Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Feasibility of determining haze properties during high-speed Titan entry

An international cooperative project between the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) is planning to send a probe into the atmosphere of Titan (a moon of Saturn) as part of the Cassini Mission to Saturn. This paper analyzes the feasibility of measuring the intensity of atomic carbon and hydrogen line emission in the shock layer during the high velocity portion of the entry to determine the number density and composition of the organic haze particles in the Titan atmosphere. Analysis indicates that the line radiation signal-to-noise ratios are high enough so that determination of the haze particle number density and composition appears to be feasible. The analysis may be applicable to other future planetary missions.

Nelson, H. F.↗
NASA NTRS1993

Simulation of ablation in Earth atmospheric entry

The process of ablation for Earth atmospheric entry is simulated using a computational approach that allows thermo-chemical nonequilibrium of the flow field and ablation gases. The heat pulse into the heat shield is modeled. The flowfield and graphite heat shield are coupled through surface mass and energy balances. The surface thermochemistry involves the oxidation of graphite and allows for catalytic recombination of diatomic oxygen. Steady-state simulations are performed on a one meter nose radius sphere at an altitude of 65/km and at freestream velocities of 8 km/s and 10 km/s. A transient simulation is performed at 65 km altitude and a freestream velocity of 10 km/s.

Keenan, James A.↗
NASA NTRS1958

Discharge Coefficients for Combustor-liner Air-entry Holes II : Flush Rectangular Holes, Step Louvers, and Scoops

Experimental discharge coefficients for various types of combustor-liner air-entry holes are presented as a function of a dimensionless flow parameter. In general, scoops and step louvers have higher discharge coefficients and wider flow ranges than flush holes. The effects of size or shape of a given type of hole are small. The proximity of multiple flush holes or the wall inclination of a convergent duct has a negligible effect on discharge coefficient.

FLOW, COMPRESSIBLE↗
NASA NTRS1958

A method for simulating the atmospheric entry of long-range ballistic missiles

It is demonstrated with the aid of similitude arguments that a model launched from a hypervelocity gun upstream through a special supersonic nozzle should experience aerodynamic heating and resulting thermal stresses like those encountered by a long-range ballistic missile entering the earth's atmosphere. This demonstration hinges on the requirements that model and missile be geometrically similar and made of the same material, and that they have the same flight speed and Reynolds number (based on conditions just outside the boundary layer) at corresponding points in their trajectories. The hypervelocity gun provides the model with the required initial speed, while the nozzle scales the atmosphere, in terms of density variation, to provide the model with speeds and Reynolds numbers over its entire trajectory. Since both the motion and aerodynamic heating of a missile tend to be simulated in the model tests, this combination of hypervelocity gun and supersonic nozzle is termed an atmosphere entry simulator.

Eggers, A J , Jr↗
NASA NTRS1994

Planetary entry experiments

The final report summarizes the results from three research areas: (1) window design for the radiometric measurement of the forebody radiative heating experienced by atmospheric entry spaceraft; (2) survey of the current understanding of chemical species on selected solar system bodies and assess the importance of measurements with regard to vehicle environment and with regard to understanding of planetary atmospheres with emphasis on Venus, Mars, and Titan; and (3) measure and analyze the radiation (VUV to near-IR) from the shock heated gas cap of a blunt body in an Ames arc Jet wind-tunnel facility.

Craig, Roger A.↗
NASA NTRS1995

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 50: From student to entry-level professional: Examining the role of language and written communications in the reacculturation of aerospace engineering students

When students graduate and enter the world of work, they must make the transition from an academic to a professional knowledge community. Kenneth Bruffee's model of the social construction of knowledge suggests that language and written communication play a critical role in the reacculturation process that enables successful movement from one knowledge community to another. We present the results of a national (mail) survey that examined the technical communications abilities, skills, and competencies of 1,673 aerospace engineering students, who represent an academic knowledge community. These results are examined within the context of the technical communications behaviors and practices reported by 2,355 aerospace engineers and scientists employed in government and industry, who represent a professional knowledge community that the students expect to join. Bruffee's claim of the importance of language and written communication in the successful transition from an academic to a professional knowledge community is supported by the responses from the two communities we surveyed. Implications are offered for facilitating the reacculturation process of students to entry-level engineering professionals.

Pinelli, Thomas E.↗
NASA NTRS1995

Causal correlation of foliar biochemical concentrations with AVIRIS spectra using forced entry linear regression

A major goal of airborne imaging spectrometry is to estimate the biochemical composition of vegetation canopies from reflectance spectra. Remotely-sensed estimates of foliar biochemical concentrations of forests would provide valuable indicators of ecosystem function at regional and eventually global scales. Empirical research has shown a relationship exists between the amount of radiation reflected from absorption features and the concentration of given biochemicals in leaves and canopies (Matson et al., 1994, Johnson et al., 1994). A technique commonly used to determine which wavelengths have the strongest correlation with the biochemical of interest is unguided (stepwise) multiple regression. Wavelengths are entered into a multivariate regression equation, in their order of importance, each contributing to the reduction of the variance in the measured biochemical concentration. A significant problem with the use of stepwise regression for determining the correlation between biochemical concentration and spectra is that of 'overfitting' as there are significantly more wavebands than biochemical measurements. This could result in the selection of wavebands which may be more accurately attributable to noise or canopy effects. In addition, there is a real problem of collinearity in that the individual biochemical concentrations may covary. A strong correlation between the reflectance at a given wavelength and the concentration of a biochemical of interest, therefore, may be due to the effect of another biochemical which is closely related. Furthermore, it is not always possible to account for potentially suitable waveband omissions in the stepwise selection procedure. This concern about the suitability of stepwise regression has been identified and acknowledged in a number of recent studies (Wessman et al., 1988, Curran, 1989, Curran et al., 1992, Peterson and Hubbard, 1992, Martine and Aber, 1994, Kupiec, 1994). These studies have pointed to the lack of a physical link between wavelengths chosen by stepwise regression and the biochemical of interest, and this in turn has cast doubts on the use of imaging spectrometry for the estimation of foliar biochemical concentrations at sites distant from the training sites. To investigate this problem, an analysis was conducted on the variation in canopy biochemical concentrations and reflectance spectra using forced entry linear regression.

Dawson, Terence P.↗
NASA NTRS1994

Review of chemical-kinetic problems of future NASA missions, II: Mars entries

The present work aims to derive a set of thermomechanical relaxation rate parameters and chemical reaction rate coefficients relevant to future interplanetary missions. It also attempts to assess the impact of thermochemical nonequilibrium phenomena on radiative heating rates for the stagnation point of the Martian entry vehicle.

TRT-EXPERIMENTAL↗
NASA NTRS1993

The Pioneer Venus Orbiter entry phase

In October, 1992 the Pioneer Venus Orbiter entered the atmosphere of Venus, ending nearly 14 years of observations at Venus. Prior to the entry into the atmosphere and subsequent loss of the spacecraft careful management of spacecraft resources had allowed the acquisition of much low altitude data over the nightside of the planet. The long duration of the Pioneer Venus mission has enabled us to study the ionosphere and atmosphere of Venus under different levels of solar activity.

Strangeway, R. J.↗
NASA NTRS1993

The magnetic state of the lower ionosphere during Pioneer Venus entry phase

During the entry phase of the Pioneer Venus Orbiter (PVO), defined as that period at the end of mission in 1992 when the periapsis fell below 185 km, the magnetometer made repeated measurements throughout the post midnight ionosphere until about 0430 LT. In this region the magnetic field is generally stronger at comparable altitudes than it was earlier at times of higher solar activity. This increase combined with a decrease in electron density causes the ratio of the magnetic pressure to thermal pressure to approach unity at altitudes above 200 km, whereas it was much lower than unity at these altitudes during solar maximum. From 160-200 km the magnetic field pressure exceeds that of the ionospheric plasma quite unlike the usual conditions seen at the beginning of the mission. At lowest altitudes below 150 km, however, the field becomes weaker and hence no evidence for a planetary magnetic field is found.

Russell, C. T.↗
NASA NTRS1993

Neutral composition measurements by the Pioneer Venus Neutral Mass Spectrometer during orbiter re-entry

Measurements by the Pioneer Venus Orbiter Neutral Mass Spectrometer (ONMS) instrument during Orbiter re-entry have been made from 18-24 hours local solar time, above 170 km, of He, and from midnight to 4.5 hours below 200 km of He, N, O, CO, N2, and CO2. Preliminary results indicate that in the post-midnight sector He is the dominant species above 170 km, O the dominant species from 140-170 km and CO2 the dominant species below 140 km. Estimated scale height temperatures for He, O, and CO2 of about 105-120 K are similar to those observed in 1978-1980 at higher solar activity. The densities at 1 am local solar time and at 150 km are within 35% of those measured earlier. The He bulge is also similar to that observed in 1978-1980 confirming that thermosphere superrotation is still present. Comparison with the results of a Venus Thermosphere General Circulation Model suggests the nightside is not sensitive to changes in solar activity due to the isolation of the day and night thermospheres. apparently, the relatively small changes in the dayside thermosphere with solar activity have little impact on the nightside thermosphere.

Kasprzak, W. T.↗
NASA NTRS1994

Direct entry of dense flowing plasmas into the distant tail lobes

Electric field, magnetic field, and spacecraft potential measurements on the Geotail satellite have confirmed earlier observations of relatively dense flowing plasmas in the magnetotail lobes. Within these flowing plasmas, density discontinuities of factors of 2 to 4 were observed. At least 15 of the 18 magnetopause crossings that occurred during a 24-hour interval when the spacecraft was at GSM coordinates near X = -140 R(sub e), Y = 0, and Z = 15 R(sub e), were rotational discontinuities across which the magnetosheath plasma had direct entry into the tail lobes. Within the lobes near the rotational discontinuities, the spacecraft typically crossed a second boundary at which the plasma density decreased from its magnetosheath value by a typical factor of 1.5 to 3 while the magnetic field strength and flow speed increased. Equatorward of this density discontinuity, the plasma density and flow remained appreciable. At least 2 of the 18 magnetopause crossings may have been tangential discontinuities across which the density and magnetic field strength both changed. Within the lobes near these tangential discontinuities, significant densities of flowing plasma were observed. Since 11 of the 18 discontinuities were crossed within a time interval of less than 7 seconds, the bondary current layer was well-defined and very thin.

Mozer, F. S.↗
NASA NTRS1995

Asteroid entry in Venusian atmosphere: Pressure and density fields effect on crater formation

The objectives are to look at time scales of overpressure compared to cratering and to determine: what are the transient pressure and density due to atmospheric entry; do shock waves evacuate ambient gas; do transient atmospheric disturbances 'settle down' during cratering; can the pressure/density field be approximated as quasi-static; how does disturbance scale with impactor size; and what is the role of atmospheric thickness. The general approach is to perform inexpensive exploratory calculations, perform experiments to validate code and observe crater growth, and to follow up with more realistic coupling calculations. This viewgraph presentation presents progress made with the objective to obtain useful scaling relationships for crater formation when atmospheric effects are important.

Schmidt, Robert↗
NASA NTRS1995

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 53: From student to entry-level professional: Examining the technical communications practices of early career-stage US aerospace engineers and scientists

Studies indicate that communications and information-related activities take up a substantial portion of an engineer's work week; therefore, effective communications and information-use skills are one of the key engineering competencies that early career-stage aerospace engineers and scientists must possess to be successful. Feedback from industry rates communications and information-use skills high in terms of their importance to engineering practice; however, this same feedback rates the communications and information-use skills of early career-stage engineers low. To gather adequate and generalizable data about the communications and information-related activities of entry-level aerospace engineers and scientists, we surveyed 264 members of the AIAA who have no more than 1-5 years of aerospace engineering work experience. To learn more about the concomitant communications norms, we compared the results of this study with data (1,673 responses) we collected from student members of the AIAA and with data (341 responses) we collected from a study of aerospace engineering professionals. In this paper, we report selected results from these studies that focused on the communications practices and information-related activities of early career-stage U.S. aerospace engineers and scientists in the workplace.

Pinelli, Thomas E.↗
NASA NTRS1996

South Atlantic Anomaly Entry and Exit as Measured by the X-Ray Timing Explorer

The Rossi X-ray Timing Explorer (RXTE) carries instruments that must switch off high voltages (HV) when passing through the South Atlantic Anomaly (SAA). The High Energy X-ray Timing Experiment (HEXTE) contains a particle monitor that detects the increased particle flux associated with the SAA and autonomously reduces its voltage. The Proportional Counter Array (PCA) relies on uplinked predictions of SAA entry/exit times based on ephemeris data provided by the Flight Dynamics Facility. A third instrument, the All-Sky Monitor (ASM) also uses a predicted SAA model to reduce voltage when passing through the SAA. Data collected from the HEXTE particle monitor, as well as other instrument readings near the times of SAA entry/exit offer the potential for refining models of the boundaries of the SAA. The SAA has an increased particle flux which causes high rates of detection in the RXTE instruments designed to observe x-rays. The high counting rates could degrade the PCA if HV is not reduced during SAA passages. On the other hand, PCA downtime can be minimized and the science return can be optimized by having the best possible model of the SAA boundary. Thus, the PCA team planned an extensive effort during in-orbit checkout to utilize both the HEXTE particle monitor data and instrument counting rates to refine the model of the SAA boundary. The times of SAA entry and exit are compared with the definitive epemeris to determine the precise location (latitude and longitude) of the SAA boundary. Over time, the SAA and its perimeter were mapped. The RXTE Science Operations Center is continuously working to feed back the results of this effort into the science scheduling process, improving the SAA model as it affects the RXTE instruments, thus obtaining more accurate estimates of the SAA entry/exit times.

Smith, Evan↗
NASA NTRS1997

Rarefied Flows of Planetary Entry Capsules

The impact of rarefaction on entry capsules and spacecraft aerothermodynamics is emphasized for various aeroassist missions. The capability of the direct simulation Monte Carlo (DSMC) method to simulate such flows is demonstrated through examples of validation studies and applications. Several space flight projects and ground-based experiments are reviewed for which rarefaction effects have significant effect on spacecraft performance or experimental measurements. This review clearly demonstrates the significant role that the DSMC method plays in characterizing such flows.

James N Moss↗
NASA NTRS1997

Real Gas: CFD Prediction Methodology Flow Physics for Entry Capsule Mission Scenarios

Mission and concept studies for space exploration are described for the purpose of identifying flow physics for entry capsule mission scenarios. These studies are a necessary precursor to the development and application of CFD prediction methodology for capsule aerothermodynamics. The scope of missions considered includes manned and unmanned cislunar missions, missions to the minor planets, and missions to the major planets and other celestial objects in the solar system.

Deiwert, George S.↗
NASA NTRS1996

Six Degree-of-Freedom Entry Dispersion Analysis for the METEOR Recovery Module

The present study performs a six degree-of-freedom entry dispersion analysis for the Multiple Experiment Transporter to Earth Orbit and Return (METEOR) mission. METEOR offered the capability of flying a recoverable science package in a microgravity environment. However, since the Recovery Module has no active control system, an accurate determination of the splashdown position is difficult because no opportunity exists to remove any errors. Hence, uncertainties in the initial conditions prior to deorbit burn initiation, during deorbit burn and exo-atmospheric coast phases, and during atmospheric flight impact the splashdown location. This investigation was undertaken to quantify the impact of the various exo-atmospheric and atmospheric uncertainties. Additionally, a Monte-Carlo analysis was performed to statistically assess the splashdown dispersion footprint caused by the multiple mission uncertainties. The Monte-Carlo analysis showed that a 3-sigma splashdown dispersion footprint with axes of 43.3 nm (long), -33.5 nm (short), and 10.0 nm (crossrange) can be constructed. A 58% probability exists that the Recovery Module will overshoot the nominal splashdown site.

Desai, Prasun N.↗