Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Relative surface wave amplitude and phase anomalies from the Democratic People's Republic of Korea announced nuclear tests

Here, we performed relative locations of six event pairs based on surface wave (SW) and body wave (BW) differential traveltimes of the 9 September 2016, 6 January 2016, 12 February 2013, and 25 May 2009 announced North Korea nuclear explosions. The SW relative locations for the 25 May 2009 and 12 February 2013 events were inconsistent with the BWs when paired with other events, and only the 6 January 2016/9 September 2016 pair was consistent. Apparent SW phase shift is investigated with respect to the BW relative locations. The pairs formed with the 25 May 2009 and 12 February 2013 events, beneath the southeast slope of Mount Mant'ap, have the largest phase shifts and amplitude ratio deviations, whereas the least deviation was from the 6 January 2016 and 9 September 2016 event pair beneath the mountain peak. Regional moment tensors (MTs) predict the amplitude ratios but do not resolve the relative phase. We find that MTs with 10% difference in isotropic and rotated +CLVD can fit both relative phase and amplitude ratios. SW relative locations of highly isotropic and correlated explosion clusters can be affected by topography and small differences in MT.

58 GEOSCIENCES↗
DOE OSTI2017

Potential for Small Unmanned Aircraft Systems Applications for Identifying Groundwater-Surface Water Exchange in a Meandering River Reach: sUAS in Groundwater-Surface Water Study

The exchange of groundwater and surface water (GW-SW), including dissolved constituents and energy, represents a critical yet challenging characterization problem for hydrogeologists and stream ecologists. Here we describe the use of a suite of high spatial resolution remote sensing techniques, collected using a small unmanned aircraft system (sUAS), to provide novel and complementary data to analyze GW-SW exchange. sUAS provided centimeter-scale resolution topography and water surface elevations, which are often drivers of exchange along the river corridor. Additionally, sUAS-based vegetation imagery, vegetation-top elevation, and normalized difference vegetation index mapping indicated GW-SW exchange patterns that are difficult to characterize from the land surface and may not be resolved from coarser satellite-based imagery. We combined these data with estimates of sediment hydraulic conductivity to provide a direct estimate of GW “shortcutting” through meander necks, which was corroborated by temperature data at the riverbed interface.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

A Comparison of the Diel Cycle of Modeled and Measured Latent Heat Flux During the Warm Season in a Colorado Subalpine Forest

Abstract Precipitation changes the physiological characteristics of an ecosystem. Because land‐surface models are often used to project changes in the hydrological cycle, modeling the effect of precipitation on the latent heat flux λE is an important aspect of land‐surface models. Here we contrast conditionally sampled diel composites of the eddy‐covariance fluxes from the Niwot Ridge Subalpine Forest AmeriFlux tower with the Community Land Model (CLM, version 4.5). With respect to measured λE during the warm season: for the day following above‐average precipitation, λE was enhanced at midday by ≈40 W m −2 (relative to dry conditions), and nocturnal λE increased from ≈10 W m −2 in dry conditions to over 20 W m −2 in wet conditions. With default settings, CLM4.5 did not successfully model these changes. By increasing the amount of time that rainwater was retained by the canopy/needles, CLM was able to match the observed midday increase in λE on a dry day following a wet day. Stable nighttime conditions were problematic for CLM4.5. Nocturnal CLM λE had only a small (≈3 W m −2 ) increase during wet conditions, CLM nocturnal friction velocity u ∗ was smaller than observed u ∗ , and CLM canopy air temperature was 2°C less than those measured at the site. Using observed u ∗ as input to CLM increased λE ; however, this caused CLM λE to be increased during both wet and dry periods. We suggest that sloped topography and the ever‐present drainage flow enhanced nocturnal u ∗ and λE . Such phenomena would not be properly captured by topographically blind land‐surface models, such as CLM.

Burns, Sean P.↗
DOE OSTI2019

Atomic-Scale Manipulation and In Situ Characterization with Scanning Tunneling Microscopy

Scanning tunneling microscope (STM) has presented a revolutionary methodology to nanoscience and nanotechnology. It enables imaging of the topography of surfaces, mapping the distribution of electronic density of states, and manipulating individual atoms and molecules, all at atomic resolutions. In particular, atom manipulation capability has evolved from fabricating individual nanostructures toward the scalable production of the atomic-sized devices bottom-up. The combination of precision synthesis and in situ characterization has enabled direct visualization of many quantum phenomena and fast proof-of-principle testing of quantum device functions with immediate feedback to guide improved synthesis. Several representative examples are reviewed to demonstrate the recent development of atomic-scale manipulation, focusing on progress that addresses quantum properties by design in several technologically relevant materials systems. Integration of several atomically precisely controlled probes in a multiprobe STM system vastly extends the capability of in situ characterization to a new dimension where the charge and spin transport behaviors can be examined from mesoscopic to atomic length scale. The automation of atomic-scale manipulation and the integration with well-established lithographic processes further push this bottom-up approach to a new level that combines reproducible fabrication, extraordinary programmability, and the ability to produce large-scale arrays of quantum structures.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Freestanding Photoresist Film: A Versatile Template for Three-Dimensional Micro- and Nanofabrication

Ultrathin freestanding films with well-defined micro/nanostructures and robust mechanical properties are applied in many engineering applications including microelectronics, optics, filtration and separation, biomedical engineering, and nanotechnology. Although considerable efforts have been made toward the fabrication of freestanding thin films, it is still a significant challenge to develop a simple and reliable process for producing freestanding films with ultrathin thickness, well-regulated micro/nanopatterns, robust mechanical properties, macroscopic coverage area, and multi-layered composite structures. In this work, a significant advancement is reported in this regard. This study shows a new sacrificial-layer-free (SLF) lifting-off process, integrated with conventional micro- and nanolithography, enabling the release of micro- and nanopatterned photoresist (PR) films from the supporting substrate with unprecedented pattern coverage and structure characteristics. The freestanding PR film is resilient, can withstand significant bending and deformation, and is sufficiently flexible to be transferred onto substrates with 3D topography as a conformal soft stencil for further technological processing and applications. Moreover, the SLF lifting-off process provides a simple approach to prepare single-layered and multi-layered freestanding composite films. The results suggest that the novel SLF lifting-off process can significantly extend the capability of 3D micro-/nanofabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Emergence of Local Magnetic Moment in Ternary TaWSe 2 Single Crystal via Atomic Clustering

Ternary transition metal dichalcogenides (TMDs) provide a versatile platform to explore novel electronic and magnetic ground states via compositional substitution and local structural modulations. Using a combination of scanning tunneling microscopy and spectroscopy (STM/S), magnetic property measurements, and density functional theory (DFT) calculations, the emergence of local magnetic moments driven by the clustering of Ta atoms in ternary TaWSe 2 single crystals is analyzed. STM topography reveals triangular clusters of Ta atoms embedded within W-rich regions of TaWSe 2 . These clusters exhibit a consistent shape and an orderly arrangement throughout the surfaces. DFT calculations show that these Ta clusters induce local strain, giving rise to localized magnetic moments. The magnetic behavior is further corroborated by temperature-dependent magnetization measurements, which exhibit a magnetic anomaly at ∼50 K. In conclusion, this study offers a pathway to engineer magnetism in TMD systems with potential applications in spintronic and quantum materials.

DFT↗
DOE OSTI2025

The Anisotropic Adsorption of De Novo Allosteric Two‐Component Protein Fibers on Mica Surfaces

Protein adsorption at solid–liquid interfaces underlies many biomedical and materials applications, yet the mechanisms governing adsorption of proteins and their assemblies remain poorly understood. Here we investigate de novo–designed proteins that self-assemble into three fibrillar morphologies — small (S), large (L), and helical (H)—on muscovite mica. S-fibers are metastable, forming first but diminishing as L- and H-fibers develop and deposit. Adsorption of both fibers and monomers depends on fiber morphology and solvent environment, which is modulated by the substrate. The anisotropic surface features of the fiber types—long axis of S- and L-fibers and helical grooves of H-fibers—correlate with specific crystallographic directions on mica (001). S- and L-fibers align along the unique lattice axis, while the substrate-facing groove of H-fibers preferentially aligns along the remaining symmetry-related directions. Increasing potassium chloride (KCl) concentrations to molar levels alters adsorption, decreasing monomer coverage relative to fibers. These observations, interpreted through the effect of interfacial interface, indicate that ion-mediated modulation of hydration layers governs electrostatic interactions and alignment. This study reveals how coupling between protein topography, substrate crystallography, and hydration structure dictates selective adsorption and orientation of protein assemblies, offering insights for rational biomolecular material design.

AFM↗
DOE OSTI2022

A Polymer Canvas with the Stiffness of the Bone Matrix to Study and Control Mesenchymal Stem Cell Response

Reproducing in vitro the complex multiscale physical features of human tissues creates novel biomedical opportunities and fundamental understanding of cell–environment interfaces and interactions. While stiffness has been recognized as a key driver of cell behavior, systematic studies on the role of stiffness have been limited to values in the KPa–MPa range, significantly below the stiffness of bone. Here, in this work, a platform enabling the tuning of the stiffness of a biocompatible polymeric interface up to values characteristic of human bone is reported, which are in the GPa range, by using extremely thin polymer films on glass and cross-linking the films using ultraviolet (UV) light irradiation. It is shown that a higher stiffness is related to better adhesion, proliferation, and osteogenic differentiation, and that it is possible to switch on/off cell attachment and growth by solely tuning the stiffness of the interface, without any surface chemistry or topography modification. Since the stiffness is tuned directly by UV irradiation, this platform is ideal for rapid and simple fabrication of stiffness patterns and gradients, thus representing an innovative tool for combinatorial studies of the synergistic effect of tissue environmental cues on cell behavior, and creates new opportunities for next-generation biosensors, single-cell patterning, and lab-on-a-chip devices.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Direct-Write Optical Patterning of P3HT Films Beyond the Diffraction Limit

Doping-induced solubility control is a patterning technique for semiconducting polymers, which utilizes the reduction in polymer solubility upon p-type doping to provide direct, optical control of film topography and doping level. In situ direct-write patterning and imaging are demonstrated, revealing sub-diffraction-limited topographic features. Here, photoinduced force microscopy shows that doping level can be optically modulated with similar resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Reversible Surface Patterning by Dynamic Crosslink Gradients: Controlling Buckling in 2D

Abstract Harnessing the self‐organization of soft materials to make complex, well‐ordered surface patterns in a noninvasive manner is challenging. The wrinkling of thin films provides a compelling strategy to achieve this. Despite much attention, however, a simple, single‐step, reversible method that gives rise to controlled, two‐dimensional (2D) ordered, continuous, and discontinuous patterns has proven to be elusive. Here a novel, robust method is described to achieve this using an ultraviolet‐light‐sensitive anthracene‐containing polymer thin film. The origin of the patterns is the local buckling of the thin film, where the control over the topology is given by laterally patterning out‐of‐plane gradients in the crosslink density of the film. The underlying buckling mechanics and formation of the surface features are well‐described by finite element analysis. By illuminating the film with a photomask, local and long‐range patterns that can be both continuous and discontinuous are able to be written. Furthermore, the patterning is fully reversible over multiple cycles. The results demonstrate a simple strategy for erasable storage of information in a surface topography that has applications in memory, anticounterfeiting, and plasmonics.

Hou, Honghao↗
DOE OSTI2024

Sub‐Diffraction Correlation of Quantum Emitters and Local Strain Fields in Strain‐Engineered WSe 2 Monolayers

Strain-engineering in atomically thin metal dichalcogenides is a useful method for realizing single-photon emitters (SPEs) for quantum technologies. Correlating SPE position with local strain topography is challenging due to localization inaccuracies from the diffraction limit. Currently, SPEs are assumed to be positioned at the highest strained location and are typically identified by randomly screening narrow-linewidth emitters, of which only a few are spectrally pure. In this work, hyperspectral quantum emitter localization microscopy is used to locate 33 SPEs in nanoparticle-strained WSe 2 monolayers with sub-diffraction-limit resolution (≈30 nm) and correlate their positions with the underlying strain field via image registration. In this system, spectrally pure emitters are not concentrated at the highest strain location due to spectral contamination; instead, isolable SPEs are distributed away from points of peak strain with an average displacement of 240 nm. These observations point toward a need for a change in the design rules for strain-engineered SPEs and constitute a key step toward realizing next-generation quantum optical architectures.

2D material↗
DOE OSTI2018

Silicon Oxide‐Rich Diamond‐Like Carbon: A Conformal, Ultrasmooth Thin Film Material with High Thermo‐Oxidative Stability

Abstract Silicon oxide‐containing diamond‐like carbon (a‐C:H:Si:O) films are a promising class of protective coatings for environmentally‐demanding applications owing to their lower residual stresses and superior thermal stability and oxidation resistance relative to undoped diamond‐like carbon. However, existing versions of a‐C:H:Si:O deposited by traditional methods such as plasma‐enhanced chemical vapor deposition (PECVD) undergo substantial degradation and oxidation at temperatures above 250 °C. This, together with the difficulty of PECVD in depositing conformal coatings on complex geometries such as high‐aspect‐ratio features, has limited the applicability of a‐C:H:Si:O. Here, the unique capabilities of plasma immersion ion implantation and deposition (PIIID) to grow silicon oxide‐rich diamond‐like carbon materials that are ultrasmooth, continuous, and conformal on high‐aspect‐ratio topographies are explored. The high concentration of silicon and oxygen in PIIID‐grown films (23 ± 5 at.% and 11 ± 4 at.%, respectively) is unrivalled for this class of materials, and drastically increases the resistance to oxidation at high temperatures, compared with PECVD‐grown films. The results open the path for using a‐C:H:Si:O in applications involving exposure of materials to extreme environments.

Mangolini, Filippo↗
DOE OSTI2020

Molecular and Topographical Organization: Influence on Cicada Wing Wettability and Bactericidal Properties

Numerous natural surfaces have micro/nanostructures that result in extraordinary functionality, such as superhydrophobicity, self-cleaning, antifogging, and antimicrobial properties. One such example is the cicada wing, where differences in nanopillar geometry and composition among species can impact and influence the degree of exhibited properties. To understand the relationships between surface topography and chemical composition with multifunctionality, the wing properties of Neotibicen pruinosus (superhydrophobic) and Magicicada cassinii (hydrophobic) cicadas are investigated at time points after microwave-assisted extraction of surface molecules to characterize the chemical contribution to nanopillar functionality. Electron microscopy of the wings throughout the extraction process illustrates nanoscale topographical changes, while concomitant changes in hydrophobicity, bacterial fouling, and bactericidal properties are also measured. Extract analysis reveals the major components of the nanostructures to be fatty acids and saturated hydrocarbons ranging from C17 to C44. Effects on the antimicrobial character of a wing surface with respect to the extracted chemicals suggest that the molecular composition of the nanopillars plays both a direct and an indirect role in concert with nanopillar geometry. The data presented not only correlates the nanopillar molecular organization to macroscale functional properties, but it also presents design guidelines to consider during the replication of natural nanostructures onto engineered substrates to induce desired properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Rapid changes in agricultural land use and hydrology in the Driftless Region

Annual cropping systems are common in the Driftless Region of the U.S. Midwest, but soil degradation is prone to happen in such systems due to the rugged topography of the region. Recent rapid increases in row crop area have been noted in this region, with annual precipitation and hydrologic extremes on the rise in recent decades. The aim of this research to use geospatial datasets and tools in order to assess the regional trends in land use, precipitation, and hydrologic change and quantify the relationship between these environmental trends. Between 2006 and 2017, substantial row crop expansion of 10,000 ha or more was common across HUC 8 (Hydrologic Unit Code 8) watersheds in our study area. Expansion occurred mainly on steeper slopes, converting existing grasslands or alfalfa (Medicago sativa L.) to row crops. Classifying land as planted (in row crops), plantable (in row crops or could be converted), and unplantable (unable to be converted) revealed that Driftless Region watersheds have ~30–50% of plantable land available for future expansion. Annual precipitation was highly variable during this time period but had a general increasing trend. On average, precipitation showed higher correlation to streamflow compared to row crop expansion across 27 USGS river gage drainage basins in our study area. However, when the increase in row crop area was significant and was accompanied by increasing precipitation, stronger correlation between row crop area and annual streamflow was exhibited. This finding suggests that row crop expansion acts to enhance the effects of increasing precipitation on local hydrology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Tunneling Mode of Scanning Electrochemical Microscopy: Probing Electrochemical Processes at Single Nanoparticles

Abstract Electrochemical experiments at individual nanoparticles (NPs) can provide new insights into their structure–activity relationships. By using small nanoelectrodes as tips in a scanning electrochemical microscope (SECM), we recently imaged individual surface‐bound 10–50 nm metal NPs. Herein, we introduce a new mode of SECM operation based on tunneling between the tip and a nanoparticle immobilized on the insulating surface. The obtained current vs. distance curves show the transition from the conventional feedback response to electron tunneling between the tip and the NP at separation distances of less than about 3 nm. In addition to high‐resolution imaging of the NP topography, the tunneling mode enables measurement of the heterogeneous kinetics at a single NP without making an ohmic contact with it. The developed method should be useful for studying the effects of nanoparticle size and geometry on electrocatalytic activity in real‐world applications.

Sun, Tong↗
DOE OSTI2019

A metrics‐based analysis of seasonal daily precipitation and near‐surface temperature within seven Coordinated Regional Climate Downscaling Experiment domains

We compare ensemble mean daily precipitation and near‐surface temperatures from regional climate model simulations over seven Coordinated Regional Climate Downscaling Experiment domains for the winter and summer seasons. We use Taylor diagrams to show the domain‐wide pattern similarity between the model ensemble and the observational data sets. We use the Climatic Research Unit (CRU) and the University of Delaware gridded observations and ERA‐Interim reanalysis data as an additional observationally based estimate of historical climatology. Taylor diagrams determine the relative skill of the seven sets of simulations and quantify these results in terms of center pattern root‐mean square error and correlation coefficient. Results suggest that there is good agreement between the models and the CRU, in terms of their respective seasonal cycles, as shown in Taylor diagrams and bias plots. There is also good agreement between both gridded observation sets. In addition, downscaled ERA‐Interim precipitation is closer to observations than raw ERA‐Interim precipitation. Domains located in the low latitudes and those having high topography appear to have larger biases, especially precipitation.

Glisan, Justin M.↗