Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

High piezoelectricity of Pb(Zr,Ti)O{sub 3}-based ternary compound thin films on silicon substrates

Pb(Zr,Ti)O{sub 3} (PZT)-based ternary compound thin films, 0.06PMnN-0.94PZT(50/50) (PMnN-PZT), are deposited on Si-based heterostructures by rf magnetron sputtering system. The intrinsic PZT(50/50) thin films are also deposited on the same kind of substrates for comparison. The PMnN-PZT thin films show the similar polycrystalline structures as those of PZT with highly (111) oriented perovskite phase. The PMnN-PZT thin films show excellent piezoelectricity and ferroelectricity which are distinctly better than those of PZT thin films prepared with the same deposition conditions. Besides, the cantilevers of PMnN-PZT thin films on the heterostructure substrates also exhibit higher sensitivities than the PZT thin film cantilevers.

36 MATERIALS SCIENCE↗

Ion Beam Analysis of the Thermal Stability of Hydrogenated Diamond-Like Carbon Thin Films on Si Substrate

Unbalanced magnetron sputtering deposition of C-H films has been performed with various levels of negative substrate bias and with a fixed flow rate of hydrogen. Argon was used as a sputtering gas and formed the majority of the gas in the plasma. The effect of hydrogenation on the final concentration of trapped elements and their thermal stability with respect to hydrogen content is studied using ion beam analysis (IBA) techniques. The elemental concentrations of the films were measured in the films deposited on silicon substrates with a 2.5 MeV of H{sup +} beam, which is used to perform Rutherford Backscattering Spectrometry (RBS) and Non-Rutherford Backscattering spectrometry (NRBS) and with 16 MeV of O{sup 5+} beam, used to perform Elastic Recoil Detection Analysis (ERDA). Effect of bias on the thermal stability of trapped hydrogen in the films has been studied. As the films were heated in-situ in vacuum using a non-gassy button heater, hydrogen was found to be decreasing around 400 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal strain-induced dielectric anisotropy in Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thin films grown on silicon-based substrates

Dielectric properties of Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) thin films, which were prepared on silicon-based substrates by ion beam sputtering and postdeposition annealing method, were systematically investigated in different electrode configurations of metal-insulator-metal and coplanar interdigital capacitors. It was found that a large dielectric anisotropy exists in the films with better in-plane dielectric properties (higher dielectric permittivity and tunability) than those along the out-of-plane direction. The observed anisotropic dielectric responses are explained qualitatively in terms of a thermal strain effect that is related to dissimilar film strains along the in-plane and out-of-plane directions. Another reason for the dielectric anisotropy is due to different influences of the interfacial low-dielectric layer between the BST film and the substrate (metal electrode).

36 MATERIALS SCIENCE↗

ZnO-based metal-semiconductor field-effect transistors on glass substrates

We investigate the influence of quartz glass and borosilicate glass substrates on the electrical properties of ZnO-based metal-semiconductor field-effect transistors (MESFETs). The n-type ZnO thin-film channels were grown by pulsed-laser deposition and MESFETs were processed by reactive dc sputtering of Ag{sub x}O-Schottky gate contacts. All devices are in the normally-off state. They exhibit very low off-currents in the range of 10{sup -13} A and on/off ratios of maximum 6 decades. The channel mobilities are highest for ZnO on quartz with 1.3 cm{sup 2}/Vs. The glass substrates introduce a compensating effect on the conduction of the ZnO channel resulting in higher on/off-voltages and lower on-current.

36 MATERIALS SCIENCE↗

Vapor-Liquid-Solid Synthesis of Ge Nanowire on H-terminated Si Substrate

The synthesis of Ge nanowires on H-terminated Si substrate is discussed in detail. The surface condition, growth temperature and substrate orientation have the important influences on the growth of Ge nanowires. Without HF treatment, it is difficult to grow high density Ge nanowires. After removal of SiO{sub 2} overlayer caused by silicon migration and nature oxidization, high-density Ge nanowires can be grown.

36 MATERIALS SCIENCE↗

Morphological Stability and Specific Resistivity of sub-10 nm Silicide Films of Ni1 xPtx on Si Substrate

This letter studies the morphological stability and specific resistivity of sub-10 nm silicide films of Ni, Ni{sub 0.95}Pt{sub 0.05}, and Ni{sub 0.9}Pt{sub 0.1} formed on Si(100) substrate. When the deposited metal films are below 1 to 4 nm in thickness depending on the Pt content, the resultant silicide films tend to become epitaxially aligned to the Si substrate and hence exhibit an extraordinary morphological stability up to 800 C. The presence of Pt in the silicides increases the film resistivity through alloy scattering, but alleviates, owing to a reduced electron mean free path, the frequently encountered sharp increase in resistivity in the sub-10 nm regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the shielding cylinder and substrate on the characteristics of an argon radio-frequency atmospheric glow discharge plasma jet

With unique features of low breakdown voltages, large and uniform discharge areas and high concentrations of chemically reactive species, radio-frequency, atmospheric-pressure glow discharge (rf APGD) plasma sources produced with bare-metallic electrodes have shown promising prospects in the field of materials processing. In this paper, the spatial distributions (i.e., the directly measured integrated axial distribution and the radial distribution by using the inverse Abel transform) of the emission intensities of the Ar I 696.5 nm line are studied for the argon rf APGD plasma jet under different operation conditions, including variations of the rf power input or the argon flow rate, the existence of the solid shielding cylinder or the substrate. The experimental results show that, with other parameters being unchanged, the emission intensities of the Ar I 696.5 nm line increase with increasing the rf power input or the argon flow rate; and the solid shielding cylinder has more significant influences on the characteristics of the plasma impinging jet by reducing the mass flow rate of the ambient air entrained into the plasma jet region than those for the cases without the existence of the substrate at the downstream of the plasma torch nozzle exit.

36 MATERIALS SCIENCE↗

Growth kinetics of AlN and GaN films grown by molecular beam epitaxy on R-plane sapphire substrates

This paper reports the growth by molecular beam epitaxy of AlN and GaN thin films on R-plane sapphire substrates. Contrary to previous findings that GaN grows with its (1120) A-plane parallel to the (1102) R-plane of sapphire, our results indicate that the crystallographic orientation of the III-nitride films is strongly dependent on the kinetic conditions of growth for the GaN or AlN buffer layers. Thus, group III-rich conditions for growth of either GaN or AlN buffers result in nitride films having (1120) planes parallel to the sapphire surface, and basal-plane stacking faults parallel to the growth direction. The growth of these buffers under N-rich conditions instead leads to nitride films with (1126) planes parallel to the sapphire surface, with inclined c-plane stacking faults that often terminate threading dislocations. Moreover, electron microscope observations indicate that slight miscut ({approx}0.5 deg. ) of the R-plane sapphire substrate almost completely suppresses the formation of twinning defects in the (1126) GaN films.

36 MATERIALS SCIENCE↗

Fabrication of SERS Substrate by Multilayered Nanosphere Deposition Technique

Metal film over nanosphere (MFON) has been employed as a reproducible and predictable SERS-active device in biosensing applications. In addition to its economic fabrication process, such substrate can be further processed to a prism-structure with increased SERS enhancement and wider Plasmon tunability. In this work, we investigate an alternative coating method to deposit a larger area of well-ordered PS beads with different sizes (oe = 100nm and 400 nm) onto a glass. The result suggests that the proposed well-coating technique can be suitably used to form closely-packed PS beads with diameter less than 100 nm for developing MFON substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface stoichiometry and activity control for atomically smooth low dislocation density ZnO and pseudomorphic MgZnO epitaxy on a Zn-polar ZnO substrate by the helicon-wave-excited-plasma sputtering epitaxy method

The helicon-wave-excited-plasma sputtering (HWPS) method was exemplified to be one of the versatile epitaxial growth techniques for the fabrication of low dislocation density semiconductor epilayers and heterostructures exhibiting atomically smooth surface morphology. For a case study, ZnO homoepitaxy and Mg{sub x}Zn{sub 1-x}O (x=0.08,0.19) heteroepitaxy on a Zn-polar ZnO substrate were carried out. According to the surface damage-free property, high temperature growth with appropriate stoichiometry control enabled the growth of ZnO homoepitaxial layers exhibiting a smooth surface morphology with 0.26 nm high monolayer atomic steps. Their tilt and twist mosaics reflecting the threading dislocation densities having screw and edge components were comparable to those of the substrate, being under the resolution limit (18 arcsec). The surface morphology and crystal mosaicity of pseudomorphic Mg{sub x}Zn{sub 1-x}O (x{<=}0.19) epilayers were quite similar to those of the ZnO underlayer. The luminescence spectra of the ZnO and Mg{sub x}Zn{sub 1-x}O epilayers at 293 K exhibited a predominant near-band-edge emission and negligible broad emission bands due to deep levels. The results indicate that the growth mode of the HWPS method resembles that of molecular beam epitaxy methods.

36 MATERIALS SCIENCE↗

Straining of SiGe ultrathin films with mesoporous Si substrates

We report on the fabrication and characterization of ultrathin (down to 50 nm) tensile strained SiGe films on mesoporous Si substrates. Low temperature oxidation of the porous substrate relaxes the compressive strain in the as grown monocrystalline (mc) SiGe. Applying this method to a 50 nm thick mc-Si{sub 0.72}Ge{sub 0.28} film, a tensile strain >0.78% can be achieved without compromising crystalline quality and up to 1.45 % without the appearance of cracks.

36 MATERIALS SCIENCE↗

Compositional evolution of SiGe islands on patterned Si (001) substrates

The authors investigate, by atomic-force-microscopy-based nanotomography, the composition evolution of ordered SiGe islands grown on pit-patterned Si (001) substrates as their size and aspect ratio increase with increasing Ge deposition. Compared to islands grown on flat substrates, the ordered island arrays show improved size, shape, and compositional homogeneity. The three-dimensional composition profiles of individual pyramids, domes, and barns reveal that the Ge fraction at the base and in subsurface regions of the islands decreases with increasing amount of deposited Ge.

36 MATERIALS SCIENCE↗

On the polarity of GaN micro- and nanowires epitaxially grown on sapphire (0001) and Si(111) substrates by metal organic vapor phase epitaxy and ammonia-molecular beam epitaxy

The polarity of GaN micro- and nanowires grown epitaxially by metal organic vapor phase epitaxy on sapphire substrates and by molecular-beam epitaxy, using ammonia as a nitrogen source, on sapphire and silicon substrates has been investigated. On Al{sub 2}O{sub 3}(0001), whatever the growth technique employed, the GaN wires show a mixture of Ga and N polarities. On Si(111), the wires grown by ammonia-molecular beam epitaxy are almost entirely Ga-polar (around 90%) and do not show inversion domains. These results can be understood in terms of the growth conditions employed during the nucleation stage.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of metamorphic AlInSb/GaInSb high-electron-mobility-transistor structures on GaAs substrates for low power and high frequency applications

We report on molecular beam epitaxial growth of AlInSb/GaInSb metamorphic high-electron-mobility-transistor structures for low power, high frequency applications on 4 in. GaAs substrates. The structures consist of a Ga{sub 0.4}In{sub 0.6}Sb channel embedded in Al{sub 0.4}In{sub 0.6}Sb barrier layers which are grown on top of an insulating metamorphic buffer, which is based on the linear exchange of Ga versus In and a subsequent exchange of As versus Sb. Precise control of group V fluxes and substrate temperature in the Al{sub 0.4}In{sub 0.6}As{sub 1-x}Sb{sub x} buffer is essential to achieve high quality device structures. Good morphological properties were achieved demonstrated by the appearance of crosshatching and root mean square roughness values of 2.0 nm. Buffer isolation is found to be >100 k{Omega}/{open_square} for optimized growth conditions. Hall measurements at room temperature reveal electron densities of 2.8x10{sup 12} cm{sup -2} in the channel at mobility values of 21.000 cm{sup 2}/V s for single-sided Te volume doping and 5.4x10{sup 12} cm{sup -2} and 17.000 cm{sup 2}/V s for double-sided Te {delta}-doping, respectively.

36 MATERIALS SCIENCE↗

Electric Discharge Sintering and Joining of Tungsten Carbide--Cobalt Composite with High-Speed Steel Substrate

Simultaneous electro discharge sintering of high strength structure of tungsten carbide-cobalt composite and connection it with high-speed steel substrate is investigated and suitable operating parameters are defined. Tungsten carbide-cobalt and high-speed steel joining was produced by the method of high voltage electrical discharge together with application of mechanical pressure to powder compact. It was found that the density and hardness of composite material reach its maximum values at certain magnitudes of applied pressure and high voltage electrical discharge parameters. We show that there is an upper level for the discharge voltage beyond which the powder of composite material disintegrates like an exploding wire. Due to our results it is possible to determine optimal parameters for simultaneous electro discharge sintering of WC-Co and bonding it with high-speed steel substrate.

36 MATERIALS SCIENCE↗

Dislocation engineering in SiGe heteroepitaxial films on patterned Si (001) substrates

We demonstrate dislocation engineering without oxide masks. By using finite element simulations we show how nanopatterning of Si substrates with (111) trenches provides anisotropic elastic relaxation in a SiGe film, generates preferential nucleation sites for dislocation loops, and allows for dislocation trapping, leaving wide areas free of threading dislocations. These predictions are confirmed by atomic force and transmission electron microscopy performed on overcritical Si{sub 0.7}Ge{sub 0.3} films. These were grown by molecular beam epitaxy on a Si(001) substrate patterned with periodic arrays of selectively etched (111)-terminated trenches.

36 MATERIALS SCIENCE↗

Dependence of crystal orientation and bandgap on substrate temperature of molecular-beam epitaxy grown InN on bare Al{sub 2}O{sub 3} (0001)

The issue of variable bandgap values for InN films grown on c-sapphire has been addressed in this work. {alpha}-InN films have been deposited in nitrogen rich condition at different substrate temperatures on bare Al{sub 2}O{sub 3} (0001) by plasma assisted molecular beam epitaxy (PA-MBE). The results of several complementary characterization techniques show that single crystalline wurtzite InN is formed, but their orientation depends on the substrate temperature. The bandgap measured on these samples (1.78 eV) is explained by Moss-Burstein shift on these degenerately n-doped samples. Our results discount effects of crystal orientation, presence of oxygen at grain boundaries and In/N stoichiometry as factors that influence the measured band-gap values.

36 MATERIALS SCIENCE↗

In Situ Synchrotron Based X-ray Fluorescence and Scattering Measurements During Atomic Layer Deposition: Initial Growth of HfO2 on Si and Ge Substrates

The initial growth of HfO{sub 2} was studied by means of synchrotron based in situ x-ray fluorescence (XRF) and grazing incidence small angle x-ray scattering (GISAXS). HfO{sub 2} was deposited by atomic layer deposition (ALD) using tetrakis(ethylmethylamino)hafnium and H{sub 2}O on both oxidized and H-terminated Si and Ge surfaces. XRF quantifies the amount of deposited material during each ALD cycle and shows an inhibition period on H-terminated substrates. No inhibition period is observed on oxidized substrates. The evolution of film roughness was monitored using GISAXS. A correlation is found between the inhibition period and the onset of surface roughness.

36 MATERIALS SCIENCE↗