Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Elevated acetate concentrations in the rhizosphere of Spartina alterniflora and potential influences on sulfate reduction

Acetate is important in anaerobic metabolism of non-vegetated sediments but its role in salt marsh soils was not investigated thoroughly. Acetate concentrations, oxidation (C-14) and SO4(2-) reduction (S-35) were measured in S. alterniflora soils in NH and MA. Pore water from cores contained greater than 0.1 mM acetate and in some instances greater than 1.0 mM. Non-destructive samples contained less than 0.01 mM. Acetate was associated with roots and concentrations were highest during vegetative growth and varied with changes in plant physiology. Acetate turnover was very low whether whole core or slurry incubations were used. Radiotracers injected directly into soils yielded rates of SO4(2-) reduction and acetate oxidation not significantly different from core incubation techniques. Regardless of incubation method, acetate oxidation did not account for a significant percentage of SO4(2-) reduction. These results differ markedly from data for non-vegetated coastal sediments where acetate levels are low, oxidation rate constants are high and acetate oxidation rates greatly exceed rates of SO4(2-) reduction. The discrepancy between rates of acetate oxidation and SO4(2-) reduction in marsh soils may be due either to the utilization of substrates other than acetate by SO4(2-) reducers or artifacts associated with measurements of organic utilization by rhizosphere bacteria.

Hines, Mark E.↗

The Role of Hydrophobic Nodes in the Dynamics of Class A β-Lactamases

Class A β-lactamases are known for being able to rapidly gain broad spectrum catalytic efficiency against most β-lactamase inhibitor combinations as a result of elusively minor point mutations. The evolution in class A β-lactamases occurs through optimisation of their dynamic phenotypes at different timescales. At long-timescales, certain conformations are more catalytically permissive than others while at the short timescales, fine-grained optimisation of free energy barriers can improve efficiency in ligand processing by the active site. Free energy barriers, which define all coordinated movements, depend on the flexibility of the secondary structural elements. The most highly conserved residues in class A β-lactamases are hydrophobic nodes that stabilize the core. To assess how the stable hydrophobic core is linked to the structural dynamics of the active site, we carried out adaptively sampled molecular dynamics (MD) simulations in four representative class A β-lactamases (KPC-2, SME-1, TEM-1, and SHV-1). Using Markov State Models (MSM) and unsupervised deep learning, we show that the dynamics of the hydrophobic nodes is used as a metastable relay of kinetic information within the core and is coupled with the catalytically permissive conformation of the active site environment. Finally, our results collectively demonstrate that the class A enzymes described here, share several important dynamic similarities and the hydrophobic nodes comprise of an informative set of dynamic variables in representative class A β-lactamases.

59 BASIC BIOLOGICAL SCIENCES↗

THE STAR FORMATION RATE AND GAS SURFACE DENSITY RELATION IN THE MILKY WAY: IMPLICATIONS FOR EXTRAGALACTIC STUDIES

We investigate the relation between star formation rate (SFR) and gas surface densities in Galactic star-forming regions using a sample of young stellar objects (YSOs) and massive dense clumps. Our YSO sample consists of objects located in 20 large molecular clouds from the Spitzer cores to disks (c2d) and Gould's Belt (GB) surveys. These data allow us to probe the regime of low-mass star formation, essentially invisible to tracers of high-mass star formation used to establish extragalactic SFR-gas relations. We estimate the gas surface density ({Sigma}{sub gas}) from extinction (A{sub V}) maps and YSO SFR surface densities ({Sigma}{sub SFR}) from the number of YSOs, assuming a mean mass and lifetime. We also divide the clouds into evenly spaced contour levels of A{sub V} , counting only Class I and Flat spectral energy distribution YSOs, which have not yet migrated from their birthplace. For a sample of massive star-forming clumps, we derive SFRs from the total infrared luminosity and use HCN gas maps to estimate gas surface densities. We find that c2d and GB clouds lie above the extragalactic SFR-gas relations (e.g., Kennicutt-Schmidt law) by factors of up to 17. Cloud regions with high {Sigma}{sub gas} lie above extragalactic relations up to a factor of 54 and overlap with high-mass star-forming regions. We use {sup 12}CO and {sup 13}CO gas maps of the Perseus and Ophiuchus clouds from the COMPLETE survey to estimate gas surface densities and compare to measurements from A{sub V} maps. We find that {sup 13}CO, with the standard conversions to total gas, underestimates the A{sub V} -based mass by factors of {approx}4-5. {sup 12}CO may underestimate the total gas mass at {Sigma}{sub gas} {approx}> 200 M{sub sun} pc{sup -2} by {approx}>30%; however, this small difference in mass estimates does not explain the large discrepancy between Galactic and extragalactic relations. We find evidence for a threshold of star formation ({Sigma}{sub th}) at 129 {+-} 14 M{sub sun} pc{sup -2}. At {Sigma}{sub gas}>{Sigma}{sub th}, the Galactic SFR-gas relation is linear. A possible reason for the difference between Galactic and extragalactic relations is that much of {Sigma}{sub gas} is below {Sigma}{sub th} in extragalactic studies, which detect all the CO-emitting gas. If the Kennicutt-Schmidt relation ({Sigma}{sub SFR} {proportional_to} {Sigma}{sup 1.4}{sub gas}) and a linear relation between dense gas and star formation are assumed, the fraction of dense star-forming gas (f{sub dense}) increases as {approx}{Sigma}{sup 0.4}{sub gas}. When {Sigma}{sub gas} reaches {approx}300 {Sigma}{sub th}, the fraction of dense gas is {approx}1, creating a maximal starburst.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPLEX MOLECULES TOWARD LOW-MASS PROTOSTARS: THE SERPENS CORE

Gas-phase complex organic molecules are commonly detected toward high-mass protostellar hot cores. Detections toward low-mass protostars and outflows are comparatively rare, and a larger sample is the key to investigate how the chemistry responds to its environment. Guided by the prediction that complex organic molecules form in CH{sub 3}OH-rich ices and thermally or non-thermally evaporate with CH{sub 3}OH, we have identified three sight lines in the Serpens core-SMM1, SMM4, and SMM4-W-which are likely to be rich in complex organics. Using the IRAM 30 m telescope, narrow lines (FWHM of 1-2 km s{sup -1}) of CH{sub 3}CHO and CH{sub 3}OCH{sub 3} are detected toward all sources, HCOOCH{sub 3} toward SMM1 and SMM4-W, and C{sub 2}H{sub 5}OH not at all. Beam-averaged abundances of individual complex organics range between 0.6% and 10% with respect to CH{sub 3}OH when the CH{sub 3}OH rotational temperature is applied. The summed complex organic abundances also vary by an order of magnitude, with the richest chemistry toward the most luminous protostar SMM1. The range of abundances compare well with other beam-averaged observations of low-mass sources. Complex organic abundances are of the same order of magnitude toward low-mass protostars and high-mass hot cores, but HCOOCH{sub 3} is relatively more important toward low-mass protostars. This is consistent with a sequential ice photochemistry, dominated by CHO-containing products at low temperatures and early times.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of Cavity Diameter on Acoustic Impedance in a Complex Acoustic Environment

This paper investigates the effects of cavity diameter on the acoustic performance of conventional perforate-over-honeycomb liners. This investigation is a follow up to a previous study where it was demonstrated that the cavity diameter has a relatively small effect on the acoustic impedance for core cavity diameters up to 2.0 inches. In the current study, liner concepts are exposed to a complex acoustic environment, where higher-order modes are present. Four liner configurations are explored in this investigation, which include two cavity cores of different cavity diameters combined with two facesheets. These configurations are tested in the Grazing Flow Impedance Tube (GFIT) at Mach 0.0, 0.3, and 0.5 at a source sound pressure level of 150 dB. A comparison of the acoustic performance of these samples suggests that the cavity diameter has a relatively small effect on the acoustic impedance for core cavity diameters up to 2.0 inches at these conditions. These configurations are exposed to a more complex acoustic environment (e.g., higher-order modes) in the Curved Duct Test Rig (CDTR) at Mach 0.0 and 0.3.

Brown, M. C.↗

Electronic environments in Ni{sub 3}Pb{sub 2}S{sub 2} (shandite) and its initial oxidation in air

Polycrystalline Ni{sub 3}Pb{sub 2}S{sub 2} (shandite) was synthesised as a non-porous ingot to enable representative surfaces prepared by fracture under UHV to be characterised by X-ray photoelectron spectroscopy (XPS) before and after exposure to air. For an unoxidised surface, the S 2p{sub 3/2} binding energy was found to be significantly lower than those reported previously for shandite itself and other sulfides having shandite structure, and consistent with the physical and chemical properties of the shandites. The core electron binding energies for the three constituent elements were in agreement with the formal oxidation state representation Ni{sup 0}{sub 3}Pb{sup II}{sub 2}S{sup −II}{sub 2}, analogous to that deduced previously for Ni{sub 3}Sn{sub 2}S{sub 2}. Shandite surfaces were found to oxidise rapidly when initially exposed to air under ambient conditions, and concomitant with the formation of the Ni–O and Pb–O species, to restructure to NiS- and PbS-like surface phases having S core electron binding energies no higher than those for shandite. - Graphical abstract: Shandite ingot fracture surface in sample holder. Display Omitted - Highlights: • Shandite synthesised as ingot so that fracture surfaces were representative of bulk. • Surfaces prepared by fracture in vacuum characterised by XPS. • S 2p{sub 3/2} binding energy in range expected and lower than reported previously. • Ni, Pb and S core electron binding energies consistent with Ni{sup 0}{sub 3}Pb{sup II}{sub 2}S{sup −II}{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen reduction mechanisms of ilmenite between 823 and 1353 K

In situ gravimetric measurements and microscopic examinations were used to determine the mechanisms of oxygen removal from synthetic ilmenite disks between 823 and 1353 K. Under a hydrogen atmosphere, iron was observed to form a layer of low porosity on the surface of samples early in the reduction. This created diffusion limitations for hydrogen to the reaction front and for the escape of water vapor. A shrinking core reduction model, modified to include the growth of this iron film, was capable of predicting the conversion-time relationships of ilmenite samples. An activation energy of 43.2 +/- 2.6 kcal/gmole was determined to be representative of reaction control over the temperature range 823-1023 K.

Briggs, R. A.↗

How successful were the lunar sampling tools: Implications for sampling Mars

Like the Mars Sample Return endeavor, the Apollo lunar-sample program began with definition of strategy for sample collection and of scientific requirements for sampling hardware design. Several lessons can be illustrated by specific tools. The evolution of drive tubes from narrow 2 cm diameter, thick-walled tubes (used on Apollo 11, 12 and 14) to 4 cm diameter, thin-walled tubes used on Apollo 15, 16, and 17) as an example of the improvements made possible during multiple missions. The original Apollo 11 drive tube was designed to work in fluffy soil; thus, only 50 percent of the relatively dense lunar soil was recovered, and the core was distorted. The final configuration resulted in nearly 100 pct recovery with little distortion. The surface samplers (Contact Soil Sampling Devices) were designed to collect the upper 100 micrometer or the upper 1 mm of soil. It was over 2 years after the mission before these particularly specific samplers were opened because interest in them waned. Both core tubes and surface samplers were difficult to open in the laboratory. The Apollo Lunar Sample Return Containers (ALSRCs) were constructed with one indium and 2 Viton seals. They were closed on the lunar surface. Interior container pressures measured upon return to the laboratory indicate that these seals were not reliable in the lunar environment. Also, choice of indium as a sealing material interfered with siderophile analyses of samples.

Allton, J. H.↗

PROPERTIES OF THE MOLECULAR CORES OF LOW LUMINOSITY OBJECTS

We present a survey toward 16 low luminosity objects (LLOs with an internal luminosity, L{sub int}, lower than 0.2 L{sub ⊙}) with N{sub 2}H{sup +} (1–0), N{sub 2}H{sup +} (3–2), N{sub 2}D{sup +} (3–2), HCO{sup +} (3–2), and HCN (3–2) using the Arizona Radio Observatory Kitt Peak 12 m Telescope and Submillimeter Telescope. Our goal is to probe the nature of these faint protostars which are believed to be either very low mass or extremely young protostars. We find that the N{sub 2}D{sup +}/N{sub 2}H{sup +} column density ratios of LLOs are similar to those of typical starless cores and Class 0 objects. The N{sub 2}D{sup +}/N{sub 2}H{sup +} column density ratios are relatively high (>0.05) for LLOs with kinetic temperatures less than 10 K in our sample. The distribution of N{sub 2}H{sup +} (1–0) line widths spreads between that of starless cores and young Class 0 objects. If we use the line width as a dynamic evolutionary indicator, LLOs are likely young Class 0 protostellar sources. We further use the optically thick tracers, HCO{sup +} (3–2) and HCN (3–2), to probe the infall signatures of our targets. We derive the asymmetry parameters from both lines and estimate the infall velocities by fitting the HCO{sup +} (3–2) spectra with two-layer models. As a result, we identify eight infall candidates based on the infall velocities and seven candidates have infall signatures supported by asymmetry parameters from at least one of HCO{sup +} (3–2) and HCN (3–2)

79 ASTRONOMY AND ASTROPHYSICS↗

Metagenome-assembled genomes from East River floodplain sediments near Crested Butte, CO, USA (June to September 2019)

Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken in 2019 in June (flooded conditions) and September (drained conditions) at two locations (MCB1 and MCB3) near the Meander C/Pumphouse floodplain sites of the East River. Sediment cores were collected from 2 depths, a near-surface, generally unsaturated depth (30-40 centimeter (cm) depth below surface) and a deeper depth influenced by flooding with redoximorphic features (70-80 cm depth below surface). Sediments were homogenized from the 10 cm core for microbial analyses. A total of 24 metagenomes were sequenced through the Joint genome institute (JGI) corresponding to 8 samples sequenced in triplicate. These metagenomes can be found under Genomes Online Database (GOLD) sequencing project: Gs0141020. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 436 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.

54 ENVIRONMENTAL SCIENCES↗

Metagenome-assembled genomes from East River floodplain sediments near Crested Butte, CO, USA (June to September 2017)

Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken in 2017 in June (flooded conditions) and September (drained conditions) at two locations (MCB1 and MCB3) in an active meander (Meander C) of the East River. Sediment cores were collected from 2 depths, a near-surface, generally unsaturated depth (15-40 centimeter (cm) depth below surface) and a deeper depth influenced by flooding with redoximorphic features (50-88 cm depth below surface). Sediments were homogenized from the ~10 cm cores for microbial analyses. A total of 24 metagenomes were sequenced through the Joint genome institute (JGI) corresponding to 8 samples sequenced in triplicate. These metagenomes can be found under Genomes Online Database (GOLD) sequencing project: Gs0151851. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 405 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.

54 ENVIRONMENTAL SCIENCES↗

Metagenome-assembled genomes from East River floodplain sediments near Crested Butte, CO, USA (May to September 2018)

Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken in 2018 in May (flooded conditions) and September (drained conditions) at two locations (MCB1 and MCB3) near the Meander C/Pumphouse floodplain sites of the East River. Sediment cores were collected from 2 depths, a near-surface, generally unsaturated depth (30-40 centimeter (cm) depth below surface) and a deeper depth influenced by flooding with redoximorphic features (70-80 cm depth below surface). Sediments were homogenized from the 10 cm core for microbial analyses. A total of 24 metagenomes were sequenced through the Joint genome institute (JGI) corresponding to 8 samples sequenced in triplicate. These metagenomes can be found under Genomes Online Database (GOLD) sequencing project: Gs0141020. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 478 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.

54 ENVIRONMENTAL SCIENCES↗

One Giant Leap to Protect All Mankind: An Overview of the Lunar Receiving Laboratory

Motivation. In 1961, President John F. Kennedy charged the nation "to land a man on the moon and return him safely to Earth." Eight years later, the Apollo 11 astronauts splashed down in the Pacific Ocean after this first 8-day journey to the moon. As humans had never ventured to another extraterrestrial body, the U.S. government noted the great uncertainty associated with the unknown exposures related to this historic mission. Overview. With this uncertainty in mind, a newly formed Interagency Committee on Back Contamination (ICBC) was established to review the potential for lunar contaminants and establish the prevention of their escape into the biosphere during crew and sample recovery operations from the floating command module to the mobile quarantine facility on the recovery ship and return to the Johnson Space Center. Significance. As a result of the ICBC recommendations, in 1966 NASA planned and built the Lunar Receiving Laboratory (LRL) at the Johnson Space Center in Houston, Texas. The LRL served a great role in service of human space exploration to quarantine Apollo crewmembers, their space vehicles, and the lunar samples collected. Almost an afterthought in the space race to the Moon, the 83,000-square-foot LRL was designed and completed in 1967 for $7.8 million. The core purpose of the LRL was "to protect the public's health, agriculture, and other living resources; to provide lunar sample distribution to approved scientific investigators; and to preserve the scientific integrity of the lunar samples at all times." Its layout was comprised of three major zones: a quarantined Crew Area, a separate but also quarantined Sample Operations Area, and a Support and Administration Area outside the controlled biological barrier. This facility required trained personnel to live and perform within it for several weeks post-flight, to include astronaut crewmembers, flight surgeons, scientists, and vehicle recovery engineers. The LRL holds memories of these historic events but has since been repurposed for NASA's medical and environmental sciences activities, in what is now known as Building 37. As we approach its 50th anniversary, the LRL story will end in demolition as NASA advances its facilities for the next steps in human exploration of space. Learning Objectives: 1. To capture the historical relevance of the NASA Lunar Receiving Laboratory 2. To understand the requirements of receiving crew and samples from the moon for the first time 3. To describe the facility capabilities in protection of public health.

Hayes, Judith↗

BRIGHT RAY-LIKE FEATURES IN THE AFTERMATH OF CORONAL MASS EJECTIONS: WHITE LIGHT VERSUS ULTRAVIOLET SPECTRA

Current sheets (CSs) are important signatures of magnetic reconnection in the eruption of confined solar magnetic structures. Models of coronal mass ejections (CMEs) involve formation of a CS connecting the ejected flux rope with the post-eruption magnetic loops. CSs have been identified in white light (WL) images of CMEs as narrow rays trailing the outward moving CME core, and in ultraviolet spectra as narrow bright features emitting the [Fe XVIII] line. In this work, samples of rays detected in WL images or in ultraviolet spectra have been analyzed. Temperatures, widths, and line intensities of the rays have been measured, and their correlation to the CME properties has been studied. The samples show a wide range of temperatures with hot, coronal, and cool rays. In some cases, the UV spectra support the identification of rays as CSs, but they show that some WL rays are cool material from the CME core. In many cases, both hot and cool material are present, but offset from each other along the Ultraviolet Coronagraph Spectrometer slit. We find that about 18% of the WL rays show very hot gas consistent with the CS interpretation, while about 23% show cold gas that we attribute to cool prominence material draining back from the CME core. The remaining events have ordinary coronal temperatures, perhaps because they have relaxed back to a quiescent state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Candidate sample acquisition systems for the Rosetta

The Comet Nucleus Sample Return (CNSR) mission, one of the four cornerstones of the ESA scientific program, is one of the most complex space ventures within the next century, both from technological and deep space exploration point of view. In the Rosetta scenario the sample acquisition phase represents the most critical point for the global mission's success. The proposed paper illustrates the main results obtained in the context of the CNSR-SAS ongoing activity. The main areas covered are related to: (1) sample properties characterization (comet soil model, physical/chemical properties, reference material for testing); (2) concepts identification for coring, shovelling, harpooning and anchoring; (3) preferred concept (trade off among concepts, identification of the preferred configuration); and (4) proposed development activity for gaining the necessary confidence before finalizing the CNSR mission. Particular emphasis will be given to the robotic and flexibility aspects of the identified sample acquisition systems (SAS) configuration, intended as a means for the overall system performance enhancement.

Magnani, P. G.↗

Identification of shared viral sequences in peat moss metagenomes reveals elements of a possible Sphagnum core virome

Viruses are an understudied component of plant microbiomes. Identifying viruses that are shared between individual plants, or members of the “core virome”, could reveal stable viral populations with the potential to modulate the composition and function of the microbiome. Here, we examined the virome associated with Sphagnum mosses, a keystone species that has direct influence over the fate of peatland carbon stores. We analyzed bulk metagenomes and metatranscriptomes generated from Sphagnum field samples collected over a ten-month period to identify virus-like sequences shared among plants. Individual Sphagnum samples harbored distinct DNA and RNA viromes where only a small percentage (< 1%) of the total number of identified viral contigs were shared among all samples. Based on taxonomic classification, the shared viral contigs represent bacterial viruses, or phage (Caudoviricetes), as well as viruses of eukaryotes, namely nucleocytoplasmic large DNA viruses (Nucleocytoviricota) and RNA viruses (Riboviria). We linked the shared phage-like contigs to viral regions within sequenced genomes of bacterial taxa that are members of the Sphagnum core microbiome, suggesting that these contigs represent temperate phage or degraded prophage. The putative nucleocytoplasmic large DNA viruses and RNA viruses were phylogenetically diverse and showed sequence similarity to viruses associated with a broad range of hosts and environmental sources. The identification of shared viral contigs suggested that, despite the compositional heterogeneity between samples, Sphagnum mosses may harbor a core virome. Future work validating the presence of the core virome is warranted as it may aid in understanding how persistent viruses impact microbiome ecology and symbiont evolution within this climatically relevant keystone species.

Metagenomics↗

Morphology-controlled synthesis of Ti{sup 3+} self-doped yolk–shell structure titanium oxide with superior photocatalytic activity under visible light

Ti{sup 3+} self-doped yolk–shell structure titanium oxide nanoparticle aggregates are fabricated through an environmental template-free route and the reduction reaction at low temperature subsequently. After the Ti{sup 3+} doping, the reduced TiO{sub 2} sample exhibits a wide visible-light absorption ranged from 400 nm to 800 nm. The intrinsic hollow core–shell microstructure can make multiple reflections of light within the chamber, and thus results in more efficient use of the light source compared with solid structure. Besides, the large surface area can render the sample with a high activity. Therefore, Ti{sup 3+} self-doped yolk–shell structure titanium oxide exhibits a superior photocatalytic activity under visible light. This strategy is simple, cheap and mass-productive, which may shed light on a new avenue for large scale production of self-doped yolk–shell structural nano functional materials for catalyst, sensors, energy storage and other new applications. - Graphical abstract: A facile generic strategy is employed to prepare Ti{sup 3+} self-doped yolk–shell structure titanium oxide nanoparticle aggregates with the superior photocatalytic activity under visible light. - Highlights: • Yolk–shell TiO{sub 2} mesospheres are synthesized by solvothermal alcoholysis. • Ti{sup 3+} self-doped yolk–shell structure titanium oxide is obtained at low temperature. • It exhibits a remarkable photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HFTS-1 (Final Report)

Despite the long history of hydraulic fracturing, the optimal number of fracturing stages during multi-stage fracture stimulation in horizontal wells can be a complex subject. In addition to the increased expense of multistage fracturing in horizontal wells, increasing the number of fracturing stages does not always correlate with a commensurate increase in production. The problem is the application of a uniform fracture stimulation design to all stages with no consideration for geological variations along the wellbore. The result is an inefficient use and costly waste of energy and water. Optimization of the fracturing process requires an understanding of the cause-and-effect relationship between fracturing parameters and local geological properties at a given location along the wellbore. Realizing that the generalized rock mechanics theories and hypotheses are not truly applicable to fractured and laminated shales, quantifiable impacts of a shale’s geomechanical and depositional features are a prerequisite for design and implementation of optimized hydraulic fractures. The overarching goal of this project is to understand and define the relationships of shale geology and fracture dynamics using detailed field data that includes coring of the fracture domain. Finally, resource recovery from shale formations is estimated to be less than fifteen percent. Research proposed in this project will establish the foundations for investigating enhanced recovery techniques for increased resource recovery in existing fracture treated wells. Natural gas as an EOR fluid is in the initial stages of being used broadly in the oil and gas industry and as such, many aspects of the process need to be researched and addressed prior to widespread acceptance. In addition, re-fracturing techniques, particularly using cemented liners also need to be further investigated. This project explores several of these EOR techniques in greater detail, not just at the theoretical level, but through actual field test sites. This report delves into the research program, identified tasks, several studies, observations, results, and conclusions under the Hydraulic Fracturing Test Site (HFTS) project. This test project is subdivided into three distinct phases and each phase is discussed in detail under separate sections. The original test site for Phase 1 as well as the Phase 2 site are in Midland Basin in Texas and operated by Laredo Petroleum. In the first two phases, the program targeted the Wolfcamp formation in Midland Basin. Phase 3 of the study targeted the EagleFord play in South Texas with Devon Energy as the operator. Significant conclusions from this study include: 1) lateral and vertical fracture growth mapping as well as proppant transport behavior, 2) Use of field gas and its applicability for huff n puff EOR injection in the Midland Basin, 3) Development and validation of proppant log, both at core scale as well as in-fill well implementation by analyzing drilling mud return samples, 4) Applicability of liner refracturing including best practices for enhanced unit level productivity. This report will detail all these studies as well as technical results and conclusions from said studies. These include general subsurface characterization work, completion designs as implemented, studies looking at fracture geometry, high resolution microseismic study, advanced crosswell strain mapping studies including drainage characterization, core characterization results, proppant analysis (core and observation wells), geochemistry, etc. to name a few.

02 PETROLEUM↗