Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “convergence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Evaluating convective parameterization closures using cloud‐resolving model simulation of tropical deep convection

Abstract Closure is an important component of a mass flux‐based convective parameterization scheme, and it determines the amount of convection with the aid of a large‐scale variable (closure variable) that is sensitive to convection. In this study, we have evaluated and quantified the relationship between commonly used closure variables and convection for a range of global climate model (GCM) horizontal resolutions, taking convective precipitation and mass flux at 600 hPa as measures for deep convection. We have used cloud‐resolving model simulation data to create domain averages representing GCM horizontal resolutions of 128 km, 64 km, 32 km, 16 km, 8 km, and 4 km. Lead‐lag correlation analysis shows that except moisture convergence and turbulent kinetic energy, none of the other closure variables evaluated in this study show any relationship with convection for the six subdomain sizes. It is found that the correlation between moisture convergence and convective precipitation is largest when moisture convergence leads convection. This correlation weakens as the subdomain size decreases to 8 km or smaller. Although convective precipitation and mass flux increase with moisture convergence at a given subdomain size, as the subdomain size increases, the rate at which they increase becomes smaller. This suggests that moisture convergence‐based closure should scale down the predicted mass flux for a given moisture convergence as GCM resolution increases.

Suhas, E.↗

Spectral methods in the presence of discontinuities

Spectral methods provide an elegant and efficient way of numerically solving differential equations of all kinds. For smooth problems, truncation error for spectral methods vanishes exponentially in the infinity norm and L 2 -norm. However, for non-smooth problems, convergence is significantly worse—the L 2 -norm of the error for a discontinuous problem will converge at a sub-linear rate and the infinity norm will not converge at all. We explore and improve upon a post-processing technique—optimally convergent mollifiers—to recover exponential convergence from a poorly-converging spectral reconstruction of non-smooth data. Furthermore this is an important first step towards using these techniques for simulations of realistic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quick-and-Easy Validation of Protein–Ligand Binding Models Using Fragment-Based Semiempirical Quantum Chemistry

Electronic structure calculations in enzymes converge very slowly with respect to the size of the model region that is described using quantum mechanics (QM), requiring hundreds of atoms to obtain converged results and exhibiting substantial sensitivity (at least in smaller models) to which amino acids are included in the QM region. As such, there is considerable interest in developing automated procedures to construct a QM model region based on well-defined criteria. However, testing such procedures is burdensome due to the cost of large-scale electronic structure calculations. Here, we show that semiempirical methods can be used as alternatives to density functional theory (DFT) to assess convergence in sequences of models generated by various automated protocols. The cost of these convergence tests is reduced even further by means of a many-body expansion. We use this approach to examine convergence (with respect to model size) of protein–ligand binding energies. Fragment-based semiempirical calculations afford well-converged interaction energies in a tiny fraction of the cost required for DFT calculations. Two-body interactions between the ligand and single-residue amino acid fragments afford a low-cost way to construct a “QM-informed” enzyme model of reduced size, furnishing an automatable active-site model-building procedure. This provides a streamlined, user-friendly approach for constructing ligand binding-site models that needs neither a priori information nor manual adjustments. Extension to model-building for thermochemical calculations should be straightforward.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Car–Parrinello Monitor for More Robust Born–Oppenheimer Molecular Dynamics

Born–Oppenheimer molecular dynamics (BOMD) is a promising simulation method for exploring the possible reaction pathways of a chemical system, but one significant challenge is the increased difficulty of converging the self-consistent field (SCF) calculation that often accompanies the breaking and forming of chemical bonds. To address this challenge, we developed an enhancement to the BOMD simulation method called the Car–Parrinello monitor (CPMonitor) that uses Car–Parrinello molecular dynamics (CPMD) to recover from SCF convergence failures. CPMonitor works by detecting SCF convergence failures in BOMD and switching to a CPMD Hamiltonian to propagate through the region of configuration space where the SCF calculation is unable to converge, then switching back to BOMD when good convergence behavior is re-established. We present a series of simulation studies that use CPMonitor, including detailed studies of the thermodynamic and dynamical properties of simple systems, as well as ab initio nanoreactor simulations containing transition metal atoms that were previously not possible to simulate using standard BOMD methods. Our studies show that CPMonitor can make BOMD simulations robust to SCF convergence difficulties and improve simulation performance and stability in reaction discovery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Finite-size correction for slab supercell calculations of materials with spontaneous polarization

Abstract The repeated slab approach has become a de facto standard to accurately describe surface properties of materials by density functional theory calculations with periodic boundary conditions. For materials exhibiting spontaneous polarization, we show that the conventional scheme of passivation with pseudo hydrogen is unable to realize a charge-neutral surface. The presence of a net surface charge induces via Gauss’s law a macroscopic electric field through the slab and results in poor size convergence with respect to the thickness of the slab. We propose a modified passivation method that accounts for the effect of spontaneous polarization, describes the correct bulk limits and boosts convergence with respect to slab thickness. The robustness, reliability, and superior convergence of energetics and electronic structure achieved by the proposed method are demonstrated using the example of polar ZnO surfaces.

Chemistry↗

An asymptotically compatible approach for Neumann-type boundary condition on nonlocal problems

In this paper we consider 2D nonlocal diffusion models with a finite nonlocal horizon parameter δ characterizing the range of nonlocal interactions, and consider the treatment of Neumann-like boundary conditions that have proven challenging for discretizations of nonlocal models. We propose a new generalization of classical local Neumann conditions by converting the local flux to a correction term in the nonlocal model, which provides an estimate for the nonlocal interactions of each point with points outside the domain. While existing 2D nonlocal flux boundary conditions have been shown to exhibit at most first order convergence to the local counter part as δ → 0, the proposed Neumann-type boundary formulation recovers the local case as O(δ 2 ) in the L∞(Ω) norm, which is optimal considering the O(δ 2 ) convergence of the nonlocal equation to its local limit away from the boundary. We analyze the application of this new boundary treatment to the nonlocal diffusion problem, and present conditions under which the solution of the nonlocal boundary value problem converges to the solution of the corresponding local Neumann problem as the horizon is reduced. To demonstrate the applicability of this nonlocal flux boundary condition to more complicated scenarios, we extend the approach to less regular domains, numerically verifying that we preserve second-order convergence for non-convex domains with corners. Finally, based on the new formulation for nonlocal boundary condition, we develop an asymptotically compatible meshfree discretization, obtaining a solution to the nonlocal diffusion equation with mixed boundary conditions that converges with O(δ 2 ) convergence.

97 MATHEMATICS AND COMPUTING↗

Alternative hot spot formation techniques using liquid deuterium-tritium layer inertial confinement fusion capsules

The baseline DT ice layer inertial confinement fusion (ICF) ignition capsule design requires a hot spot convergence ratio of ~34 with a hot spot that is formed from DT mass originally residing in a very thin layer at the inner DT ice surface. In the present paper, we propose alternative ICF capsule designs in which the hot spot is formed mostly or entirely from mass originating within a spherical volume of DT vapor. Simulations of the implosion and hot spot formation in two DT liquid layer ICF capsule concepts—the DT wetted hydrocarbon (CH) foam concept and the “fast formed liquid” (FFL) concept—are described and compared to simulations of standard DT ice layer capsules. 1D simulations are used to compare the drive requirements, the optimal shock timing, the radial dependence of hot spot specific energy gain, and the hot spot convergence ratio in low vapor pressure (DT ice) and high vapor pressure (DT liquid) capsules. 2D simulations are used to compare the relative sensitivities to low-mode x-ray flux asymmetries in the DT ice and DT liquid capsules. It is found that the overall thermonuclear yields predicted for DT liquid layer capsules are less than yields predicted for DT ice layer capsules in simulations using comparable capsule size and absorbed energy. However, the wetted foam and FFL designs allow for flexibility in hot spot convergence ratio through the adjustment of the initial cryogenic capsule temperature and, hence, DT vapor density, with a potentially improved robustness to low-mode x-ray flux asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predictions of Transient Flame Lift-Off Length With Comparison to Single-Cylinder Optical Engine Experiments

A state-of-the-art, grid-convergent simulation methodology was applied to three-dimensional calculations of a single-cylinder optical engine. A mesh resolution study on a sector-based version of the engine geometry further verified the RANS-based cell size recommendations previously presented by Senecal et al. (“Grid Convergent Spray Models for Internal Combustion Engine CFD Simulations,” ASME Paper No. ICEF2012-92043). Convergence of cylinder pressure, flame lift-off length, and emissions was achieved for an adaptive mesh refinement cell size of 0.35 mm. Furthermore, full geometry simulations, using mesh settings derived from the grid convergence study, resulted in excellent agreement with measurements of cylinder pressure, heat release rate, and NOx emissions. On the other hand, the full geometry simulations indicated that the flame lift-off length is not converged at 0.35 mm for jets not aligned with the computational mesh. Further simulations suggested that the flame lift-off lengths for both the nonaligned and aligned jets appear to be converged at 0.175 mm. With this increased mesh resolution, both the trends and magnitudes in flame lift-off length were well predicted with the current simulation methodology. Good agreement between the overall predicted flame behavior and the available chemiluminescence measurements was also achieved. Our present study indicates that cell size requirements for accurate prediction of full geometry flame lift-off lengths may be stricter than those for global combustion behavior. This may be important when accurate soot predictions are required.

42 ENGINEERING↗

A Structured Quasi-Newton Algorithm for Optimizing with Incomplete Hessian Information

We present a structured quasi-Newton algorithm for unconstrained optimization problems that have unavailable second-order derivatives or Hessian terms. We provide a formal derivation of the well-known Broyden--Fletcher--Goldfarb--Shanno (BFGS) secant update formula that approximates only the missing Hessian terms, and we propose a linesearch quasi-Newton algorithm based on a modification of Wolfe conditions that converges to first-order optimality conditions. We also analyze the local convergence properties of the structured BFGS algorithm and show that it achieves superlinear convergence under the standard assumptions used by quasi-Newton methods using secant updates. In conclusion, we provide a thorough study of the practical performance of the algorithm on the CUTEr suite of test problems and show that our structured BFGS-based quasi-Newton algorithm outperforms the unstructured counterpart(s).

97 MATHEMATICS AND COMPUTING↗

A Block-Asynchronous Relaxation Method for Graphics Processing Units

In this paper, we analyze the potential of asynchronous relaxation methods on Graphics Processing Units (GPUs). For this purpose, we developed a set of asynchronous iteration algorithms in CUDA and compared them with a parallel implementation of synchronous relaxation methods on CPU-based systems. For a set of test matrices taken from the University of Florida Matrix Collection we monitor the convergence behavior, the average iteration time and the total time-to-solution time. Analyzing the results, we observe that even for our most basic asynchronous relaxation scheme, despite its lower convergence rate compared to the Gauss-Seidel relaxation (that we expected), the asynchronous iteration running on GPUs is still able to provide solution approximations of certain accuracy in considerably shorter time then Gauss- Seidel running on CPUs. Hence, it overcompensates for the slower convergence by exploiting the scalability and the good fit of the asynchronous schemes for the highly parallel GPU architectures. Further, enhancing the most basic asynchronous approach with hybrid schemes – using multiple iterations within the ”subdomain” handled by a GPU thread block and Jacobi-like asynchronous updates across the ”boundaries”, subject to tuning various parameters – we manage to not only recover the loss of global convergence but often accelerate convergence of up to two times (compared to the effective but difficult to parallelize Gauss-Seidel type of schemes), while keeping the execution time of a global iteration practically the same. This shows the high potential of the asynchronous methods not only as a stand alone numerical solver for linear systems of equations fulfilling certain convergence conditions but more importantly as a smoother in multigrid methods. Due to the explosion of parallelism in todays architecture designs, the significance and the need for asynchronous methods, as the ones described in this work, is expected to grow.

97 MATHEMATICS AND COMPUTING↗

Maximizing 1D “like” implosion performance for inertial confinement fusion science

While the march towards achieving indirectly driven inertial confinement fusion at the NIF has made great progress, the experiments show that multi-dimensional effects still dominate the implosion performance. Low mode implosion symmetry and hydrodynamic instabilities seed by capsule mounting features appear to be two key limiting factors for implosion performance. One reason these factors have a large impact on the performance of ICF implosions is the high convergence required to achieve high fusion gains. To tackle these problems, a predictable implosion platform is needed meaning experiments must trade-off high gain for performance. To this end, LANL has adopted three main approaches to develop a 1D implosion platform where 1D means high yield over 1D clean calculations. Taking advantage of the properties of beryllium capsules, a high adiabat, low convergence platform is being developed. The higher drive efficiency for beryllium enables larger case-to-capsule ratios to improve symmetry at the expense of drive. Smaller capsules with a high adiabat drive are expected to reduce the convergence and thus increase predictability. The second approach is liquid fuel layers using wetted foam targets. With liquid fuel layers, the initial mass in the hot spot can be controlled via the target fielding temperature which changes the liquid vapor pressure. Varying the initial hot spot mass via the vapor pressure controls the implosion convergence and minimizes the need to vaporize the dense fuel layer during the implosion to achieve ignition relevant hot spot densities. The last method is double shell targets. Unlike hot spot ignition, double shells ignite volumetrically. The inner shell houses the DT fuel and the convergence of this cavity is relatively small compared to hot spot ignition. Radiation trapping and the longer confinement times relax the conditions required to ignite the fuel. Key challenges for double shell targets are coupling the momentum of the outer shell to the inner shell and mixing of the mid-Z material from the inner shell into the fuel. The primary theme for each of these approaches is reduced implosion convergence with the goal of achieving a 1D “like” implosion. Once established, a systematic approach to solving limiting issues for ICF can be undertaken. This presentation will discuss the approaches, results, and plans for each of these campaigns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Orthotropic fracture using a singular isoparametric element

The six noded quarter point natural isoparametric triangular element is employed to obtain displacement and stress distributions in the vicinity of the crack tip in a center cracked tensile coupon of unidirectional graphite epoxy. The material is considered to be homogeneous, elastic and orthotropic. The finite element results are compared to the analytical solution of anisotropic elasticity. Convergence as a function of mesh parameters is studied for isotropic and orthotropic materials. It is shown that displacements converge faster than stresses and that meshes which are convergent for isotropic and orthotropic materials. It is shown that displacements converge faster than stresses and that meshes which are convergent for isotropic materials are not completely convergent for the highly orthotropic graphite epoxy.

Gregory, M. A.↗

Short-term forecasting of lightning based on the surface wind field at Kennedy Space Center

Cloud-to-ground lightning is related in time and space to surface convergence for 244 days during the summer over a 790 sqkm network. The method uses surface convergence, particularly the average over the area, to identify the potential for new, local thunderstorm growth, and can be used to specify the likely time and location of lightning during the life cycle of the convection. A threshold of 0.0000075/sec change in divergence is used to define a convergence event, and a separation of 30 min between flashes defines a lightning event. Time intervals are found to be on the order of 1 hr from beginning convergence to first flash, and (CH110) 2 hr from beginning convergence to the end of lightning. Major differences between the convergence-lightning relationships based on low-level mean onshore and offshore flow are noted.

Watson, Andrew I.↗

Strain accumulation in the Santa Barbara Channel, 1971-1987

Geophysical evidence suggests a significant amount of north-south convergence occurs across the Santa Barbara Channel. Tectonic studies indicate a discrepancy between observed fault slip in California and the North American-Pacific plate motion. Newer plate motion models (NUVEL-1) yield a lower rate of convergence. Global Positioning System (GPS) data collected in the Santa Barbara Channel in 1987, when combined with 1971 trilateration measurements, should be sufficient to resolve the present-day convergence rate. In early 1987. from January 3 to 7, GPS data were collected at 14 sites in California and at 5 additional stations throughout North America. The data can be used to estimate the rate of crustal deformation (convergence) ocurring across the Santa Barbara Channel. The GPS baselines were computed with the Bernese 2nd generation software. A comparison was made between baseline lengths obtained with the Burnese and MIT softwares. Baseline changes from 1971 to January, 1987 (GPS-Bernese) across the Santa Barbara Channel were computed. A uniform strain model was calculated from the baseline changes. The present-day rate of convergence across the Santa Barbara Channel was determined to be 8 to 10 mm/yr. This conclusion is obtained from changes in the baseline length measured with a 1971 trilateration survey and a January, 1987, GPS survey. The rapid convergence rate, in addition to the history of large seismic events, suggests this region is a prime target for future geodetic and geophysical studies.

Larsen, Shawn↗

Frequency domain FIR and IIR adaptive filters

A discussion of the LMS adaptive filter relating to its convergence characteristics and the problems associated with disparate eigenvalues is presented. This is used to introduce the concept of proportional convergence. An approach is used to analyze the convergence characteristics of block frequency-domain adaptive filters. This leads to a development showing how the frequency-domain FIR adaptive filter is easily modified to provide proportional convergence. These ideas are extended to a block frequency-domain IIR adaptive filter and the idea of proportional convergence is applied. Experimental results illustrating proportional convergence in both FIR and IIR frequency-domain block adaptive filters is presented.

Lynn, D. W.↗

Finite-field Calculations of Molecular Polarizabilities Using Field-Induced Polarization Functions: Second- and Third-order Perturbation Correlation Corrections to the Coupled Hartree-Fock Polarizability of H2O

Ordinary Rayleigh-Schroudinger perturbation theory with Moller-Plesset (RSMP) partitioning is used to calculate second- and third-order correlation corrections to the CHF polarizability and dipole moment of the water molecule by a finite-field procedure. Pade approximants are found to be useful in accelerating the convergence of the property perturbation expansions. Field-induced polarization functions suitable for polarizability calculations are determined. The average polarizability calculated, neglecting vibrational averaging, with Dunning's (9s5p/4s-4s2p/2s) contracted GTO basis set augmented by field-induced lslp2d/lp polarization functions is within 3 per cent of the experimental result. Correlation corrections to the dipole moment and polarizability of the water molecule calculated by the finite-field RSMP and single + double excitation CI(SDCI) methods for the same basis set are found to be in close agreement. The RSMP approach has the advantages of being size-consistent and of being capable of greater efficiency than the SCDI method. Comparative calculations carried out using Epstein-Nesbet partitioning show that through third order RSEN correlation perturbation expansions for the dipole moment and polarizability are less rapidly convergent than RSMP expansions. However, reasonable accord with RSMP results can be achieved by using Pade approximants to accelerate the convergence of RSEN energy perturbation expansions. The convergence of RSMP property correlation expansions based on the zeroth-order uncoupled-Hartree-Fock (UCHF) and coupled-Hartree-Fock (CHF) approximations are compared through third order. Whereas the CHF + RSMP expansions are for practical purposes fully converged, the UCHF + RSMP expansions are not adequately converged.

Langhoff, S. R.↗

The Principle of Energetic Consistency: Application to the Shallow-Water Equations

If the complete state of the earth's atmosphere (e.g., pressure, temperature, winds and humidity, everywhere throughout the atmosphere) were known at any particular initial time, then solving the equations that govern the dynamical behavior of the atmosphere would give the complete state at all subsequent times. Part of the difficulty of weather prediction is that the governing equations can only be solved approximately, which is what weather prediction models do. But weather forecasts would still be far from perfect even if the equations could be solved exactly, because the atmospheric state is not and cannot be known completely at any initial forecast time. Rather, the initial state for a weather forecast can only be estimated from incomplete observations taken near the initial time, through a process known as data assimilation. Weather prediction models carry out their computations on a grid of points covering the earth's atmosphere. The formulation of these models is guided by a mathematical convergence theory which guarantees that, given the exact initial state, the model solution approaches the exact solution of the governing equations as the computational grid is made more fine. For the data assimilation process, however, there does not yet exist a convergence theory. This book chapter represents an effort to begin establishing a convergence theory for data assimilation methods. The main result, which is called the principle of energetic consistency, provides a necessary condition that a convergent method must satisfy. Current methods violate this principle, as shown in earlier work of the author, and therefore are not convergent. The principle is illustrated by showing how to apply it as a simple test of convergence for proposed methods.

Cohn, Stephen E.↗