Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Development of Advanced Geopolymerized Brine Sludge Based Composites

For the first time in the world, geopolymerized brine sludge has been developed as it leads to the formation of enhanced geopolymeric gel which not only helps in further improving the interfacial binding of the conventional geopolymeric matrix using jute and glass fiber as reinforcement but also helps in making the toxic elements non-leachable from the geopolymerized brine sludge due to enhanced geopolymerization reaction taking place in the brine sludge incorporated advance matrix. The advanced geopolymerized matrix is capable of providing improved interfacial binding due to formation of additional C–S–H gel along with Na–S–H gel of conventional geopolymeric matrix in the geopolymeric brine sludge system. The simultaneous presence of desired components and constituents in the single matrix of geo polymeric brine sludge lead to the enhanced homogeneity among the reinforcement and matrix. The geo polymerized brine sludge was further used for making advance composites (AC) using closed mold fabrication system, with hand layup manual technique (a) without any fiber reinforcement, (b) with jute fiber reinforcement (c) and with glass fiber reinforcement of dimensions 12 in. × 12 in. × 6 in. The morphologies of all the three developed AC were examined using SEM and were also tested for their various mechanical properties like tensile strength, flexural strength, impact strength, abrasion resistance. The results indicate that fiber reinforced based AC shows the increase in the mechanical properties as compare to non-fiber reinforced AC. Further, the glass fiber reinforced AC showed better results than jute fiber reinforced AC. This remarkable enhancement is due to the unique properties of fiber in tolerating greater bending and fracture forces than the non reinforced matrix based materials. Graphical Abstract: .

36 MATERIALS SCIENCE↗

Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly Gracilaria corticata Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.

36 MATERIALS SCIENCE↗

Polylactic Acid (PLA) Biocomposites Filled with Waste Leather Buff (WLB)

A large amount of leather waste is generated from tanning industries and most of which are disposed of landfill or discharged into the natural water bodies without any treatment, causing environmental problems. The aim of this study is to develop eco-biocomposites using waste leather buff (WLB) as filler in Polylactic acid (PLA) matrix to reduce the environmental issues and provide sustainable solution. WLB/PLA composites were prepared by twins-screw micro extruder varying the WLB content from 2% to 30 wt%. These composite were extensively characterise by several techniques. Tensile properties of the composites showed addition of WLB resulted in improvement of tensile property of composite and reduction in percentage crystallinity of PLA matrix observed with increase in WLB content. The effect of WLB on properties of interfacial adhesion and dispersion in WLB/PLA composites were studied by SEM. Wettability of composites was tested by contact angle and water absorption studies. WLB/PLA composite showed increase in water absorption with WLB loading. These WLB/PLA composite could be used to develop low cost eco-friendly product material.

36 MATERIALS SCIENCE↗

Thorium(IV) Recovery from Water and Sea Water Using Surface Modified Nanocellulose/Nanobentonite Composite: Process Design

Thorium(Th) contamination in the ground water an emerging environmental issue and Th recovery from sea water and nuclear wastewater is of high significance, as it is a major player in the energy sector. For the adsorption and recovery of Th, polymer grafted bio materials are reported as most efficient materials. P(IA/MAA)-g-NC/NB was prepared and all the steps in the synthetic routes were monitored using FTIR, SEM–EDS, and XRD, TG. Efficiency in removal of Th(IV) by P(IA/MAA)-g-NC/NB was tested by batch adsorption technique. The pH dependent Th(IV) adsorption process, was optimized at 4.5 and adsorption equilibrium was achieved within 120 min. Experimental kinetic data correlates well with pseudo-second-order equation, indicates adsorption was chemical process via ion exchange followed by complexation reaction, also could explain the film diffusion process of adsorption. Sips isotherm proved to best fit for the adsorption of Th(IV) onto P(IA/MAA)-g-NC/NB with maximum adsorption capacity of 95.19 mg/g. Thermodynamic studies revealed the endothermic nature, feasibility and spontaneity of the adsorption process. ΔHx and ΔSx were decreased to a small extent from −5.567 to −3.439 kJ/mol and increased from 11.18 to 18.39 J/mol, respectively, with increase in surface loading from 50 to 70 mg/g, indicating that the surface of the onto P(IA/MAA)-g-NC/NB is having energetically heterogeneous surface and there may be some lateral interactions between the adsorbed Th(IV) ions Repeated adsorption–desorption study over six cycles, adsorption percentage decreases from 99.0 to 94.6 %, proved the efficiency of P(IA/MAA)-g-NC/NB as an effective adsorbent for the removal and recovery of Th(IV) from aqueous solutions. Complete removal of Th(IV) ions from seawater containing 10 mg/L with a dose of 0.25 g/L P(IA/MAA)-g-NC/NB achieved. Batch adsorption system as double stage reactor designed from the adsorption isotherm data of Th(IV) by constructing operational lines. From these could be concluded that P(IA/MAA)-g-NC/NB is a promising candidate for the effective removal and removal of Th(IV) from industrial effluents phase and sea water. The maximum adsorption capacity Qs for Ceralite IRC-50 calculated which was found to be 179.67 mg/g which are considerably lower than those for P(IA/MAA)-g-NC/NB.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Leather Wastes from Chrome Tanning and its Effect as Filler on the Rheometric Properties of Natural Rubber Compounds

Chrome tanning generates large amounts of leather wastes (LW) which have become a considerable environmental issue. In this work, particulate LW with and without urea treatment were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) under inert and oxidative atmospheres, and elemental analysis. Then treated LW (TLW) were incorporated in natural rubber compounds, seeking to find another way of disposal for this type of residue. The effect of TLW on rheometric properties of rubber composites during vulcanization was evaluated, including parameters related to leather particles dispersion in the matrix. It was found that TLW contained chromium and sulfur remaining from tanning, which could affect the properties of rubber compounds. During TGA analysis, oxidation of chromium into LW was increased as an effect of urea treatment. It was observed that TLW improved rubber processability during open two-roll mill mixing process. Rheometric characteristics allowed to identify a decreased TLW particle dispersion into the compound with the increase of its content in the composites. Stiffness of vulcanized composites and the kinetic of the vulcanization varied with TLW content, as an effect of the interaction of TLW with the rubber compound. Particulate leather wastes morphology could facilitate its mechanical interlocking with the polymeric matrix. The development of these type of composites will enable another profitable use for this type of waste.

36 MATERIALS SCIENCE↗

Enhancing the Melt Strength of Poly(Lactic Acid) via Micro-Crosslinking and Blending with Poly(Butylene Adipate-co-Butylene Terephthalate)for the Preparation of Foams

The melt strength of poly(lactic acid) (PLA) is an important factor in preparing foams and blowing films. Aiming to endow PLA with a suitable melt strength via a slight crosslink, a superficial micro-crosslinking method was introduced in which the PLA feed was mixed with benzoyl peroxide (BPO) and crosslinked in a 100 °C oven for 1 h. Additionally, poly(butyleneadipate-co-terephthalate) (PBAT) was blended with the crosslinked PLA (C-PLA) to further improve melt strength and viscosity. The blend foams were prepared using a single-screw extruder and azodicarbonamide as a foaming agent. The properties were characterized by gel fraction, melt flow rate (MFR), rheometry, DSC and SEM. The rheological results showed that the complex viscosity and storage modulus of C-PLA and C-PLA/PBAT blends increased, attributed to the micro-crosslinking and addition of PBAT and indicating an improvement in melt strength. Furthermore, the crystallization of modified PLA was also enhanced. Compared with pure PLA foams, the C-PLA/PBAT blend foams showed larger cells with more uniform shapes and homogenous distribution. This approach to improve the melt strength of polymers with micro-crosslinking and blending with PBAT represents an attractive method for preparing foams with regular cells.

36 MATERIALS SCIENCE↗

Biosynthesis, Microstructural Characterisations and Investigation of In-Vitro Mutagenic and Eco-Toxicological Response of a Novel Microbial Exopolysaccharide Based Biopolymer

A modified microbial polysaccharide based biopolymer has been investigated as a potential candidate towards development of sustainable biomaterials and bioplastics. An in-depth study was carried out to biosynthesize, characterize and assess any possible mutagenic potential and ecotoxicity of the microbial polysaccharide biopolymer. Microstructural investigations using confocal microscopy, Fourier transform (FT)-Raman depth profile mapping and scanning electron microscopy (SEM) of the biosynthetically modified polysaccharide revealed internal structural perturbations, as well as occlusion of granular pores by extraneous materials. The Raman 3D mapping depth profile along with time-of-flight (MALDI-TOF) mass spectrometry also indicated important structural and surface modifications, which could be correlated to the production of microbial exopolysaccharides and secondary metabolites. The study then looked into any possible genetic mutation and ecological risks associated with the biosynthetically modified polysaccharide through the investigation of genotoxicity and ecotoxicity. The genotoxicity study was carried out through bacterial reverse gene mutation (Ames) test by using two different strains (TA98 and TA100) of bacteria. The results did not indicate any mutagenic effect against either of the strains used for the biopolymer samples and was found to be genotoxically safe. Ecotoxicity tests, carried out using bioluminescent bacteria Vibrio fisheri further indicated no ecotoxicity within the given experimental conditions. The study measured the half maximal effective concentration (EC50) to cause a 50% decrease in the light output of the bacteria, a measure of ecotoxicological response of the biopolymer. Overall, results from this study indicated that the novel biopolymer was genotoxically and ecotoxically safe, which offers immense potential for future use of this biopolymer.

36 MATERIALS SCIENCE↗

Development of Anti-bacterial PVA/Starch Based Hydrogel Membrane for Wound Dressing

Wound infection is the primary challenge in the wound care management. To facilitate patients, the health care sector is trying to use the modern technology in the field of wound management. Various cellular processes and biological environments are intertwined in the process of wound repair. The compulsion for the modern dressing is not only to cover the wound but also to facilitate the healing rate of wound. In this research, the hydrogel membranes were prepared by crosslinking poly vinyl alcohol (PVA) with starch by using glutaraldehyde. Turmeric was added as an anti-bacterial agent. 0.5 g of turmeric showed the highest anti-bacterial activity among different turmeric contents used. For physical and mechanical characterization, the hydrogel membrane without turmeric (neat hydrogel) and 0.5 g were selected. FTIR of both hydrogel membranes confirmed the presence of free hydroxyl groups. Moreover, hydrogel membrane containing turmeric resulted stronger hydrogen bond interaction. Mechanical analysis of hydrogel membrane revealed sufficient strength to be used as wound dressing. The SEM images evolved that both hydrogel membranes were dense in nature. The swelling behavior values were greater than 100% for both hydrogel membranes. The water vapor transmission rate for 0.5 g turmeric hydrogel membrane was 52.85 g/m{sup 2}h.

36 MATERIALS SCIENCE↗

Contribution of Catalytic Transesterification Reactions to the Compatibilization of Poly(lactic acid)/Polycarbonate Blends: Thermal, Morphological and Viscoelastic Characterization

Samarium acetylacetonate (Sm-Acac) was added to catalyze interchange reactions between poly(lactic acid) (PLA) and polycarbonate (PC) in order to promote compatibilization and enhance the performances of the PLA/PC blend. The effects of the composition and catalyzed transesterification reactions were investigated using differential scanning calorimetry (DSC), thermogravimetry (TG), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). DMTA and DSC analysis revealed the immiscibility of the uncatalyzed PLA/PC blends for the studied compositions because the glass transition temperatures of PC and PLA were unchanged after blending. In the PLA glassy region, PLA/PC blends exhibited lower storage moduli which increased upon heating due to the cold crystallization process. During melt mixing with Sm-Acac catalyst, PLA/PC blends were submitted to two competing processes. In one hand, Sm-Acac acted as a plasticizer and contributed in decreasing significantly the glass transition, crystallization and melting temperatures of PLA phase. In the other hand, Sm-Acac proved its efficiency in catalyzing the transesterification reactions that were evidenced by the decrease of the PLA aptitude to crystallization due to the hindering effect of the PC units inserted into the PLA chains. PLA/PC blends melt mixed with 0.25% of Sm-Acac showed a significant strengthening effect, corresponding to an increase in the storage modulus in the temperature range comprised between 70 and 90 °C. This indicated the formation of a copolymer at the interface and the promotion of adhesion as it is confirmed from the decrease in the height of the PLA Tan δ peak. At 0.5% of Sm-Acac, (90/10) PLA/PC blend revealed a new peak assigned to the glass transition of the PLA-PC copolymer, whereas the (50/50) PLA/PC blend was converted into a new random copolymer. TG analysis proved the presence of a copolymer structure presenting an intermediate thermal stability in both the catalyzed and uncatalyzed blends.

36 MATERIALS SCIENCE↗

Influence of Plasticizers on Mechanical and Thermal Properties of Methyl Cellulose-Based Edible Films

Methyl cellulose (MC) films plasticized with malic acid (MA) and sorbitol (SOR) were prepared by casting solution and the influence of plasticizers at different concentrations (10, 20 and 30/100 g dry MC) on the mechanical and thermal properties were investigated. A decrease in tensile strength of the plasticized films was observed with increase in quantity of plasticizer. On the contrary, percentage elongation at break increased with an increase in plasticizer concentration that was more pronounced in SOR plasticized films. Films prepared with SOR exhibited higher water affinity and resulted in greater moisture absorption. Thermal stability was reduced with the addition of plasticizers and the SOR film samples were more thermally resistant as compared to MA-added films. FTIR analysis demonstrated the hydrogen bonding interactions between the functional groups of MC and plasticizers. The SEM micrographs of all the films showed a smooth and homogeneous surface morphology. The X-ray diffraction analysis suggested a semi-crystalline nature of the plasticized films.

36 MATERIALS SCIENCE↗

A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.

36 MATERIALS SCIENCE↗

Adsorption Efficiency of Polyaspartate-Montmorillonite Composite Towards the Removal of Pb(II) and Cd(II) from Aqueous Solution

The selective modification of sodium montmorillonite (Na{sup +}-Mt) surface with polyionene followed by poly (succinimde-co-aspartate) has been considered. Na{sup +}-Mt was allowed to react with well characterized polyionene in two fold excess. The resulting polyionene/Mt (IC) was further modified with poly (succinimide-co-aspartate) through an ion exchange process. The obtained polyaspartate/Mt (IPS) composite was characterized by elemental analysis, X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and BET surface analyzer. The adsorption efficiency of IPS composite was investigated for the removal of Pb(II) and Cd(II) from aqueous solution under different experimental conditions including initial metal ions concentration, temperature and single and binary mixture systems of metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. Langmuir model reveals that the monolayer adsorption capacity of IPS was 92.59 and 67.57 mg/g for Pb(II) and Cd(II), respectively. The modification of parent Na{sup +}-Mt enhanced their adsorption capacity by about 87.91 and 29.84% for Pb(II) and Cd(II), respectively, due to inclusion of extra active sites of polyaspartate. The mean sorption energy, E calculated from Dubinin–Radushkevich isotherm were 2.75 and 1.98 kJ/mol for the adsorption of Pb(II) and Cd(II), respectively, indicating physical adsorption process. Also, The thermodynamic parameters were calculated and indicated that the adsorption was spontaneous and exothermic process. The mechanism of cation exchange and complexation of metal ions was suggested. IPS composite has a considerable potential for the removal of heavy metal ions from aqueous solution and wastewater stream.

36 MATERIALS SCIENCE↗

Fabrication of Biodegradable Superabsorbent Using RSM Design for Controlled Release of KNO{sub 3}

Present study envisaged the sequential experimental design approach for the development of biodegradable Gelatin-Tapoica/polyacrylamide superabsorbent. Percentage water uptake efficacy of candidate sample was optimized using Response Surface Methodology (RSM) design under microwave irradiation. Different process variables such as potassium persulphate and ammonium persulphate (KPS:APS) ratio, pH, reaction time concentration of acrylamide and N,N-methylene-bis-acrylamide (MBA) were investigated as a function of percentage swelling using sequential experimental design. Maximum liquid efficacy of 1550% was obtained at KPS:APS = 1.0:0.5; acrylamide = 7.67 × 10{sup −1} mol L{sup −1}; MBA = 1.76 × 10{sup −2} mol L{sup −1}; pH 10 and time = 110 s. The 3D crosslinked network formed was characterized using Fourier Transformation Infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning Electron Microscopic (SEM) techniques and thermal stability was ensured by Thermal gravimetric Analysis/Differential Thermal Analysis/Differential Thermal Gravimetric (TGA/DTA/DTG) studies. Superabsorbent synthesized could increase the moisture content in different type of soils and was found to enhance the water-holding capability of the soil upto 60 days in clayey, 40 days in sandy and 51 days in mixture of two soils under controlled conditions. Further, candidate polymer was investigated for the in-vitro controlled release of the KNO{sub 3} with diffusion exponent ‘n’ was found to be 0.4326 indicating Fickian type diffusion. Also, initial diffusion coefficient (D{sub I} = 3.49 × 10{sup −5} m{sup 2} h{sup −1}) was found to be greater than the lateral diffusion coefficient (D{sub L} = 3.76 × 10{sup −6} m{sup 2} h{sup −1}) indicated rapid release of KNO{sub 3} during initial hours with slow release afterwards. The ecofriendly nature of the synthesized polymer was also tested by conducting biodegradation studies and it was found to degrade upto 94% and 88.1% within 70 days with degradation rate of 1.34 and 1.26% per day using composting method and vermicomposting method respectively. So, the synthesized candidate polymer was found to be boon for agriculture-horticulture sector with wide applicability.

36 MATERIALS SCIENCE↗

Green Composite Based on PHB and Montmorillonite for KNO{sub 3} and NPK Delivery System

Controlled release fertilizer (CRF) as a safe system for reducing environmental pollution still remains as demand for the agribusiness. Natural and biodegradable polymer materials have been proposed as a prominent and sustainable controlled delivery system. Composite based on polyhydroxybutyrate (PHB), starch, glycerol and montmorillonite (PHBSGMMt) has been proposed as a carrier for controlled release fertilizers, such as KNO{sub 3} and NPK. PHBSGMMt with 10 wt% of KNO{sub 3} or NPK processed by melting at 162 °C, 60 rpm during 10 min in a mixer chamber of torque rheometer. Composites were characterized according to its structure by FTIR and XRD, in thermal behavior by TGA and DSC, and morphology by SEM. Fertilizers release in water was determined by ionic conductivity. Clay, KNO{sub 3}, and NPK increased the PHB/starch compatibility and homogeneity, resulting in a well-interfaced material obtained for PHBSGMMTNPK. MMtKNO{sub 3} was mainly on PHB phase and MMtNPK on the compatible polymeric phase. These behaviors explain the faster release of KNO{sub 3} in water medium since the KNO{sub 3} has high solubility and the phase separation creates fissures that turn in water pathway. Kinetic parameters classified the material as a non-Fickian diffusion or anomalous transport mechanism.

36 MATERIALS SCIENCE↗

Preparation and Characterization of Bionanocomposites Based on Benzylated Wheat Straw and Nanoclay

The main goal of this study was to chemically modify the structure of thermoset-like wheat straw using benzylation reaction, change it to thermoplastic material and clarify the precise role of nanoclay on properties of nanocomposites. Thermoplastic benzylated wheat straw (BWS) nanocomposites prepared via solvent casting. The Fourier transform infrared (FTIR) and Nuclear Magnetic Resonance (NMR) spectra confirmed the substitution of H groups with benzyl groups. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) tests demonstrated good dispersion and intercalation of nanoclay. Thermal studies confirmed the thermoplasticity of the samples, while the addition of up to 5% nanoclay showed the increase in crystallization, T{sub g} and T{sub m}. Nanoclay also can retard thermal decomposition process. The presence of nanoclay improved all mechanical properties except the elongation at break. Nanocomposite with 5% nanoclay showed minimum water absorption and highest hydrophobicity comparing to other samples. This novel bionanocomposite could be a suitable alternative for replacing oil-based plastics in biomembranes and bioseparation processes. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Selective Lead(II) Adsorption and Flocculation Characteristics of the Grafted Sodium Alginate: A Comparative Study

Synthesis of sodium alginate-g-poly(acrylamide-co-N-methylacrylamide) [S-III], sodium alginate-g-poly(N-methylacrylamide-co-N,N-dimethylacrylamide) [S-II], sodium alginate-g-poly(acrylamide-co-N,N-dimethylacrylamide) [S-I]. Sodium alginate-g-poly(N,N-dimethylacrylamide) [SAG-g-PDMA] and sodium alginate-g-poly(acrylamide) [SAG-g-PAM] were prepared by solution polymerization technique using potassium peroxydisulfate as the initiator at 70 °C in water medium. The graft copolymers were characterized by FTIR and NMR ({sup 1}H and {sup 13}C) spectroscopy, SEM and XRD studies. All the five graft copolymers were used to remove Pb(II) ions from the aqueous solution and also in flocculation studies of kaolin clay (1.0 wt%), silica (1.0 wt%) and iron ore slime (0.25 wt%) suspensions. A comparative studies of all the five graft copolymers were also made in both the two cases. The Pb(II) ion removal capacity of all the graft copolymers follows the order S-III > SAG-g-PAM > S-II > SAG-g-PDMA > S-I. But the flocculation performance of the graft copolymers follows the order S-II > S-I > S-III > SAG-g-PDMA > SAG-g-PAM. S-III was also used for the competitive metal ion removal with Hg(II), Cd(II), Cu(II) and Zn(II). Pb(II) adsorption of S-III (the best Pb(II) ion adsorber) follows pseudo second order rate equation and Langmuir adsorption isotherm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Organo-Modified Clay Addition and Temperature on the Water Vapor Barrier Properties of Polyhydroxy Butyrate Homo and Copolymer Nanocomposite Films for Packaging Applications

Polymer nanocomposites, based on bacterial biodegradable thermoplastic polyester, poly(hydroxy-butyrate) (PHB), poly(hydroxyl-butyrate-co-hydroxy-valerate) (PHBHV), and commercial organo-modified montmorillonite (OMMT-Cloisite 10A) were prepared by solution casting method. This work aims to investigate the effect of Cloisite 10A type clay addition on the water vapour permeability properties of PHB/OMMT, and PHBHV/OMMT nanobiocomposite films. Temperature dependence of water vapor permeabilities of the films were also evaluated at various temperatures, and semi empirical permeability models were used to predict the permeability of polymer systems as a function of clay concentration and aspect ratio of nanoplates. Moreover, thermal, optical, and mechanical properties of the composites were examined by using varieties of techniques including differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), scanning electron microscope (SEM), and thin-film X-ray diffractometer (TF-XRD) respectively. Test results indicated that addition of highly intergallery swollen Cloisite 10A to the PHB/PHBHV, reduced the water vapor permeability up to 41 and 25% compared to native PHB and PHBHV films, respectively. Regarding the all mechanical properties measured, the maximum improvement was achieved for 3 wt% clay loaded samples for both PHB and PHBHV polymer composites. An increase of about 152 and 73% in tensile strength and of 77 and 18% in strain at break was achieved for PHB and PHBHV polymers, respectively. As a result of X-ray diffraction analysis, exfoliated structure was achieved at low clay loaded sample (1% w/w), however at higher concentration (3% w/w) the structure found as intercalated. Therefore, it is an evident that enhancement of characteristic properties highly depend on the dispersion level of clay particles in polymer matrix. The results obtained in this study show the feasibility of improvement of the properties of PHB based polymers with incorporation of nanoclay.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Degradation Study of Biobased Polyester–Polyurethane and its Nanocomposite Under Natural Soil Burial, UV Radiation and Hydrolytic-Salt Water Circumstances

The current study focuses on the development of a formulation of polyester polyurethane (PEPU) samples using castor oil (CO) modified polyester polyol and partially biobased aliphatic isocyanate. The CO modified polyester polyol was synthesized employing transesterification reaction between CO and diethylene glycol in the presence litharge (PbO) catalyst. Subsequently, the modification of CO was confirmed using proton nuclear magnetic resonance ({sup 1}HNMR) spectra analysis. In the next stage, the biobased polyester polyurethane nanocomposites (PEPUNC) were prepared by incorporating 3 wt% OMMT nanoclay within PEPU through in situ polymerization technique. The produced PEPU was confirmed by Fourier transform infrared spectroscopy (FTIR) and {sup 1}HNMR spectra analysis. Further, the degradation properties of developed PEPU subjected to soil-burial, UV exposure and hydrolytic-salt water medium were noted by FTIR spectroscopy. Corresponding weight loss, mechanical measurements and morphological studies through scanning electron microscopy (SEM) analysis were studied. The results showed that the addition of OMMT nanoclay within the PEPU matrix produces significant improvement in the degradation rate which indicated the susceptibility of OMMT nanoclay to humidity upon exposure to soil burial. The produced microorganisms from the soil resulted in significant chemical and morphological changes in the entire structure of the PEPU. Additionally, the highest degradation and percentage of weight loss was observed under soil burial as compared to UV exposure and hydrolytic-salt water medium.

77 NANOSCIENCE AND NANOTECHNOLOGY↗