Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Large three-photon absorption in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} films studied using Z-scan technique

Large picosecond nonlinearities in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films, grown at different temperatures in situ on (100) MgO substrates using rf magnetron sputtering technique, were studied using the Z-scan technique. The nonlinear absorption mechanism, studied near 800 nm using approx2 and 25 ps pulses, switched from reverse saturable absorption type in the films deposited at temperature<600 deg. C to three-photon absorption (3PA) in the films deposited at temperature>600 deg. C. The magnitude of the 3PA coefficient was estimated to be approx10{sup -21} cm{sup 3}/W{sup 2}. Two-photon absorption (2PA) was the dominant mechanism recorded with approx6 ns pulses. The observed behavior is correlated with morphological and crystallographic texture of the films. The linear refractive index and optical band gap of the films have also been calculated and these show a strong dependence on the substrate temperature.

36 MATERIALS SCIENCE↗

Tight bounds on the eavesdropping of a continuous-variable quantum cryptographic protocol with no basis switching

The Gaussian continuous-variable quantum key distribution protocol based on coherent states and heterodyne detection [Phys. Rev. Lett. 93, 170504 (2004)] has the advantage that no active random basis switching is needed on the receiver's side. Its security is, however, not very satisfyingly understood today because the bounds on the secret key rate that have been derived from Heisenberg relations are not attained by any known scheme. Here, we address the problem of the optimal Gaussian individual attack against this protocol, and derive tight upper bounds on the information accessible to an eavesdropper. Interestingly, this protocol is proven to be even more resistant to individual attacks than originally thought. Optical schemes achieving these bounds are also exhibited, which concludes the security analysis of Gaussian protocols against individual attacks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Frontiers of in situ electron microscopy

In situ transmission electron microscopy (TEM) has become an increasingly important tool for materials characterization. It provides key information on the structural dynamics of a material during transformations and the correlation between structure and properties of materials. With the recent advances in instrumentation, including aberration corrected optics, sample environment control, the sample stage, and fast and sensitive data acquisition, in situ TEM characterization has become more and more powerful. In this article, a brief review of the current status and future opportunities of in situ TEM is included. It also provides an introduction to the six articles covered by in this issue of MRS Bulletin explore the frontiers of in situ electron microscopy, including liquid and gas environmental TEM, dynamic four-dimensional TEM, nanomechanics, ferroelectric domain switching studied by in situ TEM, and state-of-the-art atomic imaging of light elements (i.e., carbon atoms) and individual defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of high optical contrast in zinc-zinc oxide electrodeposits for dynamic windows

The control of solar light and heat emission through windows is an important strategy for increasing the energy efficiency of buildings. Reversible Zn electrodeposition has recently emerged as a promising method for constructing electronically tintable robust dynamic windows. In Zn electrodeposits formed from dimethyl sulfoxide (DMSO) electrolytes during device tinting, we observe extraordinary absorption that is in excess of what is predicted by the Beer-Lambert law for a uniform Zn thin film. Here, the charge required to electroplate these films is abnormally low, significantly less than previously reported dynamic windows based on reversible metal electrodeposition, which facilitates the construction of large-area devices that switch uniformly. Finite-difference time-domain (FDTD) simulations are used to investigate the origin of this enhanced absorption, which arises from plasmonic effects among the Zn nanoparticles and ZnO dendrites in the film. The dielectric ZnO dendrites promote absorption via slit-like Zn-dielectric-Zn structures that from hybrid surface plasmon resonance at metal walls. Through these investigations, we provide design principles to construct low-charge and high-contrast metal and metal oxide-based dynamic windows.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

PROBING THE BALANCE OF AGN AND STAR-FORMING ACTIVITY IN THE LOCAL UNIVERSE WITH ChaMP

The combination of the Sloan Digital Sky Survey (SDSS) and the Chandra Multiwavelength Project (ChaMP) currently offers the largest and most homogeneously selected sample of nearby galaxies for investigating the relation between X-ray nuclear emission, nebular line emission, black hole masses, and properties of the associated stellar populations. We provide X-ray spectral fits and valid uncertainties for all the galaxies with counts ranging from 2 to 1325 (mean 76, median 19). We present here novel constraints that both X-ray luminosity L{sub X} and X-ray spectral energy distribution bring to the galaxy evolutionary sequence H II -> Seyfert/Transition Object -> LINER -> Passive suggested by optical data. In particular, we show that both L{sub X} and GAMMA, the slope of the power law that best fits the 0.5-8 keV spectra, are consistent with a clear decline in the accretion power along the sequence, corresponding to a softening of their spectra. This implies that, at z approx 0, or at low-luminosity active galactic nucleus (AGN) levels, there is an anticorrelation between GAMMA and L/L {sub edd}, opposite to the trend exhibited by high z AGN (quasars). The turning point in the GAMMA-L/L{sub edd} LLAGN + quasars relation occurs near GAMMA approx 1.5 and L/L{sub edd} approx 0.01. Interestingly, this is identical to what stellar mass X-ray binaries exhibit, indicating that we have probably found the first empirical evidence for an intrinsic switch in the accretion mode, from advection-dominated flows to standard (disk/corona) accretion modes in supermassive black hole accretors, similar to what has been seen and proposed to happen in stellar mass black hole systems. The anticorrelation we find between GAMMA and L/L{sub edd} may instead indicate that stronger accretion correlates with greater absorption. Therefore, the trend for softer spectra toward more luminous, high redshift, and strongly accreting (L/L{sub edd} approx> 0.01) AGNs/quasars could simply be the result of strong selection biases reflected in the dearth of type 2 quasar detections.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin precession modulation in a magnetic bilayer

We report on modulation of the spin precession in a Co/garnet bilayer by femtosecond laser excitation using time-resolved magneto-optical tools. Damped oscillations in the Faraday rotation transients representing precessional motion of the magnetization vector are observed in both the 2 nm Co layer and 1.8 {mu}m garnet of the bilayer with distinct frequencies differing by about a factor of two. The excitation efficiency of these precessions strongly depends on the out-of-plane magnetic field. The modulation effect with the coupling in a magnetic bilayer can be useful for non-thermally controlling the magnetization of nanomagnets and ultrafast switching in magnetic nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of carrier behavior in photonically excited 6H silicon carbide exhibiting fast, high voltage, bulk transconductance properties

Abstract Unabated, worldwide trends in CO 2 production project growth to > 43-BMT per year over the next two decades. Efficient power electronics are crucial to fully realizing the CO 2 mitigating benefits of a worldwide smart grid (~ 18% reduction for the United States alone). Even state-of-the-art SiC high voltage junction devices are inefficient because of slow transition times (~ 0.5-μs) and limited switching rates at high voltage (~ 20-kHz at ≥ 15-kV) resulting from the intrinsically limited charge carrier drift speed (< 2 × 10 7 -cm-s −1 ). Slow transition times and limited switch rates waste energy through transition loss and hysteresis loss in external magnetic components. Bulk conduction devices, where carriers are generated and controlled nearly simultaneously throughout the device volume, minimize this loss. Such devices are possible using below bandgap excitation of semi-insulating (SI) SiC single crystals. We explored carrier dynamics with a 75-fs single wavelength pump/supercontinuum probe and a modified transient spectroscopy technique and also demonstrated a new class of efficient, high-speed, high-gain, bi-directional, optically-controlled transistor-like power device. At a performance level six times that of existing devices, for the first time we demonstrated prototype operation at multi-10s of kW and 20-kV, 125-kHz in a bulk conduction transistor-like device using direct photon-carrier excitation with below bandgap light.

36 MATERIALS SCIENCE↗

Effects of Growth Temperature on Epitaxial Thin Films of Vanadium Dioxide Grown by Pulsed Laser Deposition

Stoichiometric vanadium dioxide in all of its bulk, thin film and nanostructured forms exhibits an insulator-to-metal transition (IMT) accompanied by structural change, induced by various physical and chemical stimuli such as temperature, ultrashort light pulses, electric field, doping or strain. In these applications, the optical qualities of the films are of paramount importance, but are often highly variable depending on fabrication procedure. We have grown epitaxial films of vanadium dioxide on c-plane (0001) of sapphire using two different procedures involving room temperature growth followed by annealing and direct high temperature growth. Strain at the interface of the substrate and the film due to growth at different temperatures leads to significant differences in morphologies and phase transition characteristics. We present a comparative study of the morphologies and switching characteristics of the two films and conclude that contrary to conventional wisdom, the room-temperature grown films have smoother, more continuous morphologies and better switching performance. Our observation is supported by theoretical and experimental studies of epitaxial growth of semiconductors.

36 MATERIALS SCIENCE↗

Micro- and nanodomain imaging in uniaxial ferroelectrics: Joint application of optical, confocal Raman, and piezoelectric force microscopy

The application of the most effective methods of the domain visualization in model uniaxial ferroelectrics of lithium niobate (LN) and lithium tantalate (LT) family, and relaxor strontium-barium niobate (SBN) have been reviewed in this paper. We have demonstrated the synergetic effect of joint usage of optical, confocal Raman, and piezoelectric force microscopies which provide extracting of the unique information about formation of the micro- and nanodomain structures. The methods have been applied for investigation of various types of domain structures with increasing complexity: (1) periodical domain structure in LN and LT, (2) nanodomain structures in LN, LT, and SBN, (3) nanodomain structures in LN with modified surface layer, (4) dendrite domain structure in LN. The self-assembled appearance of quasi-regular nanodomain structures in highly non-equilibrium switching conditions has been considered.

36 MATERIALS SCIENCE↗

Effect of Thin-Film Adhesives on Mode I Interlaminar Fracture Toughness in Carbon Fiber Composites with Shape Memory Alloy Inserts

A single sheet of NiTi shape memory alloy (SMA) was introduced within a unidirectional HexPly® 8552/IM7 (Hexcel®) polymer matrix composite (PMC) panel in conjunction with multiple thin-film adhesives to promote the interfacial bond strength between the SMA and PMC. A double cantilever beam (DCB) test was performed in accordance with the ASTM D5528 method for evaluation of Mode I interlaminar fracture toughness of unidirectional fiber-reinforced PMCs. The modal acoustic emissions (MAEs) were monitored during testing with two acoustic sensors attached to the specimens. The composite panels were subjected to a C-scan before testing and examined using optical and scanning electron microscopy (SEM) techniques after part failure. The data were used in conjunction with modified beam theory (MBT), the compliance calibration (CC) method, and the modified compliance calibration (MCC) method. The Mode I interlaminar toughness (G(sub IC)) values for control specimens were higher than previously reported and are attributed to extensive fiber bridging during testing. The presence of adhesives with SMA inserts stabilized crack propagation during DCB testing. The results reveal a new phenomenon of SMA bridging, whereby crack propagation would switch from one side of the SMA insert to the other, thus increasing the load and G(sub IC) values of specimens containing SMA.

shape memory alloys↗

High-performance photonic transformers for DC voltage conversion

Abstract Direct current (DC) converters play an essential role in electronic circuits. Conventional high-efficiency DC voltage converters, especially step-up type, rely on switching operation, where energy is periodically stored within and released from inductors and/or capacitors connected in a variety of circuit topologies. Since these energy storage components, especially inductors, are fundamentally difficult to scale down, miniaturization of switching converters proves challenging. Furthermore, the resulting switching currents produce significant electromagnetic noise. To overcome the limitations of switching converters, photonic transformers, where voltage conversion is achieved through light emission and detection processes, have been demonstrated. However, the demonstrated efficiency is significantly below that of the switching converter. Here we perform a detailed balance analysis and show that with a monolithically integrated design that enables efficient photon transport, the photonic transformer can operate with a near-unity conversion efficiency and high voltage conversion ratio. We validate the theory with a transformer constructed with off-the-shelf discrete components. Our experiment showcases near noiseless operation and a voltage conversion ratio that is significantly higher than obtained in previous photonic transformers. Our findings point to the possibility of a high-performance optical solution to miniaturizing DC power converters and improving the electromagnetic compatibility and quality of electrical power.

42 ENGINEERING↗

High spatial resolution upgrade of the electron cyclotron emission radiometer for the DIII-D tokamak

The 40-channel DIII-D electron cyclotron emission (ECE) radiometer provides measurements of T{sub e}(r,t) at the tokamak midplane from optically thick, second harmonic X-mode emission over a frequency range of 83–130 GHz. The frequency spacing of the radiometer's channels results in a spatial resolution of ∼1–3 cm, depending on local magnetic field and electron temperature. A new high resolution subsystem has been added to the DIII-D ECE radiometer to make sub-centimeter (0.6–0.8 cm) resolution T{sub e} measurements. The high resolution subsystem branches off from the regular channels’ IF bands and consists of a microwave switch to toggle between IF bands, a switched filter bank for frequency selectivity, an adjustable local oscillator and mixer for further frequency down-conversion, and a set of eight microwave filters in the 2–4 GHz range. Higher spatial resolution is achieved through the use of a narrower (200 MHz) filter bandwidth and closer spacing between the filters’ center frequencies (250 MHz). This configuration allows for full coverage of the 83–130 GHz frequency range in 2 GHz bands. Depending on the local magnetic field, this translates into a “zoomed-in” analysis of a ∼2–4 cm radial region. Expected uses of these channels include mapping the spatial dependence of Alfven eigenmodes, geodesic acoustic modes, and externally applied magnetic perturbations. Initial T{sub e} measurements, which demonstrate that the desired resolution is achieved, are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CaF{sub 2} ablation plumes as a source of CaF molecules for harmonic generation

Generation of low-order harmonics (third and fifth) of the fundamental radiation of a Q-switched Nd:YAG laser (1064 nm, pulse 15 ns) was observed in a CaF{sub 2} laser ablation plume. The ablation process is triggered by a second Q-switched Nd:YAG laser operating at 532 or 266 nm. In the scheme employed, the fundamental laser beam propagates parallel to the target surface at controllable distance and temporal delay, allowing to the probing of different regions of the freely expanding plume. The intensity of the harmonics is shown to decrease rapidly as the distance to the target is increased, and for each distance, an optimum time delay between the ablating laser pulse and the fundamental beam is found. In situ diagnosis of the plume by optical emission spectroscopy and laser-induced fluorescence serves to correlate the observed harmonic behavior with the temporally and spatially resolved composition and velocity of flight of species in the plume. It is concluded that harmonics are selectively generated by CaF species through a two-photon resonantly enhanced sum-mixing process exploiting the (B {sup 2{Sigma}+}-X {sup 2{Sigma}+}, {Delta}{nu}=0) transition of the molecule in the region of 530 nm. In this work polar molecules have been shown to be the dominating species for harmonic generation in an ablation plume. Implications of these results for the generation of high harmonics in strongly polar molecules which can be aligned in the ablation plasma are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic and Structural Dynamics During the Switching of the Photomagnetic Complex [Fe(L 222 N 5 )(CN) 2 ]

The [Fe(L 222 N 5 )(CN) 2 ] compound, where L 222 N 5 refers to the macrocyclic Schiff-base ligand, 2,13-dimethyl-3,6,9,-12,18-pentaazabicyclo[12.3.1]octadeca-1(18),2,12,14,- 16-pentaene, is a photomagnetic Fe II based coordination compound, which undergoes light-induced excited spin-state trapping (LIESST). The low spin state is hexacoordinated and the high spin state heptacoordinated. This system also serves as complex for the design of trinuclear or one-dimensional compounds made of other types of bricks with diverse coordinated metals. In this work, its ultrafast spin-state photoswitching dynamics are studied, by combining femtosecond optical spectroscopy and femtosecond X-ray absorption measurements at the XPP station of the X-ray free-electron laser LCLS. DFT and TD-DFT calculations are used to interpret experimental findings. These studies, performed in the solution phase, show that LIESST in [Fe(L 222 N 5 )(CN) 2 ] occurs on the 100 fs timescale under different types of photoexcitation. In addition, coherent oscillations were observed, resulting from the structural dynamics accompanying LIESST, which were recently evidenced in more conventional octahedral Fe II N 6 systems.

36 MATERIALS SCIENCE↗