Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spreading models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Empirical comparison of heuristic load distribution in point-to-point multicomputer networks

The study compared several load placement algorithms using instrumented programs and synthetic program models. Salient characteristics of these program traces (total computation time, total number of messages sent, and average message time) span two orders of magnitude. Load distribution algorithms determine the initial placement for processes, a precursor to the more general problem of load redistribution. It is found that desirable workload distribution strategies will place new processes globally, rather than locally, to spread processes rapidly, but that local information should be used to refine global placement.

Grunwald, Dirk C.↗
NASA NTRS1998

An Experimental Investigation of Transition as Applied to Low Pressure Turbine Suction Surface Flows

Results of an experimental study of flow separation and transition in either attached boundary layers or separated shear layers over the suction surface of a simulation of a low-pressure turbine airfoil flow are presented. Detailed velocity profiles were measured with the hot-wire technique. Static pressure distributions are also presented. Flow transition is documented using measured intermittency distributions in the boundary layer and the separated shear layer. Cases for Reynolds numbers of 50,000, 100,000, 200,000 and 300,000 are reported. These Reynolds numbers are based on suction surface length and exit velocity. Three Free Stream Turbulence Intensity values, 0.5%, 2.5% and 10%, are represented. Flow separation is observed for all the low-FSTI cases. Of these, the lowest Reynolds number case was not able to complete transition of the shear layer and the separation bubble persisted over the entire blade surface. For the other low-FSTI cases, transition is observed in the shear layer over the separation bubble. This transition proceeded quickly, spreading rapidly toward the wall. Elevated FSTI drives an earlier transition than in the low-FSTI cases and the separation bubbles are smaller. For the highest Reynolds number cases with 2.5% and 10% FSTI, transition is of the attached boundary layer and no separation exists. Flow separation with shear flow transition is observed for the lower-Re cases. Models for intermittency and transition length and location from the modern literature are assessed.

Qiu, Songgang↗
DOE OSTI2026

Seismic Observations of the OSIRIS-REx Sample Return Capsule Reentry: Deployment, Signal Characteristics, and Wavefield Phenomenology

Controlled spacecraft reentries from interplanetary trajectories provide rare, well-characterized hypersonic sources for advancing seismoacoustic observation techniques. Here we present seismic observations of the OSIRIS-REx sample return capsule (SRC) reentry on 24 September 2023, recorded by 16 three-component nodal seismometers deployed near Eureka, Nevada, at ground distances of 7–20 km from the capsule trajectory. Air-to-ground coupled signals are detected at all stations, exhibiting impulsive onsets consistent with ballistic shock arrivals from the descending Mach cone. We characterize the seismic wavefield through signal amplitude, period, waveform cross-correlation, and array processing. Signal periods decrease systematically with increasing distance from the trajectory within the airport array, indicating that higher-frequency content becomes more prominent at greater offsets, opposite to expectations from geometric spreading and atmospheric absorption. Seismic array processing identifies frequency-dependent back-azimuth variations whose origin remains unresolved; possible contributing factors include source geometry, scattering by fine-scale layered structure in the stratosphere, and near-surface effects. These observations document a spatially complex seismic wavefield from a well-characterized hypersonic line source and provide constraints for future modeling of atmospheric propagation and air-to-ground coupling.

OSIRIS-REx↗
NASA NTRS1975

Analytical simulation of the far-field jet noise and the unsteady jet flow-field by a model of periodic shedding of vortex ring from the jet exit

The construction of a theoretical flow field due to shedding of vortex rings, the identification of the controlling parameters, and the determination of whether the theoretical model successfully simulated the unsteady pressure field near jet (and consequently the far field noise) was studied. The basic parameters contained in the analytic solutions were the epoch at which a vortex ring was shed near the jet exit and the eddy viscosity coefficient. These parameters were identified from the experimental data for the real-time pressure and from the spread of the mixing layer of the jet. Results of the theoretical analysis show good qualitative agreement with the experimental data.

Liu, C. H.↗
NASA NTRS1978

Topside sounder observations of equatorial bubbles

Large scale regions of depleted equatorial ionospheric plasma, called equatorial bubbles, are investigated using topside sounder data. The sounder's unique remote measuring capability enables the magnetic field-aligned nature of the bubbles to be investigated. A search of all available Alouette 2 and ISIS 1 ionograms during nighttime perigee passes near the magnetic equator has revealed a variety of echo signatures associated with bubbles. In addition to a sudden drop in electron density, these signatures usually include in situ spread F and ducted traces. The ducted traces have been used to determine the electron density distribution and to infer changes in ion composition along the magnetic field line within the duct associated with the bubble. In some cases it can be determined that the bubble is asymmetric with respect to the magnetic equator. Even though such features require 3 dimensional models for their explanation, the great field-aligned extent of the bubbles (relative to their cross section) suggests that current theories, which ignore variations along the magnetic field, are still applicable.

Dyson, P. L.↗
NASA NTRS1992

Observations of highly ionized gas in the Galactic halo

A sample of high-quality sight lines is studied by means of IUE spectra to study the formation of Si IV, C IV, and N V in the Galaxy and constrain the mechanisms of halo gas formation. High-dispersion IUE spectra are taken for 12 objects to give combined spectra for studying the halo gas along the sight lines. N V absorption is reported in 10 of the sightlines suggesting that hot collisionally ionized gas dominates the Galactic halo. Analyses are conducted to derive the Doppler-spread parameters of the Si IV, C IV, and N V components that are theorized to dominate the collisionally ionized gas. The observed column-density ratios of the high ions are given and shown to be generally constant throughout the Galaxy with no variation according to the distance of the absorbing gas from the Galactic plane. Existing photoionization and collisional models cannot simultaneously predict the column densities and ratios of Si IV, C IV, and N V. It is concluded that the implementation of self-ionization and other mechanisms could make the models more effective.

Sembach, Kenneth R.↗
NASA NTRS1992

Design of fabric preforms for double diaphragm forming

Resin Transfer Molding (RTM) has the potential of becoming one of the most cost effective ways of producing composite structures since the raw materials used, resin and dry fabric, are less costly than prepregs. Unfortunately these low material costs are offset by the high labor costs incurred to layup the dry fabric into 3D shapes. To reduce the layup costs, double diaphragm forming is being investigated as a potential technique for creating a complex 3D preform from a simple flat layup. As part of our effort to develop double diaphragm forming into a production capable process, we have undertaken a series of experiments to investigate the interactions between process parameters, mold geometry, fabric weave, tow size, and the quality of the formed part. The results of these tests will be used to determine the forming geometry limitations of double diaphragm forming and to characterize the formability of fabric configurations. An important part of this work was the development of methods to measure and analyze fiber orientations, deformation angles, tow spreading, and shape conformation of the formed parts. This paper will describe the methods used to mark plies, the double diaphragm forming process, the techniques used to measure the formed parts, and the calculation of the parameters of interest. The results can be displayed as 3D contour plots. These experimental results have also been used to verify and improve a computer model which simulates the draping of fabrics over 3D mold shapes.

Luby, Steven↗
NASA NTRS1960

Ranger Spacecraft

The thermal-control philosophy of the spacecraft currently under development by the Jet Propulsion Laboratory is design by passive means to maintain all components within the tolerances specified by cognizant engineers. Due to the complexity of the configurations, calculations are) of necessity, fairly generalized and final design is based upon tests in an environmental chamber. The Ranger series spacecraft is designed with a basic structure which is common to all models, with additional hardware to suit the individual mission. This basic structure of Rangers A-1 and A-2 is seen as the hexagonal instrument section, the erectable solar panels, the movable antenna, and the omniantenna. The Ranger A-1 and A-2 configuration is for engineering tests and space-exploration, with the scientific instrumentation isolation requirement dictating the spread-out design. The spacecraft stands 12 feet high, weighs 700 to 800 pounds, and has an internal power of 150 watts. Rangers A-3, A-4, and A-5 are designed to rough land a capsule on the moon. For these, a capsule and retrorocket replace the scientific instruments, occupying the space inside the tower structure. The spacecraft must survive many environments. Chronologically they are: 1) Folded configuration inside an aerodynamic shroud on the pad. 2) Thermal flux from shroud aerodynamically heated during boost phase. 3) Coasting up to 30 minutes attached to Agena stage after booster and shroud are separated. 4) Agena stage burning. 5) Coasting and tumbling after separation from Agena until it passes from earth's shadow. 6) Upon reaching sunlight, panels open and begin sun acquisition. 7) Antenna seeks earth after spacecraft locks onto sun. 8) Space phase- "steady state" with vehicle's vertical axis locked on sun, communicating with earth. The philosophy is to design for the sun-acquired mode, making allowances for the transient conditions.

Thostesen, T. O.↗
NASA NTRS1992

The RBE-LET relationship for rodent intestinal crypt cell survival, testes weight loss, and multicellular spheroid cell survival after heavy-ion irradiation

This report presents data for survival of mouse intestinal crypt cells, mouse testes weight loss as an indicator of survival of spermatogonial stem cells, and survival of rat 9L spheroid cells after irradiation in the plateau region of unmodified particle beams ranging in mass from 4He to 139La. The LET values range from 1.6 to 953 keV/microns. These studies examine the RBE-LET relationship for two normal tissues and for an in vitro tissue model, multicellular spheroids. When the RBE values are plotted as a function of LET, the resulting curve is characterized by a region in which RBE increases with LET, a peak RBE at an LET value of 100 keV/microns, and a region of decreasing RBE at LETs greater than 100 keV/microns. Inactivation cross sections (sigma) for these three biological systems have been calculated from the exponential terminal slope of the dose-response relationship for each ion. For this determination the dose is expressed as particle fluence and the parameter sigma indicates effect per particle. A plot of sigma versus LET shows that the curve for testes weight loss is shifted to the left, indicating greater radiosensitivity at lower LETs than for crypt cell and spheroid cell survival. The curves for cross section versus LET for all three model systems show similar characteristics with a relatively linear portion below 100 keV/microns and a region of lessened slope in the LET range above 100 keV/microns for testes and spheroids. The data indicate that the effectiveness per particle increases as a function of LET and, to a limited extent, Z, at LET values greater than 100 keV/microns. Previously published results for spread Bragg peaks are also summarized, and they suggest that RBE is dependent on both the LET and the Z of the particle.

Non-NASA Center↗
NASA NTRS2007

Experimental Measurements of Two-dimensional Planar Propagating Edge Flames

The study of edge flames has received increased attention in recent years. This work reports the results of a recent study into two-dimensional, planar, propagating edge flames that are remote from solid surfaces (called here, free-layer flames, as opposed to layered flames along floors or ceilings). They represent an ideal case of a flame propagating down a flammable plume, or through a flammable layer in microgravity. The results were generated using a new apparatus in which a thin stream of gaseous fuel is injected into a low-speed laminar wind tunnel thereby forming a flammable layer along the centerline. An airfoil-shaped fuel dispenser downstream of the duct inlet issues ethane from a slot in the trailing edge. The air and ethane mix due to mass diffusion while flowing up towards the duct exit, forming a flammable layer with a steep lateral fuel concentration gradient and smaller axial fuel concentration gradient. We characterized the flow and fuel concentration fields in the duct using hot wire anemometer scans, flow visualization using smoke traces, and non-reacting, numerical modeling using COSMOSFloWorks. In the experiment, a hot wire near the exit ignites the ethane air layer, with the flame propagating downwards towards the fuel source. Reported here are tests with the air inlet velocity of 25 cm/s and ethane flows of 967-1299 sccm, which gave conditions ranging from lean to rich along the centerline. In these conditions the flame spreads at a constant rate faster than the laminar burning rate for a premixed ethane air mixture. The flame spread rate increases with increasing transverse fuel gradient (obtained by increasing the fuel flow rate), but appears to reach a maximum. The flow field shows little effect due to the flame approach near the igniter, but shows significant effect, including flow reversal, well ahead of the flame as it approaches the airfoil fuel source.

Villa-Gonzalez, Marcos↗
NASA NTRSDate not supplied

Improving the Representation of Land Surface Processes Using the Data Assimilation Research Testbed (DART)

The land surface is a critical part of the earth system as processes related to water, carbon, energy and nitrogen cycling have important implications for climate forcing, air quality, water availability and seasonal atmospheric forecasting. Despite advances in land surface modeling, land surface model performance is often limited because of errors related to initial and boundary conditions, model structure, and parameters. Data assimilation (DA) techniques combined with an expanding network of earth system observations present an opportunity to reduce these errors and improve simulations. Here, we emphasize the implementation of tools and approaches to overcome challenges related to land DA to constrain carbon and water cycling. In particular, we discuss the implementation of adaptive inflation to modify ensemble spread in response to time-varying networks of gridded observations. We also discuss methods to generate ensemble spread through boundary condition (meteorology) forcing that can be applied to site-level applications. Next, we describe the application of vertical localization upon surface soil moisture observations, and forward operators specifically designed for the assimilation of snow and solar-induced fluorescence observations. Finally, we discuss the potential benefit of a quantile conserving filter used to update bounded quantities (state or parameter values).

Brett Raczka↗
DOE OSTI2021

Computational fluid dynamics modeling and analysis of silica nanoparticle synthesis in a flame spray pyrolysis reactor

Flame Spray Pyrolysis (FSP) is a method for large-scale production of nanoparticles and nanoscale powders employed in a wide range of industrial applications. Particle size and morphology are complex functions of the physicochemical phenomena occurring in the FSP reactor. An extensive study of FSP-related phenomena can be utilized to develop effective strategies for achieving desired particle size/morphology and scaling up the overall yield of an FSP system. In this work, a computational fluid dynamics (CFD) model of an FSP reactor is developed to simulate the coupling of key phenomena involved in the particle synthesis process: liquid spray breakup and evaporation, mixing, combustion, and particle formation/growth of silica nanoparticles. Herein, the particle sizes and their distributions from the CFD simulations are validated against experimental data. Subsequently, the simulations are utilized to investigate the impact of process parameters on the resultant flame dynamics and particle growth. Firstly, the CFD results show that the particle sizes are strongly correlated with the precursor concentration in the solvent. At lower precursor concentrations, the spread of the distribution is relatively insensitive to the value of the concentration. At higher concentrations, the spread is higher as the collision probability between particles is higher. Secondly, increasing the pilot flow rate increases the length of the pilot flames impacting the local ignition location of the spray flame. Lastly, it is shown that the dispersion gas flow rate strongly influences the spray flame shape. This shape can be used for control of particle growth as it helps determine the regions of high temperature and the residence time of the particles in the high temperature region enabling the design and process optimization of the FSP reactor.

42 ENGINEERING↗
DOE OSTI2024

Impact of Momentum Perturbation on Convective Boundary Layer Turbulence

Mesoscale-to-microscale coupling is an important tool for conducting turbulence-resolving multiscale simulations of realistic atmospheric flows, which are crucial for applications ranging from wind energy to wildfire spread studies. Different techniques are used to facilitate the development of realistic turbulence in the large-eddy simulation (LES) domain while minimizing computational cost. Here, we explore the impact of a simple and computationally efficient Stochastic Cell Perturbation method using momentum perturbation (SCPM-M) to accelerate turbulence generation in boundary-coupled LES simulations using the Weather Research and Forecasting model. We simulate a convective boundary layer (CBL) to characterize the production and dissipation of turbulent kinetic energy (TKE) and the variation of TKE budget terms. Furthermore, we evaluate the impact of applying momentum perturbations of three magnitudes below, up to, and above the CBL on the TKE budget terms. Momentum perturbations greatly reduce the fetch associated with turbulence generation. When applied to half the vertical extent of the boundary layer, momentum perturbations produce an adequate amount of turbulence. However, when applied above the CBL, additional structures are generated at the top of the CBL, near the inversion layer. The magnitudes of the TKE budgets produced by SCPM-M when applied at varying heights and with different perturbation amplitudes are always higher near the surface and inversion layer than those produced by No-SCPM, as are their contributions to the TKE. This study provides a better understanding of how SCPM-M reduces computational costs and how different budget terms contribute to TKE in a boundary-coupled LES simulation.

17 WIND ENERGY↗
DOE OSTI2024

Did the exposure of coacervate droplets to rain make them the first stable protocells?

Membraneless coacervate microdroplets have long been proposed as model protocells as they can grow, divide, and concentrate RNA by natural partitioning. However, the rapid exchange of RNA between these compartments, along with their rapid fusion, both within minutes, means that individual droplets would be unable to maintain their separate genetic identities. Hence, Darwinian evolution would not be possible, and the population would be vulnerable to collapse due to the rapid spread of parasitic RNAs. In this study, we show that distilled water, mimicking rain/freshwater, leads to the formation of electrostatic crosslinks on the interface of coacervate droplets that not only suppress droplet fusion indefinitely but also allow the spatiotemporal compartmentalization of RNA on a timescale of days depending on the length and structure of RNA. We suggest that these nonfusing membraneless droplets could potentially act as protocells with the capacity to evolve compartmentalized ribozymes in prebiotic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

A simplified model of the turbulent microburst

A simple model was developed to describe the low altitude shear associated with a microburst (or small downburst) in the atmosphere. Such microbursts are thought to be the cause of convective radial flows near the ground which represent potentially hazardous conditions to aircraft during approach and landing. Closed form solutions are presented for the equations of mass, momentum, and thermal energy to give the spreading rate of the microburst and the velocity and temperature decay due to turbulence. An analysis of the impact of the microburst and its radial spreading over the ground is given and illustrated examples are provided. The solution for the downward and outward wind velocities are given in terms of simple dimensionless algebraic parameters which can be computed readily in realtime during a piloted simulation of an aircraft flying through a microburst.

Roberts, L.↗
NASA NTRS1998

Re-Observing the First Hours of Supernova 1987A

This project was designed to use archival data from the International Ultraviolet Explorer (IUE) to measure the flux from the shock breakout from SN 1987A, emitted in the first few hours of the event, reflected from neighboring dust clouds in the form of a light echo. Such hot flux from the initial moments of a SN had never been observed before, and this offers a unique opportunity to measure it in reflection. Gilmozzi (1991, in "SN 1987A and Other Supernova") had reported such a detection of using IUE from observations made in 1988 and 1989. Our analysis of these data showed that this detection was very weak, and subject to changes comparable to the size of the signal according to various reasonable means of extracting the spectra. In fact, the features reported by Gilmozzi (1998 in "Ultraviolet Astrophysics Beyond IUE") are not found in a conventional NEWSIPS extraction or extended-source extraction of these data. The 1995 and 1996 IUE data collected for Crotts and Gilmozzi shows a more robust signal (about 20sigma,) from a cloud that echoes brighter in the optical than the 1988 feature. This shows a well-detected signal of about 5 x 10(exp -16) ergs per s/sq cm/Angstroms/arc sq sec at 1300 Angstroms, with a declining slope to redder wavelengths. This surface brightness, while detected with confidence in both large and small SVVT apertures, is still fainter than the reflected flux expected for most models of shock breakout. We have also taken the opportunity to recover the echo signal from exposures taken on Astro-1 and Astro-2 flights of the Ultraviolet Imaging Telescope (UIT) while pointed towards SN 1987A. These data yield a complementary result on the reflected flux, an upper limit of about 5 x 10(exp -17) ergs per s/sq cm/Angstroms/arc sq sec, spread over fainter optically echoing clouds, and over the same band where the signal was detected by IUE. While this appears in contradiction with the IUE result, it is made consistent by the corresponding strengths of the echoes in the optical.

Crotts, Arlin P. S.↗
NASA NTRS2015

Data Applicability of Heritage and New Hardware For Launch Vehicle Reliability Models

Bayesian reliability requires the development of a prior distribution to represent degree of belief about the value of a parameter (such as a component's failure rate) before system specific data become available from testing or operations. Generic failure data are often provided in reliability databases as point estimates (mean or median). A component's failure rate is considered a random variable where all possible values are represented by a probability distribution. The applicability of the generic data source is a significant source of uncertainty that affects the spread of the distribution. This presentation discusses heuristic guidelines for quantifying uncertainty due to generic data applicability when developing prior distributions mainly from reliability predictions.

Al Hassan, Mohammad↗
DOE OSTI2023

Opportunities for wave energy in bulk power system operations

Wave energy resources have high, yet largely untapped potential as candidate generation technology. In this paper, we perform a data-driven analysis to characterize the impact of wave energy integration on bulk-scale power systems and market operations. Through data-driven sensitivity studies centered on an optimization-based production cost modeling formulation, our work characterizes the inflection point beyond which wave integration starts impacting power system operations, considering present day transmission infrastructure. Furthermore, our analysis also considers the joint effects of wave energy integration and system-wide transmission expansion. Finally, potential resilience scenarios such as wildfire-driven transmission contingencies and heat wave events are investigated, whereby the contributions of grid-integrated wave energy in alleviating the effects of the resilience events are analyzed. As our demonstration test bed, we consider a reduced-order network topology for the U.S. Western Interconnection with wave energy generation integrated at carefully selected sites across the coastal areas of Washington, Oregon, and northern California. Our results indicate that over a representative year of operations, wave energy integration systematically reduces locational marginal prices (LMPs) of energy and price volatility, especially during periods of high wave resource availability (winter months for the U.S. west coast). Average, maximum, and minimum of hourly LMPs over a typical year of operation was reduced by 2.95, 51.28, and 1.13 $\$$/MWh respectively (over a baseline scenario with no wave energy integration), when the selected network model had a total of 5000 MW wave power installed capacity during the representative year of study. The effects of wave energy integration can remain localized with existing transmission infrastructure (identified to be most pronounced in the Pacific Northwest region in the example we studied). However, with concurrent transmission expansion, the impacts of wave energy integration are likely to have a higher geographical spread. Our results also indicate that wave energy may be able to assist power system operations during resilience events such as major transmission contingencies and heat wave events, although such benefits might be dependent on factors such as proximity of affected area to wave resources, availability of adequate resource potential and adequate transmission capacity.

16 TIDAL AND WAVE POWER↗