Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Metal-ion exchange induced structural transformation as a way of forming novel Ni(II)− and Cu(II)−salicylaldimine structures

A Zn(II)−salicylaldimine complex [Zn(L{sup salpyca})(H{sub 2}O)]{sub n} (1, where H{sub 2}L{sup salpyca}=4-hydroxy-3-(((pyridin-2-yl)methylimino)methyl)benzoic acid), with a one-dimensional (1D) chain structure, has been successfully converted to a discrete Ni(II)−salicylaldimine complex [Ni(L{sup salpyca})(H{sub 2}O){sub 3}] (2) and an infinite Cu(II)−salicylaldimine complex ([Cu(L{sup salpyca})]·3H{sub 2}O){sub n} (3) through a metal-ion exchange induced structural transformation process. However, such processes do not worked by Mn(II) and Co(II) ions. Solid-state structure analyses reveal that complexes 1–3 form comparable coordinative or supramolecular zigzag chains running along the crystallographic [201] direction. In addition, replacing Zn(II) ion by Ni(II) and Cu(II) ions caused changes in coordination environment and sphere of metal centers, from a 5-coordinate intermediate geometry of square pyramidal and trigonal bipyramidal in 1 to a 6-coordinate octahedral geometry in 2, and to a 4-coordiante square planar geometry in 3. This study shows that metal-ion exchange serves as a very efficient way of forming new coordination complexes that may not be obtained through direct synthesis. - Graphical abstract: A Zn(II)−salicylaldimine zigzag chain has been successfully converted to a Ni(II)−salicylaldimine supramolecular zigzag chain and a Cu(II)−salicylaldimine coordinative zigzag chain through metal-ion exchange induced structural transformations, which is not achieved by Mn(II) and Co(II) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Thermal stability and phase transformation in fully indium oxide (InO{sub 1.5}) stabilized zirconia

Indium oxide (InO{sub 1.5}) stabilized zirconia (InSZ) is an attractive material as electrolyte, or electrode, in solid oxide fuel cells (SOFCs), and as corrosion resistant top coat in thermal barrier coatings. However, little is known about the phase stability of cubic InSZ at temperatures that simulate the conditions in an operating SOFC or turbine. This article provides an investigation of the phase stability and phase transformations in cubic InSZ after heat treatments at 800, 1000, and 1200 °C for periods up to 2000 h. The results revealed that cubic InSZ is not stable during annealing at 1000 and 1200 °C, owing to a fast destabilization of the initial cubic phase to tetragonal, and eventually to monoclinic (c → t → m). The c → t → m transition in InSZ is intimately associated with the indium volatilization. On the other hand, cubic InSZ remained stable for 2000 h at 800 °C, although the partial formation of the tetragonal phase was observed along with a 0.25% contraction in the unit cell volume of the cubic phase, caused by short-range ordering. These results demonstrate that technological applications of cubic InSZ are restricted to temperatures at which the volatilization of the InO{sub 1.5} stabilizer does not occur. - Highlights: •Phase stability of fully InO{sub 1.5} stabilized zirconia (cubic InSZ) was evaluated. •Cubic InSZ is instable at temperatures ≥ 1000 °C, owing to the cubic-to-tetragonal-to-monoclinic destabilization. •Cubic InSZ undergoes the cubic-to-tetragonal transformation at ~ 800 °C. •Owing to the low phase stability, applications of cubic InSZ in TBCs or SOFCs are restricted.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The evolution of orientation relationships during the transformation of a twin-free T-particle to tenfold T-twins in an Al alloy during homogenisation

Highlights: • The ORs of T-phase change continuously during its transformation to tenfold twins. • The changes in ORs are achieved by lattice rotations of T-phase about [010]{sub T} axis. • The OR change of T-phase exhibits a relationship with its cross-section shape. • The OR change of T-phase reduce the interface misfit increased by newly-formed twins. • Rotation of T-particle requires coordinate deformation at the near-interface region. - Abstract: The crystallographic and morphological analysis of T-phase formation in Al alloys was investigated using high-resolution electron microscopy (HRTEM) and selected-area electron diffraction pattern (SAEDP). The results show that the orientation relationships (ORs) of the T-phase change continuously from its original ORs during the transformation of a twin-free T-particle to the tenfold T-twins. These OR changes were achieved by lattice rotations of T-twin domains (T-TDs) about the [010]{sub T}//[010]{sub Al} axis by an angle ranging from 0° to 9°, and this exhibits a relationship with the shape of the cross-sections of the T-phase (T-CSs). The changes in ORs of the T-phase can reduce the increase in interface misfit between the newly-formed T-TDs and the Al matrix. The matrix could only accommodate the rotation of a T-particle at the near-interface region at relatively high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Texture evolution, phase transformation and mechanical properties of selective laser melted Ti-13Nb-13Zr

Highlights: • The crystallographic texture orientation of Ti-13Nb-13Zr alloy was tailored. • The evolution of the volume fraction of α′ phase was investigated. • The phase transformation was discussed using TEM/HRTEM observations. • The elastic moduli of α′ and β phases have been calculated. - Abstract: The crystallographic texture and phase composition associated with the performance of materials have been well documented, but there are very few studies on their controlling strategies. In this work, the crystallographic texture orientation and phase transformation of Ti-13Nb-13Zr alloy were tailored for the first time by selective laser melting with different scanning strategies. <011> crystal orientation along the building direction is preferred in sample A (unidirectional scanning along one axis), while <001> is preferred in sample B (unidirectional scanning with a 90° rotation in each layer). The evolution of the volume fraction of α′ phase was investigated using X-ray photoelectron spectroscopy. The results indicated that sample B has the highest content of α′ phasein sample B. The hardness and wear resistance have been studied through nanoindentation and the results turn out that all samples show higher hardness and better wear resistance (hin sample B. The hardness and wear resistance have been studied through nanoindentation and the results turn out that all samples show higher hardness and better wear resistance (higher H{sub d}/E{sub r} and H{sub d}{sup 3}/E{sub r}{sup 2} ratios) than widely used CP Ti. A simple micromechanical model was used to calculate the elastic moduli of α′ and β phases, which were determined to be 151 GPa and 64 GPa, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2014

High damping NiTi/Ti 3 Sn in situ composite with transformation-mediated plasticity

The concept of transformation-induced plasticity effect is introduced in this work to improve the plasticity of brittle intermetallic compound Ti3Sn, which is a potent high damping material. This concept is achieved in an in situ NiTi/Ti3Sn composite. The composite is composed of primary Ti3Sn phase and (NiTi + Ti3Sn) eutectic structure formed via hypereutectic solidification. The composite exhibits a high damping capacity of 0.075 (indexed by tan δ), a high ultimate compressive strength of 1350 MPa, and a large plasticity of 27.5%. In situ synchrotron high-energy X-ray diffraction measurements revealed clear evidence of the stress-induced martensitic transformation (B2 → B19) of the NiTi component during deformation. The strength of the composite mainly stems from the Ti3Sn, whereas the NiTi component is responsible for the excellent plasticity of the composite.

Composite↗
DOE OSTI2021

Catalysts by pyrolysis: Direct observation of chemical and morphological transformations leading to transition metal-nitrogen-carbon materials

Transition metal-nitrogen-carbon materials (M-N-C catalysts) are promising electrocatalysts in polymer electrolyte fuel cells (PEFCs) and electrolyzer applications. High temperature treatment in inert atmosphere (pyrolysis) is the essential, most common method for the synthesis of M-N-C catalysts and critical to achieve high electrocatalytic activity and electronic conductivity. To this day, despite many uses and successful implementations in materials manufacturing, pyrolysis has been an entirely empirical technology, with process control and optimization relying exclusively on “Edisonian” approach. The knowledge gap in the mechanism about how the precursor is being transformed into catalysts hinders further development of the M-N-C catalysts regardless of the precursor class and processing protocols. In this work, we probed the morphological evolution and chemical transformation of a nitrogen-containing charge transfer organic salt, mixed with transition metal (iron) salt and amorphous silica powder (precursor) during the pyrolysis process via a combination of in situ synchrotron and laboratory-based diagnostic techniques. The pyrolysis process is found to be divided into three stages. During a controlled temperature ramp, the selected organic N-C precursor (nicarbazin) began melting and decomposing just below 400 °C, forming a certain number of micrometer-scale pores and pathways. With increase in temperature from 400 °C to 900 °C, amorphous carbon domains started forming, and reduced (metallic) iron nanoclusters appeared, being dispersed uniformly throughout the carbonaceous matrix. When temperature advanced above 900 °C, graphitization of carbon commenced, associated with appearance and evolution of atomically dispersed metal-nitrogen moieties in the carbonaceous matrix. As the graphitization advanced further, a secondary process of agglomeration of metal nanoparticles occurred. Multi-analytical technique observations conducted here provide a base for rational design and optimization of M-N-C electrocatalysts via pyrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dynamic phase transformations in additively manufactured Ti-6Al-4V during thermo-mechanical gyrations

A complex interaction of process parameters, geometry and scan strategies in Additive Manufacturing (AM), can bring about spatial and temporal transients, i.e., Σ T ( x, y, z, time ), within a part. Published literature focusses on fluctuating thermal cycles on the microstructure evolution. However, the microstructural variations have not been correlated to dynamic flow behavior due to the macro- and micro-scale phenomena, i.e., accumulated plastic strains brought about by large thermal gradients, transformational strains and crystallographic misfit strains. Therefore, here we studied the mechanical response of Ti6Al4V alloys produced by AM under externally imposed controlled thermo-mechanical reversals in a Gleeble® thermo-mechanical simulator. The stress-strain behaviors were correlated to phase fractions, lattice strains, and also limited information on crystallographic texture using neutron diffraction techniques at the VULCAN Beamline at SNS, ORNL and also metallographic studies. The results are discussed and rationalized based on theories of static and dynamic phase transformations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Beyond interpolation: Physics-inspired gating transformers for extrapolating irradiation conditions to novel nuclear fuels

The qualification of advanced nuclear fuels relies on irradiation experiments in test reactors that emulate commercial conditions. Designing these tests requires accurate prediction of key irradiation quantities, particularly heat generation rate and burnup, yet obtaining them typically involves computationally expensive multi-step simulation workflows. We propose a physics-inspired gating transformer (PIGT) that integrates an inverse-square, distance-based attenuation into the encoder representation to bias attention toward physically relevant spatial relationships while retaining data-driven flexibility. Using MiniFuel irradiation data from the High Flux Isotope Reactor at Oak Ridge National Laboratory, we benchmark against ensemble methods, feedforward and recurrent networks, convolutional models, and standard transformers. While baseline models perform well under interpolation, they exhibit a pronounced generalization gap when evaluated on fuels not included in the training set. The proposed model consistently improves extrapolative accuracy and stability, yielding the strongest performance on unseen fuel configurations. These results indicate that a lightweight physics structure embedded within attention mechanisms can substantially improve robustness, enabling more reliable surrogate predictions to accelerate the design of nuclear fuel irradiation experiments.

Fuel qualification↗
DOE OSTI2014

Resveratrol mediated cell death in cigarette smoke transformed breast epithelial cells is through induction of p21Waf1/Cip1 and inhibition of long patch base excision repair pathway

Cigarette smoking is a key factor for the development and progression of different cancers including mammary tumor in women. Resveratrol (Res) is a promising natural chemotherapeutic agent that regulates many cellular targets including p21, a cip/kip family of cyclin kinase inhibitors involved in DNA damage-induced cell cycle arrest and blocking of DNA replication and repair. We have recently shown that cigarette smoke condensate (CSC) prepared from commercially available Indian cigarette can cause neoplastic transformation of normal breast epithelial MCF-10A cell. Here we studied the mechanism of Res mediated apoptosis in CSC transformed (MCF-10A-Tr) cells in vitro and in vivo. Res mediated apoptosis in MCF-10A-Tr cells was a p21 dependent event. It increased the p21 protein expression in MCF-10A-Tr cells and MCF-10A-Tr cells-mediated tumors in xenograft mice. Res treatment reduced the tumor size(s) and expression of anti-apoptotic proteins (e.g. PI3K, AKT, NFκB) in solid tumor. The expressions of cell cycle regulatory (Cyclins, CDC-2, CDC-6, etc.), BER associated (Pol-β, Pol-δ, Pol-ε, Pol-η, RPA, Fen-1, DNA-Ligase-I, etc.) proteins and LP-BER activity decreased in MCF-10A-Tr cells but remain significantly unaltered in isogenic p21 null MCF-10A-Tr cells after Res treatment. Interestingly, no significant changes were noted in SP-BER activity in both the cell lines after Res exposure. Finally, it was observed that increased p21 blocks the LP-BER in MCF-10A-Tr cells by increasing its interaction with PCNA via competing with Fen-1 after Res treatment. Thus, Res caused apoptosis in CSC-induced cancer cells by reduction of LP-BER activity and this phenomenon largely depends on p21. - Highlights: • Resveratrol (Res) caused reduction of MCF-10A-Tr cell growth by inducing apoptosis. • Res caused cell cycle arrest and DNA damage in p21 dependent manner. • Res mediated LP-BER reduction in MCF-10A-Tr cells was a p21 dependent phenomenon. • Res inhibits BER and PI3K, AKT, and NFκB protein expressions in tumor and xenografts. • Res-induced-p21 inhibited DNA repair by modulating Fen-1 binding to PCNA complex.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

The Extent of Fermentative Transformation of Phenolic Compounds in the Bioanode Controls Exoelectrogenic Activity in a Microbial Electrolysis Cell

Phenolic compounds in hydrolysate/pyrolysate and wastewater streams produced during the pretreatment of lignocellulosic biomass for biofuel production present a significant challenge in downstream processes. Bioelectrochemical systems are increasingly recognized as an alternative technology to handle biomass-derived streams and to promote water reuse in biofuel production. Thus, a thorough understanding of the fate of phenolic compounds in bioanodes is urgently needed. The present study investigated the biotransformation of three structurally similar phenolic compounds (syringic acid, SA; vanillic acid, VA; 4-hydroxybenzoic acid, HBA), and their individual contribution to exoelectrogenesis in a microbial electrolysis cell (MEC) bioanode. Fermentation of SA resulted in the highest exoelectrogenic activity among the three compounds tested, with 50% of the electron equivalents converted to current, compared to 12 and 9% for VA and HBA, respectively. The biotransformation of SA, VA and HBA was initiated by demethylation and decarboxylation reactions common to all three compounds, resulting in their corresponding hydroxylated analogs. SA was transformed to pyrogallol (1,2,3-trihydroxybenzene), whose aromatic ring was then cleaved via a phloroglucinol pathway, resulting in acetate production, which was then used in exoelectrogenesis. In contrast, more than 80% of VA and HBA was converted to catechol (1,2-dihydroxybenzene) and phenol (hydroxybenzene) as their respective dead-end products. The persistence of catechol and phenol is explained by the fact that the phloroglucinol pathway does not apply to di- or mono-hydroxylated benzenes. Previously reported, alternative ring-cleaving pathways were either absent in the bioanode microbial community or unfavorable due to high energy-demand reactions. With the exception of acetate oxidation, all biotransformation steps in the bioanode occurred via fermentation, independently of exoelectrogenesis. Therefore, the observed exoelectrogenic activity in batch runs conducted with SA, VA and HBA was controlled by the extent of fermentative transformation of the three phenolic compounds in the bioanode, which is related to the number and position of the methoxy and hydroxyl substituents.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Suppression of latent transforming growth factor-β (TGF-β)-binding protein 1 (LTBP1) inhibits natural killer/ T cell lymphoma progression by inactivating the TGF-β/Smad and p38MAPK pathways

Natural killer/T cell lymphoma (NKTCL) is a distinct subtype of Non-Hodgkin's lymphoma with highly aggressive clinical behavior. We aim to investigate the function of Latent transforming growth factor β binding protein 1 (LTBP1) and transforming growth factor beta1 (TGF-β1) and complex molecular pathogenesis of this disease.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Lifting of the Vlasov–Maxwell bracket by Lie-transform method

The Vlasov–Maxwell equations possess a Hamiltonian structure expressed in terms of a Hamiltonian functional and a functional bracket. In the present paper, the transformation (‘lift’) of the Vlasov–Maxwell bracket induced by the dynamical reduction of single-particle dynamics is investigated when the reduction is carried out by Lie-transform perturbation methods. The ultimate goal of this work is to provide an explicit pathway to the Hamiltonian formulations for the guiding-centre and gyrokinetic Vlasov–Maxwell equations, which have found important applications in our understanding of turbulent magnetized plasmas. Here, it is shown that the general form of the reduced Vlasov–Maxwell equations possesses a Hamiltonian structure defined in terms of a reduced Hamiltonian functional and a reduced bracket that automatically satisfies the standard bracket properties.

Physics↗
DOE OSTI2016

Heat-Induced Phase Transformation of Three-Dimensional Nb 3 O 7 (OH) Superstructures: Effect of Atmosphere and Electron Beam

Nanostructured niobium oxides and hydroxides are potential candidates for photochemical applications due to their excellent optical and electronic properties. In the present work the thermal stability of Nb 3 O 7 (OH) superstructures prepared by a simple hydrothermal approach is investigated at the atomic scale. Transmission electron microscopy and electron energy-loss spectroscopy provide insights into the phase transformation occurring at elevated temperatures and probe the effect of the atmospheric conditions. In the presence of oxygen, H 2 O is released from the crystal at temperatures above 500 °C, and the crystallographic structure changes to H-Nb 2 O 5 . In addition to the high thermal stability of Nb 3 O 7 (OH), the morphology was found to be stable, and first changes in the form of a merging of nanowires are not observed until 850 °C. Under reducing conditions in a transmission electron microscope and during electron beam bombardment, an oxygen-deficient phase is formed at temperatures above 750 °C. This transformation starts with the formation of defects in the crystal lattice at 450 °C and goes along with the formation of pores in the nanowires which accommodate the volume differences of the two crystal phases.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Effect of pH on Amorphous Calcium Carbonate Structure and Transformation

A number of organisms produce crystalline calcium carbonate via a metastable precursor phase termed amorphous calcium carbonate (ACC). ACC also forms during production of CaCO 3 for industrial purposes, e.g., paper manufacturing and synthesis of fillers for polymers. Previous studies suggest that the local structure of ACC controls crystallization kinetics and pathways, i.e., the crystalline polymorph(s) that form(s) in the process. We used pair distribution function (PDF) analysis to provide evidence that the local structure of ACC gradually changes as the pH of the synthesis solutions is increased from 10.6 to 12.7, at ambient conditions. Here, these changes correlate with the mole fraction of incorporated hydroxide ions, which varies gradually from negligible at pH 10.6 to 0.12 at pH 12.7. At lower pH (10.5), vaterite and calcite formed in less than 2 min, but as the pH increased, the lifetime of ACC increased, and it transformed directly to calcite (i.e., no vaterite intermediate). Although higher pH led to a preferable transformation into calcite with decreasing crystal size, variations in ACC local structure cannot be linked to development of a calcite like motif, as has been suggested. On the basis of comparing the measured vaterite PDF to a range of structural models to determine Ca–Ca distances, we found no obvious structural similarity between vaterite and the ACC precursor either, although such analysis is complicated by the ambiguity of the vaterite structure. Presumably, the absence of vaterite and the prolonged ACC stability with increasing synthesis pH could indicate inhibition of crystal nucleation and growth by hydroxide ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thermal Stability of Quasi-1D NbS 3 Nanoribbons and Their Transformation to 2D NbS 2 : Insights from in Situ Electron Microscopy and Spectroscopy

Here in situ electron microscopy imaging and spectroscopy enabled us to study the evolution of quasi-1D NbS 3 -IV nanoribbons with respect to morphology and chemical structure at temperatures between room temperature and 1000 °C. Scanning transmission electron microscopy (STEM) experiments included imaging in the secondary electron, (transmitted) bright field, and high-angle annular dark-field modes while operating in the low kV regime. The results showed that NbS 3 -IV samples transform dramatically from smooth nanoribbons into highly textured configurations featuring polyhedral divots and steps. Similar in situ heating experiments conducted with aberration-corrected STEM revealed that bilayers of NbS 3 -IV chains convert topotactically into aligned 2H-NbS 2 sheets upon loss of sulfur. Atomic resolution imaging, fast Fourier transform analysis, and electron energy loss spectroscopy confirmed these chemical changes, from which we propose an atomistic mechanism for the NbS 3 -IV → 2H-NbS 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

From Layered Antiferromagnet to 3D Ferromagnet: LiMnBi-to-MnBi Magneto-Structural Transformation

Here, the intermetallic compound LiMnBi was synthesized by the two-step solid-state reaction from the elements. The synthesis temperature of 850 K was selected based on in-situ high-temperature powder X-ray diffraction data. LiMnBi crystalizes in the layered-like PbClF structure type (a = 4.3131(7) Å, c = 7.096(1) Å at 100 K, P4/nmm space group, Z = 2). LiMnBi structure is built of the alternating [MnBi] and Li layers, as determined from single-crystal X-ray diffraction data. Magnetic properties measurements and solid-state 7 Li Nuclear Magnetic Resonance data collected for polycrystalline LiMnBi samples indicate the long-range antiferromagnetic ordering of Mn sublattice at ~340 K, with no superconductivity down to 5 K detected. LiMnBi is air- and water-sensitive. In aerobic conditions, Li can be extracted from LiMnBi structure to form Li 2 O/LiOH and MnBi (NiAs structure type, P6 3 /mmc). The obtained MnBi polymorph was previously reported to be one of the strongest rare-earth-free ferromagnets, yet its bulk synthesis in powder form is cumbersome. The proposed magneto-structural transformation from ternary LiMnBi to ferromagnetic MnBi involves condensation of the MnBi4 tetrahedra upon Li deintercalation and is exclusive to LiMnBi. In contrast, ferromagnetic MnBi cannot be obtained from either isostructural NaMnBi and KMnBi, or from the structurally related CaMn 2 Bi 2 . Such a distinctive transformation in the case of LiMnBi is presumed to be due to its fitting reactivity to yield MnBi and favorable interlayer distance between [MnBi] layers, while the interlayer distance in NaMnBi and KMnBi structural analogs is unfavorably long. The studies of delithiation from the layered-like LiMnBi under different chemical environments indicate that the yield of the MnBi depends on the type of solvent used and the kinetics of the reaction. A slow rate and mild reaction media lead to a high fraction of the MnBi product. The saturation magnetization of the “as-prepared” MnBi is ~50 % of the expected value of 81.3 emu/g. Overall, this study adds a missing member to the family of ternary pnictides and illustrates how soft-chemistry methods can be used to obtain “difficult-to-synthesize” compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Sub-micron Polymer–Zeolitic Imidazolate Framework Layered Hybrids via Controlled Chemical Transformation of Naked ZnO Nanocrystal Films

In this paper, we show that sub-micron coatings of zeolitic imidazolate frameworks (ZIFs) and even ZIF-ZIF bilayers can be grown directly on polymers of intrinsic microporosity from zinc oxide (ZnO) nanocrystal precursor films, yielding a new class of all-microporous layered hybrids. The ZnO-to-ZIF chemical transformation proceeded in less than 30 min under microwave conditions using a solution of the imidazole ligand in N,N-dimethylformamide (DMF), water, or mixtures thereof. By varying the ratio of DMF to water, it was possible to control the morphology of the ZIF-on-polymer from isolated crystallites to continuous films. Grazing incidence X-ray diffraction was used to confirm the presence of crystalline ZIF in the thin films, and X-ray absorption spectroscopy was used to quantify film purity, revealing films with little to no residual ZnO. Finally, the role solvent plays in the transformation mechanism is discussed in light of these findings, which suggest the ZnO nanocrystals may be necessary to localize heterogeneous nucleation of the ZIF to the polymer surface.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Formation of soluble mercury oxide coatings: Transformation of elemental mercury in soils

In this study, the impact of mercury (Hg) on human and ecological health has been known for decades. Although a treaty signed in 2013 by 147 nations regulates future large-scale mercury emissions, legacy Hg contamination exists worldwide and small-scale releases will continue. The fate of elemental mercury, Hg(0), lost to the subsurface and its potential chemical transformation that can lead to changes in speciation and mobility are poorly understood. Here, we show that Hg(0) beads interact with soil or manganese oxide solids and X-ray spectroscopic analysis indicates that the soluble mercury coatings are HgO. Dissolution studies show that, after reacting with a composite soil, >20 times more Hg is released into water from the coated beads than from a pure liquid mercury bead. An even larger, >700 times, release occurs from coated Hg(0) beads that have been reacted with manganese oxide, suggesting that manganese oxides are involved in the transformation of the Hg(0) beads and creation of the soluble mercury coatings. Although the coatings may inhibit Hg(0) evaporation, the high solubility of the coatings can enhance Hg(II) migration away from the Hg(0)-spill site and result in potential changes in mercury speciation in the soil and increased mercury mobility.

58 GEOSCIENCES↗