SEARCH · Engineering Papers

Results for “angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Mach 3.5 boundary-layer transition on a cone at angle of attack

Boundary-layer transition on a sharp 5-deg half-angle cone at incidence was investigated at Mach 3.5 in NASA's Supersonic Low-Disturbance Pilot Tunnel. The tests were conducted with low and high levels of freestream acoustic disturbance, and four angles of attack (alpha/theta-c = 0, 0.12, 0.4, and 0.8). Transition data, obtained with and without significantly reduced freestream acoustic disturbance levels, are compared with conventional ('noisy') wind-tunnel data. It was found that, under quiet flow conditions, there was no significant unit Reynolds number effect, whereas with noisy flow conditions, a significant unit Reynolds number effect was measured on and near the windward ray for alpha/theta-c values 0.4 and 0.8.

King, Rudolph A.↗

NASA NTRS1991

Controlled growth of 3C-SiC and 6H-SiC films on low-tilt-angle vicinal (0001) 6H-SiC wafers

It has been found that, with proper pregrowth surface treatment, 6H-SiC single-crystal films can be grown by chemical vapor deposition (CVD) at 1450 C on vicinal (0001) 6H-SiC with tilt angles as small as 0.1 deg. Previously, tilt angles of greater than 1.5 deg were required to achieve 6H on 6H at this growth temperature. In addition, 3C-SiC could be induced to grow within selected regions on the 6H substrate. the 3C regions contained few (or zero) double-positioning boundaries and a low density of stacking faults. A new growth model is proposed to explain the control of SiC polytype in this epitaxial film growth process.

Powell, J. A.↗

NASA NTRS1991

High angle of attack control law development for a free-flight wind tunnel model using direct eigenstructure assignment

Flight-control laws are developed for a wind-tunnel aircraft model flying at a high angle of attack by using a synthesis technique called direct eigenstructure assignment. The method employs flight guidelines and control-power constraints to develop the control laws, and gain schedules and nonlinear feedback compensation provide a framework for considering the nonlinear nature of the attack angle. Linear and nonlinear evaluations show that the control laws are effective, a conclusion that is further confirmed by a scale model used for free-flight testing.

Wendel, Thomas R.↗

NASA NTRS1991

In-flight leading-edge vortex flow-field survey measurements on a F-18 aircraft at high angle of attack

A rotating rake with 16 hemispherical-tipped five-hole probes was used to obtain flow-field measurements of the leading-edge-extension (LEX) vortex of the F-18 aircraft. The measurements were carried out under 1-g flight conditions at quasi-stabilized angles of attack of 10-52 deg and at Reynolds numbers based on a mean aerodynamic cord up to 16 x 10 to the 6th. Correlations with surface pressure, flow visualization, and computational fluid dynamics results are presented for angles of attack of 19 and 30 deg.

Richwine, David M.↗

NASA NTRS1992

Computing Large-Angle Transients In Structures

LATDYN is computer code for calculating large-angle transient dynamics of flexible articulating structures and mechanisms including joints about which members rotate through large angles. Extends and brings together some of aspects of finite-element analysis of structures, dynamics of multiple bodies, and analysis of control systems. Combines significant portions of their distinct capabilities into one analysis software tool. Software consists of three FORTRAN computer programs: LATDYN program, Preprocessor, and Postprocessor. Written in FORTRAN 77.

Housner, Jerrold M.↗

NASA NTRS1992

Eliminating Deadbands In Resistive Angle Sensors

Proposed shaft-angle-measuring circuit provides continuous indication of angle of rotation from 0 degree to 360 degrees. Sensing elements are two continuous-rotation potentiometers, and associated circuitry eliminates deadband that occurs when wiper contact of potentiometer crosses end contacts near 0 degree position of circular resistive element. Used in valve-position indicator or similar device in which long operating life and high angular precision not required.

Salomon, Phil M.↗

NASA NTRS1991

Development of a pneumatic high-angle-of-attack flush airdata sensing (HI-FADS) system

A nonintrusive high-angle-of-attack flush airdata sensing system was installed and flight tested in the F-18 High Alpha Research Vehicle. This system consists of a matrix of 25 pressure orifices arranged in concentric circles on the nose of the vehicle to determine angles of attack and sideslip, Mach number, and pressure altitude. During the course of the flight tests, it was determined that satisfactory results could be achieved using a subset of just nine ports.

Whitmore, Stephen A.↗

NASA NTRS1991

Target pitch angle for the microburst escape maneuver

The objective of this study was to investigate the constant pitch attitude strategy as a possible non-precision maneuver for recovery from inadvertent wind shear encounters. The Wind Shear Training Aid published by the FAA recommends that upon encountering a severe wind shear, the pilot should apply maximum thrust and rotate the aircraft to an initial pitch target angle of 15 degrees. The 15 degrees target was identified through rigorous analyses using six-degree-of-freedom flight simulators and microburst models representative of actual accident cases. It was found that 15 degrees was an effective target for a wide range of shears, and was generally applicable to most jet transports. This work was undertaken to examine the issue of recovery performance in wind shear of other classes of aircraft - notably turboprop commuters and propeller-driven general aviation planes. It should be possible to postulate a target pitch angle (TPA) for such aircraft, as well.

Mulgund, Sandeep S.↗

NASA NTRS1992

Scaling effects in angle-ply laminates

The effect of specimen size upon the response and strength of +/- 45 degree angle-ply laminates was investigated for two graphite fiber reinforced plastic systems and several stacking sequences. The first material system was a brittle epoxy based system, AS4 fibers in 3502 epoxy, and the second was a tough thermoplastic based system, AS4 fibers in PEEK matrix. For the epoxy based system, two generic +/- 45 degree lay-ups were studied: (+45 degrees sub n/-45 degrees sub n) sub 2S (blocked plies), and (+45 degrees/-45 degrees) sub 2nS, for n=1 and 2. The in-plane dimensions of the specimens were varied such that the width/length relationship was 12.7 x n/127 x n mm, for m=1, 2, 3, or 4. It is shown that the stress/strain response and the ultimate strength of these angle-ply laminates depends on the laminate thickness and the type of generic lay-up used. Furthermore, it is shown that first ply failure occurs in the surface plies as a result of normal rather than shear stresses. The implications of the experimental findings upon the validity of the +/- 45 degree tensile test which is used to determine the in-plane shear response of unidirectional composites are discussed.

Kellas, Sotiris↗

NASA NTRS1992

Study of optical techniques for the Ames unitary wind tunnels. Part 3: Angle of attack

A review of optical sensors that are capable of accurate angle of attack measurements in wind tunnels was conducted. These include sensors being used or being developed at NASA Ames and Langley Research Centers, Boeing Airplane Company, McDonald Aircraft Company, Arnold Engineering Development Center, National Aerospace Laboratory of the Netherlands, National Research Council of Canada, and the Royal Aircraft Establishment of England. Some commercial sensors that may be applicable to accurate angle measurements were also reviewed. It was found that the optical sensor systems were based on interferometers, polarized light detector, linear or area photodiode cameras, position sensing photodetectors, and laser scanners. Several of the optical sensors can meet the requirements of the Ames Unitary Plan Wind Tunnel. Two of these, the Boeing interferometer and the Complere lateral effect photodiode sensors are being developed for the Ames Unitary Plan Wind Tunnel.

Lee, George↗

NASA NTRS1992

The F-18 High Alpha Research Vehicle: A High-Angle-of-Attack Testbed Aircraft

The F-18 High Alpha Research Vehicle is the first thrust-vectoring testbed aircraft used to study the aerodynamics and maneuvering available in the poststall flight regime and to provide the data for validating ground prediction techniques. The aircraft includes a flexible research flight control system and full research instrumentation. The capability to control the vehicle at angles of attack up to 70 degrees is also included. This aircraft was modified by adding a pitch and yaw thrust-vectoring system. No significant problems occurred during the envelope expansion phase of the program. This aircraft has demonstrated excellent control in the wing rock region and increased rolling performance at high angles of attack. Initial pilot reports indicate that the increased capability is desirable although some difficulty in judging the size and timing of control inputs was observed. The aircraft, preflight ground testing and envelope expansion flight tests are described.

Regenie, Victoria↗

NASA NTRS1991

Time-dependent aerodynamic analysis of ducted and unducted propfans at angle of attack

A three-dimensional unsteady aerodynamic analysis is described for predicting the time-dependent flow about ducted and unducted propfans operating at angle of attack. Although the freestream is assumed to be uniform, the flow relative to the rotating blades varies with circumferential position, resulting in an inherent unsteadiness due to the nonaxial inflow. The time-dependent Euler equations are solved utilizing a Runge-Kutta time-stepping scheme. The analysis is based on a finite-volume discretization employing a multiple-block grid network. To permit the use of large calculation time steps, an implicit residual smoothing scheme previously tested for unsteady flow calculations in two dimensions is extended to three spatial dimensions. For unducted propfans, a single H-type grid block is used for each blade passage to determine the time-periodic flowfield. For ducted propfans (ultra-high bypass fans) a body-centered C-type grid is wrapped about the cowl to improve the accuracy of the analysis in the high gradient flow region near the cowl leading edge. Numerical results are compared with available data for both ducted and unducted propfans operating at angle of attack.

Hall, Edward J.↗

NASA NTRS1991

Quasi-linear pitch angle and energy diffusion of pickup ions near Comet Halley

The process of ion pickup in the environment of Halley's comet is studied in order to see if velocity diffusion driven by the observed level of turbulence can explain the observed development of the implanted ion distribution. The theoretical description used is based on a quasi-linear approach and considers the implantation and transport of cometary ions along solar wind flow lines. To make such a study requires some way of extrapolating the measurements on the Giotto trajectory into the upstream region; models for mass loading and turbulence are used. A simplified kinetic equation describing the source, convection, and quasi-linear velocity diffusion of the heavy cometary ions is solved numerically along flow lines parallel to the sun-comet line. Full two-dimensional (pitch angle and velocity) distributions are obtained at positions along the Giotto trajectory, which are compared with measurements. This study finds that quasi-linear theory, with the empirical model for the observed turbulence level, produces the right order of pitch angle diffusion.

Huddleston, D. E.↗

NASA NTRS1992

Combined effect of nose bluntness and angle of attack on slender bodies in viscous hypersonic flows

Hypersonic flows over cones and straight biconic configurations are calculated for a wide range of free stream conditions in which the gas behind the shock is treated as perfect. Effect of angle of attack and nose bluntness on these slender cones in air is studied extensively. The numerical procedures are based on the solution of complete Navier-Stokes equations at the nose section and parabolized Navier-Stokes equations further downstream. The flow field variables and surface quantities show significant differences when the angle of attack and nose bluntness are varied. The complete flow field is thoroughly analyzed with respect to velocity, temperature, pressure, and entropy profiles. The post shock flow field is studied in detail from the contour plots of Mach number, density, pressure, and temperature. The effect of nose bluntness for slender cones persists as far as 200 nose radii downstream.

Tiwari, S. N.↗

NASA NTRS1991

An approximate analytical solution for interlaminar stresses in angle-ply laminates

An improved approximate analytical solution for interlaminar stresses in finite width, symmetric, angle-ply laminated coupons subjected to axial loading is presented. The solution is based upon statically admissible stress fields which take into consideration local property mismatch effects and global equilibrium requirements. Unknown constants in the admissible stress states are determined through minimization of the complementary energy. Typical results are presented for through-the-thickness and interlaminar stress distributions for angle-ply laminates. It is shown that the results represent an improved approximate analytical solution for interlaminar stresses.

Rose, Cheryl A.↗

NASA NTRS1992

A study of control approaches for large-angle beam slewing with an adaptive truss

This paper presents an analytical study of large-angle beam slewing with a double-octahedral adaptive truss and documents the performance of different control laws for simultaneous vibration control and beam slewing. A general nonlinear model of an adaptive truss and flexible beam is derived which includes a degree-of-freedom previously considered negligible for a double-octahedral adaptive truss actuated at its mid-plane. Linear and nonlinear, gain-scheduled, control laws are developed and applied to the nonlinear model for various large-angle slewing maneuvers. The nonlinear, gain-scheduled, control law is found to perform better than the linear control laws.

Warrington, Thomas J.↗

NASA NTRS1992

Component build-up method for engineering analysis of missiles at low-to-high angles of attack

Methods are presented for estimating the component build-up terms, with the exception of zero-lift drag, for missile airframes in steady flow and at arbitrary angles of attack and bank. The underlying and unifying bases of all these efforts are slender-body theory and its nonlinear extensions through the equivalent angle-of-attack concept. Emphasis is placed on the forces and moments which act on each of the fins, so that control cross-coupling effects as well as longitudinal and lateral-directional effects can be determined.

Hemsch, Michael J.↗

NASA NTRS1991

Development of a pneumatic high-angle-of-attack flush airdata sensing system

Whitmore, Stephen A.↗