Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transportation Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Moisture Monitoring at Area G, Technical Area 54, Los Alamos National Laboratory, 2016 Status Report

Hydrological characterization and moisture monitoring activities provide data required for evaluating the transport of subsurface contaminants in the unsaturated and saturated zones beneath Area G, and for the Area G Performance Assessment and Composite Analysis. These activities have been ongoing at Area G, Technical Area 54 of the Los Alamos National Laboratory since waste disposal operations began in 1957. This report summarizes the hydrological characterization and moisture monitoring activities conducted at Area G. It includes moisture monitoring data collected from 1986 through 2016 from numerous boreholes and access tubes with neutron moisture meters, as well as data collected by automated dataloggers for water content measurement sensors installed in a waste disposal pit cover, and buried beneath the floor of a waste disposal pit. This report is an update of a nearly identical report by Levitt et al., (2015) that summarized data collected through early 2015; this report includes additional moisture monitoring data collected at Pit 31 and the Pit 38 extension through December, 2016. It also includes information from the Jennings and French (2009) moisture monitoring report and includes all data from Jennings and French (2009) and the Draft 2010 Addendum moisture monitoring report (Jennings and French, 2010). For the 2015 version of this report, all neutron logging data, including neutron probe calibrations, were investigated for quality and pedigree. Some data were recalculated using more defensible calibration data. Therefore, some water content profiles are different from those in the Jennings and French (2009) report. All of that information is repeated in this report for completeness. Monitoring and characterization data generally indicate that some areas of the Area G vadose zone are consistent with undisturbed conditions, with water contents of less than five percent by volume in the top two layers of the Bandelier tuff at Area G. These data also indicate that other areas of the vadose zone are affected by waste disposal activities that have been ongoing at Area G since 1957, a period of nearly 60 years. In some areas, water content profiles indicate increases in water content to depths of tens of meters, especially in areas covered by asphalt and structures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Risk-Informed Maritime Spent Fuel Transportation

South Korea is facing a shortage of Spent Nuclear Fuel (SNF) storage space. The country generates approximately 760 metric tons of SNF annually out of its 23 Nuclear Power Plants (NPPs). Until any terminal solutions of the back-end fuel cycle is decided, there exists the need to relocate these SNF assemblies from relatively packed storage pools to the more vacant ones. Since NPPs in South Korea are situated at coastal sites, the maritime mode of transportation is more practical for this purpose in comparison to land and air ones. The primary risk factors in this transportation mode, based on the data collected by the Korea Maritime Institute from 1981 until 2013, are ship collision and engine damage. However, because ship collision may initiate other accident types such as sinking, fire or engine damage, it may be considered as the most hazardous event. It is therefore a significant interest to calculate the likelihood of this event. This paper proposes a risk assessment methodology on the maritime SNF transportation in the form of the quantification of ship collision probability. To demonstrate the applicability of the methodology, a transportation case study in South Korea is presented. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The electric vehicles-solar photovoltaics Nexus: Driving cross-sectoral adoption of sustainable technologies

Residential and transportation energy consumption account for more than one-half of the overall energy consumption in the United States. Adoption of electric vehicles (EVs) can play a key role in decarbonizing the transportation sector, while the adoption of renewable energy sources (e.g., solar photovoltaics [PVs]) could bring similar benefits to the residential energy sector and in turn support transport electrification. Although the market shares for both EVs and PVs continue to grow, both of these emerging technologies are deployed rather disjointly, without considering the existence of potential similarities among users who own (or aspire to own) these technologies. This might be due to lack of understanding of the behavioral interdependence in consumer preferences toward these technologies. To fill this gap in knowledge, this study utilizes data from the 2018 WholeTraveler Transportation Behavior Study to develop an integrated model system that explores interactive EV and PV adoption behaviors. A structural equation model is employed that incorporates direct effects as well as error correlations among the adoption behaviors for EVs and PVs. Model results indicate that the adoption behavior for both these technologies is indeed interconnected and significantly influenced by attitudes, values, and personality traits. Findings from this research suggest that incentives (e.g., subsidies) that drive bundled adoption of EV-PV systems could accelerate the adoption of both of these sustainable technologies. In conclusion, this study highlights the need to consider transport and building energy-efficient technology adoption behavior in a single integrated structure.

14 SOLAR ENERGY↗

Is the Adoption of Electric Vehicles (EVs) and Solar Photovoltaics (PVs) Interdependent or Independent? An Integrated EVs-PVs Modeling Framework

Transportation and residential energy consumption account for more than one-half of the overall energy consumption in the United States. Adoption of electric vehicles (EVs) can play a key role in decarbonizing the transportation sector, while the adoption of renewable energy sources (e.g., solar photovoltaics or PVs) could bring similar benefits to the residential energy sector and in turn support transport electrification. Although the market share for both EVs and PVs continue to grow, both these emerging technologies are deployed rather disjoint without considering the existence of potential similarities among users who own (or aspire to own) EVs and PVs. This might be due to lack of understanding of the behavioral interdependence in consumer preferences towards these technologies. To fill this gap in knowledge, this study utilizes data from the 2018 WholeTraveler Transportation Behavior Study to develop an integrated model system that explores EV and PV adoption behaviors. A structural equations model (SEM) is employed that incorporates direct effects as well as error correlations among the adoption behaviors for EVs and PVs. Model results indicate that the adoption behavior for both these technologies is indeed interconnected and significantly influenced by attitudes, values and personality traits. Findings from this research suggest that incentives (e.g., subsidies) that drive 'bundled' adoption of EVs and PVs could accelerate the adoption of both these sustainable technologies. The results highlights the need to consider transport and building energy efficient technology adoption behavior in a single integrated structure.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

MRP2 and the handling of mercuric ions in rats exposed acutely to inorganic and organic species of mercury

Mercuric ions accumulate preferentially in renal tubular epithelial cells and bond with intracellular thiols. Certain metal-complexing agents have been shown to promote extraction of mercuric ions via the multidrug resistance-associated protein 2 (MRP2). Following exposure to a non-toxic dose of inorganic mercury (Hg{sup 2+}), in the absence of complexing agents, tubular cells are capable of exporting a small fraction of intracellular Hg{sup 2+} through one or more undetermined mechanisms. We hypothesize that MRP2 plays a role in this export. To test this hypothesis, Wistar (control) and TR{sup -} rats were injected intravenously with a non-nephrotoxic dose of HgCl{sub 2} (0.5 {mu}mol/kg) or CH{sub 3}HgCl (5 mg/kg), containing [{sup 203}Hg], in the presence or absence of cysteine (Cys; 1.25 {mu}mol/kg or 12.5 mg/kg, respectively). Animals were sacrificed 24 h after exposure to mercury and the content of [{sup 203}Hg] in blood, kidneys, liver, urine and feces was determined. In addition, uptake of Cys-S-conjugates of Hg{sup 2+} and methylmercury (CH{sub 3}Hg{sup +}) was measured in inside-out membrane vesicles prepared from either control Sf9 cells or Sf9 cells transfected with human MRP2. The amount of mercury in the total renal mass and liver was significantly greater in TR{sup -} rats than in controls. In contrast, the amount of mercury in urine and feces was significantly lower in TR{sup -} rats than in controls. Data from membrane vesicles indicate that Cys-S-conjugates of Hg{sup 2+} and CH{sub 3}Hg{sup +} are transportable substrates of MRP2. Collectively, these data indicate that MRP2 plays a role in the physiological handling and elimination of mercuric ions from the kidney.

60 APPLIED LIFE SCIENCES↗

One-Dimensional Edge Transport in Few-Layer WTe 2

WTe 2 is a layered transitional-metal dichalcogenide (TMD) with a number of intriguing topological properties. Recently, WTe 2 has been predicted to be a higher-order topological insulator (HOTI) with topologically protected hinge states along the edges. The gapless nature of WTe 2 complicates the observation of one-dimensional (1D) topological states in transport due to their small contribution relative to the bulk. Here, we study the behavior of the Josephson effect in magnetic field to distinguish edge from bulk transport. The Josephson effect in few-layer WTe 2 reveals 1D states residing on the edges and steps. Moreover, our data demonstrates a combination of Josephson transport properties observed solely in another HOTI—bismuth, including Josephson transport over micrometer distances, extreme robustness in a magnetic field, and nonsinusoidal current-phase relation (CPR). Our observations strongly suggest the topological origin of the 1D states and that few-layer WTe 2 is a HOTI.

1D edge states↗

Revised estimates of NO 2 reductions during the COVID-19 lockdowns using updated TROPOMI NO 2 retrievals and model simulations

The TROPOspheric Monitoring Instrument (TROPOMI) observed unprecedented declines in NO 2 vertical column densities (VCD) over the world's most densely populated cities during the 2020 COVID-19 lockdowns. These favorable changes in NO 2 air quality were correlated with sharp reductions in traffic volume and economic activity during the lockdowns. In this comprehensive global study, we provide revised estimates of the declines in anthropogenic emissions for 36 megacities using a novel methodology for disentangling the anthropogenic emissions from the meteorological transport and natural variability. We further quantify the uncertainty associated with changes in the a priori profile shape information during the lockdowns due to reduced emissions. Satellite NO 2 retrieval techniques calculate an air mass factor that requires a priori NO 2 profile shape information representative of the local atmosphere. This information, which is typically obtained from a chemical transport model (CTM), was not available for the early studies. This study also accounts for the satellite sampling errors resulting from the selective sampling of non-cloudy scenes during the study period. For our analysis, we used CTM simulations that were generated with and without COVID-impacted emissions. We perform retrievals of tropospheric NO 2 columns with the NASA NO 2 algorithm, and then use observed and simulated data to disentangle the meteorological transport from the contribution due anthropogenic emissions. We found that the meteorological transport was most significant source of variability ranging between −35% and 22% of the change total tropospheric VCD. We also find that not accounting for changes in the a priori NO 2 profile shape information during the lockdowns resulted in systematic retrieval errors that were up to 12% of the estimated decline, and the elimination of cloud contaminated scenes resulted in sampling errors that in general ranged between varied ±15%.

NO2↗

Development of a Comprehensive and Centralized Waste Management System - 19412

Information Systems Laboratories (ISL) has designed a new single, integrated, waste management and control system to administer all aspects of nuclear waste management. The overriding goal of the initiative is to provide federal, state, and local agencies with operational awareness, management, and programmatic support for all functions related to nuclear waste management. Over decades of waste management federal agencies have sponsored or directly paid for the development, operation, and control of multiple systems to track and control its waste - with varied success. Multiple contractors have generated disparate control systems/databases and literally mountains of data. Past approaches have not provided a single, integrated, real time data management system. ISL's analysis of past failed efforts has reveal four common symptoms: - Control/management systems that are not compatible; - Programmatic costs that increase with systems use and re-work; - Systems focused on specific sets of data; - Inaccurate or outdated data sets. An integrated waste management and control system that collects and displays real-time, accurate inventory, waste container certification, transportation certification, emplacement, and shipment related data improve operational awareness and overcomes these limitations. Using its vast knowledge and experience in developing numerous waste tracking and management systems, ISL has leveraged its own in-house knowledge and gathered requests from stakeholders all across the industry to design a system that meets the needs of users at all levels of the nuclear waste management process. Using the highly successful and widely used Waste Data System (WDS) designed for the Waste Isolation Pilot Plant as a core component, ISL has designed a system that greatly expands on the functionality of the WDS to exceed its current focus of management of Transuranic Waste shipments. The new system is designed to provide the ability to track a wide range of waste types from Transuranic, High Level, Low Level, Mixed, and any nuclear related material. The main focus of the system is to provide federal regulators a comprehensive and real-time oversight into the handling of all nuclear waste materials. Oversight activities include, but are not limited to, strategy development, projections, metrics, incentive development, tracking, budget review, government cost estimating, and integrated schedules. The major components of the system are summarized below: - The Centralized Waste Management System (CWMS), which will include assimilating and validating known sources of data into the CWMS. - The programmatic reporting support component, which will handle queries from regulators, track compliance with regulatory requirements, and maintain the dashboard for federal management. - Both the CWMS and the programmatic reporting support component will use a standard set of business rules that govern system operations and allow site and program specific needs and limits for all waste programs and types to be captured and maintained. This presentation will provide details of each component of the system detailing its use, interfaces with other components, and value to stakeholders. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Validation of electron backscattering in the MCNP6.3 code

A new electron backscattering validation suite has been developed for the MCNP® code. The calculations in this suite cover both condensed history and single-event transport methods, seven different elemental materials ranging from beryllium to uranium, and incident electron energies from 200 eV to 14.1 MeV. In general, the accuracy of the MCNP code for electron backscattering calculations is energy-dependent. For incident electron energies below 2 keV, the condensed history method is not applied while the single-event method shows poor agreement with experimental measurements due to poor accuracy of the underlying atomic data. For incident energies between 2 keV and 256 keV, the single-event method typically shows better agreement with experiments, while for incident energies above 256 keV the condensed history method gives better accuracy. Additionally, agreement with experimental data is generally worse for low- Z materials such as beryllium and carbon, which may reflect deficiencies in the data or physics underlying electron transport through light elements in the MCNP code. The new electron backscattering validation suite, along with the previously introduced electron stopping power and Lockwood energy deposition validation suites, provide MCNP users with a quantified understanding of the uncertainties in electron transport calculations. Future improvements to electron transport in the MCNP code are necessary for low energies (≤ 2 keV) and for low- Z materials.

36 MATERIALS SCIENCE↗

On the sensitivity of a residual circulation model to differences in input temperature data

The residual mean circulation (RMC) formulation of zonally averaged transport in the middle atmosphere produces a circulation which depends on the distributions of net diabatic heating and temperature. Such circulations are from two temperature data sets, using the same radiative transfer code (Rosenfield et al. 1987). These circulations are then used to transport N2O in a photochemical model. The circulations and the resulting N2O distributions are notably different during the Northern Hemisphere winter, with that based on the NMC temperatures producing too much upward transport in the tropical stratosphere, as judged by comparison with the stratospheric and mesoscale sounder data. The experiment demonstrates that model calculations, in general, and perturbation assessments, in particular, are likely to be quite sensitive to the choice of input temperature data (where this is not computed self-consistently). It also reveals what appears to be a seasonally dependent bias in NMC zonally averaged temperatures with respect to those obtained from the LIMS instrument during 1978/1979.

Guthrie, Paul D.↗

Simulation of the transport, vertical distribution, optical properties and radiative impact of smoke aerosols with the ALADIN regional climate model during the ORACLES-2016 and LASIC experiments

Estimates of the direct radiative effect (DRE) from absorbing smoke aerosols over the southeast Atlantic Ocean (SAO) require simulation of the microphysical and optical properties of stratocumulus clouds as well as of the altitude and shortwave (SW) optical properties of biomass burning aerosols (BBAs). In this study, we take advantage of the large number of observations acquired during the ObseRvations of Aerosols above Clouds and their intEractionS (ORACLES-2016) and Layered Atlantic Smoke Interactions with Clouds (LASIC) projects during September 2016 and compare them with datasets from the ALADIN-Climate (Aire Limitée Adaptation dynamique Développement InterNational) regional model. The model provides a good representation of the liquid water path but the low cloud fraction is underestimated compared to satellite data. The modeled total-column smoke aerosol optical depth (AOD) and above-cloud AOD are consistent ( ~0.7 over continental sources and ~0.3 over the SAO at 550 nm) with the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2), Ozone Monitoring Instrument (OMI) or Moderate Resolution Imaging Spectroradiometer (MODIS) data. The simulations indicate smoke transport over the SAO occurs mainly between 2 and 4 km, consistent with surface and aircraft lidar observations. The BBA single scattering albedo is slightly overestimated compared to the Aerosol Robotic Network (AERONET) and more significantly when compared to Ascension Island surface observations. The difference could be due to the absence of internal mixing treatment in the ALADIN-Climate model. The SSA overestimate leads to an underestimation of the simulated SW radiative heating compared to ORACLES data. ALADIN-Climate simulates a positive (monthly mean) SW DRE of about +6 W m -2 over the SAO (20 ° S–10 ° N and 10 ° W–20 ° E) at the top of the atmosphere and in all-sky conditions. Over the continent, the presence of BBA is shown to significantly decrease the net surface SW flux, through direct and semi-direct effects, which is compensated by a decrease (monthly mean) in sensible heat fluxes ( -25 W m -2 ) and surface land temperature ( -1.5 ° C) over Angola, Zambia and the Democratic Republic of the Congo, notably. The surface cooling and the lower tropospheric heating decrease the continental planetary boundary layer height by about ~200 m.

54 ENVIRONMENTAL SCIENCES↗

Pressure distribution data from tests of 2.29 M (7.5 feet) span EET high-lift transport aircraft model in the Ames 12-foot pressure tunnel

A high-lift transport aircraft model equipped with full-span leading-edge slat and part-span double-slotted trailing-edge flap was tested in the Ames 12-ft pressure tunnel to determine the low-speed performance characteristics of a representative high-aspect-ratio supercritical wing. These tests were performed in support of the Energy Efficient Transport (EET) program which is one element of the Aircraft Energy Efficiency (ACEE) project. Static longitudinal forces and moments and chordwise pressure distributions at three spanwise stations were measured for cruise, climb, two take-off flap, and two landing flap wing configurations. The tabulated and plotted pressure distribution data is presented without analysis or discussion.

Kjelgaard, S. O.↗

Development of a series of Korean pediatric and adult head computational phantoms and application to nuclear medicine dosimetry - Paper 26

Over the past decades, advances in Single Photon Emission Computed Tomography (SPECT) and Positron Emission Tomography (PET) imaging techniques and an increasing number of new radiopharmaceuticals have resulted in a surge of neuroimaging applications in nuclear medicine on pediatric and adult patients. It is not feasible to directly measure the absorbed dose to the organs of the human body from nuclear medicine procedures. The formalism of the Medical Internal Radiation Dose (MIRD) committee of the Society of Nuclear Medicine has been adopted as the calculation method to estimate radiation dose to target organs from radionuclides distributed in source organs. The absorbed dose to a target organ from different types of radionuclides distributed within source organs can be estimated by the products of the time-integrated activity in each source region and organ dose conversion coefficients, called S values (Gy/MBq-s). S values are computed from a comprehensive set of Specific Absorbed Fraction (SAF), which are calculated from computational human phantoms with realistic anatomical structures coupled with Monte Carlo transport technique. The current SAF data for pediatric and adult head and brain dosimetry is based on a series of stylized computational phantoms. However, dosimetric errors caused by the unrealistic anatomy of stylized phantoms in internal dosimetry calculations have been reported by several studies. In the current study, we developed a series of realistic computational head phantoms representing 6, 9, 12, 15, and 22-year-old standard Korean males, and computed a comprehensive set of SAFs using the phantoms coupled with Monte Carlo transport technique. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Analysis of CO Transport from Australia Fires and Its Impact to Ozone, Water Vapor and Clouds Using CrIS Single-Field-of-View Sounder Products and Other Remote Sensing and MERRA-2 Reanalysis Data

Australia’s unprecedented fire disasters at the end of 2019 to early 2020 emitted huge amounts of carbon monoxide (CO) and fire aerosol particles, and the long-range transport of the smoke plumes poses great impact to climate change, such as altering the Antarctic ozone (O3) hole. Spaceborne observations from satellites have been proven successful in monitoring CO from wildfires in the past decade and can be used to examine the associated CO transport. The primary remote sensing data used in this study is the Single Field of View (SFOV) Sounder Atmospheric Product (SiFSAP) derived from the Cross-track Infrared Sounder (CrIS) on SNPP, a new product that will be generated at NASA and released to the public in a few months. SiFSAP has a high spatial resolution of ~14 km and includes atmospheric profiles of temperature, water vapor, CO, O3, as well as cloud products, and as the SiFSAP algorithm performs both day- and night-time retrievals, it provides an additional observation for night-time in comparison to the day-time-only solar polar satellite instruments such as MOPPIT, OMPS, and TROPOMI. Most recent significant improvements in the quality of this product plus its good spatial resolution (better than most global weather and climate models) enable us to conduct process-oriented analysis of CO transport, and the variation of water vapor, O3 and clouds (optical depth, effective radius and cloud height) within and around the fire plumes. The wind fields from MERRA-2 reanalysis will be used to help characterize the transport. Other remote sensing data, such as CO from AIRS, MOPPIT and TROPOMI, O3 from OMPS and TROPOMI, as well as the UV aerosol index from OMI and OMPS, will be used and compared with SiFSAP sounder products. Cross-validation of CO and O3 from these different sensors with the corresponding MERRA-2 products will also be carried out. Along the plume transport path, some enhancement of O3 and correlation between fire aerosol, cloud optical depth and water vapor have been found but need further investigation. Using the transport of fire plumes over the Southern Pacific Ocean as a unique testbed, this study will demonstrate the trace species monitoring capability of current satellite observations, in particular, for CO and O3, and hopefully, it will provide some insight on the impacts on fire emissions on air quality and climate.

Xiaozhen (Shawn) Xiong↗

Analysis of direct numerical simulation data of a Mach 4.5 transitional boundary-layer flow

This paper describes the creation, by temporal direct numerical simulation and the analysis based on the Reynolds stress transport equations, of a high-quality data set that represents the laminar-turbulent transition of a high-speed boundary-layer flow. Following Pruett and Zang (1992), and with the help of algorithmic refinements, the evolution of an axial, Mach 4.5 boundary-layer flow along a hollow cylinder is simulated numerically. Favre-averaged Reynolds stress transport equations are derived in generalized curvilinear coordinates and are then specialized to the cylindrical geometry at hand. Reynolds stresses and various turbulence quantities, such as turbulent kinetic energy and turbulent Mach number, are calculated from the numerical data at various stages of the transition process. The kinetic energy 'budgets' are constructed from the transport equations. Various contributing terms for the evolution of kinetic energy, like the rates of production and dissipation, transport, and diffusion, are presented. The compressible dissipation rate is small in comparison with the solenoidal dissipation rate for all times. The pressure-dilatation term is of the same order of magnitude as the compressible dissipation rate.

Dinavahi, Surya P. G.↗

An Integrated Approach to Swept Wing Icing Simulation

This paper describes the various elements of a simulation approach used to develop a database of ice shape geometries and the resulting aerodynamic performance data for a representative commercial transport wing model exposed to a variety of icing conditions. This effort included testing in the NASA Icing Research Tunnel, the Wichita State University Walter H. Beech Wind Tunnel, and the ONERA F1 Subsonic Wind Tunnel as well as the use of ice accretion codes, an inviscid design code, and computational fluid dynamics codes. Additionally, methods for capturing full three-dimensional ice shape geometries, geometry interpolation along the span of the wing, and creation of artificial ice shapes based upon that geometric data were developed for this effort. The icing conditions used for this effort were representative of actual ice shape encounter scenarios and run the gamut from ice roughness to full three-dimensional scalloped ice shapes. The effort is still underway so this paper is a status report of work accomplished to date and a description of the remaining elements of the effort.

ice accretion↗

Analysis of Nonequilibrium Molecular Nitrogen Ultraviolet Radiation in Pure N2 Shockwaves

This paper presents an analysis of data previously reported from a test series in the Electric Arc Shock Tube Facility for incident shocks composed of pure Nitrogen. The present work focuses on the lowest velocity measured in the test (approximately 7 km/s) where molecular radiation is significant. Analysis of the spectral data with the NEQAIR radiative transport code obtains post-shock trends in temperature and number densities of the states of N2. The results suggest that chemical, and possibly thermal, equilibrium has not been obtained within the distance/time measured (about 5 cm/120 s). In the nonequilibrium region of the shock, differences between rotational temperatures of different species are observed, as well as differences between rotational and vibrational temperatures. Population of rotational states above the dissociation limit is observed to occur over a distance of several cm. Finally, these data suggest that predissociation strongly affects the C^3 Π_u state of N2, leading to a lower measured radiation than predicted. An effective average pre-dissociation rate is shown to produce reasonable agreement under quasi-steady state approximation.

Augustin Tibere Inglesse↗

Analysis of nonequilibrium molecular nitrogen ultraviolet radiation in pure N2 shockwaves

An analysis of data previously reported from a test series in the Electric Arc Shock Tube Facility for incident shocks composed of pure Nitrogen was performed. The present work focuses on the lowest velocity measured in the test (approximately 7 km/s) where molecular radiation is significant. Analysis of the spectral data with the NEQAIR radiative transport code obtains post-shock trends in temperature and number densities of the states of N2. The results suggest that chemical, and possibly thermal, equilibrium has not been obtained within the distance/time measured (about 5 cm/120 ms). In the nonequilibrium region of the shock, differences between rotational temperatures of different species are observed, as well as differences between rotational and vibrational temperatures. Population of rotational states above the dissociation limit is observed to occur over a distance of several cm. Finally, these data suggest that predissociation strongly affects the C^3 Π_u state of N2, leading to a lower measured radiation than predicted. An effective average pre-dissociation rate is shown to produce reasonable agreement under quasi-steady state approximation.

Augustin Tibere-Inglesse↗