Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feedbacks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Pilot-optimal multivariable control synthesis by output feedback

A control system design approach for optimal stability augmentation, systems, using limited state feedback theory with the specific inclusion of the human pilot in the loop is presented. The methodology is especially suitable for application to flight vehicles exhibiting nonconventional dynamic characteristics and for which quantitative handling qualities specifications are not available. The design is based on a correlation between pilot ratings and objective function of the optimal control model of the human pilot. Simultaneous optimization for augmentation and pilot gains are required.

Schmidt, D. K.↗

Liquid-phase epitaxy grown PbSnTe distributed feedback laser diodes with broad continuous single-mode tuning range

Distributed feedback (DFB) pulsed laser operation has been demonstrated in stripe geometry Pb(1-x)Sn(x)Te double-heterostructures grown by liquid-phase epitaxy. The grating structure of 0.79 micron periodicity operates in first order near 12.8 microns and was fabricated prior to the liquid-phase epitaxial growth using holographic exposure techniques. These DFB lasers had moderate thresholds, 3.6 kA/sq cm, and the output power versus current curves exhibited a sharp turn-on free of kinks. Clean, single-mode emission spectra, continuously tunable over a range in excess of 20 per cm, centered about 780 per cm (12.8 microns), and at an average rate of 1.2 per cm-K from 9 to 26 K, were observed. While weaker modes could at times be seen in the spectrum, substantially single-mode operation was obtained over the entire operating range and to over 10 times threshold.

Hsieh, H.-H.↗

Nonlinear state estimation and feedback control of nonlinear and bilinear distributed parameter systems

This paper presents a theory of nonlinear state observers for nonlinear and bilinear distributed parameter systems. Convergence results are proved for these observers. Linear feedback control derived from such state observers is applied to the distributed parameter system and conditions are presented for closed-loop stability. The emphasis is on finite dimensional state observers and controllers (which can be implemented with on-line computers) and conditions for their successful operation with infinite dimensional distributed parameter systems.

Balas, M. J.↗

Finite element models and feedback control of flexible aerospace structures

Large flexible aerospace structures, such as the solar power satellite, are distributed parameter systems with very complex continuum descriptions. This paper investigates the use of finite element methods to produce reduced-order models and finite dimensional feedback controllers for these structures. The main results give conditions under which stable control of the finite element model will produce stable control of the actual structure.

Balas, M. J.↗

Analysis of Feedback Control Systems

BLOCK IT implements algorithm that obtains reduced-order feedback control equations for use in both time and frequency domain analysis. BLOCK IT computes real nonsingular similarity-transformation matrix-reduces real nonsymmetric matrix to block-diagonal form; each block is real quasi-upper triangular matrix. Algorithm works with defective and derogatory matrices. If program fails, algorithm generates data output used as guide for reformulation of mathematical equations that lead to ill-conditioned matrix not block-diagonalized.

Frisch, H. P.↗

A negative feedback mechanism for the long-term stabilization of the earth's surface temperature

It is suggested that the partial pressure of carbon dioxide in the atmosphere is buffered, over geological time scales, by a negative feedback mechanism, in which the rate of weathering of silicate minerals (followed by deposition of carbonate minerals) depends on surface temperature, which in turn depends on the carbon dioxide partial pressure through the greenhouse effect. Although the quantitative details of this mechanism are speculative, it appears able to partially stabilize the earth's surface temperature against the steady increase of solar luminosity, believed to have occurred since the origin of the solar system.

Walker, J. C. G.↗

Low-latitude cloudiness and climate feedback - Comparative estimates from satellite data

Three studies of the relative albedo to the IR components of cloud amount feedback are reviewed, and an approach to the seasonal variability in low-level cloud numbers is presented. Comparisons are made and uncertainties calculated for the predictions of cloud amounts from satellite data sets for outgoing IR flux. IR data is used directly for a linear regression analysis and seasonal and latitudinal variations are considered in terms of monthly-annual means for particular latitude zones. Investigations of NOAA-NESS satellite data revealed that cirrus clouds are transparent in the 10.5-12.5 microns range and cloud albedos decrease at wavelengths greater than 0.7 micron, which suggests a possibility of cloud-sky and clear-sky albedo comparisons at 0.5-0.7 micron. The inclusion of Rayleigh scattering and atmospheric water vapor absorption of sunlight is recommended to test the effects on observed contracts.

Cess, R. D.↗

Feedback Control of Rotor Overspeed

Feedback system for automatically governing helicopter rotor speed promises to lessen pilot's workload, enhance maneuverability, and protect airframe. With suitable modifications, concept applied to control speed of electrical generators, automotive engines and other machinery.

Churchill, G. B.↗

Design of multivariable feedback control systems via spectral assignment

The applicability of spectral assignment techniques to the design of multivariable feedback control systems was investigated. A fractional representation design procedure for unstable plants is presented and illustrated with an example. A computer aided design software package implementing eigenvalue/eigenvector design procedures is described. A design example which illustrates the use of the program is explained.

Mielke, R. R.↗

Optimal feedback strategies for pursuit-evasion and interception in a plane

Variable-speed pursuit-evasion and interception for two aircraft moving in a horizontal plane are analyzed in terms of a coordinate frame fixed in the plane at termination. Each participant's optimal motion can be represented by extremal trajectory maps. These maps are used to discuss sub-optimal approximations that are independent of the other participant. A method of constructing sections of the barrier, dispersal, and control-level surfaces and thus determining feedback strategies is described. Some examples are shown for pursuit-evasion and the minimum-time interception of a straight-flying target.

Rajan, N.↗

Stable feedback control of distributed parameter systems: Time and frequency domain conditions

Large space structures, or any mechanically flexible structures, are inherently distributed parameter systems (DPS) whose dynamics are modeled by partial, rather than ordinary, differential equations. Such DPS are described by operator equations on an infinite-dimensional Hilbert (or Banach) space. However, any feedback controller for such a DPS must be a finite-dimensional (and discrete-time) system in order to be implemented with on-line digital computers and a finite (small) number of actuators and sensors. There are many ways to synthesize such controllers; the Galerkin or finite-element approach is emphasized.

Balas, M. J.↗

Climate studies with a multi-layer energy balance model. I - Model description and sensitivity to the solar constant. II - The role of feedback mechanisms in the CO2 problem

A nine-layer zonally averaged, steady-state model, based upon thermal energy balance, is developed for use in climate sensitivity studies and includes an accurate treatment of radiative transfer, parameterized meridional and vertical energy transport, and thermodynamic interaction between the surface and the atmosphere. A high degree of nonlinearity is exhibited by the model in a study of sensitivity to changes in the solar constant. The change in the hemispheric mean surface temperature is +3.1 C in response to a 2% increase in the solar constant and -4.3 C in response to a 2% decrease in the solar constant. The sensitivity varies with latitude, and the response of atmospheric temperature varies with height. In addition, the model is used to study the sensitivity of climate to a doubling of the atmospheric CO2 content. It is found that the tropospheric temperature lapse rate decreases at low latitudes but increases at high latitudes in response to a doubled CO2 content. Averaged over the Northern Hemisphere, the change is +2.3 C in the surface temperature and +0.47 C in the earth's brightness temperature. The effects of some feedback mechanisms on the climate sensitivity to a doubled CO2 content show that the sensitivity of surface temperature approximately doubles at all latitudes due to the change in water vapor content.

Peng, L.↗

Feedback stabilization and control of linear neutral systems

The first problem treated here is the realization and stabilization of linear neutral systems with discrete delays. It is shown that any autonomous linear neutral system with discrete delays is zero-state equivalent to an abstract linear system over a local ring of operators. Using the abstract model, the basic existence question for neutral realization is then settled. For general infinite dimensional linear systems, there is no precise analog of the finite dimensional state space isomorphism theorem. Because of this, the notion of spectral minimality must be introduced. For the case of single input-single output systems, realizations are obtained that are both minimal and spectrally minimal. Using the Cruz-Hale theory of stable D-operators, conditions are given that ensure that any poles introduced into the realization are strictly contained in the left half plane and indeed are characterized as characteristic values of the D-operator. The problem of the feedback stabilization of neutral systems is then considered using the abstract model. It is shown that, for neutral systems with commensurable delays and a stable D-operator in the sense of Cruz and Hale, Morses theorem (1976) on pole assignment over a PID implies stabilizability in the reachable case.

Tarn, T. J.↗

Feedback laws for fuel minimization for transport aircraft

The Theoretical Mechanics Branch has as one of its long-range goals to work toward solving real-time trajectory optimization problems on board an aircraft. This is a generic problem that has application to all aspects of aviation from general aviation through commercial to military. Overall interest is in the generic problem, but specific problems to achieve concrete results are examined. The problem is to develop control laws that generate approximately optimal trajectories with respect to some criteria such as minimum time, minimum fuel, or some combination of the two. These laws must be simple enough to be implemented on a computer that is flown on board an aircraft, which implies a major simplification from the two point boundary value problem generated by a standard trajectory optimization problem. In addition, the control laws allow for changes in end conditions during the flight, and changes in weather along a planned flight path. Therefore, a feedback control law that generates commands based on the current state rather than a precomputed open-loop control law is desired. This requirement, along with the need for order reduction, argues for the application of singular perturbation techniques.

Price, D. B.↗

Flight test results for the Digital Integrated Automatic Landing Systems (DIALS): A modern control full-state feedback design

The Digital Integrated Automatic Landing System (DIALS) is discussed. The DIALS is a modern control theory design performing all the maneuver modes associated with current autoland systems: localizer capture and track, glideslope capture and track, decrab, and flare. The DIALS is an integrated full-state feedback system which was designed using direct-digital methods. The DIALS uses standard aircraft sensors and the digital Microwave Landing System (MLS) signals as measurements. It consists of separately designed longitudinal and lateral channels although some cross-coupling variables are fed between channels for improved state estimates and trajectory commands. The DIALS was implemented within the 16-bit fixed-point flight computers of the ATOPS research aircraft, a small twin jet commercial transport outfitted with a second research cockpit and a fly-by-wire system. The DIALS became the first modern control theory design to be successfully flight tested on a commercial-type aircraft. Flight tests were conducted in late 1981 using a wide coverage MLS on Runway 22 at Wallops Flight Center. All the modes were exercised including the capture and track of steep glidescopes up to 5 degrees.

Hueschen, R. M.↗

Approximation techniques for parameter estimation and feedback control for distributed models of large flexible structures

Approximation ideas are discussed that can be used in parameter estimation and feedback control for Euler-Bernoulli models of elastic systems. Focusing on parameter estimation problems, ways by which one can obtain convergence results for cubic spline based schemes for hybrid models involving an elastic cantilevered beam with tip mass and base acceleration are outlined. Sample numerical findings are also presented.

Banks, H. T.↗

Feedback in separated flows over symmetric airfoils

For a flow over an airfoil with laminar separation, a feedback cycle may exist whereby a Kelvin-Helmholtz instability wave emanating from the separation point on the airfoil surface grows along the shear layer and is diffracted as it interacts with the sharp trailing edge of the airfoil, causing acoustic radiation which, in turn, propagates upstream and regenerates the initial instability wave. The analysis is restricted to the high frequency limit. Solutions to the boundary-value problem are obtained using the slowly varying approximation and the method of matched asymptotic expansions. Resonant solutions exist for certain discrete values of the Reynolds and Strouhal numbers. The results are discussed and compared with available data.

Atassi, H. M.↗

Visual information transfer. 1: Assessment of specific information needs. 2: The effects of degraded motion feedback. 3: Parameters of appropriate instrument scanning behavior

Pilot and flight crew assessment of visually displayed information is examined as well as the effects of degraded and uncorrected motion feedback, and instrument scanning efficiency by the pilot. Computerized flight simulation and appropriate physiological measurements are used to collect data for standardization.

Comstock, J. R., Jr.↗