Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

ROCKY PLANETESIMAL FORMATION VIA FLUFFY AGGREGATES OF NANOGRAINS

Several pieces of evidence suggest that silicate grains in primitive meteorites are not interstellar grains but condensates formed in the early solar system. Moreover, the size distribution of matrix grains in chondrites implies that these condensates might be formed as nanometer-sized grains. Therefore, we propose a novel scenario for rocky planetesimal formation in which nanometer-sized silicate grains are produced by evaporation and recondensation events in early solar nebula, and rocky planetesimals are formed via aggregation of these nanograins. We reveal that silicate nanograins can grow into rocky planetesimals via direct aggregation without catastrophic fragmentation and serious radial drift, and our results provide a suitable condition for protoplanet formation in our solar system.

79 ASTRONOMY AND ASTROPHYSICS↗

Meta-Autunite Solubility as Related to Uranium Minerals in Concrete Waste Forms

Previous in situ examination of U(VI) spiked concrete indicated that uranyl-oxyhydroxide phases that were initially formed, later led to the formation of mixed uranyl-oxyhydroxide/ silicates, which subsequently transformed into uranyl-silicates, and finally altered into mixed uranyl-silicate/phosphate and uranyl-phosphate phases. We conducted solubility studies of the identified final uranyl-phosphate phase (calcium meta-autunite) in phosphate solutions ranging in concentration from 0.001 - 0.1 M as a function of pH. These studies indicated a secondary phosphate phase that formed during the solubility of meta-autunite regulated the uranium concentrations at relatively low levels under high pH conditions (>12) typically encountered in cement pore waters. The importance of uranyl-phosphate minerals in concrete waste forms has, to date, been neglected because of the minimal amount of phosphorus present in most concrete compositions. However, because concrete is a continuously reacting solid, the thermodynamic stability of uranyl minerals that form at the later stages of reaction may have a substantial impact on the long-term fate of uranium in the waste forms. This study suggests that any future investigations should consider the potential benefit of including phosphorus in concrete waste forms. (authors)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Degradation of Dome Cutting Minerals in Hanford Waste - 13100

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg. C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanism of Phase Formation in the Batch Mixtures for Slag-Bearing Glass Ceramics - 12207

Slag surrogate was produced from chemicals by heating to 900 deg. C and keeping at this temperature for 1 hr. The product obtained was intermixed with either sodium di-silicate (75 wt.% waste loading) or borax (85 wt.% slag loading). The mixtures were heat-treated within a temperature range of 25 to 1300 deg. C. The products were examined by X-ray diffraction and infrared spectroscopy. The products prepared at temperatures of up to 1000 deg. C contained both phase typical of the source slag and intermediate phases as well as phases typical of the materials melted at 1350 deg. C such as nepheline, britholite, magnetite and matrix vitreous phase. Vitrification process in batch mixtures consisting of slag surrogate and either sodium di-silicate or sodium tetraborate runs through formation of intermediate phases mainly silico-phosphates capable to incorporate Sm as trivalent actinides surrogate. Reactions in the batch mixtures are in the whole completed by ∼1000 deg. C but higher temperatures are required to homogenize the products. If in the borate-based system the mechanism is close to simple dissolution of slag constituents in the low viscous borate melt, then in the silicate-based system the mechanism was found to be much complicated and includes re-crystallization during melting with segregation of newly-formed nepheline type phase. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

X-Ray Diffraction of Slag-Based Sodium Salt Waste Forms - 15513

Cementitious materials are used to solidify and stabilize aqueous based radioactive waste containing sodium salts. The types and proportions of cementitious ingredients used to treat aqueous radioactive waste streams containing sodium salts depend on the performance objectives for the waste forms and the compositions of the waste streams. This paper documents sample preparation and x-ray diffraction results for a series of materials made with water or highly alkaline sodium salt simulated waste water and cementitious binders. The objective of this study was to: 1) generate a base line for the evolution of the waste form as a function of time and conditions, 2) design new binders based on mineralogy of the binder, 3) understand and predict anion and cation leaching behavior of contaminants of concern, and 4) predict performance of the waste forms for which phase solubility and thermodynamic data are available. Characterization of the mineralogy is also important for understanding the buffering effects that the waste form has on infiltrating water / leachates. In summary, mixtures of Type II portland cement, Grade 100 ground granulated blast furnace slag (GGBFS) and carbon burn-out (CBO) Class F Fly ash which were hydrated with water contained hydrated phase assemblages typical of those reported in the literature. The calcium silicate hydrate phase assemblage in samples hydrated with the alkaline 4.4 M sodium salt simulated waste solution was found to be a function of the (CaO + MgO) / (SiO{sub 2} + Al{sub 2}O{sub 3}) ratio of the samples characterized. No significant differences were detected in samples cured 2 months and 14 months in sealed containers at ambient indoor temperatures. Slag and a blend of slag and cement hydrated with caustic 4.4 M Na salt solution resulted in the most crystalline matrix. In addition to poorly ordered C-S-H, these samples contained fairly well ordered C-S-H I (a precursor of 14A tobermorite) and 11 A Al-substituted tobermorite. These crystalline C-S-H phases did not form or were present in only trace amounts in slag blends containing about 45 to 62 mass percent fly ash. These slag-Class F fly ash blends had a higher silica plus alumina content relative to lime and magnesia than the blends that produced C-S-H I and Al-substituted tobermorite. The calcium silicate binder in the 10:45:45 mixture of cement: slag: fly ash was made up of poorly ordered C-S-H. The sample cured for 14 months may contain a small amount of the more crystalline calcium silicate hydrate phases. Layered double hydroxides in the hydrotalcite (magnesium-aluminum carbonate hydroxide) and hydrocalumite / AFm phases (calcium aluminum hydroxide) were present in mixtures containing slag. The specific phase(s) were not identified because these phases form solid solutions and have a considerable amount of overlap in their x-ray patterns. Sodium nitrate was the only sodium salt phase identified in x-ray diffraction patterns of the samples hydrated with salt solution. Drying during x-ray diffraction sample preparation may have resulted in precipitation of the sodium nitrate or it may have been present in the samples prior to x-ray sample preparation. Sodium sulfate, aluminate, and carbonate may have been incorporated in the structures of the layered double hydroxide (AFm) type phases. These mixed metal layered double hydroxides make up an important fraction of the matrix in the slag containing blends hydrated with caustic salt solution. They are among the few oxide-based phases that exhibit substantial, permanent anion exchange capacity [Kirkpatrick, et al. 1999, Plamer, et al., 2009, and Zhang and Reardon, 2003]. They also contribute to the structural properties of cementitious matrices [Taylor, 1997]. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Xas Studies of Chemical Bonding of Nitrogen And Oxygen Atoms in Ti/ZrHf High-K Gate Dielectrics

Near edge x-ray absorption spectroscopy (NEXAS) has been used to study bonding in Ti/Zr/Hf (hereafter TM) Si oxynitrides and silicates. Comparisons between O K{sub 1} and N K{sub 1} spectra are particularly informative since O and N anti-bonding molecular orbitals (MO) display distinct features from nearest- and next-nearest-neighbor TM and Si atoms. MO TM-atom spectral features are qualitatively different in TM silicates and Si oxynitrides. NEXAS studies of TM silicates identity chemical phase separation (CPS) into TM-dioxides and SiO{sub 2} for annealing to 900{sup o}C.

36 MATERIALS SCIENCE↗

High-Pressure $γ$-CaMgSi 2 O 6 : Does Penta-Coordinated Silicon Exist in the Earth's Mantle?

We report in situ X-ray diffraction experiments with natural Fe- and Al- bearing diopside single crystals and density functional theory (DFT) calculations on diopside end-member composition indicate the existence of a new high-pressure γ-diopside polymorph with rare penta-coordinated silicon. On compression $α$-diopside transforms to the $γ$-phase at ~50 GPa, which in turn, on decompression is observed to convert to the known $β$-phase below 47 GPa. The new $γ$-diopside polymorph constitutes another recent example of penta-coordinated silicon ( V Si) in overcompressed metastable crystalline silicates, suggesting that V Si may exist in the transition zone and the uppermost lower mantle in appreciable quantities, not only in silicate glass and melts but also in crystalline phases contained in the coldest parts of subducted stagnant slabs. V Si may have significant influences on buoyancy, wave velocity anomalies, deformation mechanisms, chemical reactivity of silicate rocks, and seismicity within the slab.

58 GEOSCIENCES↗

Polyamorphic Transformations in Fe-Ni-C Liquids: Implications for Chemical Evolution of Terrestrial Planets

During the formation of the Earth's core, the segregation of metallic liquids from silicate mantle should have left behind evident geochemical imprints on both the mantle and the core. Some distinctive geochemical signatures of the mantle-derived rocks likely own their origin to the metal-silicate differentiation of the primitive Earth, setting our planet apart from undifferentiated meteorites as well as terrestrial planets or moons isotopically and compositionally. Understanding the chemical evolution of terrestrial planetary bodies requires knowledge on properties of both liquid iron alloys and silicates equilibrating under physicochemical conditions pertinent to the deep magma ocean. Here we report experimental and computational results on the pressure-induced structural evolution of iron-nickel liquids alloyed with carbon. Our X-ray diffraction experiments up to 7.3 gigapascals (GPa) demonstrate that Fe-Ni (Fe 90 Ni 10 ) liquids alloyed with 3 and 5 wt % carbon undergo a polyamorphic liquid structure transition at approximately 5 GPa. Corroborating the experimental observations, our first-principles molecular dynamic calculations reveal that the structural transitions result from the marked prevalence of three-atom face-sharing polyhedral connections in the liquids at >5 GPa. The structure and polyamorphic transitions of liquid iron-nickel-carbon alloys govern their physical and chemical properties and may thus cast fresh light on the chemical evolution of terrestrial planets and moons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Origin of the Moon Within a Terrestrial Synestia

The giant impact hypothesis remains the leading theory for lunar origin. However, current models struggle to explain the Moon’s composition and isotopic similarity with Earth. Here we present a new lunar origin model. High-energy, high-angular-momentum giant impacts can create a post-impact structure that exceeds the corotation limit, which defines the hottest thermal state and angular momentum possible for a corotating body. In a typical super-corotation-limit body, traditional definitions of mantle, atmosphere, and disk are not appropriate, and the body forms a new type of planetary structure, named a synestia. Using simulations of cooling synestias combined with dynamic, thermodynamic, and geochemical calculations, we show that satellite formation from a synestia can produce the main features of our Moon. We find that cooling drives mixing of the structure, and condensation generates moonlets that orbit within the synestia, surrounded by tens of bars of bulk silicate Earth vapor. The moonlets and growing moon are heated by the vapor until the first major element (Si) begins to vaporize and buffer the temperature. Moonlets equilibrate with bulk silicate Earth vapor at the temperature of silicate vaporization and the pressure of the structure, establishing the lunar isotopic composition and pattern of moderately volatile elements. Eventually, the cooling synestia recedes within the lunar orbit, terminating the main stage of lunar accretion. Our model shifts the paradigm for lunar origin from specifying a certain impact scenario to achieving a Moon-forming synestia. Giant impacts that produce potential Moon-forming synestias were common at the end of terrestrial planet formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Multistage Core Formation in Planetesimals Revealed by Numerical Modeling and Hf-W Chronometry of Iron Meteorites

Iron meteorites provide some of the most direct insights into the processes and timescales of core formation in planetesimals. Of these, group IVB irons stand out by having one of the youngest 182 Hf- 182 W model ages for metal segregation (2.9 ± 0.6 Ma after solar system formation), as well as the lowest bulk sulfur content and hence highest liquidus temperature. Here in this paper, using a new model for the internal evolution of the IVB parent body, we show that a single stage of metal-silicate separation cannot account for the complete melting of pure Fe metal at the relatively late time given by the Hf-W model age. Instead, a complex metal-silicate separation scenario is required that includes migration of partial silicate melts, formation of a shallow magma ocean, and core formation in two distinct stages of metal segregation. In the first stage, a protocore formed at ≈1.5 Ma via settling of metal particles in a mantle magma ocean, followed by metal segregation from a shallow magma ocean at ≈5.4 Ma. As these stages of metal segregation occurred at different times, the two metal fractions had different 182 W compositions. Consequently, the final 182W composition of the IVB core does not correspond to a single differentiation event, but represents the average composition of early- and late-segregated core fractions. Our best fit model indicates an ≈100 km radius for the IVB parent body and provides an accretion age of ≈0.1–0.5 Ma after solar system formation. The computed solidification time is, furthermore, consistent with the Re-Os age for crystallization of the IVB core.

58 GEOSCIENCES↗

Charge fingerprint in relation to mineralogical composition of Quaternary volcanic ash along a climatic gradient on Java Island, Indonesia

We studied the relationship between the mineralogical composition and surface charge properties of representative Quaternary volcanic ash soils, classified as Andosols, along an East-West sequence on Java Island in Indonesia. Most of the studied soils have a limited ability to retain cations under their forest or grass vegetation. The surface charge properties of these soils are mainly controlled by the relative amounts of nanocrystalline minerals, mainly allophane and to a lesser extent ferrihydrite, in addition to organic matter (especially Al- and Fe-humus complexes), crystalline Fe oxides, gibbsite, and layer silicates (e.g., halloysite, smectite, kaolinite). Based on the composition of their clay fraction, the studied soils can be grouped in two categories: (i) allophane-poor Andosols of East Java, which contain a considerable amount of either halloysite or a mixture of 2:1 and 1:1 layer silicates; and (ii) allophane-rich Andosols dominated either by kaolinitic clays, gibbsitic material or a mixture of 1:1 and 2:1 layer silicate clays, which are more prominent in West and also occur in Central Java. Differences between both groups are attributed mainly to more pronounced seasonality in East Java, with variations in parent ash composition, becoming more acidic from east to west, as subordinate factor. The more severely leaching environment in West Java results in a higher degree of desilication , which led to a higher point of zero net charge (PZNC) and pHo in the allophane-rich soils. The soils belonging to this group exhibit extreme variable charge characteristics, and a net ‘positive’ variable surface charge at soil pH.

Utami, S. R.↗

Hydration of a low-alkali CEM III/B-SiO{sub 2} cement (LAC)

The hydration of a low-alkali cement based on CEM III/B blended with 10 wt.% of nanosilica has been studied. The nanosilica reacted within the first days and 90% of the slag reacted within 3.5 years. C-S-H (Ca/Si {approx} 1.2, Al/Si {approx} 0.12), calcite, hydrotalcite, ettringite and possibly straetlingite were the main hydrates. The pore water composition revealed ten times lower alkali concentrations than in Portland cements. Reducing conditions (HS{sup -}) and a pH value of 12.2 were observed. Between 1 month and 3.5 years of hydration more hydrates were formed due to the ongoing slag reaction but no significant differences in the composition of the pore solution or solid phase assemblage were observed. On the basis of thermodynamic calculations it is predicted that siliceous hydrogarnet could form in the long-term and, in the presence of siliceous hydrogarnet, also thaumasite. Nevertheless, even after 3.5 year hydration, neither siliceous hydrogarnet nor thaumasite have been observed.

36 MATERIALS SCIENCE↗

Sources of Li isotope bias during SIMS analysis of standard glasses

The 7 Li/ 6 Li ratios in fourteen USGS, MPI-DING, and NIST glass reference materials (RMs) were analyzed by LG-SIMS to assess compositional matrix effects, evaluate RM δ 7 Li homogeneity, and calculate the useful yield of lithium in silicate glasses. The analyzed RMs cover a range of SiO 2 contents from 45.5 to 75.6% (komatiite to rhyolite), the largest compositional range yet evaluated for δ 7 Li matrix effects. We observe a matrix-induced bias (matrix effect) of up to 18‰ over the studied range that linearly correlates with SiO 2 content, demonstrating that SiO 2 content is a critical factor that must be considered when using silicate glasses to standardize for silicate samples of unknown δ 7 Li composition. All RMs were found to be sufficiently reproducible to aid in standardization of variable SiO 2 contents and appear isotopically homogeneous at the precision of our measurements. Lithium ionizes very efficiently in these RMs, with measurable yields >5% in all fused-rock RMs and >15% in low SiO 2 fused-rock RMs measured at high beam intensities. Finally, fused-rock RMs ionize lithium 2-3x more efficiently than synthetic glass RMs, which may be related to differences in major oxide chemistry and the reduced nature of the synthetic glasses relative to their fused counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Validating the rhenium proxy for rock organic carbon oxidation using weathering profiles

Chemical weathering over geological timescales acts as a source or sink of atmospheric carbon dioxide (CO 2 ), while influencing long-term redox cycling and atmospheric oxygen (O 2 ) at Earth's surface. There is a growing recognition that the oxidative weathering of rock organic carbon (OC petro ) can release more CO 2 than is locally drawn down by silicate weathering, and may vary due to changes in erosion and climate. The element rhenium (Re) has emerged as a proxy to track the oxidative weathering of OC petro , yet uncertainties in its application remain namely that we lack a systematic assessment of the comparative mobility of Re and OC petro during sedimentary rock weathering. Here we measure Re and OC petro loss across gradients in rock weathering at 9 global sites, spanning a range of initial OC petro values from ~0.2 % to >10 %. We use titanium to account for volume changes during weathering and assess Re and OC petro loss alongside major elements that reflect silicate (Na, Mg), carbonate (Ca, Mg) and sulfide (S) weathering. Across the dataset, Re loss is correlated with OC petro loss but not with loss of any other major element. Further, across the weathering profiles, the average molar ratio of OC petro to Re loss was 0.84 ± 0.15, with 8 out of 9 sites having a ratio >0.74. At one site (Marcellus Shale), the average ratio was lower at 0.58 ± 0.11. The excess loss of Re matches expectations that, typically, between ~0 and 20 % of the Re liberated by sedimentary rock weathering derives from silicate or sulfide phases, while some OC petro may be physically or chemically protected from weathering. Overall, our measurements provide validation for the Re proxy of OC petro oxidation and allow future work to further improve our knowledge of regional and global-scale rates of this important source of CO 2 in the geochemical carbon cycle.

58 GEOSCIENCES↗

Tungsten and molybdenum isotopic evidence for an impact origin of pallasites

The origin of pallasites—stony-iron meteorites mainly composed of olivine and Fe-Ni metal—is debated and proposed formation scenarios broadly range from models that explain pallasite formation by internal processes in the mantle of a differentiated planetesimal to those that involve impact–induced mixing of core and mantle materials. Here, the origin of pallasites is examined by studying the nebular source regions of their precursor material using Mo isotopes and their history of metal-silicate segregation using Hf-W chronometry. We report new Mo and W isotopic data for a large suite of pallasite metal samples, alongside Pt isotope data to quantify superimposed cosmic ray exposure effects. Most main-group pallasites exhibit uniform pre-exposure 182 W and Mo isotopic compositions that bear an excellent similarity to those of IIIAB iron meteorites. Four main-group pallasites and the IIIAB iron Thunda have more radiogenic pre-exposure 182 W compositions, but display the same Mo isotopic composition as other main-group pallasites and IIIAB irons. This strong chronological and genetic link strongly suggests that main-group pallasite metal originated in the IIIAB parent body core. This, combined with prior Pd-Ag chronometric evidence for an early collisional disruption of the IIIAB parent body, implies that main-group pallasites formed by impact–induced mixing of metal and silicates rather than by an internal process on the IIIAB parent body. This mixing led to elevated 182 W compositions in some pallasites, which are best accounted for by partial re-equilibration of IIIAB metal with radiogenic 182 W from the colliding body. Altogether, our results support models that explain main-group pallasite formation by injection of pallasite metal into the mantle of another differentiated body, implying that pallasite silicates did not primarily derive from the IIIAB mantle, but instead from that of the colliding body.

58 GEOSCIENCES↗

Long-Term Dynamics of Uranium Reduction/Reoxidation under Low Sulfate Conditions

The biological reduction and precipitation of uranium has shown potential to prevent uranium migration from contaminated areas. Although previous research has shown that uranium bioremediation is maximized during iron reducing conditions, little research has been performed to understand how long iron/uranium reducing conditions can be maintained. Similarly, questions remain about the stability of the bioreduced uranium and that of the uranium-reducing microbial population after iron/uranium biostimulation conditions are terminated and an oxidant (i.e. oxygen) is introduced into the previously reduced zone. To gain further insights into these processes, columns, packed with sediment containing iron as Fe-oxides (mainly Al-goethite) and silicate Fe (Fe-containing clays), were operated in the laboratory under field-relevant flow conditions to measure the long-term (> 200 d) removal efficiency of uranium from a simulated groundwater during biostimulation with acetate under low sulfate conditions. The biostimulation experiments were then followed by reoxidation of the reduced sediments with oxygen. During biostimulation, Fe(III) reduction occurred simultaneously with U(VI) reduction. Both Fe-oxides and silicate Fe(III) were partly reduced, and silicate Fe(III) reduction was detected only during the first half of the biostimulation phase while Fe-oxide reduction occurred throughout the whole biostimulation period. Mössbauer measurements indicated that the biogenic Fe(II) precipitate resulting from Fe-oxide reduction was neither siderite nor FeS0.09 (mackinawite). U(VI) reduction efficiency increased throughout the bioreduction period, while the Fe(III) reduction gradually decreased with time. Effluent Fe(II) concentrations decreased linearly by 30% over the final 100 days of biostimulation, indicating that bioreducible Fe(III) in the sediment was not exhausted at the termination of the experiment. Even though Fe(III) reduction did not change substantially with time, microorganisms not typically associated with Fe(III) and U(VI) reduction (including methanogens) became a significant fraction of the total microbial population during long-term biostimulation, meaning that most acetate was utilized for other biological processes than Fe(III) and U(VI) reduction. Selected columns were reoxidized after 209 days by discontinuing acetate addition and purging the influent media with a gas containing 20% oxygen. Uranium reoxidation occurred rapidly with 61% of the precipitated uranium resolubilized and transported out of the column after 21 days and virtually all of the uranium being removed by day 122. During the first 21 days of reoxidation, the Fe(III) and U(VI) reducing microbial population remained at pre-oxidation levels (even though the methanogen population decreased by 99%) indicating that short-term disruptions in biostimulation (equipment failure, etc.) would not negatively affect the uranium reducing microbial population.

54 ENVIRONMENTAL SCIENCES↗

Hf-W chronology of CR chondrites: Implications for the timescales of chondrule formation and the distribution of 26 Al in the solar nebula

The CR chondrites are distinct from most other chondrites in having younger chondrule 26 Al- 26 Mg ages, but the significance of these ages and whether they reflect true formation times or a heterogeneous distribution of 26 Al are not well understood. To better determine the timescales of CR chondrule formation and CR chondrite parent body accretion, we obtained Hf-W isotopic data for metal, silicate, and chondrule separates from four CR chondrites. We also obtained Mo isotopic data for the same samples, to assess potential genetic links among the components of CR chondrites, and between these components and bulk chondrites. The isotopic data demonstrate that metal and silicate in CR chondrites exhibit distinct nucleosynthetic W and Mo isotope anomalies, caused by the heterogeneous distribution of a single presolar s-process carrier. These isotope signatures are akin to the complementary anomalies found previously for chondrules and matrix in CV chondrites and indicate that the major components of CR chondrites are genetically linked and formed from a common reservoir of solar nebula dust. The obtained Hf-W age of 3.6±0.6 million years (Ma) after the formation of Ca-Al-rich inclusions (CAIs) most likely dates metal-silicate separation during chondrule formation and is consistent with Al-Mg and Pb-Pb ages for CR chondrules, indicating that CR chondrules formed ~1–2 Ma later than chondrules from most other chondrite groups. Moreover, chemical, isotopic, and chronological data imply close temporal link between chondrule formation and chondrite accretion, making the CR chondrite parent body one of the youngest meteorite parent bodies. Such a late accretion at ~3.6 Ma after CAIs is consistent with isotopic composition of CR chondrites (e.g., 15 N/ 14 N) that is indicative of a formation at a larger heliocentric distance, probably beyond the orbit of Jupiter. As such, the accretion age of the CR parent body provides the earliest possible time at which Jupiter could have migrated inwards, leading to scattering of carbonaceous meteorite parent bodies into the inner solar system. Finally, the concordant Hf-W and Al- Mg ages for CR chondrules, combined with Hf-W and Al-Mg data for bulk CAIs, angrites, and CV chondrules, provide strong evidence for a disk-wide, homogeneous distribution of 26 Al in the early solar system.

58 GEOSCIENCES↗

Siderophile element constraints on the thermal history of the H chondrite parent body

The abundances of highly siderophile elements (HSE: Re, Os, Ir, Ru, Pt, Pd), as well as 187 Re- 187 Os and 182 Hf- 182 W isotopic systematics were determined for separated metal, slightly magnetic, and nonmagnetic fractions from seven H4 to H6 ordinary chondrites. The HSE are too abundant in nonmagnetic fractions to reflect metal-silicate equilibration. The disequilibrium was likely a primary feature, as 187 Re- 187 Os data indicate only minor open-system behavior of the HSE in the slightly and non-magnetic fractions. 182 Hf- 182 W data for slightly magnetic and nonmagnetic fractions define precise isochrons for most meteorites that range from 5.2 ± 1.6 Ma to 15.2 ± 1.0 Ma after calcium aluminum inclusion (CAI) formation. By contrast, 182W model ages for the metal fractions are typically 2–5 Ma older than the slope-derived isochron ages for their respective, slightly magnetic and nonmagnetic fractions, with model ages ranging from 1.4 ± 0.8 Ma to 12.6 ± 0.9 Ma after CAI formation. This indicates that the W present in the silicates and oxides was not fully equilibrated with the metal when diffusive transport among components ceased, consistent with the HSE data. Further, the W isotopic compositions of size-sorted metal fractions from some of the H chondrites also differ, indicating disequilibrium among some metal grains. The chemical/isotopic disequilibrium of siderophile elements among H chondrite components is likely the result of inefficient diffusion of siderophile elements from silicates and oxides to some metal and/or localized equilibration as H chondrites cooled towards their respective Hf-W closure temperatures. The tendency of 182 Hf- 182 W isochron ages to young from H5 to H6 chondrites may indicate derivation of these meteorites from a slowly cooled, undisturbed, concentrically-zoned parent body, consistent with models that have been commonly invoked for H chondrites. Overlap of isochron ages for H4 and H5 chondrites, by contrast, appear to be more consistent with shallow impact disruption models. The W isotopic composition of metal from one CR chondrite was examined to compare with H chondrite metals. In contrast to the H chondrites, the CR chondrite metal is characterized by an enrichment in 183 W that is consistent with nucleosynthetic s-process depletion. Once corrected for the correlative nucleosynthetic effect on 182 W, the 182 W model age for this meteorite of 7.0 ± 3.6 Ma is within the range of model ages of most metal fractions from H chondrites. Finally, the metal is therefore too young to be a direct nebular condensate, as proposed by some prior studies.

58 GEOSCIENCES↗