Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “formate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Formation of helices with controllable chirality in gel-fiber composites

While microscale helices with specified chirality are pervasive in biological systems, driving purely synthetic materials to self-organize into such useful structures remains a significant challenge. Through theory and simulations, we model the behavior of initially flat ribbons of gel-fiber composites and show that these materials self-organize into three-dimensional helices with the application of heat. We specifically focus on thermo-responsive gels, which shrink when heated to a point near the lower critical solubility temperature (LCST). Within the composite, regions of the LCST gel that lie far from the fibers can readily shrink in response to the increased temperature; however, near the fibers the network is inhibited from undergoing the heat-induced collapse. This competition between the constrained and the unconstrained regions of the heated sample plays a vital role in the structural evolution of the material. Additionally, we find that this dynamic process can be controlled through the careful placement of the fibers on the outer surface of the gel. We specifically identify fiber arrangements that lead to the formation of helical structures with controlled chirality. Moreover, we isolate scenarios where constraining the movement of one or both the free ends of the sample promotes and stabilizes the formation of helical structures with specified handedness. Such structurally tailored composites are useful for creating mechanically robust actuators, and “appendages” for soft robots that can controllably curl and uncurl with variations in temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights on keto-hydroperoxide formation from O 2 addition to the beta-tetrahydrofuran radical

Cyclic ethers provide an interesting case study of low-temperature oxidation chemistry, especially in relevance to biofuels. A recent experimental study revealed new questions regarding the low-temperature oxidation mechanism of tetrahydrofuran (THF) concerning the formation of keto-hydroperoxides. In particular, keto-hydroperoxides originating from the THF-β radical were not captured accurately by current literature models, motivating this work to calculate the energetics of the first and second O 2 -addition pathways for THF radicals. Electronic structure calculations at the CCSD(T)/cc-pV∞Z//M06-2X/cc-pVTZ level of theory were used to generate potential energy surfaces for the α-C and β-C THF radicals and subsequent pathways to the formation of the keto-hydroperoxide isomers. These are the first theoretical calculations of the second O 2 -addition radical pathways for the THF-β radical. Results from the theorical work provided further insight into the low-temperature oxidation of THF. This included identifying the pathways most likely to form the keto-hydroperoxide isomers observed in prior experimental work; and detecting that the shortcomings in prior models are likely due to uncertainties in R + THF abstraction reaction rates. Here, these conclusions will motivate future work for accurate THF kinetic model development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Soot formation and growth with palladium acetylacetonate-toluene injection in ethylene base flames investigated by in situ synchrotron small-angle X-ray scattering

Organo-Pd compounds as fuel additives are proven to have distinct catalytic effects on enhancing ignition and combustion performance. However, their effects on soot emission and the mechanism are not well-established. In this study, the effect of palladium acetylacetonate (Pd(C 5 H 7 O 2 ) 2 , Pd(acac) 2 ) on soot formation and growth was investigated experimentally. Different concentrations of Pd(acac)2 were added in the ethylene flames. Synchrotron small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) were used to detect the soot particles to obtain the size, shape and morphology information. The results show that the Pd(acac) 2 addition with low concentration (100 ppm) suppresses the formation and growth of the primary soot particles at each height above the burner. As the addition concentration increases to 200 and 300 ppm, the size and volume fraction of the soot particles are decreased at the low flame region, and increased at the high flame region. Furthermore, detailed size distribution, morphology and nanostructure information of the soot particles at different flame heights are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nitrogen evolution, NO X formation and reduction in pressurized oxy coal combustion

Oxy-combustion is one of the most prominent solutions for reducing CO 2 emissions from coal-fired power plants using carbon-capture-and-utilization technology. However, when compared to air combustion at atmospheric pressure, oxy-combustion is very expensive, owing to the significant efficiency penalties associated with air separation, flue gas recirculation (FGR), treatment, compression, and storage or transit of CO 2 . In comparison, pressurized oxy-combustion (POC) is more efficient as it recovers a significant amount of heat energy from the flue gas moistures. Nevertheless, CO 2 derived from pressurized oxy coal combustion has impurities, e.g., acid gases (NO X and SO X ) that can corrode the plant equipment, transport lines as well as deteriorating effect on the environment. Fortunately, in pressurized combustion systems, both NO X and SO X can be scrubbed by a single-column direct contact cooler (DCC), but this requires a minimum ratio of NO X to SO X at the inlet to be efficiently removed. Therefore, NOx is one of the important hindering parameters in commercializing the pressurized oxy-combustion. Although NOx evolution during oxy-coal combustion has been explored extensively at 1 atm, higher pressure studies are rare. Much still needs to be done to better understand the NO X mechanism and the effects of different parameters on NO X emissions under these conditions. Here, this paper reviews the published literature on nitrogen evolution, NO X formation and reduction in pressurized oxy-coal combustion. At higher pressures, the NO X from fuel-bound nitrogen is generated through volatiles, tar and char, all of which are discussed. Where literature is not available, the effect of pressure on NOx evolution in different stages of coal combustion is predicted through CHEMKIN simulation. Homogeneous and heterogeneous pathways of NO X formation and their destruction in pressurized oxy-coal combustion are evaluated. Additionally, the effect of pressure on a few mature and commercialized NOx abatement methods is explored. In the last, the future perspective and recommendation are given. This review will aid in the provision of basic knowledge about NOx evolution and control in pressurized fuel combustion, as well as the identification of new research areas to pursue.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Formation and growth of cerium (III) oxalate nanocrystals by liquid-cell transmission electron microscopy

Using rare earth elements as analogs for actinide series elements enables studying the chemistry of these radioactive materials without the inherent risks. A fundamental understanding of the nucleation and growth of actinide oxalates is crucial for processing nuclear waste. Using in-situ liquid cell TEM (LC-TEM), we show particle attachment processes occurring during the nucleation and growth of cerium oxalate. The early stages of the observed non-classical growth mechanisms have important implications for particle evolution and predictions of final particle morphology. In this work, we observed particle formation via monomer-by-monomer addition or the particle aggregation pathway depending on the selected precursor concentration. At the highest precursor concentration at a high dose rate, we observed particle alignment in a branch structure is due to the interfacial instability. It was demonstrated that in-situ LC-TEM is an invaluable tool in studying the cerium oxalate formation and ultimately a path to understanding actinide chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2020

EXAFS as a probe of actinide oxide formation in the tender X-ray regime

Recent developments in Resonant Inelastic X-Ray Scattering Experiments have vastly improved the resolution in X-ray Spectroscopies such as X-ray Absorption. However, the use of Tender X-rays (~3 keV) and the reactivity of actinides such as uranium have given rise to new questions about bulk and surface sensitivity, what constitutes a surface and how to characterize the formation of an oxide. It will be shown herein that the in situ electron scattering features that are part of the RIXS spectrum can be used to quantify the uranium oxide formation and determine cleanliness, independently of the near edge features that provide information about the unoccupied electronic density of states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CO–induced roughening of Cu(111): formation and detection of reactive nanoclusters on metal surfaces

The formation of nanoclusters on metal surfaces in the presence of reactive environments is a phenomenon with important implications for catalysis. These nanoclusters are composed of atoms ejected from undercoordinated sites such as step edges, and their presence alters the catalytic properties of solid materials. We perform density functional theory (DFT) and kinetic Monte Carlo (KMC) simulations to investigate the formation and reactivity of copper clusters on Cu(111). Our results indicate a considerably higher reactivity of small copper nanoclusters, with up to seven atoms in size on roughened copper surfaces than on pristine Cu(111) and Cu(211). Regarding the restructuring events that give rise to nanoclusters under CO atmospheres, we determine that the ejection of Cu atoms from step edges and their migration therefrom to adjacent Cu(111) terraces are, by and large, driven by CO coverage effects. By means of KMC simulations, which account for CO–CO lateral interactions and CO–induced surface restructuring, we show that temperature programmed desorption (TPD) holds promise for the detection of highly reactive nanoclusters. Furthermore, our approach showcases how surface restructuring and surface–adsorbate bond breaking can be combined when modeling surface reactions and contributes to the development of an advanced understanding of the nature of active site under reaction conditions.

catalyst dynamic restructuring↗
DOE OSTI2020

Modeling evacuation demand during no-notice emergency events: Tour formation behavior

Disastrous events have been drastically increasing – both in frequency and destructive capacity – over the past few years. While advance-notice events have received a great deal of attention in the literature of disaster management, not much attention so far has been given to the no-notice events mainly because of the scarcity of data. As an attempt to address this critical gap, the current study proposes a disaggregate evacuation demand framework to understand evacuees’ travel behavior in case of no-notice emergency events. Here, the proposed framework comprises four main steps of evacuation decision, evacuation planning, tour formation, and activity schedule update. This article is dedicated to the introduction of the framework structure and elaboration on the tour formation step. In this step, we first estimate the total number of intermediate stops, travel time, and distance of the evacuation tours for those who decide to evacuate through a joint modeling structure and then, determine the type of each intermediate stop (if any). It is found that a broad range of factors including evacuees’ demographic profiles, built-environment attributes, and characteristics of the disastrous event plays a significant role in people’s evacuation behavior during no-notice emergency events. The findings of this study can assist responsible agencies in understanding evacuees’ complex behavior, and consequently, in devising effective strategies to alleviate economic damages and casualties resulted by such events.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Geometry and size dependent microstructure and crack formation in Rene 41 superalloy fabricated by laser powder bed fusion

This study provides a systematic investigation into the size and geometry-dependent microstructural evolution and cracking susceptibility of LPBF-fabricated Rene 41. By coupling experimental microstructural analysis with thermal modeling, this research uniquely identifies the relationship between geometry-specific thermal histories, carbide coarsening, and liquation cracking. Four different geometries with varying thickness were fabricated with the identical process parameters. It was found that the grain size and morphology are not affected by the part size. However, the thinner parts exhibited coarser sub-grain structures compared to the thicker ones. The crack formation was observed for the parts with cross-sections smaller than 1 mm, whereas thicker parts had high density without any defects. Further, the cracks were observed in the interdendritic regions, suggesting that liquation cracking was the active micro-crack formation mechanism. The detailed microstructural analysis combined with a thermal finite element analysis proved that the heat extraction efficiency was lower for thinner parts causing a lower cooling rate and coarser carbides, making them more susceptible to constitutional liquation. Microhardness measurements were conducted for each geometry and correlated with the observed microstructural variations. The findings highlight the critical need for geometry-specific optimization of LPBF process parameters to mitigate cracking and achieve microstructural uniformity, offering valuable insights into the fabrication of complex, high-performance aerospace components.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Formation of Al 3 Sc in Al 0.8 Sc 0.2 thin films

We report the formation of Al 3 Sc, in 100 nm Al 0.8 Sc 0.2 films, is found to be driven by exposure to high temperature through higher deposition temperature or annealing. High film resistivity was observed in films with lower deposition temperature that exhibited a lack of crystallinity, which is anticipated to cause more electron scattering. An increase in deposition temperature allows for the nucleation and growth of crystalline Al 3 Sc regions that were verified by electron diffraction. The increase in crystallinity reduces electron scattering, which results in lower film resistivity. Annealing Al 0.8 Sc 0.2 films at 600 °C in an Ar vacuum environment also allows for the formation and recrystallization of Al 3 Sc and Al and yields saturated resistivity values between 9.58 and 10.5 μΩ-cm regardless of sputter conditions. Al 3 Sc was found to nucleate and grow in a random orientation when deposited on SiO 2 , and highly {111} textured when deposited on 100 nm Ti and AlN films that were used as template layers. The rocking curve of the Al 3 Sc 111 reflection for the as-deposited films on Ti and AlN at 450 °C was 1.79° and 1.68°, respectively. Annealing the film deposited on the AlN template reduced the rocking curve substantially to 1.01° due to recrystallization of Al 3 Sc and Al within the film.

36 MATERIALS SCIENCE↗
DOE OSTI2021

MicroRNA-92a -mediated endothelial to mesenchymal transition controls vein graft neointimal lesion formation

Highlights: • TGF-β triggers microRNA-92a mediated EndMT by targeting ITGA5 is key role in vein graft vascular remodeling. • Silencing of microRNA-92a-mediated endothelial to mesenchymal transition inhibits vein graft neointimal hyperplasia. • Local adeno-associated virus delivery gene therapy deregulation of microRNA-92a-mediated EndMT may represent promising therapeutic approach for vein grafts failure. Long-term failure of vein grafts due to neointimal hyperplasia remains an important problem in coronary artery bypass graft surgery. Endothelial to mesenchymal transition (EndMT) contributes to vein graft vascular remodeling. However, there is little study on microRNA-mediated EndMT contributions to neointimal formation in vein graft. We hypothesized that microRNA-92a (miR-92a) might play an important role in determining EndMT contributions to neointimal formation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Synaptonemal complex formation produces a particular arrangement of the lateral element-associated DNA

Highlights: • The NAMA-Ur method can be used to analyze the DNA associated to the synaptonemal complex. • The DNA associated to the synaptonemal complex display bubble-like organization. • Formation of the synaptonemal complex is enough to produce the bubble-like organization of the DNA. • Synaptonemal complex without lateral elements produce similar organization of its associated DNA. During meiosis, homologous chromosomes exchange genetic material. This exchange or meiotic recombination is mediated by a proteinaceous scaffold known as the Synaptonemal complex (SC). Any defects in its formation produce failures in meiotic recombination, chromosome segregation and meiosis completion. It has been proposed that DNA repair events that will be resolved by crossover between homologous chromosomes are predetermined by the SC. Hence, structural analysis of the organization of the DNA in the SC could shed light on the process of crossover interference. In this work, we employed an ultrastructural DNA staining technique on mouse testis and followed nuclei of pachytene cells. We observed structures organized similarly to the SCs stained with conventional techniques. These structures, presumably the DNA in the SCs, are delineating the edges of both lateral elements and no staining was observed between them. DNA in the LEs resembles two parallel tracks. However, a bubble-like staining pattern in certain regions of the SC was observed. Furthermore, this staining pattern is found in SCs formed between non-homologous chromosomes, in SCs formed between sister chromatids and in SCs without lateral elements, suggesting that this particular organization of the DNA is determined by the synapsis of the chromosomes despite their lack of homology or the presence of partially formed SCs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

MiR-375 silencing attenuates pro-inflammatory macrophage response and foam cell formation by targeting KLF4

Macrophage mediated inflammation and foam cell formation play crucial roles in the development of atherosclerosis. MiR-375 is a small noncoding RNA that significantly implicated in multiple tumor regulation and has been emerged as a novel biomarker for type 2 diabetes. However, the exact role of miR-375 on macrophage activation remains unknown. In the present study, we observed that miR-375 expression showed an up-regulated expression in atherosclerotic aortas, as well as in bone marrow derived macrophages (BMDMs) and mouse peritoneal macrophages (MPMs) isolated from ApoE deficiency mice and was gradually increased followed the Ox-LDL treated time. Functionally, miR-375 inhibition significantly decreased foam cell formation accompanied by up-regulated genes expression involved in cholesterol efflux but reduced genes expression implicated in cholesterol influx. Moreover, miR-375 silencing increased resolving M2 macrophage but reduced pro-inflammatory M1 macrophage markers expression. Such above effects can be reversed by miR-375 overexpression. Mechanistically, we noticed that miR-375 knockdown promoted KLF4 expression which was required for the ameliorated effect of miR-375 silencing on macrophage activation. Importantly, the consistent results in mRNA expression of M1 and M2 markers were observed in vivo, and miR-375{sup −/−}ApoE{sup −/−} mice significant decreased atherosclerotic lesions in the whole aorta and aortic sinus. Taken together, these evidences suggested that miR-375 knockdown attenuated macrophage activation partially through activation of KLF4-dependent mechanism.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

HNRNPUL1 inhibits cisplatin sensitivity of esophageal squamous cell carcinoma through regulating the formation of circMAN1A2

Highlights: • HNRNPUL1 is an independent prognostic factor of ESCC patients receiving platinum-based chemotherapy. • Knockdown of HNRNPUL1 enhances cisplatin sensitivity of ESCC cells. • HNRNPUL1 inhibits the cisplatin sensitivity of ESCC cells by regulating the formation of circMAN1A2. Cisplatin (CDDP) is widely used for chemotherapy of esophageal squamous cell carcinoma (ESCC) but the drug resistance limits its therapeutic benefit. Heterogeneous nuclear ribonucleoprotein U-like 1 (HNRNPUL1) belongs to the family of RNA-binding proteins (RBPs) and is involved in DNA damage repair. To investigate whether and how HNRNPUL1 affects CDDP resistance of ESCC, we evaluated the expression of HNRNPUL1 and found that it was associated with recurrence in ESCC patients receiving postoperative platinum-based chemotherapy and was an independent prognostic factor for disease-free survival (DFS). Besides, we showed that the reduced expression of HNRNPUL1 enhanced the CDDP sensitivity of ESCC cells. Furthermore, RNA immunoprecipitation coupled with high-throughput sequencing (RIP-seq) were performed and a range of HNRNPUL1-binding RNAs influenced by CDDP treatment were identified followed by bioinformatics analysis. In terms of mechanism, we found that HNRNPUL1 inhibited CDDP sensitivity of ESCC cells by regulating the CDDP sensitivity-inhibited circular RNA (circRNA) MAN1A2 formation. Taken together, our results first demonstrated the role of HNRNPUL1 in CDDP resistance of ESCC and suggested that HNRNPUL1 may be a potential target of ESCC chemotherapy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Formation of transient high-β plasmas in a magnetized, weakly collisional regime

We present experimental data providing evidence for the formation of transient (~20 μs) plasmas that are simultaneously weakly magnetized (i.e. Hall magnetization parameter ωτ > 1) and dominated by thermal pressure (i.e. ratio of thermal-to-magnetic pressure β > 1). Particle collisional mean free paths are an appreciable fraction of the overall system size. These plasmas are formed via the head-on merging of two plasmas launched by magnetized coaxial guns. The ratio λ gun = μ 0 I gun /ψ gun of gun current I gun to applied magnetic flux ψ gun is an experimental knob for exploring the parameter space of β and ωτ. These experiments were conducted on the Big Red Ball at the Wisconsin Plasma Physics Laboratory. The transient formation of such plasmas can potentially open up new regimes for the laboratory study of weakly collisional, magnetized, high-β plasma physics; processes relevant to astrophysical objects and phenomena; and novel magnetized plasma targets for magneto-inertial fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Molecular Specificity and Proton Transfer Mechanisms in Aerosol Prenucleation Clusters Relevant to New Particle Formation

Atmospheric aerosol particles influence Earth’s radiative energy balance and cloud properties either directly through interacting with the solar radiation or indirectly through acting as cloud condensation nuclei (CCN), thus impacting Earth’s climate change, air quality, and human health. Regarding both the important scientific and overarching practical implications of aerosols, the past two decades have seen an extensive research effort, with emphasis on the chemical compositions and underlying mechanisms of aerosol formation. New particle formation (NPF) has been recognized as an important pathway, contributing up to 50% of atmospheric aerosols. Nowadays, the general consensus in NPF is that it proceeds via two distinct stages—the nucleation from gaseous precursors to form critical nuclei of sub-1–2 nanometer size, and the subsequent growth into large particles. However, a fundamental understanding of both the NPF process and the molecular-level characterization of the critical size aerosol clusters is still largely missing, hampering the development of reliable and predictive aerosol nucleation and climate models.

Hou, Gao-Lei↗
DOE OSTI2023

Exploring the Role of Neutral 4-Amino-1,2,4-triazole in the Formation of Hexanuclear f-Element Hydrolysis Products

Our recent observations of an unexpected Ce(III) hydrolysis product from the reaction of 4-amino-1,2,4-triazole (4-NH 2 -1,2,4-Triaz) with CeCl 3 ·7H 2 O, [Ce 6 (μ 3 -O) 4 (μ 3 -OH) 2 (μ 3 -Cl) 2 (Cl) 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ]·7H 2 O, the first high-nuclearity lanthanide complex where all Ln atoms are connected pairwise through 12 N-donor ligands or 12 neutral bridging ligands of any type, prompted us to explore the utility of this ligand in trapping additional f-element examples. Reactions of LnCl 3 ·6H 2 O (Ln = Nd, Eu, Ho) with a large excess of 4-NH 2 -1,2,4-Triaz (20 equiv) and with the addition of small amounts of water to help solubilize the metal salts led to the isolation of the unique hydrolysis products [Nd 6 (μ 3 -OH) 8 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ][Cl 4 ]·2H 2 O, [Eu 6 (μ 6 -Cl) 0.23 (μ 3 -O 0.77 ) 4 (μ 3 -O) 2.6 (μ 3 -Cl) 0.4 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ], and [Ho 6 (μ 6 -Cl) 0.21 (μ 3 -O 0.79 ) 4 (μ 3 -OH) 2 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ][Cl] 3.4 . Here, we also report a Ce(III) analogue prepared in glassware contaminated with Pb(OAc) 2 , namely, [Ce 6 (μ 3 -OH) 8 (BrPbBr 5 )(μ 2 -4-NH 2 -1,2,4-Triaz) 11.5 (OH 2 ) 6 ][Pb 0.84 Br 4.2 ][Br] 3.8 ·2(4-NH 2 -1,2,4-Triaz)·3.6H 2 O. The Nd(III) complex is the structurally most ordered with a clear [Nd 6 (μ 3 -OH) 8 ] cluster core, while the Eu(III) and Ho(III) compounds contain partial occupancy of a μ 6 position and thus result in an incomplete Ln 6 O 9 cluster core formation. The crystallographic results suggest that the 4-NH 2 -1,2,4-Triaz ligand brings Ln(III) ions together, followed by the formation of an Ln 6 O 8 or Ln 6 O 9 core with whatever remaining anions or ligands can be incorporated. Given the complexity of the hydrolysis products of nuclear waste, we expect to continue to find a myriad of closely related complex structures of these types for the f-elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Crystallographic Evidence for Formation of M 6 O 8 /M 6 O 9 f-Element Clusters in Hydrolysis Reactions

In this contribution, we have conducted an examination of crystallographic data which includes 184 4f- and 5f-structures containing the M 6 O 8 or M 6 O 9 moiety. Since much of the work in this field has actually been done to explore the formation and properties of metal organic frameworks (MOFs), we hope that this collection can be used by actinide scientists to further investigate structural and mechanistic trends and gain insight into the formation of these compounds. Here we discuss the general trends in coordination, ligands used, and bonding within the M 6 O 8 or M 6 O 9 core in the hope that further computational work can benefit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗