Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Lattice parameter variations during aging in nickel-base superalloys

The importance of the state of coherency on measurements of gamma/gamma-prime lattice mismatch has been experimentally demonstrated during aging at 1000 C of specimens of an alloy with composition Ni-(8.6)Cr-(5.3)Al-(10.1)Co-(11.7)W-(1.2)Ti-(0.7)Mo (wt pct). Lattice parameter measurements are given as a function of aging time, and the corresponding sample microstructures are presented. The results show that changes of the two phases during aging did not influence the lattice parameter measurements, indicating that aging specimens to produce a semicoherent gamma/gamma-prime structure provides a good approximation of the true, unconstrained lattice mismatch.

Nathal, M. V.↗

Aerodynamic optimization by simultaneously updating flow variables and design parameters with application to advanced propeller designs

A scheme is developed for solving constrained optimization problems in which the objective function and the constraint function are dependent on the solution of the nonlinear flow equations. The scheme updates the design parameter iterative solutions and the flow variable iterative solutions simultaneously. It is applied to an advanced propeller design problem with the Euler equations used as the flow governing equations. The scheme's accuracy, efficiency and sensitivity to the computational parameters are tested.

Rizk, Magdi H.↗

Accurate solutions, parameter studies and comparisons for the Euler and potential flow equations

Parameter studies are conducted using the Euler and potential flow equation models for steady and unsteady flows in both two and three dimensions. The Euler code is an implicit, upwind, finite volume code which uses the Van Leer method of flux vector splitting which has been recently extended for use on dynamic meshes and maintain all the properties of the original splitting. The potential flow code is an implicit, finite difference method for solving the transonic small disturbance equations and incorporates both entropy and vorticity corrections into the solution procedures thereby extending its applicability into regimes where shock strength normally precludes its use. Parameter studies resulting in benchmark type calculations include the effects of spatial and temporal refinement, spatial order of accuracy, far field boundary conditions for steady flow, frequency of oscillation, and the use of subiterations at each time step to reduce linearization and factorization errors. Comparisons between Euler and potential flow results are made, as well as with experimental data where available.

Anderson, W. Kyle↗

Observation model and parameter partials for the JPL geodetic GPS modeling software GPSOMC

The physical models employed in GPSOMC and the modeling module of the GIPSY software system developed at JPL for analysis of geodetic Global Positioning Satellite (GPS) measurements are described. Details of the various contributions to range and phase observables are given, as well as the partial derivatives of the observed quantities with respect to model parameters. A glossary of parameters is provided to enable persons doing data analysis to identify quantities in the current report with their counterparts in the computer programs. There are no basic model revisions, with the exceptions of an improved ocean loading model and some new options for handling clock parametrization. Such misprints as were discovered were corrected. Further revisions include modeling improvements and assurances that the model description is in accord with the current software.

Sovers, O. J.↗

A novel multistage estimation of the signal parameters of a possibly data-modulated sinusoid under very high dynamics

A novel multistage estimation scheme is presented for estimating the parameters of a received carrier signal possibly phase-modulated by unknown data, and experiencing very high Doppler, Doppler rate, etc. Such a situation arises, for example, in the case of Global Positioning Systems (GPS) where the signal parameters are directly related to the position, velocity, acceleration and jerk of the GPS receiver. In the proposed multistage scheme, the first stage estimator operates as a coarse estimator resulting in higher rms estimation errors but with a relatively small probability of the frequency estimation error exceeding one-half of the sampling frequency (an event termed cycle slip). The second state of the estimator operates on the error signal available from the first stage, refining the overall estimates, and in the process also reduces the number of cycle slips. The first stage algorithm is selected to be a modified least squares algorithm operating upon the differential signal model and referred to as differential least squares. This estimation stage provides relatively coarse estimates of the frequency and its derivatives. The second algorithm is simply an extended Kalman filter which also yields the estimate of the phase along with a more refined estimate of frequency as well. A major advantage of the proposed algorithm is a reduction in the threshold on received carrier power-to-noise power spectral density ratio as compared to the threshold achievable by either of these algorithms alone. In fact, it appears from the simulations that for the case of an unmodulated carrier, the proposed scheme achieves the same threshold as for an almost exact and computationally intensive implementation of the maximum likelihood estimator.

Kumar, Rajendra↗

A hybrid perturbation-Galerkin method for differential equations containing a parameter

A two-step hybrid perturbation-Galerkin method to solve a variety of differential equations which involve a parameter is presented and discussed. The method consists of: (1) the use of a perturbation method to determine the asymptotic expansion of the solution about one or more values of the parameter; and (2) the use of some of the perturbation coefficient functions as trial functions in the classical Bubnov-Galerkin method. This hybrid method has the potential of overcoming some of the drawbacks of the perturbation method and the Bubnov-Galerkin method when they are applied by themselves, while combining some of the good features of both. The proposed method is illustrated first with a simple linear two-point boundary value problem and is then applied to a nonlinear two-point boundary value problem in lubrication theory. The results obtained from the hybrid method are compared with approximate solutions obtained by purely numerical methods. Some general features of the method, as well as some special tips for its implementation, are discussed. A survey of some current research application areas is presented and its degree of applicability to broader problem areas is discussed.

Geer, James F.↗

Short- and long-term determination of the TDRS solar reflectivity parameter using the Goddard trajectory determination system

Two aspects of the orbit determination of the Tracking and Data Relay Satellite-East (TDRS-E) are considered. The TDRS-E solar reflectivity parameter, as it affects the accuracy of the determination and propagation of the TDRS-E geosynchronous orbit, varies seasonally due to the changing declination of the sun. Orbit solutions are carried out using varying tracking data arc lengths to ascertain the minimum arc length needed for an accurate determination of the TDRS-E orbital elements and the solar reflectivity parameter.

Bobrowsky, M.↗

Effects of operating parameters on PAFC stack performance

This work was performed to assess actual relationships of phosphoric acid fuel cell voltage responses obtained from subscale cells with air-cooled and full size cells in stacks as a function of operating parameters. Key relationships were verified and found to be in agreement with the Nerst equation. An empirical equation was developed to predict cell voltages as a function of the measureable parameters.

Le, M. T.↗

Correlation studies between solar wind parameters and the decimetric radio emission from Jupiter

Results of a study comparing long-term time variations in Jupiter's synchrotron radio emission with a variety of solar wind parameters and the 10.7 cm solar flux are reported. Data from 1963 through 1985 were analyzed, and the results suggest that many solar wind parameters are correlated with the intensity of the synchrotron emission produced by the relativistic electrons in the Jovian Van Allen radiation belts. Significant nonzero correlation coefficients appear to be associated with solar wind ion density, ram pressure, thermal pressure, flow velocity, momentum, and ion temperature. The implication of these results is that the solar wind is influencing the supply and/or loss of electrons to Jupiter's inner magnetosphere.

Bolton, S. J.↗

A theoretical framework for convergence and continuous dependence of estimates in inverse problems for distributed parameter systems

Numerical techniques for parameter identification in distributed-parameter systems are developed analytically. A general convergence and stability framework (for continuous dependence on observations) is derived for first-order systems on the basis of (1) a weak formulation in terms of sesquilinear forms and (2) the resolvent convergence form of the Trotter-Kato approximation. The extension of this framework to second-order systems is considered.

Banks, H. T.↗

A CMOS matrix for extracting MOSFET parameters before and after irradiation

An addressable matrix of 16 n- and 16 p-MOSFETs was designed to extract the dc MOSFET parameters for all dc gate bias conditions before and after irradiation. The matrix contains four sets of MOSFETs, each with four different geometries that can be biased independently. Thus the worst-case bias scenarios can be determined. The MOSFET matrix was fabricated at a silicon foundry using a radiation-soft CMOS p-well LOCOS process. Co-60 irradiation results for the n-MOSFETs showed a threshold-voltage shift of -3 mV/krad(Si), whereas the p-MOSFETs showed a shift of 21 mV/krad(Si). The worst-case threshold-voltage shift occurred for the n-MOSFETs, with a gate bias of 5 V during the anneal. For the p-MOSFETs, biasing did not affect the shift in the threshold voltage. A parasitic MOSFET dominated the leakage of the n-MOSFET biased with 5 V on the gate during irradiation. Co-60 test results for other parameters are also presented.

Blaes, B. R.↗

A three-parameter asteroid taxonomy

Broadband U, V, and x photometry together with IRAS asteroid albedos have been used to construct an asteroid classification system. The system is based on three parameters (U-V and v-x color indices and visual geometric albedo), and it is able to place 96 percent of the present sample of 357 asteroids into 11 taxonomic classes. It is noted that all but one of these classes are analogous to those previously found using other classification schemes. The algorithm is shown to account for the observational uncertainties in each of the classification parameters.

Tedesco, Edward F.↗

Quasi-Newton methods for parameter estimation in functional differential equations

A state-space approach to parameter estimation in linear functional differential equations is developed using the theory of linear evolution equations. A locally convergent quasi-Newton type algorithm is applied to distributed systems with particular emphasis on parameters that induce unbounded perturbations of the state. The algorithm is computationally implemented on several functional differential equations, including coefficient and delay estimation in linear delay-differential equations.

Brewer, Dennis W.↗

Parameter estimation technique for boundary value problems by spline collocation method

A parameter-estimation technique for boundary-integral equations of the second kind is developed. The output least-squares identification technique using the spline collocation method is considered. The convergence analysis for the numerical method is discussed. The results are applied to boundary parameter estimations for two-dimensional Laplace and Helmholtz equations.

Kojima, Fumio↗

Minnaert photometric parameters for the satellites of Uranus

After deriving the Minnaert (1961) parameters for the five largest satellites of Uranus as functions of both wavelength and phase angle, the well-documented case of Titania is invoked to assess the usefulness of the Minnaert description vs the more rigorous approach of Hapke (1981). While the limb-darkening Minnaert parameter k possesses only a weak wavelength dependence, it exhibits a strong dependence on phase angle that varies to some extent from satellite to satellite; in the case of Titania, this dependence is similar to that for the earth's moon.

Veverka, J.↗

Parameter identification for vibration control of SCOLE

A least-squares identification method has been used to derive an empirical model of the vibrational dynamics of the Spacecraft Control Laboratory Experiment, an apparatus for testing parameter identification and control schemes for large flexible space structures. Testing is performed by exciting the structure with torque wheels. Linear least-squares analysis is employed to obtain the parameters that best fit the output of an autoregressive model to the data, and to determine the control effectiveness of the torque wheels using the excitation portion of the test data.

Sparks, D. W., Jr.↗

Estimation of aircraft aerodynamic parameters from flight data

Several ways for obtaining aerodynamic parameters of an aircraft from flight data are presented. A brief description of data analysis from steady measurements is given, and a concept of system identification is introduced. This is followed by a mathematical model of an aircraft with aerodynamic forces and moments approximated either by polynomials or splines and a detailed treatment of two often-used techniques for parameter estimation. Because of renewed interest in frequency-domain analysis, one section of the paper is devoted to this problem. The methods are demonstrated in several examples using real flight data.

Klein, Vladislav↗

Problems associated with the measurement of coherence parameters - Superelastic electron scattering by laser-excited Ba-138(...6s6p1P1) atoms

Measurements of superelastic scattering of electrons by laser-excited Ba-138(...6s6p1P1) atoms were carried out. An asymmetry observed has been explained using a model of scattering from a target with finite dimensions. This model employed coherence parameters which were calculated in the distorted-wave approximation. The results indicated that the interpretation of coherence experiments in terms of scattering from a pointlike target can lead to serious errors in the deduction of coherence parameters at low scattering angles.

Zetner, P. W.↗