Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

A compact dication source for Ba 2+ tagging and heavy metal ion sensor development

Here, we present a tunable metal ion beam that delivers controllable ion currents in the picoamp range for testing of dry-phase ion sensors. Ion beams are formed by sequential atomic evaporation and single or multiple electron impact ionization, followed by acceleration into a sensing region. Controllability of the ionic charge state is achieved through tuning of electrode potentials that influence the retention time in the ionization region. Barium, lead, and cadmium samples have been used to test the system, with ion currents identified and quantified using a quadrupole mass analyzer. Realization of a clean Ba 2+ ion beam within a bench-top system represents an important technical advance toward the development and characterization of barium tagging systems for neutrinoless double beta decay searches in xenon gas. This system also provides a testbed for investigation of novel ion sensing methodologies for environmental assay applications, with dication beams of Pb 2+ and Cd 2+ also demonstrated for this purpose.

47 OTHER INSTRUMENTATION↗

Impact of hydrogenation on the stability and mechanical properties of amorphous boron nitride

Abstract Interconnect materials with ultralow dielectric constant, and good thermal and mechanical properties are crucial for the further miniaturization of electronic devices. Recently, it has been demonstrated that ultrathin amorphous boron nitride (aBN) films have a very low dielectric constant, high density (above 2.1 g cm −3 ), high thermal stability, and mechanical properties. The excellent properties of aBN derive from the nature and degree of disorder, which can be controlled at fabrication, allowing tuning of the physical properties for desired applications. Here, we report an improvement in the stability and mechanical properties of aBN upon hydrogen doping. With the introduction of a Gaussian approximation potential for atomistic simulations, we investigate the changing morphology of aBN with varying H doping concentrations. We found that for 8 at% of H doping, the concentration ofsp 3 -hybridized atoms reaches to a maximum which leads to an improvement of thermal stability and mechanical properties by 20%. These results will be a guideline for experimentalists and process engineers to tune the growth conditions of aBN films for numerous applications.

Materials Science↗

Hydride-based thermal energy storage

Abstract The potential and research surrounding metal hydride (MH) based thermal energy storage is discussed, focusing on next generation thermo-chemical energy storage (TCES) for concentrated solar power. The site availability model to represent the reaction mechanisms of both the forward and backward MH reaction is presented, where this model is extrapolated to a small pilot scale reactor, detailing how a TCES could function/operate in a real-world setting using a conventional shell & tube reactor approach. Further, the important parameter of effective thermal conductivity is explored using an innovative multi-scale model, to providing extensive and relevant experimental data useful for reactor and system design. Promising high temperature MH material configurations may be tuned by either destabilisation, such as using additions to Ca and Sr based hydrides, or by stabilisation, such as fluorine addition to NaH, MgH 2 , or NaMgH 3 . This versatile thermodynamic tuning is discussed, including the challenges in accurately measuring the material characteristics at elevated temperatures (500 –700 °C). Attention to scale up is explored, including generic design and prototype considerations, and an example of a novel pilot-scale pillow-plate reactor currently in development; where materials used are discussed, overall tank design scope and system integration.

25 ENERGY STORAGE↗

Joint ptycho-tomography with deep generative priors

Abstract Joint ptycho-tomography is a powerful computational imaging framework to recover the refractive properties of a 3D object while relaxing the requirements for probe overlap that is common in conventional phase retrieval. We use an augmented Lagrangian scheme for formulating the constrained optimization problem and employ an alternating direction method of multipliers (ADMM) for the joint solution. ADMM allows the problem to be split into smaller and computationally more efficient subproblems: ptychographic phase retrieval, tomographic reconstruction, and regularization of the solution. We extend our ADMM framework with plug-and-play (PnP) denoisers by replacing the regularization subproblem with a general denoising operator based on machine learning. While the PnP framework enables integrating such learned priors as denoising operators, tuning of the denoiser prior remains challenging. To overcome this challenge, we propose a denoiser parameter to control the effect of the denoiser and to accelerate the solution. In our simulations, we demonstrate that our proposed framework with parameter tuning and learned priors generates high-quality reconstructions under limited and noisy measurement data.

97 MATHEMATICS AND COMPUTING↗

SIDDA: SInkhorn Dynamic Domain Adaptation for image classification with equivariant neural networks

Modern neural networks (NNs) often do not generalize well in the presence of a ‘covariate shift’; that is, in situations where the training and test data distributions differ, but the conditional distribution of classification labels given the data remains unchanged. In such cases, NN generalization can be reduced to a problem of learning more robust, domain-invariant features. Domain adaptation (DA) methods include a broad range of techniques aimed at achieving this; however, these methods have struggled with the need for extensive hyperparameter tuning, which then incurs significant computational costs. In this work, we introduce SInkhorn Dynamic Domain Adaptation (SIDDA), an out-of-the-box DA training algorithm built upon the Sinkhorn divergence, that can achieve effective domain alignment with minimal hyperparameter tuning and computational overhead. We demonstrate the efficacy of our method on multiple simulated and real datasets of varying complexity, including simple shapes, handwritten digits, real astronomical observations, and remote sensing data. These datasets exhibit covariate shifts due to noise, blurring, differences between telescopes, and variations in imaging wavelengths. SIDDA is compatible with a variety of NN architectures, and it works particularly well in improving classification accuracy and model calibration when paired with symmetry-aware equivariant NNs (ENNs). We find that SIDDA consistently enhances the generalization capabilities of NNs, achieving up to a ${\approx}40\%$ improvement in classification accuracy on unlabeled target data, while also providing a more modest performance gain of $\lesssim 1\%$ on labeled source data. We also study the efficacy of DA on ENNs with respect to the varying group orders of the dihedral group DN, and find that the model performance improves as the degree of equivariance increases. Finally, if SIDDA achieves proper domain alignment, it also enhances model calibration on both source and target data, with the most significant gains in the unlabeled target domain—achieving over an order of magnitude improvement in the expected calibration error and Brier score. SIDDA’s versatility across various NN models and datasets, combined with its automated approach to domain alignment, has the potential to significantly advance multi-dataset studies by enabling the development of highly generalizable models.

79 ASTRONOMY AND ASTROPHYSICS↗

Inverse model based error detection in beamline optics

Optics tuning in transfer lines and LINACs can be challenging due to the fact that multiple combinations of machine settings can lead to the same diagnostic output. Moreover, the lack of a periodic solution can limit the ability to infer optics in the same way as rings from BPM signals. Model based approaches are often used to assist with the optics tuning in combination with optimization or parameter estimation. Here we have developed a novel approach using machine learning inverse models trained on a known configuration to detect variations in quadrupole settings without explicitly including them in the model. This paper shows a comparison of neural network models and linear models on both a simulation based study and experimental studies conducted at the AGS to RHIC transfer line at Brookhaven National Lab.

43 PARTICLE ACCELERATORS↗

Towards a self-driving trigger at the LHC: adaptive response in real time

Real-time data filtering and selection—or trigger—systems at high-throughput scientific facilities such as the experiments at the Large Hadron Collider must process extremely high-rate data streams under stringent bandwidth, latency, and storage constraints. Yet these systems are typically designed as static, hand-tuned menus of selection criteria grounded in prior knowledge and simulation. In this work, we further explore the concept of a self-driving trigger, an autonomous data-filtering framework that reallocates resources and adjusts thresholds dynamically in real-time to optimize signal efficiency, rate stability, and computational cost as instrumentation and environmental conditions evolve. We introduce a benchmark ecosystem to emulate realistic collider scenarios and demonstrate real-time optimization of a menu including canonical energy sum triggers as well as modern anomaly-detection algorithms that target non-standard event topologies using machine learning. Using simulated data streams and publicly available collision data from the Compact Muon Solenoid experiment, we demonstrate the capability to dynamically and automatically optimize trigger performance under specific cost objectives without manual retuning. Our adaptive strategy shifts trigger design from static menus with heuristic tuning to intelligent, automated, data-driven control, unlocking greater flexibility and discovery potential in future high-energy physics analyses.

Emami, Shaghayegh [Michigan U.] (ORCID:00090007589↗

Optimal dynamic control for a maglev vehicle moving on multi-span guideway girders

Abstract An optimal control algorithm using a virtual tuned mass damper called virtual TMD to control the levitation force of a magnetic system is developed for resonance suppression of a maglev vehicle moving on multi-span guideway girders. Since the optimal dynamic parameters of a TMD in vibration control are well developed, the optimal tuning gains required to control the magnetic oscillations of the maglev bogie can be directly used and fed back to the maglev control system. To address the dynamic interaction analysis from the maglev vehicle to the guideway girders and vice versa, the entire coupling system is decomposed into two subsystems, one is the moving vehicle subsystem and another the stationary guideway subsystem. Then, an incremental–iterative procedure associated with the Newmark method is presented to solve the two sets of subsystem equations. Finally, the control effectiveness and parametric studies of the optimal virtual TMD scheme on resonance reduction of the moving maglev vehicle are demonstrated.

Liu, Linya↗

Towards an astronomical foundation model for stars with a transformer-based model

ABSTRACT Rapid strides are currently being made in the field of artificial intelligence using transformer-based models like Large Language Models (LLMs). The potential of these methods for creating a single, large, versatile model in astronomy has not yet been explored. In this work, we propose a framework for data-driven astronomy that uses the same core techniques and architecture as used by LLMs. Using a variety of observations and labels of stars as an example, we build a transformer-based model and train it in a self-supervised manner with cross-survey data sets to perform a variety of inference tasks. In particular, we demonstrate that a single model can perform both discriminative and generative tasks even if the model was not trained or fine-tuned to do any specific task. For example, on the discriminative task of deriving stellar parameters from Gaia XP spectra, we achieve an accuracy of 47 K in Teff, 0.11 dex in log g, and 0.07 dex in [M/H], outperforming an expert XGBoost model in the same setting. But the same model can also generate XP spectra from stellar parameters, inpaint unobserved spectral regions, extract empirical stellar loci, and even determine the interstellar extinction curve. Our framework demonstrates that building and training a single foundation model without fine-tuning using data and parameters from multiple surveys to predict unmeasured observations and parameters is well within reach. Such ‘Large Astronomy Models’ trained on large quantities of observational data will play a large role in the analysis of current and future large surveys.

Leung, Henry W. (ORCID:0000000200362752)↗

Regulating off-centering distortion maximizes photoluminescence in halide perovskites

Abstract Metal halide perovskites possess unique atomic and electronic configurations that endow them with high defect tolerance and enable high-performance photovoltaics and optoelectronics. Perovskite light-emitting diodes have achieved an external quantum efficiency of over 20%. Despite tremendous progress, fundamental questions remain, such as how structural distortion affects the optical properties. Addressing their relationships is considerably challenging due to the scarcity of effective diagnostic tools during structural and property tuning as well as the limited tunability achievable by conventional methods. Here, using pressure and chemical methods to regulate the metal off-centering distortion, we demonstrate the giant tunability of photoluminescence (PL) in both the intensity (>20 times) and wavelength (>180 nm/GPa) in the highly distorted halide perovskites [CH3NH3GeI3, HC(NH2)2GeI3, and CsGeI3]. Using advanced in situ high-pressure probes and first-principles calculations, we quantitatively reveal a universal relationship whereby regulating the level of off-centering distortion towards 0.2 leads to the best PL performance in the halide perovskites. By applying this principle, intense PL can still be induced by substituting CH3NH3+ with Cs+ to control the distortion in (CH3NH3)1-xCsxGeI3, where the chemical substitution plays a similar role as external pressure. The compression of a fully substituted sample of CsGeI3 further tunes the distortion to the optimal value at 0.7 GPa, which maximizes the emission with a 10-fold enhancement. This work not only demonstrates a quantitative relationship between structural distortion and PL property of the halide perovskites but also illustrates the use of knowledge gained from high-pressure research to achieve the desired properties by ambient methods.

halide perovskites↗

Manipulating high-temperature superconductivity by oxygen doping in Bi2Sr2CaCu2O8+δ thin flakes

Abstract Harnessing the fascinating properties of correlated oxides requires precise control of their carrier density. Compared to other methods, oxygen doping provides an effective and more direct way to tune the electronic properties of correlated oxides. Although several approaches, such as thermal annealing and oxygen migration, have been introduced to change the oxygen content, a continuous and reversible solution that can be integrated with modern electronic technology is much in demand. Here, we report a novel ionic field-effect transistor using solid Gd-doped CeO2 as the gate dielectric, which shows a remarkable carrier-density-tuning ability via electric-field-controlled oxygen concentration at room temperature. In Bi2Sr2CaCu2O8+δ (Bi-2212) thin flakes, we achieve a reversible superconductor–insulator transition by driving oxygen ions in and out of the samples with electric fields, and map out the phase diagram all the way from the insulating regime to the over-doped superconducting regime by continuously changing the oxygen doping level. Scaling analysis indicates that the reversible superconductor–insulator transition for the Bi-2212 thin flakes follows the theoretical description of a two-dimensional quantum phase transition. Our work provides a route for realizing electric-field control of phase transition in correlated oxides. Moreover, the configuration of this type of transistor makes heterostructure/interface engineering possible, thus having the potential to serve as the next-generation all-solid-state field-effect transistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seeing through noise in power laws

Despite widespread claims of power laws across the natural and social sciences, evidence in data is often equivocal. Modern data and statistical methods reject even classic power laws such as Pareto’s law of wealth and the Gutenberg–Richter law for earthquake magnitudes. We show that the maximum-likelihood estimators and Kolmogorov–Smirnov (K-S) statistics in widespread use are unexpectedly sensitive to ubiquitous errors in data such as measurement noise, quantization noise, heaping and censorship of small values. This sensitivity causes spurious rejection of power laws and biases parameter estimates even in arbitrarily large samples, which explains inconsistencies between theory and data. We show that logarithmic binning by powers of λ > 1 attenuates these errors in a manner analogous to noise averaging in normal statistics and that λ thereby tunes a trade-off between accuracy and precision in estimation. Binning also removes potentially misleading within-scale information while preserving information about the shape of a distribution over powers of λ, and we show that some amount of binning can improve sensitivity and specificity of K-S tests without any cost, while more extreme binning tunes a trade-off between sensitivity and specificity. We therefore advocate logarithmic binning as a simple essential step in power-law inference.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Gate-tunable enhancement of supercurrent in hybrid planar Josephson junctions

Planar Josephson junctions (JJs) have emerged as a promising platform for the realization of topological superconductivity and Majorana zero modes. To obtain robust quasi one-dimensional (1D) topological superconducting states using planar JJs, limiting the number of 1D Andreev bound states’ subbands that can be present, and increasing the size of the topological superconducting gap are two fundamental challenges. It has been suggested that both problems can be addressed by properly designing the interfaces between the JJ’s normal region and the superconducting leads. We fabricated Josephson junctions with periodic hole structures on the superconducting contact leads on InAs heterostructures with epitaxial superconducting Al. By depleting the chemical potential inside the holes region with a top gate, we observed an enhancement of the supercurrent across the junction. The theoretical analysis shows that the enhancement of the JJ’s critical current is achieved when the depletion of the holes is such to optimize the matching of quasiparticles’ wave function at the normal/superconductor interface. Furthermore, these results show how the combination of carefully designed patterns for the Al coverage, and external gates, can be successfully used to tune the density and wave functions’ profiles in the normal region of the JJ, and therefore open an avenue to tune some of the critical properties, such as number of subbands and size of the topological gap, that must be optimized to obtain robust quasi-1D superconducting states supporting Majorana bound states.

Bogoliubov-de Gennes equations↗

Effects of chemical disorder and spin-orbit coupling on the electronic-structure and Fermi-surface topology of YbSb-based monopnictides

Here, in this work, we study the influence of disorder on the electronic structure of YbSb—a rare-earth monopnictide featuring a simple rocksalt (B1) crystal structure and a well-defined Fermi-surface topology—by employing first-principles density-functional theory. We focus on chemical disorder introduced through Te and Al doping, selected based on their thermodynamic stability in alloyed configurations, to understand how such perturbations modify the electronic states of YbSb. Our results indicate that Te doping predominantly introduces electronlike states at the 𝑋 and 𝐿 points, while Al doping leads to a suppression of holelike states at Γ, effectively driving the system from a semimetallic state to one characterized by very narrow-gap behavior at Γ. This modulation of the Fermi surface, particularly the reduction of central hole pockets at Γ, plays a central role in altering interpocket scattering—a mechanism critical for tuning quantum transport properties, including superconductivity. This disorder-driven modulation of the Fermi surface, particularly the suppression of central hole pockets at Γ, controls interpocket scattering, which is essential for optimizing quantum transport properties, including superconductivity. Our results show that disorder can be effectively used for engineering band topology, thereby tuning quantum related response through a tailored electronic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of the kagome compound CaTi 3⁢ Bi 4 using high-field torque magnetometry and density functional theory

Here, we report systematic torque magnetometry measurements to investigate the electronic properties of the newly discovered kagome compound CaTi 3 ⁢Bi 4 . Electrical transport, magnetic susceptibility, and thermal measurements reveal no evidence of a magnetic ground state in this material. Torque data obtained in magnetic fields up to 41.5 T exhibit clear de Haas–van Alphen (dHvA) oscillations, with nine distinct frequencies ranging from 13 to 6164 T. Angular-dependent dHvA measurements show that, with the exception of the lowest frequency (13 T), all observed frequencies nearly follow a 1/cos ⁡𝜃 dependence, where 𝜃 is the angle between the crystallographic 𝑐 axis and the magnetic field direction. This behavior is characteristic of quasi-two-dimensional Fermi-surface sheets with nearly circular cross sections. To further elucidate the electronic structure, we performed density functional theory (DFT) calculations of the band structure and Fermi surface. The calculated bands reveal the presence of multiple Dirac points (DP), flat bands (FB), and van Hove singularities (VHS) near the Fermi level. The resulting Fermi surface consists of several quasi-two-dimensional cylindrical sheets, consistent with the experimentally observed 1/cos⁡ 𝜃 dependence. Notably, the theoretical dHvA frequencies, derived from extremal Fermi-surface cross-sectional areas, agree well with the experimental values and reproduce their angular dependence. Remarkably, all experimentally observed frequencies are captured by the DFT predictions. Pressure-dependent calculations up to 10 GPa show that the electronic features—DP, FB, and VHS—evolve systematically with pressure. In particular, the VHS shifts closer to the Fermi level, demonstrating that pressure acts as an effective tuning parameter in this material. These combined experimental and theoretical results provide a comprehensive understanding of the electronic structure of CaTi 3 ⁢Bi 4 and demonstrate how pressure can be used to tune its key electronic features, offering valuable guidance for exploring related kagome materials.

Shtefiienko, Kyryl [West Texas A & M University, C↗

Interlayer Exciton Condensates between Second Landau Level Orbitals in Double Bilayer Graphene

Here, we present Coulomb-drag measurements on a heterostructure comprising two Bernal-stacked bilayer graphene (BLG) sheets separated by a 2.5 nm hexagonal boron nitride (hBN) spacer in the quantum Hall (QH) regime. Using top and bottom gate control, together with an interlayer bias, we independently tune the two BLG layers into either the lowest (N = 0) or second (N = 1) Landau level (LL) orbital and probe their interlayer QH states. When both layers occupy the N = 0 orbital, we observe both interlayer exciton condensates (ECs) at integer total filling and interlayer fractional QH states, echoing the results in double monolayer graphene. In contrast to previous studies, however, when both BLG layers occupy the N = 1 orbital, we also observe quantized drag signals, signifying an interlayer exciton condensate formed between the second LLs. By tuning the layer degree of freedom, we find that this N = 1 EC state arises only when the N = 1 wave function in each BLG is polarized toward the hBN interface to maximize the interlayer Coulomb interaction.

Electrical conductivity↗

Magnetic field dependence of the spin fluctuations in CeCu 5.8 ⁢Ag 0.2

Quantum phase transitions are among the most intriguing phenomena that can occur when the electronic ground state of correlated metals are tuned by external parameters such as pressure, magnetic field, or chemical substitution. Such transitions between distinct states of matter are driven by quantum fluctuations, and can give rise to macroscopically coherent phases that are at the forefront of condensed matter research. However, the nature of the critical fluctuations, and thus the fundamental physics controlling many quantum phase transitions, remain poorly understood in numerous strongly correlated metals. Here we study the model material CeCu 5.8⁢ Ag 0.2 to gain insight into the implications of critical fluctuations originating from different regions in reciprocal space. By employing an external magnetic field along the crystallographic 𝑎 and 𝑐 axis as auxiliary tuning parameter, we observe a pronounced anisotropy in the suppression of the quantum critical fluctuations, reflecting the spin anisotropy of the long-range ordered ground state at larger silver concentration. Coupled with the temperature dependence of the quantum fluctuations, these results suggest that the quantum phase transition in CeCu 5.8⁢ Ag 0.2 is driven by three-dimensional spin-density wave fluctuations.

Boraley, Xavier [Paul Scherrer Inst. (PSI), Villig↗

Critical structural parameter determining magnetic phases in the F⁡e 2 ⁢M⁢o 3 ⁢O 8 altermagnet system

A systematic structural investigation of F⁡e 2 ⁢M⁢o 3⁢ O 8 as a function of pressure, temperature, and magnetic field reveals that the 𝑃⁢6 3 ⁢𝑚⁢𝑐 space group remains robust over a wide range of conditions. No changes in the long-range crystal structure are observed for pressures up to 10 GPa, temperatures between 11 K and 300 K, and magnetic fields up to 9 T. The magnetostructural response, quantified by Δ⁢𝑐/𝑐, is determined for magnetic fields applied transverse to the crystallographic 𝑐 axis, demonstrating strong magnetoelastic coupling. The well-known magnetic-field-induced transition is confirmed to be first order and isostructural, occurring between two distinct altermagnetic states. Importantly, this transition can also be accessed using magnetic fields applied within the 𝑎𝑏 plane. When expressed in terms of the 𝑐/𝑎 ratio, the structural evolution under pressure (0–10 GPa) maps continuously onto that observed across the full Zn substitution range in (F⁡e 1−𝑦⁢ Z⁢n 𝑦 )2 M⁢o 3 ⁢O 8 ⁢(0 ≤ 𝑦 ≤ 1), indicating a common underlying structural control parameter. Furthermore, these results demonstrate that the 𝑐-axis lattice parameter is the primary structural degree of freedom governing magnetic behavior under external tuning parameters. More broadly, they indicate that magnetic order in this family of complex oxides (𝐴 2 ⁢M⁢o 3 ⁢O 8 , 𝐴 = Co,Mn,Ni) can be systematically tuned via pressure. This tunability highlights these materials as promising platforms for controllable magnetic switching, particularly in thin films integrated with piezoelectric substrates.

36 MATERIALS SCIENCE↗