Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Modeling Simulation and Optimization of a Pressure Relief Feature in a Hermetically Sealed Volume Exposed to Abnormal Thermal Environments

This project investigates the behavior of a venting feature on a hermetically sealed volume under abnormal thermal environments. A pressure profile is used to simulate internal pressure build up due to thermal decomposition of foam caused by temperatures approaching 800K. For the purposes of his scoping study a small can composed of 304L stainless steel is used to emulate the problem at hand and simplify the model. The venting feature can be described as an elliptical thinned area with X-like scoring marks on the circumferential surface of the can where the highest stresses are located without the feature. The feature variables include elliptical size, depth, and quantity to optimize the venting feature geometry to vent at a desired pressure range. Cubit, SIERRA: Solid Mechanics, and Ensight modeling programs are used to simulate and analyze several iterations of this feature to determine the most optimal geometry. The model indicates through the simulations that the feature does in fact vent in a predictable manner and can be used in a variety of pressure vessel applications where uncontrolled over pressurizations are undesirable. Future work includes model validation tests, looking at different geometries, and using a more accurate failure criterion.

42 ENGINEERING↗

Chapter 9. Control of Accountable Sealed Radioactive Sources (ASRSs) and Radioisotope Thermoelectric Generators (RTGs)

This chapter describes the processes that Members of the Workforce (MOW) follow to control Accountable Sealed Radioactive Sources (ASRSs) and Radioisotope Thermoelectric Generators (RTGs). It also describes the Sandia National Laboratories (SNL) program for implementing the ASRS requirements in 10 CFR 835.1202 and the ASRS and RTG requirements in DOE 0 231.1B.

07 ISOTOPE AND RADIATION SOURCES↗

Sealed Vessel Leak Test [Slides]

A test plan has been developed to verify the results obtained from sealed vessels used in support of the JT5-Alt370-IN-1 compatibility testing. The test plan needs to be verified by doing a mock test on testing vessels, it will be adjusted and redone as necessary then conducted on the remaining vessels from the compatibility tests.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lambda Plate Seal for HFVMTF Anticryostat

Fermilab is currently designing a High Field Vertical Magnet Test Facility in order to test superconducting cables and magnets. The goal of this project was to analyze the thermal performance of three different seal designs and provide recommendations for the HFVMTF.

Gasior, Brett↗

Engineering Evaluation of Barium Buildup in a Decayed CsCl Sealed Source and Potential Impact for Cesium Release from a Breached Source

For more than 50 years, radioactive 137 Cs has been a major source material for radioactive sealed sources, usually constructed as cesium chloride (CsCl) salt loaded into double-walled, stainless-steel capsules. A complication develops as 137 Cs decays to 137 Ba since this process creates a strongly reducing environment inside the capsule. A potential hazard exists if the capsule is breached and air ingress induces rapid exothermic oxidation, and this mechanism is suspected to be responsible for the well-known contamination incident at the Harbor View facility in Washington state. For this study, many thermodynamic evaluations were performed to assess the internal state of capsules after several decades of decay and to describe the potential oxidation if the capsule contents were to suddenly be exposed to air. Results suggest that reduction of impurities such as Cu, Fe, Pb, and Cr to metal will occur. If these impurities are lacking, it is possible that even Ba metal will form. In most cases, rapid oxidation can occur, and the exothermic reactions are sufficient to vaporize portions of the contents, which would include the remaining 137 Cs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

H-Canyon Jumper Gasket Sealing Evaluation

H-Canyon Documented Safety Analysis approved December 2019 credits the leak integrity of HCanyon (HCA) process tanks, piping, and jumpers in preventing the release of radioactive material in a post seismic environment. Demonstration of leak tightness capability for this equipment was achieved through substantial analytical effort. However, one potential weak point that affects leak integrity exists at the gasketed joint between Hanford Connectors (HC) and nozzles. Review of the HCA Crane Log over a three-year period indicates the HCs periodically leak. Savannah River National Laboratory (SRNL) was requested to perform gasket compression tests that evaluate gasket relaxation characteristics, i.e., creep, and provide improvements to the HC installation process that can reduce or eliminate the frequency of leaks at HCs. A HC torque value of 312 ft-lbf is the target value used because it is the minimum torque value, with 95% confidence, when an unlubricated HC is impacted for standard sealing period of 9 seconds.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summary of Forensic Examinations in Support of Breach Sealed Source Event at Harborview Medical Facility on 2 May 2019

On May 2, 2019, International Isotopes, Inc. (INIS), a subcontractor to Triad National Security, LLC (contractor for Los Alamos National Laboratory) breached a sealed radioactive source containing ~2800 Ci of the radioactive isotope cesium-137 ( 137 Cs) at the University of Washington Harborview Research and Training (HRT) Building in downtown Seattle while attempting to recover the source for the National Nuclear Security Administration’s (NNSA’s) Off-site Source Recovery Program (OSRP). The breach of the source resulted in the contamination of 13 personnel, all 7 floors of the building, and a release of material to the environment. A summary of root and contributing causes of the event was investigated and published by a joint investigation team (JIT) co-led by NNSA and Triad National Security, LLC. That investigation was supported by forensics examinations provided by Pacific Northwest National Laboratory. This report summarizes the results of those forensic examinations.

61 RADIATION PROTECTION AND DOSIMETRY↗

Additive Manufacturing of Leak-Free Metal Components with Thin Walls and Sealing Surfaces

Laser-powder bed fusion (L-PBF) offers the ability to print free form design components which often do not require post-processing. However, challenges arise when printing small geometries with mating surfaces. Using an AddUp FormUp 350 L-PBF machine installed at the Manufacturing Demonstration Facility (MDF) of Oak Ridge National Laboratory (ORNL), a User Agreement project was formed with intent to manufacture metal leak-free cylindrical sealing surfaces. One print of twelve 12.7mm outer diameter (OD) cylinders was designed varying wall thickness in the computer-aided design (CAD) model. A build plate was successfully printed but included two build pauses each adding about five minutes per layer. The build plate of 12 cylinders was removed from the chamber and shipped to the partner.

36 MATERIALS SCIENCE↗

Next-generation perovskite photovoltaics: improving, stabilizing, and lead-sealing of record-setting laboratory solar cells towards commercialization

Summary: In the proposed program we plan to improve perovskite photovoltaic performance by developing (1) orientational control of 3D/2D perovskite heterostructures to simplify device architectures, thus improving device efficiencies and stability; (2) high-throughput optical measurements and real-time device simulations for device optimization; (3) robust, dual-pronged lead-sealing and oxygen/moisture/UV barrier films for long-term stability. Specifically, we seek to develop an in-depth understanding of the perovskite film formation, interface passivation, device stability, and environmentally friendly encapsulation, which together will lead to perovskite devices with PCE of over 28%, stability of T80 at 85/85 (85% humidity at 85 degrees C) for 10,000, expected to be equivalent to T90 of 100 hours), and architectures that would satisfy the U.S. EPA and RoHS limits of lead-leaching. The knowledge generated with this project will be applicable to tandem devices with wider-bandgap perovskites.

14 SOLAR ENERGY↗