SEARCH · Engineering Papers

Results for “flow instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Optically thick ablation fronts

The physical characteristics of optically thick ablation fronts such as interstellar clouds are analyzed. Attention is given to cold clumps in both planar and spherical geometries and modifications caused by accelerations in a gravitational field or by evaporation of the clumps when encountered hot gas. The effects of ablation on the appearance of the Rayleigh-Taylor instability are examined in both linear and nonlinear regimes. The results of the calculations are applied to the astrophysical phenomena of cold clumps immersed in a supersonic flow, optically thick jets, and ablation in stellar envelopes. Evaporation in an optically thick front is projected to be orders of magnitude larger than evaporation in electron-conduction fronts in optically thin conditions. The optically thick processes could then be useful for modeling flows from, e.g., newly formed stars and active galactic nuclei.

Konigl, A.↗

NASA NTRS1986

Numerical simulation of a controlled boundary layer

The problem of interest is the boundary layer over a flat plate. The three standard laminar flow control (LFC) techniques are pressure gradient, suction, and heating. The parameters used to describe the amount of control in the context of the boundary layer equations are introduced. The numerical method required to find the mean flow, the linear eigenvalues of the Orr-Sommerfeld equation, and the full, nonlinear, 3-D solution of the Navier-Stokes equations are outlined. A secondary instability exists for the parallel boundary subject to uniform pressure gradient, suction, or heating. Selective control of the spanwise mode reduces the secondary instability in the parallel boundary layer at low Reynolds number.

Zang, Thomas A.↗

NASA NTRS1989

The effects of stabilizing and destabilizing longitudinal curvature on the structure of turbulent, two-stream mixing layers

The construction and development of the multi-component traversing system and associated control hardware and software are presented. A hydrogen bubble/laser sheet flow visualization technique was developed to visually study the characteristics of the mixing layers. With this technique large-scale rollers arising from the Taylor-Gortler instability and its interaction with the primary Kelvin-Helmholtz structures can be studied.

Plesniak, Michael W.↗

NASA NTRS1988

Numerical simulation of transition in a decelerating boundary layer

Transition in a decelerating flat-plate boundary layer is numerically simulated up to the beginning of three-dimensional breakdown, and the results are compared with an experiment. The adverse pressure gradient induced by deceleration increases the growth rate of disturbances and allows transition at lower Reynolds numbers. The primary instability is characterized by a wave packet, which undergoes three-dimensional distortion. Lambda vortices are locally observed, but they are not aligned with respect to the flow direction.

Yang, Kyung Soo↗

NASA NTRS1991

Real gas effects on hypersonic boundary-layer stability

High-temperature effects alter the physical and transport properties of a gas, air in particular, due to vibrational excitation and gas dissociation, and thus the chemical reactions have to be considered in order to compute the flow field. Linear stability of high-temperature boundary layers is investigated under the assumption of chemical equilibrium and this gas model is labeled here as real gas model. In this model, the system of stability equations remains of the same order as for the perfect gas and the effect of chemical reactions is introduced only through mean flow and gas property variations. Calculations are performed for Mach 10 and 15 boundary layers and the results indicate that real gas effects cause the first mode instability to stabilize while the second mode is made more unstable. It is also found that the second mode instability shifts to lower frequencies. There is a slight destabilizing influence of real gas on the Goertler instability as compared to the perfect gas results.

Malik, M. R.↗

NASA NTRS1992

Numerical studies of natural transition in a decelerating boundary layer

The laminar-turbulent transition in a decelerating flat-plate boundary layer is investigated by solving numerically the incompressible time-dependent three-dimensional Navier-Stokes equations. In the early stages of the transition, two-dimensional and slightly oblique waves are found to grow because of an inflexional instability. Their subsequent nonlinear interactions trigger the breakdown and determine the pattern of the Lambda vortices. The tips of the Lambda vortices are rarely aligned in the flow direction and appear in local patches, often near the dislocation in the initial wave pattern. The observed features are accounted for by a simple wave-interference model.

Yang, Kyung-Soo↗

NASA NTRS1994

The Aeroacoustics of Supersonic Coaxial Jets

Instability waves have been established as the dominant source of mixing noise radiating into the downstream arc of a supersonic jet when the waves have phase velocities that are supersonic relative to ambient conditions. Recent theories for supersonic jet noise have used the concepts of growing and decaying linear instability waves for predicting radiated noise. This analysis is extended to the prediction of noise radiation from supersonic coaxial jets. Since the analysis requires a known mean flow and the coaxial jet mean flow is not described easily in terms of analytic functions, a numerical prediction is made for its development. The Reynolds averaged, compressible, boundary layer equations are solved using a mixing length turbulence model. Empirical correlations are developed for the effects of velocity and temperature ratios and Mach number. Both normal and inverted velocity profile coaxial jets are considered. Comparisons with measurements for both single and coaxial jets show good agreement. The results from mean flow and stability calculations are used to predict the noise radiation from coaxial jets with different operating conditions. Comparisons are made between different coaxial jets and a single equivalent jet with the same total thrust, mass flow, and exit area. Results indicate that normal velocity profile jets can have noise reductions compared to the single equivalent jet. No noise reductions are found for inverted velocity profile jets operated at the minimum noise condition compared to the single equivalent jet. However, it is inferred that changes in area ratio may provide noise reduction benefits for inverted velocity profile jets.

Dahl, Milo D.↗

NASA NTRS1994

The morningside low-latitude boundary layer as determined from electric and magnetic field measurements on Geotail

On October 17, 1992, the Geotail satellite crossed the dawnside magnetopause approximately 41 times. At the majority of these crossings, the magnetic field and the normal component of the electric field were larger and the plasma density was smaller in a low-latitude boundary layer than they were in either the nearby magnetosheath or in the magnetosphere. These results are intepreted in terms of the Kelvin-Helmholtz instability associated with velocity shear at the magnetopause. Consistent with this interpretation, it is shown that the low-latitude boundary layer was the region where the flow decreased from its magnetosheath to magnetospheric value. Evidence is presented that the magnetopause was locally oriented within less than 20 deg of its nominal geometry on these crossings and that it moved with an amplitude of 1500-6000 kilometers. The thickness of the low-latitude boundary layer averaged 800 kilometers and the electric potential across it averaged 4 kilovolts with a spread of a factor of 2. Thus, the viscous interaction and similar processes are not significant contributors to magnetospheric convection.

Mozer, F. S.↗

NASA NTRS1997

Premixed Gas Combustion: An Excitable System

Rotating spiral and target patterns have been observed experimentally on freely-propagating premixed gas flames in large diameter tubes at normal gravity (1-g). These modes of propagation occur in near-limit mixtures which have a Lewis number (Le, defined as the ratio of the thermal diffusivity of the cold mixture to the mass diffusivity of the scarce component into the mixture) sufficiently greater than one. However, at 1-g, buoyant flows strongly distort the flame curvature, hydrodynamics (thus stretch) and convective transport of species and heat. In turn, these alter the critical Le required for onset of instability. To isolate and better understand the mechanisms which drive the observed patterns and their dynamics, 1-g and microgravity (micro-g) experiments are being conducted to determine: (1) the structure and dynamics of the patterns, (2) a map of the critical Le and heat loss for their occurrence, (3) the relative significance of the chemical kinetics, and (4) the effect of curvature (local wave and global flame front) on wave propagation. With this in hand, we will be better prepared to discuss an additional mode, a state of 'chemical turbulence,' which seems to be the ultimate fate of many of these near-limit flames prior to extinction.

Pearlman, Howard↗

NASA NTRS1993

Satellite Radar Interferometry for Monitoring Ice-Sheet Motion: Application to an Antarctic Ice Stream

As a new means of monitoring the flow velocities and grounding-line positions of ice streams, which are indicators of response of the Antarctic and Greenland ice sheets to climatic change or internal instability, the method of satellite radar interferometry (SRI) is here proposed and applied to the Rutford Ice Stream, Antarctica. The method uses phase comparison of the radar signal obtained for a pair of SAR images taken a few days apart to plot an interferogram which directly displays relative ground motions that have occurred in the time interval between images. The detection limit is about 1.5 mm for vertical motions and about 4 mm for horizontal motions in the radar beam direction. In the Rutford Ice Stream, SRI velocities agree fairly well with earlier ground-truth data over a longitudinal interval of 29 km; the comparison suggests a secular decrease in velocity of about 2 percent from 1978-80 to 1992...

Goldstein, R. M.↗

NASA NTRS1993

Satellite Radar Interferometry for Monitoring Ice-Sheet Motion: Application to an Antarctic Ice Stream

Goldstein, R. M.↗

NASA NTRS2014

Ultrahigh Temperature Capacitive Pressure Sensor

Robust, miniaturized sensing systems are needed to improve performance, increase efficiency, and track system health status and failure modes of advanced propulsion systems. Because microsensors must operate in extremely harsh environments, there are many technical challenges involved in developing reliable systems. In addition to high temperatures and pressures, sensing systems are exposed to oxidation, corrosion, thermal shock, fatigue, fouling, and abrasive wear. In these harsh conditions, sensors must be able to withstand high flow rates, vibration, jet fuel, and exhaust. In order for existing and future aeropropulsion turbine engines to improve safety and reduce cost and emissions while controlling engine instabilities, more accurate and complete sensor information is necessary. High-temperature (300 to 1,350 C) capacitive pressure sensors are of particular interest due to their high measurement bandwidth and inherent suitability for wireless readout schemes. The objective of this project is to develop a capacitive pressure sensor based on silicon carbon nitride (SiCN), a new class of high-temperature ceramic materials, which possesses excellent mechanical and electric properties at temperatures up to 1,600 C.

Harsh, Kevin↗

NASA NTRS2020

Transition induced by Streamwise Arrays of Roughness Elements on a Flat Plate in Mach 3.5 Flow

The flow behind streamwise arrays of roughness elements was examined with a hot-wire probe. The roughness elements had heights of approximately 20% and 40% of the boundary layer thickness and different spacings and orientations of these roughness elements were tested. The circular roughness elements were spaced two diameters apart or four diameters apart from center to center. Transition moved upstream only when the roughness elements were spaced four diameters apart. The rectangular roughness elements were oriented so that they were at a 45-degree angle relative to the leading edge of the plate. Tandem rectangular elements either had the same orientation or opposing orientation. Mean mass-flux and total-temperature profiles of the flow field downstream of the roughness elements were examined for mean-flow distortion. Mass-flux fluctuation profiles showed that a 45-kHz odd-mode disturbance was present downstream of the shorter circular roughness elements. The dominant instability downstream of the taller circular roughness elements was a 65–85 kHz even-mode disturbance. Mass-flux fluctuation profiles showed that the dominant mode downstream of the tandem rectangular roughness elements with the same orientation was similar to that of a single roughness element and centered at a frequency of approximately 55 kHz. The 55-kHz instability appeared to correspond to increased spanwise shear, and thus was determined to be an odd-like mode. The dominant instability downstream of the tandem roughness elements with opposing orientation was centered at a frequency of 65 kHz and did not transition in the measurement region.

Amanda Chou↗

NASA NTRSDate not supplied

Eigenvalue Sensitivity Computations for Linear Stability Theory

To realize the drag reduction benefit of boundary-layer transition control strategies, it is crucial to integrate transition prediction into the vehicle design through an optimization process. The integration of transition prediction based on linear stability analysis into adjoint d design optimization requires coupling an adjoint enabled computational fluid dynamics (CFD) solver with an adjoint enabled linear stability code. In particular, the boundary-layer transition location is often predicted using the N-factor method based on linear stability theory (LST). Thus, sensitivity of the linear-stability eigenvalues constitute an essential building block for optimizing the laminar flow performance. The present paper describes an implementation of LST eigenvalue sensitivity analysis that can be easily coupled with a CFD solver. Specifically, we describe a discrete adjoint formulation for the transition location prediction based on the N-factor method. The verification of this formulation is carried out by comparing the adjoint-based sensitivity of the local growth rate of a given instability mode with respect to the disturbance frequency, and the adjoint-based sensitivity of the transition location with respect to spanwise wavenumber with those sensitivities computed using a finite-difference approximation. Finally, the adjoint LST formulation is applied to flat-plate boundary-layer flows at transonic, supersonic, and hypersonic conditions, to determine the behavior and sensitivities of the transition location with respect to a range of disturbance spanwise wavenumbers.

Boundary Layer Transition↗

NASA NTRS2001

MHD Instability and Turbulence in the Tachocline

In this quarter we have begun simulations on the Cray T3E at PSC and we are debugging our code on the TSC. The PSC simulations are examining stratified shear turbulence with a flow-aligned magnetic field and passive tracer particles. We have conducted analysis of neutral simulations to establish a firm basis of comparison. Second-order structure functions have been computed, fit, and compared to theoretical expressions relating the dissipation fields and the structure-function-fit parameters. Agreement with high-Reynolds number observations is excellent, giving us confidence that the lower-Re simulations are relevant to higher-Re flows. We have also evaluated the neutral layer anisotropy.

Werne, Joseph↗

NASA NTRS1996

Simulation of Three-Dimensional Symmetric and Asymmetric Instabilities in Attachment-Line Boundary Layers

On a swept wing, contamination along the leading edge, Tollmien-Schlichting waves, stationary or traveling crossflow vortices, and/or Taylor-Gortler vortices can cause the catastrophic breakdown of laminar to turbulent flow, which leads to increased skin-friction drag for the aircraft. The discussion in this Note will be limited to disturbances which evolve along the attachment line (leading edge of swept wing). If the Reynolds number of the attachment-line boundary layer is greater than some critical value, then the complete wing is inevitably engulfed in turbulent flow. Essentially, there are two critical Reynolds number points that must be considered. The first is for small-amplitude disturbances, and the second is for bypass transition. The present study will use direct numerical simulations to validate a linear 2D-eigenvalue prediction method based on parabolized stability equations by Lin and Malik. This method is considered because it suggests that a number of symmetric and asymmetric modes exist and are stable or unstable on the attachment line depending on the Reynolds number. If validated, the approach would predict a number of modes which are linearly damped in the Reynolds number regime 100 to 245; however, these modes may grow nonlinearly and provide an explanation to this region.

Joslin, Ronald D.↗

NASA NTRS1989

Numerical simulation of pressure oscillations in a ramjet combustor

Large-eddy simulations of compressible cold flow in a ramjet combustor configuration were performed. The objectives were to investigate the mechanisms for vortex-acoustic interaction in such a device and to develop a simulation method that can be extended to cases with combustion heat release to study combustion instability. From the simulation, it was found that the separated shear layer rolls up into concentrated vortices that merge to form large coherent structures. These vortices interact with the choked nozzle downstream to produce an axial acoustic dipole. The spectrum of the pressure fluctuation at the base of the backward-facing step shows that there are two types of oscillations: an acoustic resonant mode and a vortex-acoustic coupled mode. Based on the flow physics observed in the simulations, a simple one-dimensional model for the vortex-acoustic coupled mode was proposed. The eigenvalue problem based on this model was solved to obtain the frequency of the coupled mode.

Jou, Wen-Huei↗

NASA NTRS1998

Effects of Buoyancy on Lean Premixed V-Flames Part I: Laminar and Turblent Flame Structure

Laser schlieren and planar laser-induced fluorescence techniques have been used to investigate laminar and turbulent v-flames in +g, -g, and micro g under flow conditions that span the regimes of momentum domination (Ri < 0. 1) and buoyancy domination (Ri > 0.1). Overall flame features shown by schlieren indicate that buoyancy dominates the entire flow field for conditions close to Ri = 1. With decreasing Ri, buoyancy effects are observed only in the far-field regions. Analyses of the mean flame angles demonstrate that laminar and turbulent flames do not have similar responses to buoyancy. Difference in the laminar +g and -g flame angles decrease with Ri (i.e., increasing Re) and converge to the microgravity flame angle at the momentum limit (Ri - 0). This is consistent with the notion that the effects of buoyancy diminish with increasing flow momentum. The +g and -g turbulent flame angles, however, do not converge at Ri = 0. As shown by OH-PLIF images, the inconsistency in +g and -g turbulent flame angles is associated with the differences in flame wrinkles. Turbulent flame wrinkles evolve more slowly in +g than in -g. The difference in flame wrinkle structures, however, cannot be explained in terms of buoyancy effects on flame instability mechanisms. It seems to be associated with the field effects of buoyancy that stretches the turbulent flame brushes in +g and compresses the flame brush in -g. Flame wrinkling offers a mechanism through which the flame responds to the field effects of buoyancy despite increasing flow momentum. These observations point to the need to include both upstream and downstream contributions in theoretical analysis of flame turbulence interactions.

Cheng, Robert K.↗