Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “concentration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Effect of CO 2 Concentration on the Microbial Activity of Orenia metallireducens (Strain Z6) in Surface Inert Materials

Carbon dioxide (CO 2 ) sequestration has garnered widespread attention as a key strategy for mitigating CO 2 emissions and combating the greenhouse effect. However, the mechanisms underlying the interactions between CO 2 , widespread siliceous minerals and biological processes remain unclear. The present study explored the potential impacts of different CO 2 concentrations on microbial activity, environmental conditions and their feedback on the fate of CO 2 . A total of 20 experimental conditions was created, with the variables including different natural and synthetic siliceous minerals (e.g., quartz sand and a type of commercial glass beads), the presence or absence of the iron-reducing microorganism Orenia metallireducens (strain Z6) and varying CO 2 concentrations (0%, 20%, 50%, 100%) in the presence of ferrihydrite and pyruvate. Geochemical, microbial and mineralogical analyses revealed that elevated CO 2 concentrations significantly inhibited microbial Fe(III) reduction and pyruvate metabolism. Interestingly, compared to cultures without mineral amendments or those with glass beads alone, the addition of quartz sand enabled strain Z6 to better withstand the environmental stress caused by elevated CO 2 , promoting pyruvate fermentation and iron reduction. In addition to an increased pH, the formation of siderite, hematite and vivianite was also observed in the bioactive systems. Although both glass beads and quartz sand were primarily composed of silica, differences in the mineral structure, elemental composition and acid neutralization capacity rendered quartz sand more chemically active and unexpectedly led to greater CO 2 sequestration.

CO2 stress↗

Elevated Ozone Concentration Reduces Photosynthetic Carbon Gain but Does Not Alter Leaf Structural Traits, Nutrient Composition or Biomass in Switchgrass

Elevated tropospheric ozone concentration (O3) increases oxidative stress in vegetation and threatens the stability of crop production. Current O3 pollution in the United States is estimated to decrease the yields of maize (Zea mays) up to 10%, however, many bioenergy feedstocks including switchgrass (Panicum virgatum) have not been studied for response to O3 stress. Using Free Air Concentration Enrichment (FACE) technology, we investigated the impacts of elevated O3 (~100 nmol mol−1) on leaf photosynthetic traits and capacity, chlorophyll fluorescence, the Ball–Woodrow–Berry (BWB) relationship, respiration, leaf structure, biomass and nutrient composition of switchgrass. Elevated O3 concentration reduced net CO2 assimilation rate (A), stomatal conductance (gs), and maximum CO2 saturated photosynthetic capacity (Vmax), but did not affect other functional and structural traits in switchgrass or the macro- (except potassium) and micronutrient content of leaves. These results suggest that switchgrass exhibits a greater O3 tolerance than maize, and provide important fundamental data for evaluating the yield stability of a bioenergy feedstock crop and for exploring O3 sensitivity among bioenergy feedstocks.

59 BASIC BIOLOGICAL SCIENCES↗

High-Resolution PM2.5 Concentrations Estimation Based on Stacked Ensemble Learning Model Using Multi-Source Satellite TOA Data

Nepal has experienced severe fine particulate matter (PM2.5) pollution in recent years. However, few studies have focused on the distribution of PM2.5 and its variations in Nepal. Although many researchers have developed PM2.5 estimation models, these models have mainly focused on the kilometer scale, which cannot provide accurate spatial distribution of PM2.5 pollution. Based on Gaofen-1/6 and Landsat-8/9 satellite data, we developed a stacked ensemble learning model (named XGBLL) combined with meteorological data, ground PM2.5 concentrations, ground elevation, and population data. The model includes two layers: a XGBoost and Light GBM model in the first layer, and a linear regression model in the second layer. The accuracy of XGBLL model is better than that of a single model, and the fusion of multi-source satellite remote sensing data effectively improves the spatial coverage of PM2.5 concentrations. Besides, the spatial distribution of the daily mean PM2.5 concentrations in the Kathmandu region under different air conditions was analyzed. The validation results showed that the monthly averaged dataset was accurate (R2 = 0.80 and root mean square error = 7.07). In addition, compared to previous satellite PM2.5 datasets in Nepal, the dataset produced in this study achieved superior accuracy and spatial resolution.

Environmental Sciences & Ecology↗

Spatial-Temporal Analysis of PM 2.5 and NO 2 Concentrations Collected Using Low-Cost Sensors in Peñuelas, Puerto Rico

The U.S. Environmental Protection Agency (EPA) is involved in the discovery, evaluation, and application of low-cost air quality (AQ) sensors to support citizen scientists by directly engaging with them in the pursuit of community-based interests. The emergence of low-cost (<$2500) sensors have allowed a wide range of stakeholders to better understand local AQ conditions. Here we present results from the deployment of the EPA developed Citizen Science Air Monitor (CSAM) used to conduct approximately five months (October 2016–February 2017) of intensive AQ monitoring in an area of Puerto Rico (Tallaboa-Encarnación, Peñuelas) with little historical data on pollutant spatial variability. The CSAMs were constructed by combining low-cost particulate matter size fraction 2.5 micron (PM 2.5 ) and nitrogen dioxide (NO 2 ) sensors and distributed across eight locations with four collocated weather stations to measure local meteorological parameters. During this deployment 1 h average concentrations of PM 2.5 and NO 2 ranged between 0.3 to 33.6 µg/m 3 and 1.3 to 50.6 ppb, respectively. Peak concentrations were observed for both PM 2.5 and NO 2 when conditions were dominated by coastal-originated winds. These results advanced the community’s understanding of pollutant concentrations and trends while improving our understanding of the limitations and necessary procedures to properly interpret measurements produced by low-cost sensors.

54 ENVIRONMENTAL SCIENCES↗

Modeling Monthly Nitrate Concentration in a Karst Spring with and without Discrete Conduit Flow

Understanding the coupled continuum pipe-flow framework for modeling contaminant transport in karst systems is critical for protecting water resources therein. This study simulated point and non-point source nitrate concentration in a karst spring and investigated the results generated from the flow and transport model with and without discrete conduit flow. CFPv2 and CMT3D models were integrated to address the changes in nitrate concentration at a monthly scale in a karst spring, and the results were compared with that from an equivalent porous media (EPM) model with high-hydraulic conductivity (K) zones set in the main karstified area to represent conduits. The results show that the CFPv2+CMT3D model is able to describe well the recession of nitrate concentration in spring discharge, and the relatively larger deviation (slower nitrate recession) from the observed trend for the EPM model is probably a result of the limitation of utilizing high hydraulic conductivity cells to represent conduit. Moreover, simulated hydraulic heads in poorly karstified areas from the two models both show slight differences from the observations (the head RMSE values of calibration/validation for CFPv2 and MODFLOW models are 0.16 m/0.25 m and 0.26 m/0.17 m, respectively), indicating the inclusion of conduits may not affect the simulation considerably, and the lower the proportion of karstic area, the slight effects brought from the inclusion of conduits in the model. For highly karstified areas, the CFPv2+CMT3D model could provide more accurate results (head RMSE of calibration/validation for CFPv2 and MODFLOW are 0.22 m/0.06 and 0.52 m/0.47 m, respectively), showing the coupled continuum pipe-flow framework may be more appropriate for applying to highly and maturely karstified areas where the variations in the behavior of flow and contaminant transport are more affected by turbulent flow regime.

54 ENVIRONMENTAL SCIENCES↗

Uptake, Efflux, and Sequestration of Mercury in the Asian Clam, Corbicula fluminea , at Environmentally Relevant Concentrations, and the Implications for Mercury Remediation

(1) Mercury (Hg) is a persistent, ubiquitous contaminant that readily biomagnifies into higher trophic level species in aquatic environments across the globe. It is crucial to understand the movement of environmentally relevant concentrations of Hg in impacted freshwater streams to minimize risks to ecological and human health. (2) The bioconcentration kinetics of aqueous Hg exposure (20, 100, and 200 ng/L) in the invasive Asian Clam, Corbicula fluminea, were measured. A toxicokinetic model, the first parameterized for Hg accumulation in freshwater clams, was developed to estimate uptake and efflux parameters and compared to previous parameter values estimated for other mollusk species. (3) Results demonstrated that even at low Hg concentrations, Corbicula record signals of contamination through bioconcentration, and both direct measurement and toxicokinetic models demonstrate large Hg bioconcentration factors (as high as 1.34 × 10 5 mL/g dry tissue), similar to partitioning coefficients seen in engineered Hg sorbents. (4) Our study found that Corbicula accumulated Hg at aqueous concentrations relevant to impacted streams, but well below regulatory drinking water limits, demonstrating their utility as a sensitive sentinel species and potential bioremediator.

bioaccumulation↗

The concentration dependence of the galaxy–halo connection: Modeling assembly bias with abundance matching

Empirical methods for connecting galaxies to their dark matter halos have become essential for interpreting measurements of the spatial statistics of galaxies. In this work, we present a novel approach for parameterizing the degree of concentration dependence in the abundance matching method. Furthermore, this new parameterization provides a smooth interpolation between two commonly used matching proxies: the peak halo mass and the peak halo maximal circular velocity. This parameterization controls the amount of dependence of galaxy luminosity on halo concentration at a fixed halo mass. Effectively this interpolation scheme enables abundance matching models to have adjustable assembly bias in the resulting galaxy catalogs. With the new $400\,\mathrm{Mpc}\,{h}^{-1}$ DarkSky Simulation, whose larger volume provides lower sample variance, we further show that low-redshift two-point clustering and satellite fraction measurements from SDSS can already provide a joint constraint on this concentration dependence and the scatter within the abundance matching framework.

79 ASTRONOMY AND ASTROPHYSICS↗

High summertime aerosol organic functional group concentrations from marine and seabird sources at Ross Island, Antarctica, during AWARE

Observations of the organic components of the natural aerosol are scarce in Antarctica, which limits our understanding of natural aerosols and their connection to seasonal and spatial patterns of cloud albedo in the region. From November 2015 to December 2016, the ARM West Antarctic Radiation Experiment (AWARE) measured submicron aerosol properties near McMurdo Station at the southern tip of Ross Island. Submicron organic mass (OM), particle number, and cloud condensation nuclei concentrations were higher in summer than other seasons. The measurements included a range of compositions and concentrations that likely reflected both local anthropogenic emissions and natural background sources. We isolated the natural organic components by separating a natural factor and a local combustion factor. The natural OM was 150 times higher in summer than in winter. The local anthropogenic emissions were not hygroscopic and had little contribution to the CCN concentrations. Natural sources that included marine sea spray and seabird emissions contributed 56 % OM in summer but only 3 % in winter. The natural OM had high hydroxyl group fraction (55 %), 6 % alkane, and 6 % amine group mass, consistent with marine organic composition. In addition, the Fourier transform infrared (FTIR) spectra showed the natural sources of organic aerosol were characterized by amide group absorption, which may be from seabird populations. Carboxylic acid group contributions were high in summer and associated with natural sources, likely forming by secondary reactions.

54 ENVIRONMENTAL SCIENCES↗

Identifying a regional aerosol baseline in the eastern North Atlantic using collocated measurements and a mathematical algorithm to mask high-submicron-number-concentration aerosol events

Abstract. High-time-resolution measurements of in situ aerosol and cloud properties provide the ability to study regional atmospheric processes that occur on timescales of minutes to hours. However, one limitation to this approach is that continuous measurements often include periods when the data collected are not representative of the regional aerosol. Even at remote locations, submicron aerosols are pervasive in the ambient atmosphere with many sources. Therefore, periods dominated by local aerosol should be identified before conducting subsequent analyses to understand aerosol regional processes and aerosol–cloud interactions. Here, we present a novel method to validate the identification of regional baseline aerosol data by applying a mathematical algorithm to the data collected at the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility in the eastern North Atlantic (ENA). The ENA central facility (C1) includes an aerosol observing system (AOS) for the measurement of aerosol physical, optical, and chemical properties at time resolutions from seconds to minutes. A second temporary supplementary facility (S1), located ∼0.75 km from C1, was deployed for ∼1 year during the Aerosol and Cloud Experiments (ACE-ENA) campaign in 2017. First, we investigate the local aerosol at both locations. We associate periods of high submicron number concentration (Ntot) in the fine-mode condensation particle counter (CPC) and size distributions from the Ultra-High Sensitivity Aerosol Spectrometer (UHSAS) as a function of wind direction using a meteorology sensor with local sources. Elevated concentrations of Aitken-mode (< 100 nm diameter) particles were observed in correspondence with the wind directions associated with airport operations. At ENA, the Graciosa Airport and its associated activities were found to be the main sources of high-concentration aerosol events at ENA, causing peaks in 1 min Ntot that exceeded 8000 and 10 000 cm−3 at C1, in summer and winter, respectively, and 5000 cm−3 at S1 in summer. Periods with high Ntot not associated with these wind directions were also observed. As a result, the diverse local sources at ENA yielded a poor relationship between Ntot measurements collected at C1 and S1 (R2=0.03 with a slope =0.05±0.001). As a first approach to mask these events, the time periods when the wind direction was associated with the airport operations (west to northwest and southeast to south at C1 and east to south at S1) were applied. The meteorological masks removed 38.9 % of the data at C1 and 43.4 % at S1, and they did not significantly improve the relationship between the two sites (R2=0.18 with a slope =0.06±0.001). Due to the complexity of high-Ntot events observed at ENA, we develop and validate a mathematical ENA Aerosol Mask (ENA-AM) to identify high-Ntot events using 1 min resolution data from the AOS CPC at C1 and S1. After its parameterization and application, ENA-AM generated a high correlation between Ntot in the summer at C1 and S1 (R2=0.87 with a slope =0.84±0.001). We identified the regional baseline at ENA to be 428±228 cm−3 in the summer and 346±223 cm−3 in the winter. Lastly, we compared masked measurements from the AOS with the ARM Aerial Facility (AAF) during flights over C1 in the summer to understand submicron aerosol vertical mixing over C1. The high correlation (R2=0.71 with a slope of 1.04±0.01) observed between C1 and the AAF Ntot collected within an area of 10 km surrounding ENA and at altitudes < 500 m indicated that the submicron aerosol at ENA was well mixed within the first 500 m of the marine boundary layer during the month of July during ACE-ENA. Our novel method for determining a regional aerosol baseline at ENA can be applied to other time periods and at other locations with validation by a secondary site or additional collocated measurements.

54 ENVIRONMENTAL SCIENCES↗

Effects of aerosol organics on cloud condensation nucleus (CCN) concentration and first indirect aerosol effect

Abstract. Aerosol microphysics, chemical composition, and CCN properties were measured on the Department of Energy Gulfstream-1 aircraft during the Marine Stratus/ Stratocumulus Experiment (MASE) conducted over the coastal waters between Point Reyes National Seashore and Monterey Bay, California, in July 2005. Aerosols measured during MASE included free tropospheric aerosols, marine boundary layer aerosols, and aerosols with high organic concentration within a thin layer above the cloud. Closure analysis was carried out for all three types of aerosols by comparing the measured CCN concentrations at 0.2% supersaturation to those predicted based on size distribution and chemical composition using K¨ohler theory. The effect of aerosol organic species on predicted CCN concentration was examined using a single hygroscopicity parameterization.

54 ENVIRONMENTAL SCIENCES↗

Aerosol concentration and size distribution measured below, in, and above cloud from the DOE G-1 during VOCALS-REx

During the VOCALS Regional Experiment, the DOE G-1 aircraft was used to sample a varying aerosol environment pertinent to properties of stratocumulus clouds over a longitude band extending 800 km west from the Chilean coast at Arica. Trace gas and aerosol measurements are presented as a function of longitude, altitude, and dew point in this study. Spatial distributions are consistent with an upper atmospheric source for O{sub 3} and South American coastal sources for marine boundary layer (MBL) CO and aerosol, most of which is acidic sulfate in agreement with the dominant pollution source being SO{sub 2} from Cu smelters and power plants. Pollutant layers in the free troposphere (FT) can be a result of emissions to the north in Peru or long range transport from the west. At a given altitude in the FT (up to 3 km), dew point varies by 40 C with dry air descending from the upper atmospheric and moist air having a BL contribution. Ascent of BL air to a cold high altitude results in the condensation and precipitation removal of all but a few percent of BL water along with aerosol that served as CCN. Thus, aerosol volume decreases with dew point in the FT. Aerosol size spectra have a bimodal structure in the MBL and an intermediate diameter unimodal distribution in the FT. Comparing cloud droplet number concentration (CDNC) and pre-cloud aerosol (Dp > 100 nm) gives a linear relation up to a number concentration of {approx}150 cm{sup -3}, followed by a less than proportional increase in CDNC at higher aerosol number concentration. A number balance between below cloud aerosol and cloud droplets indicates that {approx}25% of aerosol in the PCASP size range are interstitial (not activated). One hundred and two constant altitude cloud transects were identified and used to determine properties of interstitial aerosol. One transect is examined in detail as a case study. Approximately 25 to 50% of aerosol with D{sub p} > 110 nm were not activated, the difference between the two approaches possibly representing shattered cloud droplets or unknown artifact. CDNC and interstitial aerosol were anti-correlated in all cloud transects, consistent with the occurrence of dry in-cloud areas due to entrainment or circulation mixing.

54 ENVIRONMENTAL SCIENCES↗

Using depolarization to quantify ice nucleating particle concentrations: a new method

We have developed a new method to determine ice nucleating particle (INP) concentrations observed by the Texas A&M University continuous flow diffusion chamber (CFDC) under a wide range of operating conditions. In this study, we evaluate differences in particle optical properties detected by the Cloud and Aerosol Spectrometer with POLarization (CASPOL) to differentiate between ice crystals, droplets, and aerosols. The depolarization signal from the CASPOL instrument is used to determine the occurrence of water droplet breakthrough (WDBT) conditions in the CFDC. The standard procedure for determining INP concentration is to count all particles that have grown beyond a nominal size cutoff as ice crystals. During WDBT this procedure overestimates INP concentration, because large droplets are miscounted as ice crystals. Here we design a new analysis method based on depolarization ratio that can extend the range of operating conditions of the CFDC. The method agrees reasonably well with the traditional method under non-WDBT conditions with a mean percent error of ±32.1 %. Additionally, a comparison with the Colorado State University CFDC shows that the new analysis method can be used reliably during WDBT conditions.

54 ENVIRONMENTAL SCIENCES↗

Improving the Confidence in Retrievals of Vertical Distributions of Cloud Condensation Nuclei Number Concentration from ARM Supported by Aircraft In Situ Observations

Accurate quantification of the vertical distribution of cloud condensation nuclei (CCN) number concentrations is critical for improving our understanding of aerosol–cloud interactions. Ground-based Raman lidars operated by the Atmospheric Radiation Measurement (ARM) program, together with surface CCN measurements, are used to retrieve vertically resolved CCN number concentrations (Retrieved Number concentration of CCN, RNCCN). These retrievals rely on several assumptions, including that aerosol composition is vertically homogeneous. To assess this assumption, we developed and tested a framework to infer the dominant aerosol classes/types at different altitudes. This was done by applying a k-Nearest-Neighbors (kNN) algorithm to lidar ratio and linear depolarization ratio measurements from Raman lidar. We evaluated the framework using aircraft aerosol and CCN measurements from the ARM Holistic Interactions of Shallow Clouds, Aerosols, and Land Ecosystems (HI-SCALE) field campaign. The results show that RNCCN performance degrades as vertical aerosol complexity increases, i.e., RNCCN agrees with the aircraft CCN in vertically homogeneous conditions, but closure decreases in layered aerosol structures. To generalize beyond individual examples, we introduce a metric (heterogeneity index) that quantifies the vertical complexity by assessing the variation of inferred aerosol classes/types. Case-level statistics show a tendency for RNCCN and aircraft differences to increase with this metric. By detecting retrievals that are likely compromised by aerosol vertical heterogeneity, the proposed framework improves the interpretability and effective use of RNCCN used for long-term evaluation of models and aerosol–cloud interactions.

Tian, Jingjing↗

Carbon–concentration and carbon–climate feedbacks in CMIP6 models and their comparison to CMIP5 models

Results from the fully and biogeochemically coupled simulations in which CO 2 increases at a rate of 1 % yr –1 (1pctCO2) from its preindustrial value are analyzed to quantify the magnitude of carbon–concentration and carbon–climate feedback parameters which measure the response of ocean and terrestrial carbon pools to changes in atmospheric CO 2 concentration and the resulting change in global climate, respectively. The results are based on 11 comprehensive Earth system models from the most recent (sixth) Coupled Model Intercomparison Project (CMIP6) and compared with eight models from the fifth CMIP (CMIP5). The strength of the carbon–concentration feedback is of comparable magnitudes over land (mean ± standard deviation = 0.97 ± 0.40 PgC ppm –1 ) and ocean (0.79 ± 0.07 PgC ppm –1 ), while the carbon–climate feedback over land (–45.1 ± 50.6 PgC °C –1 ) is about 3 times larger than over ocean (–17.2 ± 5.0 PgC °C –1 ). The strength of both feedbacks is an order of magnitude more uncertain over land than over ocean as has been seen in existing studies. These values and their spread from 11 CMIP6 models have not changed significantly compared to CMIP5 models. The absolute values of feedback parameters are lower for land with models that include a representation of nitrogen cycle. The transient climate response to cumulative emissions (TCRE) from the 11 CMIP6 models considered here is 1.77 ± 0.37 °C EgC –1 and is similar to that found in CMIP5 models (1.63 ± 0.48 °C EgC –1 ) but with somewhat reduced model spread. The expressions for feedback parameters based on the fully and biogeochemically coupled configurations of the 1pctCO2 simulation are simplified when the small temperature change in the biogeochemically coupled simulation is ignored. Decomposition of the terms of these simplified expressions for the feedback parameters is used to gain insight into the reasons for differing responses among ocean and land carbon cycle models.

54 ENVIRONMENTAL SCIENCES↗

Versatile soil gas concentration and isotope monitoring: optimization and integration of novel soil gas probes with online trace gas detection

Abstract. Gas concentrations and isotopic signatures can unveil microbial metabolisms and their responses to environmental changes in soil. Currently, few methods measure in situ soil trace gases such as the products of nitrogen and carbon cycling or volatile organic compounds (VOCs) that constrain microbial biochemical processes like nitrification, methanogenesis, respiration, and microbial communication. Versatile trace gas sampling systems that integrate soil probes with sensitive trace gas analyzers could fill this gap with in situ soil gas measurements that resolve spatial (centimeters) and temporal (minutes) patterns. We developed a system that integrates new porous and hydrophobic sintered polytetrafluoroethylene (sPTFE) diffusive soil gas probes that non-disruptively collect soil gas samples with a transfer system to direct gas from multiple probes to one or more central gas analyzer(s) such as laser and mass spectrometers. Here, we demonstrate the feasibility and versatility of this automated multiprobe system for soil gas measurements of isotopic ratios of nitrous oxide (δ18O, δ15N, and the 15N site preference of N2O), methane, carbon dioxide (δ13C), and VOCs. First, we used an inert silica matrix to challenge probe measurements under controlled gas conditions. By changing and controlling system flow parameters, including the probe flow rate, we optimized recovery of representative soil gas samples while reducing sampling artifacts on subsurface concentrations. Second, we used this system to provide a real-time window into the impact of environmental manipulation of irrigation and soil redox conditions on in situ N2O and VOC concentrations. Moreover, to reveal the dynamics in the stable isotope ratios of N2O (i.e., 14N14N16O, 14N15N16O, 15N14N16O, and 14N14N18O), we developed a new high-precision laser spectrometer with a reduced sample volume demand. Our integrated system – a tunable infrared laser direct absorption spectrometry (TILDAS) in parallel with Vocus proton transfer reaction mass spectrometry (PTR-MS), in line with sPTFE soil gas probes – successfully quantified isotopic signatures for N2O, CO2, and VOCs in real time as responses to changes in the dry–wetting cycle and redox conditions. Broadening the collection of trace gases that can be monitored in the subsurface is critical for monitoring biogeochemical cycles, ecosystem health, and management practices at scales relevant to the soil system.

54 ENVIRONMENTAL SCIENCES↗

Burn severity and vegetation type control phosphorus concentration, molecular composition, and mobilization

Shifting phosphorus (P) dynamics after wildfires can have cascading impacts from terrestrial to aquatic environments. However, it is unclear whether shifts in P composition or P concentration are responsible for changes in P dynamics post-fire. We used laboratory leaching experiments of Douglas fir forest and sagebrush shrubland chars to examine how the potential mobility of P compounds is influenced by different burn severities. Burning produced a 6.9- and 29-fold increase in particulate P mobilization but a 3.8- and 30.5-fold decrease in aqueous P released for Douglas fir forest and sagebrush shrubland, respectively. The mechanisms driving particulate- and dissolved-phase P compound mobilization were contrasting. Phosphorus compound mobilization in the particulate phase was controlled by solid char total P concentrations, while the aqueous phase was driven by solubility changes of molecular species. Nuclear magnetic resonance (NMR) and X-ray absorption near-edge structure (XANES) on the solid chars indicated that organic orthophosphate monoester and diester species were thermally mineralized to inorganic P moieties with burning in both vegetation types, which decreases P solubility. This coincided with the production of calcium- and magnesium-bound inorganic P compounds. With increasing burn severity there were systematic shifts in P concentration and composition – higher-severity chars mobilized P compounds in the particulate phase, although the magnitude of change was vegetation-specific. Our results indicate a post-fire transformation to both the composition of the solid charred material and how P compounds are mobilized, which may influence its environmental cycling and fate.

31P solution-state NMR↗

Cloud condensation nuclei concentrations derived from the CAMS reanalysis

Determining number concentrations of cloud condensation nuclei (CCN) is one of the first steps in the chain in analysis of cloud droplet formation, the direct microphysical link between aerosols and cloud droplets, and a process key for aerosol–cloud interactions (ACI). However, due to sparse coverage of in situ measurements and difficulties associated with retrievals from satellites, a global exploration of their magnitude, source as well as temporal and spatial distribution cannot be easily obtained. Thus, a better representation of CCN numbers is one of the goals for quantifying ACI processes and achieving uncertainty-reduced estimates of their associated radiative forcing. Here, we introduce a new CCN dataset which is derived based on aerosol mass mixing ratios from the latest Copernicus Atmosphere Monitoring Service reanalysis (CAMSRA) in a diagnostic model that uses CAMSRA aerosol properties and a simplified kappa-Köhler framework suitable for global models. The emitted aerosols in CAMSRA are not only based on input from emission inventories using aerosol observations, they also have a strong tie to satellite-retrieved aerosol optical depth (AOD) as this is assimilated as a constraining factor in the reanalysis. Furthermore, the reanalysis interpolates for cases of poor or missing retrievals and thus allows for a full spatiotemporal quantification of CCN numbers. The derived CCN dataset captures the general trend and spatial and temporal distribution of total CCN number concentrations and CCN from different aerosol species. A brief evaluation with ground-based in situ measurements demonstrates the improvement of the modelled CCN over the sole use of AOD as a proxy for CCN as the overall correlation coefficient improved from 0.37 to 0.71. However, we find the modelled CCN from CAMSRA to be generally high biased and find a particular erroneous overestimation at one heavily polluted site which emphasises the need for further validation. The CCN dataset (https://doi.org/10.26050/WDCC/QUAERERE_CCNCAMS_v1, Block, 2023), which is now freely available to users, features 3-D CCN number concentrations of global coverage for various supersaturations and aerosol species covering the years 2003–2021 with daily frequency. This dataset is one of its kind as it offers lots of opportunities to be used for evaluation in models and in ACI studies.

54 ENVIRONMENTAL SCIENCES↗

On the circulation, water mass distribution, and nutrient concentrations of the western Chukchi Sea

Substantial amounts of nutrients and carbon enter the Arctic Ocean from the Pacific Ocean through the Bering Strait, distributed over three main pathways. Water with low salinities and nutrient concentrations takes an eastern route along the Alaskan coast, as Alaskan Coastal Water. A central pathway exhibits intermediate salinity and nutrient concentrations, while the most nutrient-rich water enters the Bering Strait on its western side. Towards the Arctic Ocean, the flow of these water masses is subject to strong topographic steering within the Chukchi Sea with volume transport modulated by the wind field. In this contribution, we use data from several sections crossing Herald Canyon collected in 2008 and 2014 together with numerical modelling to investigate the circulation and transport in the western part of the Chukchi Sea. We find that a substantial fraction of water from the Chukchi Sea enters the East Siberian Sea south of Wrangel Island and circulates in an anticyclonic direction around the island. This water then contributes to the high-nutrient waters of Herald Canyon. The bottom of the canyon has the highest nutrient concentrations, likely as a result of addition from the degradation of organic matter at the sediment surface in the East Siberian Sea. The flux of nutrients (nitrate, phosphate, and silicate) and dissolved inorganic carbon in Bering Summer Water and Winter Water is computed by combining hydrographic and nutrient observations with geostrophic transport referenced to lowered acoustic Doppler current profiler (LADCP) and surface drift data. Even if there are some general similarities between the years, there are differences in both the temperature–salinity and nutrient characteristics. To assess these differences, and also to get a wider temporal and spatial view, numerical modelling results are applied. According to model results, high-frequency variability dominates the flow in Herald Canyon. This leads us to conclude that this region needs to be monitored over a longer time frame to deduce the temporal variability and potential trends.

54 ENVIRONMENTAL SCIENCES↗