Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Simple model analysis on the negative-ion extraction from a plasma

Extraction of negative hydrogen ions from a plasma is analyzed with a view to the description of the extraction region of the negative hydrogen ion-beam sources developed for additional heating of fusion plasmas. The numerical procedure introduced in the study is a modification of the indirect Poisson-Vlasov method. It uses a condition for the plasma meniscus and employs analogy with the particle-in-cell model simulation. The analysis of the results shows that the charged particle velocity distribution at the entrance of the extraction region influences the properties of the extracted beams and its effect should be considered when conditions for well converged beams are looked for through variation in the plasma density and in the potentials of the electrodes of the extraction system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of azimuthally asymmetric reactor components on a parallel plate capacitively coupled plasma

A three-dimensional fluid plasma model is used to investigate the impact of azimuthally asymmetric reactor components on spatial characteristics of parallel plate capacitively coupled plasmas. We consider three scenarios: high frequency (13.56 MHz) argon discharges with, separately, an off-axis circular plate surrounding the bottom electrode and an access port opening in the reactor sidewall, and a very high frequency (162 MHz) argon discharge with nonparallel electrodes. For the reactor with off-axis plate, both the Ar{sup +} density and flux are strongly perturbed toward the direction of maximum grounded surface area, with azimuthal variation in ion flux up to 10%. Perturbations in Ar{sup +} density due to the access port opening are localized to the region near the access port, and the impact on ion flux in the interelectrode region is minimal. Finally, the nonparallel electrodes result in a significant change in the location and shape of the Ar{sup +} density profile, going from a center-peaked discharge with parallel electrodes to a flattened off-center profile when tilted less than 1 deg. with a nominal 5 cm gap.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The photon analysis, delivery, and reduction system at the FERMI-Elettra free electron laser user facility

The FERMI-Elettra free electron laser (FEL) user facility is currently under construction at the Sincrotrone Trieste laboratory in Trieste (Italy). It will cover the wavelength range from 100 to about 5 nm in the fundamental and 3 or 1 nm using the third harmonic. We report the layout of the photon beam diagnostics section, the radiation transport system to the experimental area, and the photon beam distribution system. Due to the peculiar characteristics of the emitted FEL radiation (high peak power, short pulse length, and statistical variation of the emitted intensity and distribution), the realization of the diagnostics system is particularly challenging. The end users are interested in parameters such as the radiation pulse intensity and spectral distribution, as well as in the possibility to attenuate the intensity. In order to accomplish these tasks, a photon analysis, delivery, and reduction system is now under development and construction and is presented here. This system will work on-line producing pulse-resolved information and will let users keep track of the photon beam parameters during the experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A method for evaluations on the radiation trapping in an inductively coupled plasma in argon

One of the general challenges for the evaluation and interpretation of optical emission spectroscopy measurements is the occurrence of radiation trapping, which is also named self-absorption or opacity. A convenient technique to treat radiation trapping is the introduction of a parameter, which is called escape factor and gives a measure for the amount of radiation trapping. In this paper evaluations on the concept of escape factors are presented for an inductively coupled plasma in argon. Especially, the strong argon line at 811.53 nm, which arises from the transition of 2p{sub 9}-1s{sub 5}, is under consideration. To estimate escape factors for this line, a particular method is proposed and presented here. First experimental results are obtained under the restrictive assumptions that transitions into the resonant levels 1s{sub 2} and 1s{sub 4} are sufficiently optically thin and ratios of population densities are constant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical studies of powerful terahertz pulse generation from a super-radiant surface wave oscillator

The results of theoretical and numerical studies of coherent stimulated terahertz radiation from intense, subnanosecond electron beam are presented. The mechanism of terahertz pulse generation is associated with self-bunching of the beam and slippage of the wave over the whole electron flow. This so called Cherenkov super-radiance (SR) is used to propose a compact terahertz generator with high peak power. A large cross-section (overmoded), slow wave structure is designed to support the high power handling capability, and the mode competition is avoided by operating the device in the surface wave status. With 2.5 D particle-in-cell simulation, the 'hot' characteristics of the proposed super-radiant terahertz generator are investigated, and the numerical results show that the SR peak power could be further increased by optimizing the amplitude profile of electron pulse. Under the condition of 0.5 ns pulsewidth, 500 kV voltage, and 1.5 kA current, the 110 ps, 680 MW, and 0.14 THz SR pulse is achieved with a power efficiency of 90.67% in TM{sub 01} mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature distributions of radio-frequency plasma in water by spectroscopic analysis

Distributions of emission intensity from radicals, electron temperature, and rotational temperature at a radio frequency of 27.12 MHz plasma in water are clarified by detailed spectroscopy measurement. Through this investigation, the following were observed. The points of maximum emission intensity of Halpha, Hbeta, O (777 nm), and O (845 nm) are almost the same, while that of OH shifts upward. The electron temperature decreases, while the rotational temperature increases with pressure. The distribution of the electron temperature changes at a threshold pressure, which is concerned with a change in the electron discharge mechanism. The self-bias of the electrode changes from a negative to positive at a threshold pressure. The point of the maximum rotational temperature of OH radicals shifts to approximately 1 mm above that for the maximum intensity of OH emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simplified one-dimensional calculation of 13.5 nm emission in a tin plasma including radiation transport

Many next generation lithography schemes for the semiconductor industry are based on a 13.5 nm tin plasma light source, where hundreds of thousands of 4d-4f, 4p-4d, and 4d-5p transitions from Sn{sup 5+}-Sn{sup 13+} ions overlap to form an unresolved transition array. To aid computation, transition arrays are treated statistically, and Hartree-Fock results are used to calculate radiation transport in the optically thick regime with a one-dimensional Lagrangian plasma hydrodynamics code. Time-dependent spectra and conversion efficiencies of 2% in-band 13.5 nm emission to laser energy are predicted for a Nd:YAG (yttrium aluminum garnet) laser incident on a pure tin slab target as a function of laser power density and pulse duration at normal incidence. Calculated results showed a maximum conversion efficiency of 2.3% for a 10 ns pulse duration at 8.0x10{sup 10} W/cm{sup 2} and are compared to experimental data where available. Evidence for the need to include lateral expansion is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotopic anomaly for carbon ions in an electron cyclotron resonance ion source

In many experiments methods were applied to increase the highly charged ion output from an electron cyclotron resonance ion source; the gas-mixing method is still generally being applied. The dominant role of the masses of the ions in the gas-mixture was apparent. Two basically differing mechanisms could to first order explain most of the observations. A significant mass effect showed up in a mixture of oxygen isotopes, the so-called oxygen anomaly; so far that effect could be explained in zeroth order only. The anomaly was observed later for nitrogen isotopes as well. In the present experiment it is shown that the anomaly also exists for carbon isotopes, where the necessity of feeding the source with carbon-hydrogen compounds brings about an essential different experimental fact.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A New Approach to the Coronal Heating Problem

The heating of the solar corona is discussed within both frameworks of kinetic and fluid drift wave theory. It is shown that the basic ingredient necessary for the heating is the presence of the background density gradients in the direction perpendicular to the magnetic field vector. These gradients are a source of free energy for the electrostatic instabilities. Strongly growing modes are found for some typical coronal plasma parameters. The instabilities a) imply the presence of electric fields that can accelerate the plasma particles in both the perpendicular and the parallel direction with respect to the magnetic field vector, and b) can stochastically heat ions. The stochastic heating i) is due to the electrostatic nature of the waves, ii) is more effective on ions than on electrons, iii) acts predominantly in the perpendicular direction, iv) heats heavier ions more efficiently than lighter ions, and v) may easily provide a drift wave heating rate that is orders of magnitude above the value that is presently believed to be sufficient for heating the solar corona.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A laser interferometer for measuring straightness and its position based on heterodyne interferometry

Not only the magnitude but also the position of straightness errors are of concern to users. However, current laser interferometers used for measuring straightness seldom give the relative position of the straightness error. To solve this problem, a laser interferometer for measuring straightness and its position based on heterodyne interferometry is proposed. The optical configuration of the interferometer is designed and the measurement principle is analyzed theoretically. Two experiments were carried out. The first experiment verifies the validity and repeatability of the interferometer by measuring a linear stage. Also, the second one for measuring a flexure-hinge stage demonstrates that the interferometer is capable of nanometer measurement accuracy. These results show that this interferometer has advantages of simultaneously measuring straightness error and the relative position with high precision, and a compact structure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Determination of the electron temperature by optical emission spectroscopy in a 13.56 MHz dusty methane plasma: Influence of the power

Optical emission spectroscopy is applied to the study of a radiofrequency (13.56 MHz) discharge in methane used to obtain hydrogenated carbon films and particles. The methane dissociation allows the creation of species in the plasma bulk as H{sub 2}, H, and CH. The emission lines of these species are studied as a function of time and of incident rf power. The electron temperature is determined from the two line radiance ratio method and the corona balance model using the Balmer lines (H{sub alpha}, H{sub beta}, and H{sub gamma}). The incident rf power enhancement in the range 40-120 W leads to the increase in the emission line intensities as the electron temperature decreases. The temporal variations of CH and hydrogen emission lines, of the dc self-bias voltage, and of the electron temperature are correlated both with the particle behavior and growth in the plasma, and with the coating that grows onto the powered electrode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid simulation of electrode plasmas in high-power diodes

New numerical techniques for simulating the formation and evolution of cathode and anode plasmas have been successfully implemented in a hybrid code. The dynamics of expanding electrode plasmas has long been recognized as a limiting factor in the impedance lifetimes of high-power vacuum diodes and magnetically insulated transmission lines. Realistic modeling of such plasmas is being pursued to aid in understanding the operating characteristics of these devices as well as establishing scaling relations for reliable extrapolation to higher voltages. Here, in addition to kinetic and fluid modeling, a hybrid particle-in-cell technique is described that models high density, thermal plasmas as an inertial fluid which transitions to kinetic electron or ion macroparticles above a prescribed energy. The hybrid technique is computationally efficient and does not require resolution of the Debye length. These techniques are first tested on a simple planar diode then applied to the evolution of both cathode and anode plasmas in a high-power self-magnetic pinch diode. The impact of an intense electron flux on the anode surface leads to rapid heating of contaminant material and diode impedance loss.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stopping power of a buffer gas for laser plasma debris mitigation

The stopping power of a buffer gas against laser-plasma debris is quantitatively assessed by means of visualization techniques. For ablation of planar tin targets in an Ar ambient, an expanding wavefront was visualized, whose translation energy was rapidly reduced within a few millimeters above the target surface. The fastest debris component was along the normal to the target with an initial kinetic energy of 1.1 keV. The buffer gas efficiency changed in a line-of-sight-dependent way, thermalizing more efficiently the on-axis components. The maximum stopping power of the gas buffer was determined as high as 0.4 keV/mm. Due to the reduction in stopping power, nonlinearly with the debris kinetic energy, a gas buffer thickness of 10 mm is required at the studied atmospheric pressure in order to mitigate high energy debris below a fiducial threshold of 0.1 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduction of inward momentum flux by damped eigenmodes

The inward momentum flux driven by the off-diagonal pressure gradient in a fluid model for ion temperature gradient turbulence with large Richardson number is significantly reduced by the excitation of stable eigenmodes. This is accomplished primarily through the amplitude autocorrelation of the damped eigenmode, which, in the flux, directly counteracts the quasilinear contribution of the unstable eigenmode. Stable eigenmode cross correlations also contribute to the flux, but the symmetry of conjugate pairing of growing and damped eigenmodes leads to significant cancellations between cross correlation terms. Conjugate symmetry is a property of unstable wavenumbers but applies to the whole of the saturated state because damped eigenmodes in the unstable range prevent the spread of energy outside that range. The heat and momentum fluxes are nearly isomorphous when expressed in terms of the eigenmode correlations. Due to this similarity of form, the thermodynamic constraint, which keeps the heat flux outward even when significantly reduced by the damped eigenmode, results in a momentum flux that remains inward, even though it is also reduced by the damped eigenmode. The isomorphism is not perfect. When the contribution of stable eigenmode cross correlations to the flux do not cancel, the momentum flux can reverse sign and become outward.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stationary nontearing inertial scale electron magnetohydrodynamic instability

Two-dimensional stationary nontearing inertial scale electron magnetohydrodynamic (EMHD) instability is described. The physical mechanism of the instability is illustrated. Analytical asymptotic estimate of the growth rate is provided and verified with a numerical calculation of the instability, also describing the characteristic structure of the eigenmode. Natural occurrence of the instability is demonstrated in a nonlinear EMHD simulation of a system undergoing magnetic reconnection, where the instability manifests itself on the outflow side of the magnetic field separatrix and may affect the self-determined length of the layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The ionization length in plasmas with finite temperature ion sources

The ionization length is an important quantity which up to now has been precisely determined only in plasmas which assume that the ions are born at rest, i.e., in discharges known as 'cold ion-source' plasmas. Presented here are the results of our calculations of the ionization lengths in plasmas with an arbitrary ion source temperature. Harrison and Thompson (H and T) [Proc. Phys. Soc. 74, 145 (1959)] found the values of this quantity for the cases of several ion strength potential profiles in the well-known Tonks-Langmuir [Phys. Rev. 34, 876 (1929)] discharge, which is characterized by 'cold' ion temperature. This scenario is also known as the 'singular' ion-source discharge. The H and T analytic result covers cases of ion sources proportional to exp(betaPHI) with PHI the normalized plasma potential and beta=0,1,2 values, which correspond to particular physical scenarios. Many years following H and T's work, Bissell and Johnson (B and J) [Phys. Fluids 30, 779 (1987)] developed a model with the so-called 'warm' ion-source temperature, i.e., 'regular' ion source, under B and J's particular assumption that the ionization strength is proportional to the local electron density. However, it appears that B and J were not interested in determining the ionization length at all. The importance of this quantity to theoretical modeling was recognized by Riemann, who recently answered all the questions of the most advanced up-to-date plasma-sheath boundary theory with cold ions [K.-U. Riemann, Phys. Plasmas 13, 063508 (2006)] but still without the stiff warm ion-source case solution, which is highly resistant to solution via any available analytic method. The present article is an extension of H and T's results obtained for a single point only with ion source temperature T{sub n}=0 to arbitrary finite ion source temperatures. The approach applied in this work is based on the method recently developed by Kos et al. [Phys. Plasmas 16, 093503 (2009)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Elimination of drift in a fiber-Bragg-grating-based multiplexed Michelson interferometer measurement system

Random phase drift in single-mode optical fiber interferometers used with measurement systems, which is resulted from various types of environmental disturbances, should be eliminated in order to obtain high measurement precision. We propose an optical fiber interferometric measurement system which has the function of self-eliminating the random phase drift and is stable and robust enough for real-time precision measurement. By employing the characteristics of fiber Bragg gratings, the system interleaves two fiber Michelson interferometers together that share the common-interferometric-optical path. The signal of one of the interferometers is used to stabilize the system while the signal of the other interferometer is used for measurement. An electronic feedback loop for the stabilizing action is designed. The bandwidth of the feedback loop is 5 kHz, sufficiently wide to eliminate random phase drift resulted from various environmental disturbances. The system is endowed with high stability and therefore suitable for real-time precision measurement. By means of an active phase tracking technique to measure displacement, the linear regression coefficient of the displacement measurement results is 0.9998.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficiency enhancement of a two-beam free-electron laser

A local and nonlinear simulation of two-beam and tapered free-electron laser (FEL) is presented self-consistently. The slippage of the electromagnetic wave with respect to the electron beam is ignored and the relativistic electron beams are assumed to be cold. The fundamental resonance and the third harmonic radiation of the beam with lower energy are considered, in which the third harmonic is at the fundamental resonance of the beam with higher energy. The wiggler field is set to decrease linearly when the radiation of the third harmonic saturates. The optimum starting point of tapering and the slope of the reduction in the amplitude of wiggler are found by successive run of the code. Using the slowly varying envelope approximation, a set of nonlinear equations is derived which describes this system. These equations are solved numerically by the Runge-Kutta method. This method can be used to improve the efficiency of the two-beam FEL in the extreme ultraviolet and x-ray regions of spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗