Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Window Materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Work Function Matching Passive Lunar Dust Mitigation Coating Preparation for Lunar Flight Opportunity

With the Artemis program, NASA isplanning longer stays on the surface, with more activities that have the potential to put the astronauts and equipment in contact with greater quantities of lunar dust. The success of these missions will depend on our understanding of material interactions with lunar dust and the development of ways to mitigate dust effects. This is particularly truein cases where exposure to dust will lead to failure of components, unacceptable loss of power or thermal control, unacceptable loss of visibility, or health issues.Optically transparent, sputter deposited,work function matching coatings are being developed at NASA Glenn Research Center to reduce adhesion of dust to windows, lenses and display panels by matching the minimum energy to remove an electron from the surface to that oflunar dust in order to reduce adhesion due to charge transfer. One of these work function matching coatings will be tested as part of Aegis Aerospace Inc.’s Regolith Adherence Characterization experiment going to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander in 2023. Preparation of the work function matching coating and initial characterization prior to delivery for flight integration will be discussed.

Lunar dust, passive mitigation, CLPS demonstration↗

Delayed-Gamma Energy Biasing with Exact Energy Sampling in MCNP 6.2.0

Characterization of delayed-particle signatures is of the utmost importance for detecting, identifying, and quantifying special nuclear material (SNM). Various non-destructive assay (NDA) techniques used in nuclear material safeguards rely on characteristic gamma-ray or neutron emissions to infer properties of a material. The all-particle, all-energy Monte-Carlo radiation transport code MCNP6 is capable of simulating delayed-particle signatures from SNM in addition to modeling the transport of emitted particles to a detector or other instrument. In some cases, NDA techniques require the measurement of low probability emissions from a given material. In physical scenarios, this problem can be bypassed by longer count-times or may be simply irrelevant due to the mass, and therefore the total activity, of the material being measured. However, when applying the Monte-Carlo method to such scenarios, sampling of low probability emissions requires a large number of histories to converge to a statistically acceptable solution. To address this issue, the delayed-neutron and gamma energy biasing feature was introduced in MCNP6 by H. Armstrong et al. in 2013 which allows the user to set up energy windows in which delayed-particle emission sampling can be adjusted. For delayed-gamma sampling, this biasing method was based on the bin-wise structure of gamma emission data for both the multi-bin gamma and line-emission sampling modes. Recent improvements have been made to the line-emission sampling algorithm which upgrade the previous mini-bin sampling treatment to an exact energy-line treatment. This upgrade was not compatible with the biasing method implemented by H. Armstrong et al. due to the sampled data no longer having a bin-wise structure in line-emission mode. For this reason the delayed-gamma energy biasing feature has been rewritten to support the exact line-sampling treatment. This paper provides a description of the delayed-gamma energy biasing (DGEB) feature in MCNP6 as well as results and discussion for a gamma-ray spectroscopy example used to demonstrate the biasing utility. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hematite Crystallization from a Two-Line Ferrihydrite Suspension

Rational design and synthesis of materials, determination of environmental conditions at the time of mineral formation, and definition of mechanisms in biomineralizing systems all require an understanding of the effect of multiple factors on modulating crystallization pathways. In this study, we investigate the influence of temperature, oxalate additive, aging time, and addition of seed crystals on hematite (α-Fe 2 O 3 , Hm) crystallization from a two-line ferrihydrite (Fe 2 O 3 ·xH 2 O, Fh) suspension. We also investigate the effect of temperature on the aging of spindle-shaped Hm mesocrystals, which we synthesize through the addition of sodium oxalate. The results show that Hm mesocrystals form in a temperature window of 45 °C-130 °C. Temperatures ≥ 140 °C favor formation of rhombohedral Hm, suggesting classical monomer-by-monomer growth dominates, whereas crystallization by particle attachment (CPA) is dominant between 45 and 90 °C, while the two processes compete in the intermediate temperature range. Aging of mesocrystals in the original solution at 90 °C or 180 °C leads to a slow morphological evolution towards rhombohedral crystals due to Ostwald ripening. Then, by utilizing rhombohedral Hm and rod-shaped goethite as substrates on which to assemble the mesocrystals, we demonstrate formation of complex heterogeneous structures.

36 MATERIALS SCIENCE↗

Internal curing of cement pastes by means of superabsorbent polymers visualized by neutron tomography

Highlights: • The kinetics of water release from SAPs were studied by neutron tomography. • The time window for internal curing was linked to the water release from SAPs. • The water release links to the SAP effectiveness to mitigate autogenous shrinkage. • One SAP type was effective while another prematurely released its stored water. Superabsorbent polymers (SAPs) are used to counteract self-desiccation in order to mitigate autogenous shrinkage, a problem in cementitious systems with a low water-to-cement ratio. The release kinetics during internal curing are of importance as not all SAP types are able to efficiently mitigate autogenous shrinkage. In this study, neutron tomography is used to study and visualize the water release kinetics over time. Per-voxel analysis of the time-attenuation curve was performed using piecewise-constant functions. Two different SAP types were studied, one being able to mitigate autogenous shrinkage and one quickly releasing its stored water after final setting. The tomography results correspond to autogenous shrinkage measurements and nuclear magnetic resonance tests. The visualization provides information on the time of water release by the SAPs after setting and the time window of internal curing. This opens additional insights towards the application of SAPs in the construction sector and provides information on the mechanism of internal curing.

36 MATERIALS SCIENCE↗

Phase behaviours of superionic water at planetary conditions

Most water in the Universe may be superionic, and its thermodynamic and transport properties are crucial for planetary science but difficult to probe experimentally or theoretically. We use machine learning and free-energy methods to overcome the limitations of quantum mechanical simulations and characterize hydrogen diffusion, superionic transitions and phase behaviours of water at extreme conditions. Furthermore, we predict that close-packed superionic phases, which have a fraction of mixed stacking for finite systems, are stable over a wide temperature and pressure range, whereas a body-centred cubic superionic phase is only thermodynamically stable in a small window but is kinetically favoured. Our phase boundaries, which are consistent with existing—albeit scarce—experimental observations, help resolve the fractions of insulating ice, different superionic phases and liquid water inside ice giants.

36 MATERIALS SCIENCE↗

Directed self-assembly of block copolymer films on atomically-thin graphene chemical patterns

Directed self-assembly of block copolymers is a scalable method to fabricate well-ordered patterns over the wafer scale with feature sizes below the resolution of conventional lithography. Typically, lithographically-defined prepatterns with varying chemical contrast are used to rationally guide the assembly of block copolymers. The directed self-assembly to obtain accurate registration and alignment is largely influenced by the assembly kinetics. Furthermore, a considerably broad processing window is favored for industrial manufacturing. Using an atomically-thin layer of graphene on germanium, after two simple processing steps, we create a novel chemical pattern to direct the assembly of polystyreneblock-poly(methyl methacrylate). Faster assembly kinetics are observed on graphene/germanium chemical patterns than on conventional chemical patterns based on polymer mats and brushes. This new chemical pattern allows for assembly on a wide range of guiding periods and along designed 90° bending structures. We also achieve density multiplication by a factor of 10, greatly enhancing the pattern resolution. Lastly, the rapid assembly kinetics, minimal topography, and broad processing window demonstrate the advantages of inorganic chemical patterns composed of hard surfaces.

36 MATERIALS SCIENCE↗

Accessing a growth window for SrVO{sub 3} thin films

Stoichiometric SrVO{sub 3} thin films were grown over a range of cation fluxes on (001) (La{sub 0.3}Sr{sub 0.7})(Al{sub 0.65}Ta{sub 0.35})O{sub 3} substrates using hybrid molecular beam epitaxy, where a thermal effusion cell was employed to generate a Sr flux and V was supplied using the metal-organic precursor vanadium oxytriisopropoxide (VTIP). By systematically varying the VTIP flux while keeping the Sr flux constant, a range of flux ratios were discovered in which the structural and electronic properties of the SrVO{sub 3} films remained unaltered. The intrinsic film lattice parameter and residual resistivity were found to be the smallest inside the growth window, indicating the lowest defect concentration of the films, and rapidly increased for cation flux ratios deviating from ideal growth condition. Reflection high-energy electron diffraction showed that films grown within this range had smooth surfaces and diffraction patterns were free of additional spots, while otherwise the growing surface was rough and contained additional crystalline phases. Results show the existence of a SrVO{sub 3} growth window at sufficiently high growth temperature, in which high-quality, stoichiometric films can be grown in a robust, highly reproducible manner that is invulnerable to unintentional flux variation.

36 MATERIALS SCIENCE↗

Multilevel peel-off patterning of a prototype semitransparent organic photovoltaic module

Semitransparent organic photovoltaics (ST-OPVs) with applications to power generating windows have shown substantial increases in power conversion efficiency (PCE) and average photopic transmission (APT) at the laboratory scale. Here, the demonstration of similarly efficient, large-scale ST-OPV modules with geometric fill factors (GFF) approaching 100%, however, remains a challenge. Here, we employ a multilevel peel-off patterning method that can achieve micron-scale resolution without exposing chemically sensitive organic materials to solvents. Eight, 4 cm × 0.4 cm cells are connected in series to realize a prototype ST-OPV module with GFF = 95.8%, with PCE = 7.3 ± 0.2% under simulated AM 1.5G illumination at 1 sun intensity, APT = 41.8 ± 1.4%, and a light utilization efficiency of LUE = 3.1 ± 0.1%. A neutral color STOPV module is also demonstrated with 1.7 ± 0.1% and International Commission on Illumination (CIE) LAB coordinates of (L*, a*, b*) = (53.7, -1.9, -3.9).

14 SOLAR ENERGY↗

CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects

Cadmium telluride (CdTe)-based cells have emerged as the leading commercialized thin film photovoltaic technology and has intrinsically better temperature coefficients, energy yield, and degradation rates than Si technologies. More than 30 GW peak (GWp) of CdTe-based modules are installed worldwide, multiple companies are in production, modules are shipping at up to 18.6% efficiency, and lab cell efficiency is above 22%. We review developments in the science and technology that have occurred over approximately the past decade. These achievements were enabled by manufacturing innovations and scaling module production, as well as maximizing photocurrent through window layer optimization and alloyed CdSe x Te 1-x (CST) absorbers. Improved chlorine passivation processes, film microstructure, and serendipitous Se defect passivation significantly increased minority carrier lifetime. Efficiencies >22% have been realized for both Cu and As doped CST-based cells. The path to further efficiency gains hinges primarily on increasing open circuit voltage (V oc ) and fill factor (FF) through innovations in materials, fabrication methods, and device stacks. Replacing the longstanding Cu doping with As doping is resulting in better module stability and is being translated to large-scale production. To realize 25% efficiency and >1 V V oc , research and development is needed to increase the minority carrier lifetime beyond 100 ns, reduce grain boundary and interface recombination, and tailor band diagrams at the front and back interfaces. Many of these goals have been realized separately however combining them together using scalable manufacturing approaches has been elusive to date. We review these achievements and outstanding opportunities for this remarkable photovoltaic technology.

14 SOLAR ENERGY↗

First-principles treatment of Mott insulators: linearized QSGW+DMFT approach

The theoretical understanding of emergent phenomena in quantum materials is one of the greatest challenges in condensed matter physics. In contrast to simple materials such as noble metals and semiconductors, macroscopic properties of quantum materials cannot be predicted by the properties of individual electrons. One of the examples of scientific importance is strongly correlated electron system. Neither localized nor itinerant behaviors of electrons in partially filled 3d, 4f, and 5f orbitals give rise to rich physics such as Mott insulators, high-temperature superconductors, and superior thermoelectricity, but hinder quantitative understanding of low-lying excitation spectrum. Here we present a new first-principles approach to strongly correlated solids. It is based on a combination of the quasiparticle self-consistent GW approximation and the dynamical mean-field theory. The sole input in this method is the projector to the set of correlated orbitals for which all local Feynman graphs are being evaluated. For that purpose, we choose very localized quasiatomic orbitals spanning large energy window, which contains most strongly hybridized bands, as well as upper and lower Hubbard bands. The self-consistency is carried out on the Matsubara axis. This method enables the first-principles study of Mott insulators in both their paramagnetic and antiferromagnetic phases. We illustrate the method on the archetypical charge transfer correlated insulators La 2 CuO 4 and NiO, and obtain spectral properties and magnetic moments in good agreement with experiments.

36 MATERIALS SCIENCE↗

Modelling and simulation of a porous core photonic crystal fibre for terahertz wave propagation

A porous core photonic crystal fibre based on conventional hexagonal lattice cladding is proposed for propagating terahertz radiation. The structure is designed and theoretically investigated using full vectorial finite element method. Simulation results show that at 300 µm core diameter, with a high porosity of 85%, and an operating frequency of 1.3 THz, the proposed fibre reduces the bulk absorption loss of cyclic olefin copolymer (TOPAS) by about 81%, which corresponds to an ultra-low effective material loss value of 0.039 cm{sup −1}. Furthermore, the proposed fibre shows near zero dispersion coefficient of 0.47 ps/THz/cm with an extremely small variation of 0.05 over a broad 1.3 THz bandwidth; with confinement and bending losses investigated and found to be negligibly low. It is anticipated that the proposed waveguide can potentially be used for short range transmission of terahertz radiation in the communication window.

42 ENGINEERING↗

Growth and properties of crystalline barium oxide on the GaAs(100) substrate

Growing a crystalline oxide film on III-V semiconductor renders possible approaches to improve operation of electronics and optoelectronics heterostructures such as oxide/semiconductor junctions for transistors and window layers for solar cells. We demonstrate the growth of crystalline barium oxide (BaO) on GaAs(100) at low temperatures, even down to room temperature. Photoluminescence (PL) measurements reveal that the amount of interface defects is reduced for BaO/GaAs, compared to Al{sub 2}O{sub 3}/GaAs, suggesting that BaO is a useful buffer layer to passivate the surface of the III-V device material. PL and photoemission data show that the produced junction tolerates the post heating around 600 °C.

36 MATERIALS SCIENCE↗

a-Si{sub x}C{sub 1−x}:H thin films with subnanometer surface roughness for biological applications

The characterization of a-Si{sub x}C{sub 1−x}:H thin films by plasma-enhanced chemical vapor deposition with high hydrogen dilution for biological applications is addressed. A root mean square roughness less than 1 nm was measured via atomic force microscopy for an area of 25 μm{sup 2}. Structural analysis was done using Fourier transform infrared spectroscopy in the middle infrared region. It was found that under the deposition conditions, the formation of Si–C bonds is promoted. Electrical dark conductivity measurements were performed to evaluate the effect of high hydrogen dilution and to find the relation between carrier transport properties and the structural arrangement. Conductivities of the order of 10{sup −7} to 10{sup −9} S/cm at room temperature for methane–silane gas flow ratio from 0.35 to 0.85 were achieved, respectively. UV-visible spectra were used to obtain the optical band gap and the Tauc parameter. Optical band gap as wide as 3.55 eV was achieved in the regime of high carbon incorporation. Accordingly, deposition under low power density and high hydrogen dilution reduces the roughness, improves the structure of the network, and stabilizes the film properties as a greater percentage of carbon is incorporated. The biofunctionalization of a-Si{sub x}C{sub 1−x}:H surfaces with NH{sub 2}-terminated self-assembled monolayers was obtained through silanization with 3-aminopropyltrimethoxysilane. This knowledge opens a window for the inclusion of these a-Si{sub x}C{sub 1−x}:H thin films in devices such as biosensors.

36 MATERIALS SCIENCE↗

Evaluation of Sulfur 'Concrete' for Use as a Construction Material on the Lunar Surface

Combining molten sulfur with any number of aggregate materials forms, when solid, a mixture having attributes similar, if not better, to conventional water-based concrete. As a result the use of sulfur "concrete" on Earth is well established, particularly in corrosive environments. Consequently, discovery of troilite (FeS) on the lunar surface prompted numerous scenarios about its reduction to elemental sulfur for use, in combination with lunar regolith, as a potential construction material; not requiring water, a precious resource, for its manufacture is an obvious advantage. However, little is known about the viability of sulfur concrete in an environment typified by extreme temperatures and essentially no atmosphere. The experimental work presented here evaluates the response of pure sulfur and sulfur concrete subjected to laboratory conditions that approach those expected on the lunar surface, the results suggesting a narrow window of application.

Grugel, R. N.↗

Apparatus and method for the characterization of respirable aerosols

An apparatus for the characterization of respirable aerosols, including: a burn chamber configured to selectively contain a sample that is selectively heated to generate an aerosol; a heating assembly disposed within the burn chamber adjacent to the sample; and a sampling segment coupled to the burn chamber and configured to collect the aerosol such that it may be analyzed. The apparatus also includes an optional sight window disposed in a wall of the burn chamber such that the sample may be viewed during heating. Optionally, the sample includes one of a Lanthanide, an Actinide, and a Transition metal.

36 MATERIALS SCIENCE↗

Multi-Level Structural Damage Characterization Using Sparse Acoustic Sensor Networks and Knowledge Transferred Deep Learning

Standard structural health monitoring techniques face well-known difficulties for comprehensive defect diagnosis in real-world structures that have structural, material, or geometric complexity. This motivates the exploration of machine-learning-based structural health monitoring methods in complex structures. However, creating sufficient training data sets with various defects is an ongoing challenge for data-driven machine (deep) learning algorithms. The ability to transfer the knowledge of a trained neural network from one component to another or to other sections of the same component would drastically reduce the required training data set. Also, it would facilitate computationally inexpensive machine learning based inspection systems. In this work, a machine-learning-based multi-level damage characterization is demonstrated with the ability to transfer trained knowledge within the sparse sensor network. A novel network spatial assistance and an adaptive convolution technique are proposed for efficient knowledge transfer within the deep learning algorithm. Proposed structural health monitoring method is experimentally evaluated on an aluminum plate with artificially induced defects. It was observed that the method improves the performance of knowledge transferred damage characterization by 50% during localization and 24% during severity assessment. Further, experiments using time windows with and without multiple edge reflections are studied. Results reveal that multiply scattered waves contain rich and deterministic defect signatures that can be mined using deep learning neural networks, improving the accuracy of both identification and quantification. In the case of a fixed sensor network, using multiply scattered waves shows 100% prediction accuracy at all levels of damage characterization.

36 MATERIALS SCIENCE↗