooth min- and max-entropies), we generalize these results to a set of refined conditions that determine whether the QES prescription holds. We find similar refinements to the conditions needed for entanglement wedge reconstruction (EWR), and show how EWR can be reinterpreted as the task of one-shot quantum state merging (using zero-bits rather than classical bits), a task gravity is able to achieve optimally efficiently.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tetraquarks in the Born-Oppenheimer approximation

The conventional loosely bound molecule interpretation of the X(3872) is not compatible with the recent LHCb experimental measurement of the ratio of branching fractions $\mathcal{R}$ = Br(X → ψ′γ)/Br(X → ψγ). We systematically determine the entire tetraquark spectrum for J = 0, 1, 2 and refine the calculation of $\mathcal{R}$ in an improved Born-Oppenheimer description of the X(3872) compact tetraquark. This refinement yields a significantly better agreement with experimental data on $\mathcal{R}$ and on the spectroscopy of the states themselves. Extending the diquark-antidiquark paradigm to encompass tetraquarks that are linear super-positions of open charm singlets and color octets, we discover that these exotic resonances manifest as compact shallow bound states of quarks in color force potentials.

Effective Field Theories of QCD↗

The holographic dual of Rényi relative entropy

The relative entropy is a measure of the distinguishability of two quantum states. A great deal of progress has been made in the study of the relative entropy between an excited state and the vacuum state of a conformal field theory (CFT) reduced to a spherical region. For example, when the excited state is a small perturbation of the vacuum state, the relative entropy is known to have a universal expression for all CFT’s. Specifically, the perturbative relative entropy can be written as the symplectic flux of a certain scalar field in an auxiliary AdS-Rindler spacetime. Moreover, if the CFT has a semi-classical holographic dual, the relative entropy is known to be related to conserved charges in the bulk dual spacetime. In this paper, we introduce a one-parameter generalization of the relative entropy which we call refined Rényi relative entropy. We study this quantity in CFT’s and find a one-parameter generalization of the aforementioned known results about the relative entropy. We also discuss a new family of positive energy theorems in asymptotically locally AdS spacetimes that arises from the holographic dual of the refined Rényi relative entropy.

97 MATHEMATICS AND COMPUTING↗

Updates to the Regional Seismic Travel Time (RSTT) Model: 1. Tomography

Abstract A function of global monitoring of nuclear explosions is the development of Earth models for predicting seismic travel times for more accurate calculation of event locations. Most monitoring agencies rely on fast, distance-dependent one-dimensional (1D) Earth models to calculate seismic event locations quickly and in near real-time. RSTT (Regional Seismic Travel Time) is a seismic velocity model and computer software package that captures the major effects of three-dimensional crust and upper mantle structure on regional seismic travel times, while still allowing for fast prediction speed (milliseconds). We describe updates to the RSTT model using a refined data set of regional phases (i.e., Pn, Pg, Sn, Lg) using the Bayesloc relative relocation algorithm. The tomographic inversion shown here acts to refine the previous RSTT public model ( rstt201404um ) and displays significant features related to areas of global tectonic complexity as well as further reduction in arrival residual values. Validation of the updated RSTT model demonstrates significant reduction in median epicenter mislocation (15.3 km) using all regional phases compared to the iasp91 1D model (22.1 km) as well as to the current station correction approach used at the Comprehensive Nuclear-Test-Ban Treaty Organization International Data Centre (18.9 km).

58 GEOSCIENCES↗

Quantization of the Higher Berry Curvature and the Higher Thouless Pump

Here, we show that for families of 1d lattice systems in an invertible phase, the cohomology class of the higher Berry curvature can be refined to an integral degree-3 class on the parameter space. Similarly, for families of U(1)-invariant 2d lattice systems in an invertible phase, the higher Thouless pump can be refined to an integral degree-2 class on the parameter space. We show that the 2d Thouless pump can be identified with an excess Berry curvature of a flux insertion.

97 MATHEMATICS AND COMPUTING↗

Model-based Approaches for the Determination of Lipid Bilayer Structure from Small-Angle Neutron and X-ray Scattering Data

Some of our recent work has resulted in the detailed structures of fully hydrated, fluid phase phosphatidylcholine (PC) and phosphatidylglycerol (PG) bilayers. These structures were obtained from the joint refinement of small-angle neutron and X-ray data using the scattering density profile (SDP) models developed by Ku erka et al. (Ku erka et al. 2012; Ku erka et al. 2008). In this review, we first discuss models for the standalone analysis of neutron or X-ray scattering data from bilayers, and assess the strengths and weaknesses inherent in these models. In particular, it is recognized that standalone data do not contain enough information to fully resolve the structure of inherently disordered fluid bilayers, and therefore may not provide a robust determination of bilayer structural parameters, including the much sought after area per lipid. We then discuss the development of matter density-based models (including the SDP model) that allow for the joint refinement of different contrast neutron and X-ray data sets, as well as the implementation of local volume conservation in the unit cell (i.e., ideal packing). Such models provide natural definitions of bilayer thicknesses (most importantly the hydrophobic and Luzzati thicknesses) in terms of Gibbs dividing surfaces, and thus allow for the robust determination of lipid areas through equivalent slab relationships between bilayer thickness and lipid volume. In the final section of this review, we discuss some of the significant findings/features pertaining to structures of PC and PG bilayers as determined from SDP model analyses.

Heberle, Frederick A↗

High-Pressure Neutron Diffraction Study on H-D Isotope Effects in Brucite

A neutron powder diffraction study of hydrogenated and deuterated brucite was conducted at ambient temperature and at pressures to 9 GPa, using a Paris-Edinburgh high-pressure cell at the WAND instrument of ORNL High Flux Isotope Reactor. The two materials were synthesized by the same method and companion measurements of neutron diffraction were conducted under the same conditions. Our refinement results show that the lattice-parameters of the a axis, parallel to the sheets of Mg-O octahedra, decreases only slightly with pressure with no effect of H-D substitution. However, the c axis of Mg(OD)2 is shorter and decreases more rapidly than that of Mg(OH)2 with increasing pressure. Consequently, the unit-cell volume of deuterated brucite is slightly, but systematically smaller than that of normal brucite, which were fitted to third-order Birch-Murnaghan equation: K0=41.46 0.52 and 39.04 0.30 GPa for Mg(OH)2 and Mg(OD)2, respectively with a fixed K0 value of 10. Our results suggest that H-D substitution of brucite and other hydrous minerals with H-bonding likely influences their structural and dynamic properties under pressure, including the position of hydrogen atoms. The measured effect of H-D substitution on the unit-cell volume also demonstrates that brucite (and other hydrous minerals) preferentially incorporate deuterium over hydrogen under pressure, suggesting that the distribution of hydrogen isotopes in deep-earth conditions may differ significantly from that in near-surface environments.

08 HYDROGEN↗

Thermal Equation of State of CaIrO3 Post-perovskite

The pressure-volume-temperature (P-V-T) relation of CaIrO{sub 3} post-perovskite (ppv) was measured at pressures and temperatures up to 8.6 GPa and 1,273 K, respectively, with energy-dispersive synchrotron X-ray diffraction using a DIA-type, cubic-anvil apparatus (SAM85). Unit-cell dimensions were derived from the Le Bail full profile refinement technique, and the results were fitted using the third-order Birth-Murnaghan equation of state. The derived bulk modulus K{sub T0} at ambient pressure and temperature is 168.3 {+-} 7.1 GPa with a pressure derivative K{sub T0} = 5.4 {+-} 0.7. All of the high temperature data, combined with previous experimental data, are fitted using the high-temperature Birch-Murnaghan equation of state, the thermal pressure approach, and the Mie-Grueneisen-Debye formalism. The refined thermoelastic parameters for CaIrO{sub 3} ppv are: temperature derivative of bulk modulus ({partial_derivative}K{sub T}/{partial_derivative}T){sub P} = -0.038 {+-} 0.011 GPa K{sup -1}, {alpha}K{sub T} = 0.0039 {+-} 0.0001 GPa K{sup -1}, ({partial_derivative}K{sub T}/{partial_derivative}T){sub V} = -0.012 {+-} 0.002 GPa K{sup -1}, and ({partial_derivative}{sup 2}P/{partial_derivative}T{sup 2}){sub V} = 1.9 {+-} 0.3 x 10{sup -6} GPa{sup 2} K{sup -2}. Using the Mie-Grueneisen-Debye formalism, we obtain Grueneisen parameter {gamma}{sub 0} = 0.92 {+-} 0.01 and its volume dependence q = 3.4 {+-} 0.6. The systematic variation of bulk moduli for several oxide post-perovskites can be described approximately by the relationship K{sub T0} = 5406.0/V(molar) + 5.9 GPa.

58 GEOSCIENCES↗

The High-Resolution Powder Diffractometer at the High Flux Isotope Reactor

Neutron powder diffraction is increasingly recognized as one of the most powerful techniques for studying the structural and magnetic properties of advanced materials. Despite the growing demand to study an ever-increasing array of interesting materials, there is only a handful of neutron diffractometers available to serve the U.S. neutron scattering community. This article describes the new high-resolution powder diffractometer that has recently been installed at the High Flux Isotope Reactor in Oak Ridge. The instrument is designed to provide an optimum balance between high neutron flux and high resolution. Due to its versatility the diffractometer can be employed for a large variety of experiments, but it is particularly adapted for refinements of structures with large interplanar spacings as well as of complex magnetic structures. In addition to traditional crystal and magnetic structural refinements, studies of phase transitions, thermal expansion, texture analysis, and ab initio structure solution from powder data can be undertaken.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗