Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

A VERY DEEP CHANDRA OBSERVATION OF A2052: BUBBLES, SHOCKS, AND SLOSHING

We present the first results from a very deep ({approx}650 ks) Chandra X-ray observation of A2052, as well as archival Very Large Array radio observations. The data reveal detailed structure in the inner parts of the cluster, including bubbles evacuated by radio lobes of the active galactic nucleus (AGN), compressed bubble rims, filaments, and loops. Two concentric shocks are seen, and a temperature rise is measured for the innermost one. On larger scales, we report the first detection of an excess surface brightness spiral feature. The spiral has cooler temperatures, lower entropies, and higher abundances than its surroundings, and is likely the result of sloshing gas initiated by a previous cluster-cluster or sub-cluster merger. Initial evidence for previously unseen bubbles at larger radii related to earlier outbursts from the AGN is presented.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Commissioning and operational results of helium refrigeration system at JLab for the 12GeV upgrade

The new 4.5 K refrigerator system at the Jefferson Lab (JLab) Central Helium Liquefier (CHL-2) for the 12 GeV upgrade was commissioned in late spring of 2013, following the commissioning of the new compressor system, and has been supporting 12 GeV LINAC commissioning since that time. Six design modes were tested during commissioning, consisting of a maximum capacity, nominal capacity, maximum liquefaction, maximum refrigeration, maximum fill and a stand-by/reduced load condition. The maximum capacity was designed to support a 238 g/s, 30 K and 1.16 bar cold compressor return flow, a 15 g/s, 4.5 K liquefaction load and a 12.6 kW, 35-55 K shield load. The other modes were selected to ensure proper component sizing and selection to allow the cold box to operate over a wide range of conditions and capacities. The cold box system is comprised of two physically independent cold boxes with interconnecting transfer-lines. The outside (upper) 300-60 K vertical cold box has no turbines and incorporates a liquid nitrogen pre-cooler and 80-K beds. The inside (lower) 60-4.5 K horizontal cold box houses seven turbines that are configured in four expansion stages including one Joule-Thompson expander and a 20-K bed. The helium compression system has five compressors to support three pressure levels in the cold box. This paper will summarize the analysis of the test data obtained over the wide range of operating conditions and capacities which were tested.

Knudsen, Peter N.↗
DOE OSTI2025

Exploring the interaction between the MW and LMC with a large sample of blue horizontal branch stars from the DESI survey

The Large Magellanic Cloud (LMC) is a Milky Way (MW) satellite that is massive enough to gravitationally attract the MW disc and inner halo, causing significant motion of the inner MW with respect to the outer halo. In this work, we probe this interaction by constructing a sample of 9866 blue horizontal branch (BHB) stars with radial velocities from the DESI spectroscopic survey out to 120 kpc from the Galactic centre. This is the largest spectroscopic set of BHB stars in the literature to date, and it contains four times more stars with Galactocentric distances beyond 50 kpc than previous BHB catalogues. Using the DESI BHB sample combined with SDSS BHBs, we measure the bulk radial velocity of stars in the outer halo and observe that the velocity in the Southern Galactic hemisphere is different by 3.7σ from the North. Modelling the projected velocity field shows that its dipole component is directed at a point 22 deg away from the LMC along its orbit, which we interpret as the travel direction of the inner MW. The velocity field includes a monopole term that is –24 km s –1 ⁠, which we refer to as compression velocity. This velocity is significantly larger than predicted by the current models of the MW and LMC interaction. This work uses DESI data from its first 2 yr of observations, but we expect that with upcoming DESI data releases, the sample of BHB stars will increase and our ability to measure the MW–LMC interaction will improve significantly.

Galaxy: evolution↗
DOE OSTI2011

Magnetocaloric effect in La(Fe{sub x}Si{sub 1-x}){sub 13} ferromagnets

The isothermal changes in the magnetic entropy and the lattice entropy and the adiabatic temperature change in La(Fe{sub 0.88}Si{sub 0.12}){sub 13} and La(Fe{sub 0.86}Si{sub 0.14}){sub 13} ferromagnets in a magnetic field are calculated. The calculations are performed with a generalized magnetostriction model of a ferromagnet; the calculation results are compared to experimental data. It is shown that the change in the lattice entropy decreases the magnetocaloric effect and makes it possible to explain the experimental data obtained for La(Fe{sub x}Si{sub 1-x}){sub 13} (x = 0.86, 0.88) ferromagnets. The temperature dependences of the bulk compression moduli of these ferromagnets are calculated, and these dependences indicate a strong lattice softening in the vicinity of the magnetic phase transition in them. The thermal expansion coefficient and some magnetic properties of the ferromagnet with x = 0.86 are measured to determine the numerical values of the parameters entering into calculation formulas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

The Continuous Readout Stream of the MicroBooNE Liquid Argon Time Projection Chamber for Detection of Supernova Neutrinos

The MicroBooNE Continuous Readout Stream is a parallel readout of the MicroBooNE liquid argon time projection chamber (LArTPC) which enables detection of non-beam events such as those from a supernova neutrino burst. The low energies of these neutrinos and the intense cosmic-ray flux due to the near-surface detector location makes triggering on these events very challenging. Instead, MicroBooNE has pioneered a novel approach for detecting supernova neutrinos relying on a delayed trigger generated by SNEWS (the Supernova Early Warning System). The continuous readout of the LArTPC is achieved through the use of real-time compression algorithms (zero suppression and Huffman compression) implemented in an FPGA (field-programmable gate array) in the readout electronics. We present the results of the optimization of the data reduction algorithms, and their operational performance. In order to demonstrate the capability of the continuous stream to detect low-energy electrons, a sample of Michel electrons from stopping cosmic-ray muons is reconstructed and compared to a similar sample from the lossless triggered readout stream.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Compressed sensing methods with applications to advanced air sampling

Environmental sampling methods developed by the Savannah River National Laboratory (SRNL) employ collectors with sorbent media tubes set at various locations to collect airborne emissions. Laboratory analyses of these tubes results in one-dimensional signals regarding what chemicals are being released and transported within the atmosphere. The analysis process is time consuming especially when analyzing a full year’s worth of tubes (hourly sample collection results in nearly 9,000 tubes per year). Using a signal processing method such as compressed sensing allows for recreation of the full signal while greatly reducing the number of analyzed samples required. Due to the sparsity of data retrieved from the air tubes, it is possible to use measurements a fraction of the size of the original data to gain much of the same information. This would improve the overall time and cost of analysis when modeling one-dimensional sampling signals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Compressed Sensing Methods with Applications to Advanced Air Sampling [Poster]

Environmental sampling methods developed by the Savannah River National Laboratory (SRNL) employ collectors with sorbent media tubes set at various locations to collect airborne emissions. Laboratory analyses of these tubes results in one-dimensional signals regarding what chemicals are being released and transported within the atmosphere. The analysis process is time consuming especially when analyzing a full year’s worth of tubes (hourly sample collection results in nearly 9,000 tubes per year). Using a signal processing method such as compressed sensing allows for recreation of the full signal while greatly reducing the number of analyzed samples required. Due to the sparsity of data retrieved from the air tubes, it is possible to use measurements a fraction of the size of the original data to gain much of the same information. This would improve the overall time and cost of analysis when modeling one-dimensional sampling signals.

Campbell, Cassidy [Savannah River National Laborat↗
DOE OSTI2017

An immersed boundary method for fluid–structure interaction with compressible multiphase flows

This paper presents a two-dimensional immersed boundary method for fluid–structure interaction with compressible multiphase flows involving large structure deformations. This method involves three important parts: flow solver, structure solver and fluid–structure interaction coupling. In the flow solver, the compressible multiphase Navier–Stokes equations for ideal gases are solved by a finite difference method based on a staggered Cartesian mesh, where a fifth-order accuracy Weighted Essentially Non-Oscillation (WENO) scheme is used to handle spatial discretization of the convective term, a fourth-order central difference scheme is employed to discretize the viscous term, the third-order TVD Runge–Kutta scheme is used to discretize the temporal term, and the level-set method is adopted to capture the multi-material interface. In this work, the structure considered is a geometrically non-linear beam which is solved by using a finite element method based on the absolute nodal coordinate formulation (ANCF). The fluid dynamics and the structure motion are coupled in a partitioned iterative manner with a feedback penalty immersed boundary method where the flow dynamics is defined on a fixed Lagrangian grid and the structure dynamics is described on a global coordinate. We perform several validation cases (including fluid over a cylinder, structure dynamics, flow induced vibration of a flexible plate, deformation of a flexible panel induced by shock waves in a shock tube, an inclined flexible plate in a hypersonic flow, and shock-induced collapse of a cylindrical helium cavity in the air), and compare the results with experimental and other numerical data. The present results agree well with the published data and the current experiment. Finally, we further demonstrate the versatility of the present method by applying it to a flexible plate interacting with multiphase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Autoignition study of iso -cetane/tetralin blends at low temperature

iso-Cetane and tetralin are the two fuel components commonly considered in literature diesel surrogates, and are hydrocarbon classes representative of iso-alkanes and naphthoaromatics, respectively. Since both surrogate components are involved in the key reactions controlling the autoignition reactivity of diesel surrogates, autoignition studies of iso-cetane, tetralin, and their blending behavior at low temperatures can be helpful in developing/refining chemical kinetic models of diesel surrogates, in order to better predict diesel ignition response under low temperature combustion conditions. In this investigation, autoignition experiments of iso-cetane, tetralin, and their binary mixtures at varying blending ratios have been conducted in a rapid compression machine (RCM) in the temperature/pressure range of 630–930 K and 10–20 bar. For the neat fuel components, the newly-acquired RCM data have been compared with the literature experimental results at some overlapping conditions. In addition, a chemical kinetic model describing the oxidation of iso-cetane and tetralin compiled/updated from the diesel surrogate model developed by Lawrence Livermore National Laboratory is used to simulate the experimental datasets. It is shown that this model exhibits good agreement with the experimental results of tetralin and also predicts the total ignition delay times of iso-cetane at lower temperatures reasonably well. However, the current model fails to fully capture the increase of total ignition delay time with increasing amount of tetralin in the binary blends observed in the present RCM experiments. Therefore, chemical kinetic analyses of the current model are conducted to help identify possible reasons leading to the discrepancies between simulations and experiments. Furthermore, the chemical kinetic interactions between iso-cetane and tetralin are explored by including additional cross-reactions among iso-cetane, tetralin, and their fuel fragments in the current model to assess their effects on model predictions. As a result, based on the chemical kinetic analysis results, future direction for model refinements is discussed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Real-fluid behavior in rapid compression machines: Does it matter?

Rapid compression machines (RCMs) have been extensively used to quantify fuel autoignition chemistry and validate chemical kinetic models at high-pressure conditions. Historically, the analyses of experimental and modeling RCM autoignition data have been conducted based on the adiabatic core hypothesis with ideal gas assumption, where real-fluid behavior has been completely overlooked, though this might be significant at common RCM test conditions. Here, this work presents a first-of-its-kind study that addresses two significant but overlooked questions for autoignition studies within RCMs in the fundamental combustion community: (i) experiment-wise, can unaccounted-for real-fluid behavior in RCMs affect the interpretation and analysis of RCM experimental data? and (ii) simulation-wise, can unaccounted-for real-fluid behavior in RCMs affect RCM autoignition modeling and the validation of chemical kinetic models? To this end, theories for real-fluid isentropic change are newly proposed and derived based on high-order Virial EoS, and are further incorporated into an effective-volume real-fluid autoignition modeling framework newly developed for RCMs. With detailed analyses, the strong real-fluid behavior in representative RCM tests is confirmed, which can greatly influence the interpretation of RCM autoignition experiments, particularly the determination of end-of-compression temperature and evolution of the adiabatic core in the reaction chamber. Furthermore, real-fluid RCM modeling results reveal that considerable error can be introduced into simulating RCM autoignition experiments when following the community-wide accepted effective-volume approach by assuming ideal-gas behavior, which can be as high as 64% in the simulated ignition delay time at compressed pressure of 125 bar and lead to contradictory validation results of chemical kinetic models. Therefore, we recommend the community to adopt frameworks with real-fluid behavior fully accounted for (e.g., the one developed in this study) to analyze and simulate past and future RCM experiments, so as to avoid misinterpretation of RCM autoignition experiments and eliminate the potential errors that can be introduced into the simulation results with the existing RCM modeling frameworks.

High-order Virial equation of state↗
DOE OSTI2020

A spherical crystal diffraction imager for Sandia’s Z Pulsed Power Facility

Sandia’s Z Pulsed Power Facility is able to dynamically compress matter to extreme states with exceptional uniformity, duration, and size, which are ideal for investigating fundamental material properties of high energy density conditions. X-ray diffraction (XRD) is a key atomic scale probe since it provides direct observation of the compression and strain of the crystal lattice and is used to detect, identify, and quantify phase transitions. Because of the destructive nature of Z-Dynamic Material Property (DMP) experiments and low signal vs background emission levels of XRD, it is very challenging to detect a diffraction signal close to the Z-DMP load and to recover the data. We have developed a new Spherical Crystal Diffraction Imager (SCDI) diagnostic to relay and image the diffracted x-ray pattern away from the load debris field. The SCDI diagnostic utilizes the Z-Beamlet laser to generate 6.2-keV Mn–He α x rays to probe a shock-compressed material on the Z-DMP load. Finally, a spherically bent crystal composed of highly oriented pyrolytic graphite is used to collect and focus the diffracted x rays into a 1-in. thick tungsten housing, where an image plate is used to record the data.

47 OTHER INSTRUMENTATION↗
DOE OSTI2011

Materials for High-Pressure Fuel Injection Systems

The high-level goal of this multi-year effort was to facilitate the Advanced Combustion Engine goal of 20% improvement (compared to 2009 baseline) of commercial engine efficiency by 2015. A sub-goal is to increase the reliability of diesel fuel injectors by investigating modelbased scenarios that cannot be achieved by empirical, trial and error methodologies alone. During this three-year project, ORNL developed the methodology to evaluate origins and to record the initiation and propagation of fatigue cracks emanating from holes that were electrodischarge machined (EDM), the method used to form spray holes in fuel injector tips. Both x-ray and neutron-based methods for measuring residual stress at four different research facilities were evaluated to determine which, if any, was most applicable to the fuel injector tip geometry. Owing to the shape and small volumes of material involved in the sack area, residual stress data could only be obtained in the walls of the nozzle a few millimeters back from the tip, and there was a hint of only a small compressive stress. This result was consistent with prior studies by Caterpillar. Residual stress studies were suspended after the second year, reserving the possibility of pursuing this in the future, if and when methodology suitable for injector sacks becomes available. The smooth specimen fatigue behavior of current fuel injector steel materials was evaluated and displayed a dual mode initiation behavior. At high stresses, cracks started at machining flaws in the surface; however, below a critical threshold stress of approximately 800 MPa, cracks initiated in the bulk microstructure, below the surface. This suggests that for the next generation for high-pressure fuel injector nozzles, it becomes increasingly important to control the machining and finishing processes, especially if the stress in the tip approaches or exceeds that threshold level. Fatigue tests were also conducted using EDM notches in the gage sections. Compared to the smooth specimens, EDM notching led to a severe reduction in total fatigue life. A reduction in fatigue life of nearly four orders of magnitude can occur at an EDM notch the approximate size of fuel injector spray holes. Consequently, the initiation and propagation behavior of cracks from small spray holes is relevant for generation of design quality data for the next generation diesel fuel injection devices. This is especially true since the current design methodologies usually rely on the less conservative smooth specimen fatigue testing results, and since different materials can have varying levels of notch fatigue resistance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

An investigation of shock-induced phase transition in soda-lime glass

There exists a large body of evidence from experiments and molecular dynamics simulations to suggest the occurrence of phase transitions in soda-lime glass (SLG) and other silica glasses subject to shock compression to pressures above 3 GPa. In light of these findings, the current work investigated the existence of phase transition in SLG using shock and release experiments. The experiments employed symmetric SLG–SLG impact to achieve complete unloading to zero stress after shock compression to stresses in the range of 3–7 GPa. The stress–strain response and the Lagrangian release wave speed behavior of SLG obtained from these experiments are seen to reveal a mismatch between the loading and unloading paths of the pressure–strain curve for the material, which serves as compelling evidence for the occurrence of a shock-induced phase transition in the material at relatively low pressures. Furthermore, the release wave speed vs strain data obtained from experiments were used to construct a methodology for modeling the shock and release behavior of SLG. Lastly, this scheme implemented in numerical simulations was able to capture the release behavior of shock compressed SLG, for which a robust and satisfactory model was previously unavailable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Search for supersymmetry using vector boson fusion signatures and missing transverse momentum in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

This paper presents a search for supersymmetric particles in models with highly compressed mass spectra, in events consistent with being produced through vector boson fusion. The search uses 140 fb −1 of proton-proton collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS experiment at the Large Hadron Collider. Events containing at least two jets with a large gap in pseudorapidity, large missing transverse momentum, and no reconstructed leptons are selected. A boosted decision tree is used to separate events consistent with the production of supersymmetric particles from those due to Standard Model backgrounds. The data are found to be consistent with Standard Model predictions. The results are interpreted using simplified models of R-parity-conserving supersymmetry in which the lightest supersymmetric partner is a bino-like neutralino with a mass similar to that of the lightest chargino and second-to-lightest neutralino, both of which are wino-like. Lower limits at 95% confidence level on the masses of next-to-lightest supersymmetric partners in this simplified model are established between 117 and 120 GeV when the lightest supersymmetric partners are within 1 GeV in mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Compact video content representation for video coding using low multi-linear tensor rank approximation with dynamic core tensor order

Tensor is a multi-way representation of an entity that is widely used in many applications of mathematics and physics. The wide range of tensor algebra operations attract the researchers of graphical and vision field to identify unique methods for various applications such as segmentation, compression, indexing and so on. In this paper, low multi-linear rank approximation of a tensor is used for decomposition so as to perform compression on a video that is represented as a 4D tensor. Thus, the encoder has blocks for (1) multilinear rank approximation method so as to aid decomposition, (2) sparsity removal of residual data to reduce the required memory storage to a small level, (3) quantization on the sparse less residual data and (4) LZ77 dictionary coding for the video. The decoder uses a tensor reconstruction block along with residual error correction block that reduces loss/error in the reconstructed video. The size of core tensor is an important factor in rank approximation. It is identified at run time depending on the video contents. This size is determined adaptively using Tikhonov’s regularization method. The best value of core tensor size is identified with the corner of L-curve which preserves the video contents from heavy loss/error. Experimental results of the proposed work on comparison with H.264/AVC compression method indicate that the proposed method achieves up to 10% improvement in compression ratio with the least amount of loss and a maximum signal to noise ratio of 0.14. The proposed system gives better compression ratio than H.265 for videos with more number of frames without compromising quality.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Reassessing early-age strength development of high-volume fly ash concretes for precast buildings

Increasing beneficial use of fresh or landfilled fly ash as a replacement for Portland cement can be more challenging for the construction of precast buildings or similar applications requiring rapid strength development. Therefore, the framework presented in this paper aims to reassess high-volume fly ash concretes but in the context of facilitating more sustainable precast buildings. More specifically, the framework was used to characterize strength development of concrete mixes with a target minimum 24-hour compressive strength of 24.1 MPa (3500 psi), selected as an example strength development metric to demonstrate the framework, and comprised of 40% Class C, Class F, and landfilled (harvested) fly ash – as a high-volume replacement of Type III or Type IL cement. High-early strength was driven by optimized dosages of commercial grade gypsum and accelerating admixtures, in addition to optimal aggregate packing and mix proportioning strategies. Early-age mechanical properties including compressive strength, modulus of rupture, and modulus of elasticity were reevaluated within 24 hours of batching with respect to common precast production demands. Simple data analyses were then used to highlight cases where currently accepted design provisions for the aforementioned properties are either overly-conservative or unconservative with respect to test data. Furthermore, the framework and demonstration of example mixes presented herein aim to promote confidence for using larger fractions of fresh or landfilled fly ashes for precast buildings to further enhance environmental benefits without sacrificing pertinent early-age structural performance.

42 ENGINEERING↗
DOE OSTI2023

SPH modeling of biomass granular flow: Theoretical implementation and experimental validation

The commercialization of biomass-derived energy is impeded by flowability challenges arising from the feeding and handling of granular biomass materials in full-scale biorefineries. To overcome these obstacles, a robust and accurate model to simulate the flow of granular biomass is indispensable. However, conventional mesh-based numerical codes are limited by inherent mesh distortion in simulating large deformation that commonly occurs in granular biomass handling. Here, in this study, we propose a graphics processing unit (GPU)-accelerated meshless Smoothed Particle Hydrodynamics (SPH) code to model the flow of granular biomass materials. A modified void ratio-based mass conversation, a hybrid particle-to-particle/surface frictional boundary treatment, and a hypoplastic constitutive model are implemented. Four numerical examples, an elastic block sliding on inclined planes, sand column collapse, Angle of Repose, and axial compression tests for pine chips, were simulated using the developed SPH code. The results demonstrate good agreement between numerical predictions and analytical and experimental data for all four examples, validating the SPH code and increasing confidence that it can be applied to simulate more complex granular biomass handling processes, such as hopper feeding or auger conveyance.

09 BIOMASS FUELS↗