Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “adsorbates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Experimental and Computational Studies of Carbon–Carbon Bond Formation via Ketonization and Aldol Condensation over Site-Isolated Zirconium Catalysts

We report here the preparation and investigation of isolated Zr centers supported on a high surface area silica for the conversion of carboxylic acids to internal ketones by ketonic decarboxylation (ketonization) and the aldol condensation of ketones to dimeric enones. Catalysts were synthesized by the grafting of Cp 2 ZrCl 2 on the surface of amorphous silica. The connectivity of Zr was characterized by XRD, UV-vis, and Raman spectroscopy. For the lowest Zr loading, Zr is present predominantly as isolated monomeric species. As the Zr loading is increased, a progressively larger fraction of Zr forms oligomeric species and ZrO nanoparticles. Measurements of catalytic activity show that the turnover frequency for carboxylic acid ketonic decarboxylation reaction and aldol condensation of ketones decreases monotonically with increasing Zr loading. An H/D kinetic isotope effect was not observed over isolated Zr catalysts, suggesting that α-H abstraction is not the rate-determining step, rather C-C bond forming may be rate limiting for both reactions. This conclusion is supported by computational modeling of the reaction mechanism. The proposed catalytic cycle for ketonization proceeds via a β-keto acid intermediate on isolated Zr sites that are always coordinatively saturated with C-C bond formation as the rate-limiting step. C-C bond formation is also rate-determining for aldol condensation, with an apparent activation energy that is in good agreement with the experiment if the resting state is a saturated ≡ZrOH site with two adsorbed ketone molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mild and Selective Hydrogenation of Nitrate to Ammonia in the Absence of Noble Metals

Motivated by increased awareness about nitrate contamination of surface waters and its deleterious effects in human and animal health, we sought an alternative, non-noble metal catalyst for the chemical degradation of nitrate. First row transition metal phosphides recently emerged as excellent alternatives for hydrogen evolution and hydrotreating reactions. We demonstrate that a key member of this family, Ni 2 P, readily hydrogenates nitrate (NO 3 – ) to ammonia (NH 3 ) near ambient conditions with very high selectivity (96%). One of the few non-precious metal-based catalysts for this transformation, and among ca. 1% of catalysts with NH 3 selectivity, Ni 2 P can be recycled multiple times with limited loss of activity. Both nitrite (NO 2 – ) and nitric oxide (NO) intermediates are also hydrogenated. Density functional theory (DFT) indicates that—in the absence of a catalyst—nitrite hydrogenation is the reaction bottleneck. A variety of adsorbates (H, O, N, NO) induce surface reconstruction with top-layer Ni-rich surface stoichiometry. Critically, H saturation coverage on Ni 2 P(001) is only ca. 3 nm –2 , significantly less than that on Pd(111) and Ni(111) of ca. 15–18 nm –2 , which may play a key role in allowing coadsorption of NO x – . Here the ability of Earth-abundant, binary metal phosphides such as Ni 2 P to catalyze nitrate hydrogenation could transform and help us to better understand the basic science behind catalytic hydrogenation and, in turn, advance the next generation of oxyanion removal technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reaction Mechanism of Vapor-Phase Formic Acid Decomposition over Platinum Catalysts: DFT, Reaction Kinetics Experiments, and Microkinetic Modeling

A combination of periodic density functional theory (DFT, PW91-GGA) calculations, reaction kinetics experiments, and mean-field microkinetic modeling is used to derive insights on the reaction mechanism and determine the nature of the active site under reaction conditions for the vapor-phase decomposition of formic acid (FA, HCOOH) over Pt/C catalysts. Microkinetic models formulated using DFT energetics derived on the clean Pt(100) and Pt(111) required large parameter adjustments to reproduce the experimentally measured apparent activation energies and reaction orders. Further, these models predicted high surface coverage of adsorbed carbon monoxide (CO*), inconsistent with the environment of the active site in the DFT calculations on the clean surfaces. Consequently, we reperformed DFT calculations for the entire reaction network on partially CO*-covered (4/9 monolayer, ML) Pt(111) and Pt(100). The resultant microkinetic models, with thermochemistry and kinetics explicitly dependent on CO* coverage, were able to reproduce the experimentally determined activation energies and reaction orders, in addition to being self-consistent in CO* coverage. Our results suggest that Pt(100) is likely poisoned by CO* under typical reaction conditions and does not contribute significantly to the experimentally observed reactivity. Instead, we find that Pt(111) better represents the active site for FA decomposition reaction on Pt/C catalysts. The optimized model on 4/9 ML CO*-covered Pt(111) suggests that the reaction occurs via the carboxyl (COOH*) intermediate and that the spectator CO*-assisted pathways play a significant role under reaction conditions. Lastly, this study underscores the importance of spectator species on the energetics and the mechanism of a catalytic reaction and their key role in developing a model that better addresses the nature of the active site under realistic catalytic reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular-scale Insights into Cooperativity Switching of x TAB Adsorption on Gold Nanoparticles

Quantifying adsorption behaviors is crucial for various applications such as catalysis, separation, and sensing, yet it is generally challenging to access in solution. Here, we report a combined experimental and computational study of the adsorption behaviors of alkyl-trimethylammonium bromides (xTAB), a class of ligands important for colloidal nanoparticle stabilization and shape control, with various alkyl chain lengths x on Au nanoparticles. We use density functional theory (DFT) to calculate xTAB binding energies on Au{111} and Au{110} surfaces with standing-up and lying-down configurations, which provides insights into the adsorption affinity and cooperativity differences of xTAB on these two facets. We demonstrate the key role of van der Waals interactions in determining the xTAB adsorption behavior. These computational results predict and explain the experimental discovery of xTAB’s adsorption behavior switch from stronger affinity, negative cooperativity to weaker affinity, positive cooperativity when the concentration of xTAB increases in solution. We also show that in the standing-up configuration, bilayer adsorption may occur on both facets, which can lead to different differential binding energies and consequently adsorption crossover between the two facets when the ligand concentration increases. Our combined experimental and computational approaches demonstrate a paradigm for gaining molecular-scale insights into adsorbate–surface interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Depolymerization as a Design Strategy: Depolymerization Etching of Polymerization-Induced Microphase Separations

Thermally triggered depolymerization has traditionally been viewed through the lens of sustainability and recycling, not as a constructive tool for materials design. Herein, we show that selective, thermally triggered depolymerization to gaseous monomer serves as a solvent-free strategy for generating porosity in nanostructured polymer materials, offering a means to bypass the mass transport limitations inherent in conventional solution-based etching. As a demonstration platform, we employed polymerization-induced microphase separation (PIMS) to generate disordered bicontinuous block copolymer structures with embedded depolymerizable domains. By incorporating a methacrylate block susceptible to thermal depolymerization within a cross-linked, depolymerization-resistant styrenic matrix, we developed a process we term depolymerization etching of polymerization-induced microphase separations (DEPIMS). This approach enables highly selective and efficient domain removal via reversion to monomer to produce mesoporous materials with high surface areas (>200 m 2 /g). Subsequent surface functionalization yielded mesoporous adsorbents with tunable uptake kinetics and among the highest dye adsorption capacities reported for PIMS-derived materials, demonstrating the adaptability of the DEPIMS platform for chemical separations. DEPIMS can also be extended to a gram-scale, one-pot approach to yield mesoporous materials with recoverable monomer in under 12 h. These findings reposition thermal depolymerization from a sustainability tool to a broadly enabling strategy for scalable, on-demand fabrication of functional nanostructured materials.

Depolymerization↗
DOE OSTI2020

Transformation of Ferrihydrite to Goethite and the Fate of Plutonium

Understanding the interactions between plutonium and iron (oxy)hydroxide minerals is necessary to gain a predictive understanding of plutonium environmental mobility and to evaluate long-term performance of nuclear waste repositories. We investigated the fate of plutonium during the formation of ferrihydrite and its subsequent transformation into goethite. Ferrihydrite was synthesized with varying quantities of Pu(IV) following either a sorption or coprecipitation process; the ferrihydrite was then aged hydrothermally to yield goethite. Additionally, the synthesized materials were characterized via extended X-ray absorption fine structure spectroscopy, transmission electron microscopy, and acid leaching to elucidate the nature of plutonium association with ferrihydrite and goethite. In samples prepared following the sorption method, plutonium was identified in two different forms: a PuO 2 precipitate and a surface-sorbed plutonium complex. For the samples prepared via coprecipitation, no PuO 2 formation occurs in the ferrihydrite precursor and in the goethite experiments where plutonium concentration is ≤1000 ppm (mg kg –1 ). In these coprecipitation products, plutonium is strongly bound to the minerals either via formation of an inner sphere complex, or via an incorporation process. In the coprecipitation experiments, PuO 2 formation only occurs at the highest plutonium concentration (3000 ppm), suggesting that during ferrihydrite transformation into goethite, part of the plutonium can be remobilized to form PuO 2 nanoparticles. Collectively, our results demonstrate that the nature of plutonium associated with the precursor ferrihydrite (adsorbed vs coprecipitated) will have a direct impact on the association of plutonium with its alteration product (goethite). Furthermore, the data illustrate that some properties of plutonium association with the precursor ferrihydrite are retained through the transformation into goethite. These findings show that plutonium strongly associates with iron (oxy)hydroxides formed through coprecipitation processes and in these materials, plutonium can be strongly retained by the iron minerals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Vanadate Retention by Iron and Manganese Oxides

Anthropogenic emissions of vanadium (V) into terrestrial and aquatic surface systems now match those of geogenic processes, and yet, the geochemistry of vanadium is poorly described in comparison to other comparable contaminants like arsenic. In oxic systems, V is present as an oxyanion with a +5 formal charge on the V center, typically described as H x VO 4 (3–x)– , but also here as V(V). Iron (Fe) and manganese (Mn) (oxy)hydroxides represent key mineral phases in the cycling of V(V) at the solid–solution interface, and yet, fundamental descriptions of these surface-processes are not available. Here, we utilize extended X-ray absorption fine structure (EXAFS) and thermodynamic calculations to compare the surface complexation of V(V) by the common Fe and Mn mineral phases ferrihydrite, hematite, goethite, birnessite, and pyrolusite at pH 7. Inner-sphere V(V) complexes were detected on all phases, with mononuclear V(V) species dominating the adsorbed species distribution. Our results demonstrate that V(V) adsorption is exergonic for a variety of surfaces with differing amounts of terminal –OH groups and metal–O bond saturations, implicating the conjunctive role of varied mineral surfaces in controlling the mobility and fate of V(V) in terrestrial and aquatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Sorption of Arsenate, Selenate, and Molybdate on the Barite (001) Surface

Interactions of ions with ionically bonded minerals such as barite (BaSO 4 ) influence the fate and transport of the ions, while the factors that control the sorption of toxic oxyanions on barite remain elusive. In this study, the sorption of arsenate, selenate, and molybdate on the barite (001) surface was examined at pH ~5 using in situ crystal truncation rod analysis, resonant anomalous X-ray reflectivity, and atomic force microscopy. The results show that arsenate and selenate mainly incorporate into the top monolayer of barite, while molybdate primarily adsorbs above the surface. The sorption coverage of arsenate is greater (by ~100%) than that of selenate but similar to that of molybdate. The different incorporation coverages between arsenate and selenate can be explained by their different protonation states at pH 5. The incorporated arsenate may be stabilized by hydrogen bonds between arsenate and oxygen atoms of neighboring sulfate compared to selenate, which exists predominantly in the deprotonated state. The adsorption of molybdate above the surface probably stems from a surface-induced oligomerization, as the anion and the oligomer may be too large for incorporation. Our observation of these different sorption mechanisms demonstrates how the physicochemical properties of the anions control the selective uptake of the toxic metals on the dominant surface of the ionically bonded mineral barite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Revisiting Selenium Interactions with Pyrite: From Adsorption to Coprecipitation

Interactions of selenium (Se), a trace element bio-essential at low concentrations but highly toxic at high concentrations, with the most abundant sulfide mineral in the Earth's crust, namely pyrite, was investigated over a wide range of time scales. At the nanosecond scale, selenate Se(VI)O 4 2– adsorption onto the net pyrite surface is shown by ab-initio computations to proceed via the formation of a chemical bond between an oxyanion oxygen atom and a surface Fe atom, weakening the other Se-O bonds and reducing Se atom oxidation state. At the hour-to-day scale, adsorption and coprecipitation of selenate Se(VI)O 4 2– and selenite, Se(IV)O 3 2– , were investigated through wet chemical batch experiments at various pH values at different sulfide concentrations. Selenium removal from solution is slower and weaker for selenate than for selenite. After 24h, only 10% of selenate, against 60% of selenite (up to 100% in the presence of sulfide), is removed by the pyrite surface. Independently of its original oxidation state, adsorbed Se is completely reduced to elemental trigonal selenium via adsorption, precipitation or coprecipitation, as shown by XANES spectroscopy. Here, our EXAFS results, compared to published data on Se-rich pyrite, show a Se to S substitution within the pyrite structure. The reductive coprecipitation mechanism of selenium with pyrite represents valuable new insights for improving our understanding of modern and ancient biogeochemical cycles involving Se. In addition, several industries can benefit from direct applications of our findings, such as water treatment, green technologies and sustainable mining.

Adsorption↗
DOE OSTI2024

Adsorption of Neodymium, Dysprosium, and Ytterbium to Goethite under Varying Aqueous Chemistry Conditions

The adsorption of rare earth elements (REEs) to iron oxides can regulate the mobility of REEs in the environment and is heavily influenced by water chemistry. This study utilized batch experiments to examine the adsorption of Nd, Dy, and Yb to goethite under varying pH, electrolyte (type and concentration), and concentrations of dissolved inorganic carbon and citrate. REE adsorption was strongly influenced by pH, with an increase from essentially no adsorption at pH 3.0 to nearly complete adsorption at pH 6.5 and higher. Citrate enhanced the adsorption of REEs at low pH (<5.0), likely by forming goethite-REE-citrate ternary surface complexes. However, citrate inhibited the adsorption of REEs at higher pH (>5.0) by forming aqueous REE-citrate complexes. Ionic strength had a small influence on REE adsorption, and the presence of dissolved inorganic carbon had no discernible effect. Equilibrium adsorption was interpreted with a triple-layer surface complexation model (SCM). The selection of surface complexation reactions was guided by extended X-ray absorption fine structure spectra. An SCM with a single bidentate inner-sphere surface complexation reaction for Nd and two inner-sphere surface complexation reactions (one monodentate and one bidentate reaction) for Dy and Yb effectively simulated adsorption across a broad range of conditions in the absence of citrate. Accounting for the effects of citrate on REE adsorption required the addition of up to two ternary REE-citrate-goethite surface complexes. The SCM can enable predictions of REE transport in subsurface environments that have goethite as an important adsorbent mineral. Furthermore, this predictive capability could contribute to identifying potential REE sources and facilitating efficient extraction of REEs.

58 GEOSCIENCES↗
DOE OSTI2020

Effects of Surface Roughness on the Electrochemical Reduction of CO 2 over Cu

We have investigated the role of surface roughening on the CO 2 reduction reaction (CO 2 RR) over Cu. The activity and product selectivity of Cu surfaces roughened by plasma pretreatment in Ar, O 2 , or N 2 were compared with that of electrochemically polished Cu samples. Differences in total and product current densities, the ratio of current densities for HER (the hydrogen evolution reaction) to CO 2 RR, and the ratio of current densities for C 2+ to C 1 products depend on the electrochemically active surface and are nearly independent of plasma composition. Theoretical analysis of an electropolished and roughened Cu surface reveals a higher fraction of undercoordinated Cu sites on the roughened surface, sites that bind CO preferentially. Roughened surfaces also contain square sites similar to those on a Cu(100) surface but with neighboring step sites, which adsorb OC-COH, a precursor to C 2+ products. Here, these findings explain the increases in the formation of oxygenates and hydrocarbons relative to CO and the ratio of oxygenates to hydrocarbons observed with increasing surface roughness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Inelastic Neutron Scattering Observation of Plasma-Promoted Nitrogen Reduction Intermediates on Ni/γ-Al 2 O 3

Plasma-assisted catalysis is an emerging technology for the atmospheric pressure and low bulk gas temperature synthesis of ammonia from molecular nitrogen and hydrogen. Direct evidence for plasma-induced surface reaction intermediates relevant to ammonia production, including surface hydrides and NH x (x = 1, 2, 3) species, has remained elusive. In this work, we report inelastic neutron scattering (INS) observations of alumina-supported Ni particles after treatment with N 2 and H 2 plasmas. INS experiments reveal the presence of NH x species and hydrides on Ni sites after exposure to sequential N 2 and H 2 plasma treatments. By separating exposure, we exclude the presence of plasma-phase reactions and demonstrate that these species are generated through plasma-facilitated surface reactions. Computed synthetic INS spectra of NH 3 , NH 2 and NH adsorbates on Ni support the experimental assignments of surface intermediates. The results directly implicate plasma stimulation of dinitrogen in generation of surface-bound nitrogen that participates in further hydrogenation reactions driven either thermally or with H 2 plasma.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Energy Flows in Static and Programmable Catalysts

Programmable catalysts that change on the time scale of a catalytic cycle provide a new opportunity to control the flow of energy to reactants and products to promote faster and more selective chemistry. While traditional chemical manufacturing processes consume energy to achieve favorable reaction conditions, programmable catalysts aim to dynamically add or remove energy to catalytic cycles through perturbations of the catalytic surface via strain, charge, or light. These surface energy flows are quantified by the changes in adsorbate binding energy with time, and the overall efficiency relating energy inputs to catalytic performance is defined by the characteristics of the undulating catalytic surface. Here, understanding and quantifying energy flows in programmable catalysts provides baseline definitions and metrics for comparing dynamic conditions and identifying optimal catalytic performance for more efficient chemical manufacturing.

Binding energy↗
DOE OSTI2025

Surface Charge in Electrical Double Layer as a Kinetic Descriptor of Electrocatalytic Reactions

The successful commercialization of electrochemical energy-conversion systems hinges on a deeper understanding of electrocatalytic reaction kinetics. Despite extensive research, a key descriptor that characterizes electrolyte effects on reaction kinetics remains elusive. Here, surface charge in electrical double layers (EDLs) is introduced as a descriptor for electrolyte-dependent kinetics. The surface charge is calculated with a continuum EDL model parameterized by density-functional theory. The model is validated by reproducing the anomalously low slope of Pt(111) in Parsons-Zobel plots. Strong correlations are observed between calculated surface charge and experimental kinetic currents for hydrogen evolution, oxygen reduction, and CO 2 -reduction reactions across various pH levels and cationic species. These correlations can be either promotional or inhibitory, depending on solute-intermediate interactions. In acidic media, incorporating adsorbate charge captures specific adsorption effects in oxygen reduction reaction. In conclusion, these findings establish surface charge density as a key descriptor for electrolyte-dependent kinetics, which will guide the design of the electrode/electrolyte interface.

Adsorption↗
DOE OSTI2025

Redox-Active Crown Ether Copolymer for Selective Lithium Recovery from Spent Lithium-Ion Batteries

The increasing demand for lithium, alongside concerns over resource scarcity and supply chain risks, has driven the need for alternative lithium sources, particularly from spent lithium-ion batteries (LIBs). Here, in this work, we introduce a redox-active crown ether copolymer designed for highly selective and electrochemically reversible lithium recovery from organic LIB leachates. A lithium-selective moiety, (12-crown-4)methyl methacrylate (12C4MA), is combined with a redox-active moiety, ferrocenylpropyl methacrylamide (FPMAm), into a redox copolymer electrosorbent to replace acid-based regeneration with electrostatic repulsion. The redox response enhances lithium ingress into the polymer, doubling lithium uptake (0.58 mol Li /mol CrE ) and enabling electrochemical regeneration upon the FPMAm oxidation. Our system exhibits exclusive lithium uptake, even in complex leachates containing competing metals (e.g., iron, nickel, and cobalt) and organic degradants. Techno-economic analysis highlights high energy efficiency and competitive lithium pricing to the market value (∼$12.7 per kg Li ). Overall, our work demonstrates a scalable, electrified adsorbent platform for sustainable and chemical-free critical metal recovery.

adsorption↗
DOE OSTI2026

Arsenic Removal by Continuous Flow-Through Iron Electrocoagulation and Downstream Steps under Environmentally Relevant Conditions

Arsenic (As) contamination in drinking water is a major health concern. This study investigated As(III) and As(V) removal by continuous flow-through iron electrocoagulation (EC) under varying iron doses and water chemistry conditions. Effective arsenic removal (>90% of 100 µg/L) was achieved with a low iron dose of 5 mg/L and a short EC reactor residence time of 11 s that was followed by flocculation and settling. Removal was primarily through adsorption of As(III) and As(V) to the EC-generated Fe(III) oxyhydroxide solids ferrihydrite and lepidocrocite. For influents containing As(III), oxidation of As(III) to As(V) also occurred. The removal processes occurred in both the EC reactor and downstream treatment. EC-generated reactive solids with high surface area and adsorption capacity provided better arsenic removal than with preformed adsorbents. The removed arsenic remained largely immobile in the EC-generated solids. The extent of arsenic removal was generally similar across pH 6 to 8. Phosphate (1 mg/L as P) inhibited the removal of both arsenic species. Dissolved silica (20 mg/L as SiO2) suppressed As(III) removal but had little effect on the amount of As(V) removed. In addition to thermodynamic effects on adsorption equilibria, pH and co-occurring phosphate and silica influenced removal rates by affecting iron oxidation, nucleation, and aggregation kinetics. The results integrate mechanistic understanding with treatment performance, providing insight relevant to both fundamental research and the application of EC in water treatment.

Arsenic, electrocoagulation, iron oxide, phosphate↗
DOE OSTI2023

Full Exclusion of Branched Hexanes from Their Linear Isomer by a Robust Aluminum Metal–Organic Framework with Tailored Pore Structure

High-efficiency separation of hexane isomers through selective molecular exclusion represents an important yet challenging task in the petrochemical industry. It has stringent requirements on the adsorbents' pore shape and dimensions. Here we report the complete exclusion of branched hexanes from their linear isomer by an aluminum metal-organic framework, CAU-21-ODB (ODB = 4,4'-oxydibenzoate) with high stability. The unique gourd-shaped channels with suitable pore aperture lead to substantial uptake of nHEX (141 mg/g at 30 °C) but negligible adsorption of its branched isomers under identical conditions. Furthermore, the capability of CAU-21-ODB for the separation of hexane isomers has been verified by multicomponent breakthrough experiments. DFT calculations further confirm the size-exclusion based separation mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nickel Isonicotinate Framework with Optimal Pore Structure for Complete Discrimination of Hexane Isomers

Efficient separation of physicochemically similar alkanes is of vital importance. Adsorptive separation utilizing porous materials such as metal–organic frameworks with tunable pore structure and surface functionality represents an energy-efficient technology. In this study, we demonstrate successful separation of alkanes with varying degree of branching using a microporous nickel isonicotinate framework, Ni(4-PyC) 2 . Its 2-fold interpenetrated diamondoid structure with well-suited pore size enables selective adsorption of linear and monobranched hexane isomers, while excluding dibranched isomer. Breakthrough experiments validated its capability to completely discriminate all three hexane isomers. Ab initio calculations combined with in situ infrared spectroscopic analysis unveiled the nature of host–guest interactions and differences in the binding energies and diffusion barriers among the isomers. Furthermore, having well-balanced adsorption uptakes (146 and 79 mg g –1 of nHEX and 3MP), high nHEX/DMB uptake ratio (12.2) and fast kinetics, Ni(4-PyC) 2 stands out as a promising adsorbent for complete separation of hexane isomers under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗