Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Synthesis and different property of yttrium doped ZnS nanoparticles

Yttrium doped ZnS samples Zn{sub 1-x}Y{sub x}S with nominal compositions (x = 0.00, 0.04 and 0.06) were synthesized by a chemical co - precipitation route at room temperature. The synthesized Zn{sub 1-x}Y{sub x}S nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV–VIS spectrometer. XRD patterns revealed that entire peaks corresponding to the various planes of cubic zinc blend structure with no segregation of Y. The lattice parameters were calculated for the Y doped ZnS using XRD data and it found to be slightly smaller than pure ZnS, which indicate substitution of Y in to ZnS lattice. The average crystallite size was calculated using Debye - Scherrer’s formula for pure and Y doped ZnS samples. It is observed that grain size is in the range 30 to 12 nm. Band gap of Y doped ZnS nanoparticles has been calculated using UV-Vis spectrometer. It is found that the band gap decreases as content of Y increases, It may be due the smaller average grain size or ionic radii. The functional groups and chemical interactions of Y substituted Zinc sulfide samples were detected peaks using FTIR spectra and observed the presence of functional groups in the samples. It outlines the formation of ZnS with the stretching vibrational mode around at 511 cm{sup −1}. It is evidently confirmed from FTIR spectra that yttrium substitutes into ZnS lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of inserted Mo layer on the thermal stability of perpendicularly magnetized Ta/Mo/Co{sub 20}Fe{sub 60}B{sub 20}/MgO/Ta films

We studied the thermal stability of perpendicular magnetic anisotropy (PMA) in Ta/Mo/CoFeB/MgO/Ta films with and without inserted Mo layers. In the absence of a Mo layer, the films show PMA at annealing temperatures below 300 °C. On the other hand, the insertion of a Mo layer preserves PMA at annealing temperatures of up to 500 °C; however, a higher annealing temperature leads to the collapse of PMA. X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) were used to study the microstructure of the films to understand the deterioration of PMA. The XPS results show that the segregation of Ta is partly suppressed by inserting a Mo layer. Once inserted, Mo does not remain at the interface of Ta and CoFeB but migrates to the surface of the films. The HRTEM results show that the crystallization of the MgO (001) texture is improved owing to the higher annealing temperature of the Mo inserted sample. A smooth and clear CoFeB/MgO interface is evident. The inserted Mo layer not only helps to obtain sharper and smoother interfaces but also contributes to the crystallization after the higher annealing temperature of films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic origin of strain effects on solute stabilities in iron

Nonuniform strain fields might induce the segregation of alloying solutes and ultimately lead to the mechanical performance degradation of body-centered-cubic (bcc) Fe based steels serving in extreme environments, which is worthy of investigation. In this paper, two typical volume-conserving strains, shear strain (SS) and normal strain (NS), are proposed to investigate the strain effects on solute stabilities in bcc iron by first-principles calculations. For solutes in each transition metal group, the calculated substitution energy change due to SS exhibits a linear dependence on the valence d radius of the solutes, and the slope decreases in an exponential manner as a function of the absolute difference between the Watson's electronegativity of iron and the averaged value of each transition metal group. This regularity is attributed to the Pauli repulsion between the solutes and the nearest neighboring Fe ions modulated by the hybridization of valence d bands and concluded to be originated from the characteristics of valence d bonding between the transition-metal solutes and Fe ions under SS. For main-group and post transition-metal solutes, the considerable drop of substitution energy change due to NS is concluded to be originated from the low-energy side shift of the widened valence s and p bands of the solutes. Our results indicate that the stabilities of substitutional solutes in iron under volume-conserving strain directly correlate with the intrinsic properties of the alloying elements, such as the valence d radius and occupancy, having or not having valence s and p bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of transition metal impurities on the strength of grain boundaries in vanadium

Effects of 3d (Ti-Ni), 4d (Zr-Pd), and 5d (Hf-Pt) transition metal impurities on strength of two representative vanadium grain boundaries (GBs), symmetric Σ3(111) and asymmetric Σ5(210), were studied by first-principles calculations within the framework of the Rice-Wang thermodynamic model and within the computational tensile test. The desirable elements to increase the GB cohesion were predicted based on their segregation and strengthening behaviors across the different GB sites. It reveals that the elements Ti, Zr, Hf, Nb, and Ta are good choices for the GB cohesion enhancers. In addition, the GB strengthening by solutes is sensitive to the GB structures. The elements Cr, Mn, Fe, Co, and Ni decrease the GB strength of the Σ3(111) GB but they can increase the cohesion of the Σ5(210) GB. Furthermore, the origin of Ti-induced change of the GB strength was uncovered by analyzing the atomic bonds and electronic structures as well as the tensile strength. This work provides a theoretical guidance to screen promising alloying elements in V-based materials with improved resistance to GB decohesion and also helps us to understand the formation mechanism of Ti-rich precipitates in the V-Cr-Ti alloys under neutron or ion irradiation environments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the InGaAs/(Al)GaAs quantum-well heterostructure growth features on the spectral characteristics of laser diodes

An abrupt decrease in the lasing wavelength was observed with increasing the pump current in injection semiconductor lasers emitting in the spectral range from 1050 to 1080 nm. The consideration of segregation phenomena, which strongly distort the nominal profile of the quantum-well active region of InGaAs/(Al)GaAs laser heterostructures during their growth, made it possible to calculate the energy spectrum of these heterostructures, which agrees with the results of spectral measurements. The energy levels of dimensional quantisation involved in lasing with decreasing the laser wavelength are identified based on the calculation. (lasers. amplifiers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Covalent Metal-Nanotube Heterojunctions as Ultimate Nano-Contacts

We report the controlled formation and characterization of heterojunctions between carbon nanotubes and different metal nanocrystals (Fe, Co, Ni, and FeCo). The heterojunctions are formed from metal-filled multiwall carbon nanotubes (MWNTs) via intense electron beam irradiation at temperatures in the range of 450-700 C and observed in situ in a transmission electron microscope. Under irradiation, the segregation of metal and carbon atoms occurs, leading to the formation of heterojunctions between metal and graphite. Metallic conductivity of the metal-nanotube junctions was found by using in situ transport measurements in an electron microscope. Density functional calculations show that these structures are mechanically strong, the bonding at the interface is covalent, and the electronic states at and around the Fermi level are delocalized across the entire system. These properties are essential for the application of such heterojunctions as contacts in electronic devices and vital for the fabrication of robust nanotube-metal composite materials.

36 MATERIALS SCIENCE↗

Heterozygosity for a Bub1 mutation causes female-specific germ cell aneuploidy in mice

Aneuploidy, the most common chromosomal abnormality at birth and the main ascertained cause of pregnancy loss in humans, originates primarily from chromosome segregation errors during oogenesis. Here we report that heterozygosity for a mutation in the mitotic checkpoint kinase gene, Bub1, induces aneuploidy in female germ cells of mice, and that the effect increases with advancing maternal age. Analysis of Bub1 heterozygous oocytes showed that aneuploidy occurred primarily during the first meiotic division and involved premature sister chromatid separation. Furthermore, aneuploidy was inherited in zygotes and resulted in the loss of embryos after implantation. The incidence of aneuploidy in zygotes was sufficient to explain the reduced litter size in matings with Bub1 heterozygous females. No effects were seen in germ cells from heterozygous males. These findings show that Bub1 dysfunction is linked to inherited aneuploidy in female germ cells and may contribute to the maternal age-related increase in aneuploidy and pregnancy loss.

59 BASIC BIOLOGICAL SCIENCES↗

Modification of Deeply Buried Hydrophobic Interfaces by Ionic Surfactants

Hydrophobicity, the spontaneous segregation of oil and water, can be modified by surfactants. The way this modification occurs is studied at the oil-water interface for a range of alkanes and two ionic surfactants. A liquid interfacial monolayer, consisting of a mixture of alkane molecules and surfactant tails, is found. Upon cooling, it freezes at T{sub s}, well above the alkane's bulk freezing temperature, T{sub b}. The monolayer's phase diagram, derived by surface tensiometry, is accounted for by a mixtures-based theory. The monolayer's structure is measured by high-energy X-ray reflectivity above and below T{sub s}. A solid-solid transition in the frozen monolayer, occurring approximately 3 C below T{sub s}, is discovered and tentatively suggested to be a rotator-to-crystal transition.

99 GENERAL AND MISCELLANEOUS↗

Investigation of the role of hydrophilic chain length in amphiphilic perfluoropolyether/poly(ethylene glycol) networks: towards high-performance antifouling coatings

The facile preparation of amphiphilic network coatings having a hydrophobic dimethacryloxy-functionalized perfluoropolyether (PFPE-DMA; M{sub w} = 1500 g mol{sup -1}) crosslinked with hydrophilic monomethacryloxy functionalized poly(ethylene glycol) macromonomers (PEG-MA; M{sub w} = 300, 475, 1100 g mol{sup -1}), intended as non-toxic high-performance marine coatings exhibiting antifouling characteristics is demonstrated. The PFPE-DMA was found to be miscible with the PEG-MA. Photo-cured blends of these materials containing 10 wt% of PEG-MA oligomers did not swell significantly in water. PFPE-DMA crosslinked with the highest molecular weight PEG oligomer (ie PEG1100) deterred settlement (attachment) of algal cells and cypris larvae of barnacles compared to a PFPE control coating. Dynamic mechanical analysis of these networks revealed a flexible material. Preferential segregation of the PEG segments at the polymer/air interface resulted in enhanced antifouling performance. The cured amphiphilic PFPE/PEG films showed decreased advancing and receding contact angles with increasing PEG chain length. In particular, the PFPE/PEG1100 network had a much lower advancing contact angle than static contact angle, suggesting that the PEG1100 segments diffuse to the polymer/water interface quickly. The preferential interfacial aggregation of the larger PEG segments enables the coating surface to have a substantially enhanced resistance to settlement of spores of the green seaweed Ulva, cells of the diatom Navicula and cypris larvae of the barnacle Balanus amphitrite as well as low adhesion of sporelings (young plants) of Ulva, adhesion being lower than to a polydimethyl elastomer, Silastic T2.

36 MATERIALS SCIENCE↗

In situ investigation of high-pressure melting behavior in the Fe-S system using synchrotron X-ray radiography

We studied the high-pressure melting behavior of Fe-S mixtures containing 9 wt% sulfur using the synchrotron X-ray radiographic method in a large volume press. By opening two graphite windows along the X-ray path and using boron nitride capsules, we were able to observe segregation of sulfur-rich liquid and iron-rich solid upon initial melting and determine the eutectic temperature of the Fe-S system at pressures between 13 and 16 GPa. Our results are in excellent agreement with the existing data from quench experiments, and are further supported by in situ X-ray diffraction measurements. The liquidus temperatures of this composition, determined on the basis of the disappearance of the solid phase on the radiographs, are also consistent with literature values. By observing radiographic changes with time, we monitored the approach to equilibrium and obtained preliminary data on the kinetics of the melting process.

43 PARTICLE ACCELERATORS↗

Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300°C

Commercial precipitation-hardened Al-Cu alloys are normally used at temperatures below its ageing temperature of ~225°C, to avoid thermally induced precipitate coarsening and resultant softening. Making such popular Al alloys creep resistant at or above 300°C is thus challenging. Here we present a modified precipitation protocol, exploiting Sc-microalloying and a carefully designed three-step heat treatment to enhance Sc segregation at the matrix/θ'-Al 2 Cu precipitate interfaces. The stabilized nanoprecipitates enable an order-of-magnitude reduction in creep rate at 300°C, demonstrating the room for microstructure improvement and the potential for property elevation in traditional engineering alloys through innovative processing coupled with synergetic alloying elements.

36 MATERIALS SCIENCE↗

LUMINOSITY FUNCTIONS OF SPITZER-IDENTIFIED PROTOSTARS IN NINE NEARBY MOLECULAR CLOUDS

We identify protostars in Spitzer surveys of nine star-forming (SF) molecular clouds within 1 kpc: Serpens, Perseus, Ophiuchus, Chamaeleon, Lupus, Taurus, Orion, Cep OB3, and Mon R2, which combined host over 700 protostar candidates. These clouds encompass a variety of SF environments, including both low-mass and high-mass SF regions, as well as dense clusters and regions of sparsely distributed star formation. Our diverse cloud sample allows us to compare protostar luminosity functions in these varied environments. We combine near- and mid-infrared photometry from the Two Micron All Sky Survey and Spitzer to create 1-24 {mu}m spectral energy distributions (SEDs). Using protostars from the c2d survey with well-determined bolometric luminosities, we derive a relationship between bolometric luminosity, mid-IR luminosity (integrated from 1-24 {mu}m), and SED slope. Estimations of the bolometric luminosities for protostar candidates are combined to create luminosity functions for each cloud. Contamination due to edge-on disks, reddened Class II sources, and galaxies is estimated and removed from the luminosity functions. We find that luminosity functions for high-mass SF clouds (Orion, Mon R2, and Cep OB3) peak near 1 L{sub Sun} and show a tail extending toward luminosities above 100 L{sub Sun }. The luminosity functions of the low-mass SF clouds (Serpens, Perseus, Ophiuchus, Taurus, Lupus, and Chamaeleon) do not exhibit a common peak, however the combined luminosity function of these regions peaks below 1 L{sub Sun }. Finally, we examine the luminosity functions as a function of the local surface density of young stellar objects. In the Orion molecular clouds, we find a significant difference between the luminosity functions of protostars in regions of high and low stellar density, the former of which is biased toward more luminous sources. This may be the result of primordial mass segregation, although this interpretation is not unique. We compare our luminosity functions to those predicted by models and find that our observed luminosity functions are best matched by models that invoke competitive accretion, although we do not find strong agreement between the high-mass SF clouds and any of the models.

79 ASTRONOMY AND ASTROPHYSICS↗

Suites of dwarfs around Nearby giant galaxies

The Updated Nearby Galaxy Catalog (UNGC) contains the most comprehensive summary of distances, radial velocities, and luminosities for 800 galaxies located within 11 Mpc from us. The high density of observables in the UNGC makes this sample indispensable for checking results of N-body simulations of cosmic structures on a ∼1 Mpc scale. The environment of each galaxy in the UNGC was characterized by a tidal index Θ{sub 1}, depending on the separation and mass of the galaxy's main disturber (MD). We grouped UNGC galaxies with a common MD in suites, and ranked suite members according to their Θ{sub 1}. All suite members with positive Θ{sub 1} are assumed to be physical companions of the MD. About 58% of the sample are members of physical groups. The distribution of suites by the number of members, n, follows a relation N(n) ∼ n {sup –2}. The 20 most populated suites contain 468 galaxies, i.e., 59% of the UNGC sample. The fraction of MDs among the brightest galaxies is almost 100% and drops to 50% at M{sub B} = –18{sup m}. We discuss various properties of MDs, as well as galaxies belonging to their suites. The suite abundance practically does not depend on the morphological type, linear diameter, or hydrogen mass of the MD, the tightest correlation being with the MD dynamical mass. Dwarf galaxies around MDs exhibit well-known segregation effects: the population of the outskirts has later morphological types, richer H I contents, and higher rates of star formation activity. Nevertheless, there are some intriguing cases where dwarf spheroidal galaxies occur at the far periphery of the suites, as well as some late-type dwarfs residing close to MDs. Comparing simulation results with galaxy groups, most studies assume the Local Group is fairly typical. However, we recognize that the nearby groups significantly differ from each other and there is considerable variation in their properties. The suites of companions around the Milky Way and M31, consisting of the Local Group, do not quite seem to be a typical nearby group. The multiplicity of nearby groups of the number of their physical members can be described by the Hirsh-like index h{sub g} = 9, indicating that the Local Volume contains nine groups with populations exceeding nine companions to their MDs.

79 ASTRONOMY AND ASTROPHYSICS↗

Photometric and structural properties of NGC 6544: A combined VVV-Hubble space telescope study

We combine archival Hubble Space Telescope imaging with wide-field near-infrared photometry to study the neglected metal-poor Galactic globular cluster NGC 6544. A high spatial resolution map of differential reddening over the inner portion of the cluster is constructed, revealing variations of up to half of the total reddening, and the resulting corrected color-magnitude diagrams reveal a sparse blue horizontal branch and centrally concentrated blue straggler population, verified via relative proper motions. Using the corrected photometry to investigate the cluster distance, reddening, and age via direct comparison to well-calibrated photometry of clusters with similar metallicities, we estimate (m – M){sub 0} = 11.96, E(B – V) = 0.79, and an age coeval with M13 to within the relevant uncertainties. Although our data are insufficient to place tight constraints on the reddening law toward NGC 6544, we find no strong evidence that it is non-standard at optical or near-infrared wavelengths. We also provide near-infrared fiducial sequences extending nearly 2 mag below the cluster main sequence turnoff, generated from a statistically decontaminated sample of cluster stars. Lastly, we redetermine the cluster center and construct a radial number density profile which is well fit by an atypically flat power law with a slope of about 1.7. We discuss this result, together with a flattened main sequence luminosity function and inverted mass function, in the context of mass segregation and tidal stripping via interactions with Milky Way potential.

79 ASTRONOMY AND ASTROPHYSICS↗

SPITZER DETECTION OF POLYCYCLIC AROMATIC HYDROCARBONS AND SILICATE FEATURES IN POST-AGB STARS AND YOUNG PLANETARY NEBULAE

We have observed a small sample of hot post-asymptotic giant branch (AGB) stars with the Infrared Array Camera (IRAC) and the Infrared Spectrograph (IRS) on board the Spitzer Space Telescope. The stars were selected from the literature on the basis of their far-infrared (IR) excess (i.e., post-AGB candidates) and B spectral type (i.e., close to the ionization of the envelope). The combination of our IRAC observations with Two Micron All Sky Survey and IRAS catalog data, along with previous radio observations in the cm range (where available) allowed us to model the spectral energy distributions of our targets and find that in almost all of them at least two shells of dust at different temperatures must be present, the hot dust component ranging up to 10{sup 3} K. In several targets, grains larger than 1 {mu}m are needed to match the far-IR data points. In particular, in IRAS 17423-1755 grains up to 100 {mu}m must be introduced to match the emission in the millimeter range. We obtained IRS spectra to identify the chemistry of the envelopes and found that more than one-third of the sources in our sample have mixed chemistry, showing both mid-IR bands attributed to polycyclic aromatic hydrocarbons (PAHs) and silicate features. The analysis of the PAH features indicates that these molecules are located in the outflows, far away from the central stars. We consider the larger than expected percentage of mixed-chemistry targets as a selection bias toward stars with a disk or torus around them. Our results strengthen the current picture of mixed chemistry being due to the spatial segregation of different dust populations in the envelopes.

79 ASTRONOMY AND ASTROPHYSICS↗

STRUCTURAL PARAMETERS OF THE MESSIER 87 GLOBULAR CLUSTERS

We derive structural parameters for approx2000 globular clusters in the giant Virgo elliptical Messier 87 (M87) using extremely deep Hubble Space Telescope images in F606W (V) and F814W (I) taken with the ACS/WFC. The cluster scale sizes (half-light radii r{sub h} ) and ellipticities are determined from point-spread-function -convolved King-model profile fitting. We find that the r{sub h} distribution closely resembles the inner Milky Way clusters, peaking at r{sub h} approx = 2.5 pc and with virtually no clusters more compact than r{sub h} approx = 1 pc. The metal-poor clusters have on average an r{sub h} 24% larger than the metal-rich ones. The cluster scale size shows a gradual and noticeable increase with galactocentric distance. Clusters are very slightly larger in the bluer waveband V, a possible hint that we may be beginning to see the effects of mass segregation within the clusters. We also derived a color magnitude diagram for the M87 globular cluster system which shows a striking bimodal distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

EMBEDDED YOUNG STELLAR OBJECT CANDIDATES IN THE ACTIVE STAR-FORMING COMPLEX W51: MASS FUNCTION AND SPATIAL DISTRIBUTION

We present 737 candidate young stellar objects (YSOs) near the W51 giant molecular cloud over an area of 1.{sup 0}25 x 1.{sup 0}00 selected from Spitzer Space Telescope data. We use spectral energy distribution fits to identify YSOs and distinguish them from main-sequence (MS) or red giant stars, asymptotic giant branch stars, and background galaxies. Based on extinction of each YSO, we separate a total of 437 YSOs associated with the W51 region from the possible foreground sources. We identify 69 highly embedded Stage 0/I candidate YSOs in our field with masses >5 M{sub sun} (corresponding to mid- to early-B MS spectral types), 46 of which are located in the central active star-forming regions of W51A and W51B. From the YSOs associated with W51, we find evidence for mass segregation showing that the most massive YSOs are concentrated on the W51 H II region complex. We find a variation in the spatial distribution of the mass function (MF) of YSOs in the mass range between 5 M{sub sun} and 18 M{sub sun}. The derived slopes of the MF are -1.26 and -2.36 in the active star-forming region and the outer region, respectively. The variation of the MF for YSOs embedded in the molecular cloud implies that the distribution of stellar masses in clusters depends on the local conditions in the parent molecular cloud.

79 ASTRONOMY AND ASTROPHYSICS↗

A CONSTRAINT ON BROWN DWARF FORMATION VIA EJECTION: RADIAL VARIATION OF THE STELLAR AND SUBSTELLAR MASS FUNCTION OF THE YOUNG OPEN CLUSTER IC 2391

We present the stellar and substellar mass function (MF) of the open cluster IC 2391, plus its radial dependence, and use this to put constraints on the formation mechanism of brown dwarfs (BDs). Our multi-band optical and infrared photometric survey with spectroscopic follow-up covers 11 deg{sup 2}, making it the largest survey of this cluster to date. We observe a radial variation in the MF over the range 0.072-0.3 M {sub sun}, but no significant variation in the MF below the substellar boundary at the three cluster radius intervals is analyzed. This lack of radial variation for low masses is what we would expect with the ejection scenario for BD formation, although considering that IC 2391 has an age about three times older than its crossing time, we expect that BDs with a velocity greater than the escape velocity have already escaped the cluster. Alternatively, the variation in the MF of the stellar objects could be an indication that they have undergone mass segregation via dynamical evolution. We also observe a significant variation across the cluster in the color of the (background) field star locus in color-magnitude diagrams and conclude that this is due to variable background extinction in the Galactic plane. From our preliminary spectroscopic follow-up, to confirm BD status and cluster membership, we find that all candidates are M dwarfs (in either the field or the cluster), demonstrating the efficiency of our photometric selection method in avoiding contaminants (e.g., red giants). About half of our photometric candidates for which we have spectra are spectroscopically confirmed as cluster members; two are new spectroscopically confirmed BD members of IC 2391.

79 ASTRONOMY AND ASTROPHYSICS↗