Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Robust optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Minimum information modelling of structural systems with uncertain parameters

Work is reviewed wherein the design of active structural control is formulated as the mean-square optimal control of a linear mechanical system with stochastic parameters. In practice, a complete probabilistic description of model parameters can never be provided by empirical determinations, and a suitable design approach must accept very limited a priori data on parameter statistics. In consequence, the mean-square optimization problem is formulated using a complete probability assignment which is made to be consistent with available data but maximally unconstrained otherwise through use of a maximum entropy principle. The ramifications of this approach for both robustness and large dimensionality are illustrated by consideration of the full-state feedback regulation problem.

Hyland, D. C.↗

Parameter identification for a robotic manipulator arm

The development is described of a nonlinear dynamic model for large oscillations of a robotic manipulator arm about a single joint. Optimization routines are formulated and implemented for the identification of electrical and physical parameters from dynamic data taken from an industrial robot arm. Special attention is given to the role of sensitivity in the formulation of robust models of this motion. The importance of actuator effects in the reduction of sensitivity is established and used to develop an electromechanical model of the manipulator system.

Brewer, D. W.↗

Autonomous landing on Mars

Long communication times between earth and Mars demand autonomous landing capabilities. If high-resolution imagery acquired from an orbiter is available to select and certify a specific safe landing site or sites, navigational updates relative to the surface can be used to achieve the necessary accuracy to land within these certified sites. Autonomous registrations of the orbiter's imagery with photographs of the landing area taken by the lander during descent can provide the necessary accuracy and robustness. If orbital imagery is not available, autonomous hazard recognition and avoidance will be required to guide the lander to a hazard-free site. Feature extraction and matching algorithms, applied to visible light imagery and optimized to the terrain discovered by the Viking landers, can provide both an accurate surface-relative navigational update capability and a hazard recognition capability.

Stevenson, John↗

Integration of the Response Surface Methodology with the Compromise Decision Support Problem in Developing a General Robust Design Procedure

In this paper we introduce a comprehensive and rigorous robust design procedure to overcome some limitations of the current approaches. A comprehensive approach is general enough to model the two major types of robust design applications, namely, robust design associated with the minimization of the deviation of performance caused by the deviation of noise factors (uncontrollable parameters), and robust design due to the minimization of the deviation of performance caused by the deviation of control factors (design variables). We achieve mathematical rigor by using, as a foundation, principles from the design of experiments and optimization. Specifically, we integrate the Response Surface Method (RSM) with the compromise Decision Support Problem (DSP). Our approach is especially useful for design problems where there are no closed-form solutions and system performance is computationally expensive to evaluate. The design of a solar powered irrigation system is used as an example. Our focus in this paper is on illustrating our approach rather than on the results per se.

Chen, Wei↗

Modeling of High Speed Reacting Flows: Established Practices and Future Challenges

Computational fluid dynamics (CFD) has proven to be an invaluable tool for the design and analysis of high- speed propulsion devices. Massively parallel computing, together with the maturation of robust CFD codes, has made it possible to perform simulations of complete engine flowpaths. Steady-state Reynolds-Averaged Navier-Stokes simulations are now routinely used in the scramjet engine development cycle to determine optimal fuel injector arrangements, investigate trends noted during testing, and extract various measures of engine efficiency. Unfortunately, the turbulence and combustion models used in these codes have not changed significantly over the past decade. Hence, the CFD practitioner must often rely heavily on existing measurements (at similar flow conditions) to calibrate model coefficients on a case- by-case basis. This paper provides an overview of the modeled equations typically employed by commercial- quality CFD codes for high-speed combustion applications. Careful attention is given to the approximations employed for each of the unclosed terms in the averaged equation set. The salient features (and shortcomings) of common models used to close these terms are covered in detail, and several academic efforts aimed at addressing these shortcomings are discussed.

Baurle, R. A.↗

Solar Pumped High Power Solid State Laser for Space Applications

Highly coherent laser light provides a nearly optimal means of transmitting power in space. The simplest most direct means of converting sunlight to coherent laser light is a solar pumped laser oscillator. A key need for broadly useful space solar power is a robust solid state laser oscillator capable of operating efficiently in near Earth space at output powers in the multi hundred kilowatt range. The principal challenges in realizing such solar pumped laser oscillators are: (1) the need to remove heat from the solid state laser material without introducing unacceptable thermal shock, thermal lensing, or thermal stress induced birefringence to a degree that improves on current removal rates by several orders of magnitude and (2) to introduce sunlight at an effective concentration (kW/sq cm of laser cross sectional area) that is several orders of magnitude higher than currently available while tolerating a pointing error of the spacecraft of several degrees. We discuss strategies for addressing these challenges. The need to remove the high densities of heat, e.g., 30 kW/cu cm, while keeping the thermal shock, thermal lensing and thermal stress induced birefringence loss sufficiently low is addressed in terms of a novel use of diamond integrated with the laser material, such as Ti:sapphire in a manner such that the waste heat is removed from the laser medium in an axial direction and in the diamond in a radial direction. We discuss means for concentrating sunlight to an effective areal density of the order of 30 kW/sq cm. The method integrates conventional imaging optics, non-imaging optics and nonlinear optics. In effect we use a method that combines some of the methods of optical pumping solid state materials and optical fiber, but also address laser media having areas sufficiently large, e.g., 1 cm diameter to handle the multi-hundred kilowatt level powers needed for space solar power.

Fork, Richard L.↗

A Practical Approach to Obstacle Field Route Planning for Unmanned Rotorcraft

Autonomous helicopter operations in the near-earth environment will require robust and efficient obstacle field route planning. A method for obstacle field route planning is presented, which is composed of a mesh generation phase, a graph search phase, and a route refinement phase. The method mixes optimization and heuristics to obtain a satisfactory solution quickly. Simulations based on an unmanned helicopter model are presented.

Howlet, Jason K.↗

Simultaneous Retrieval of Aerosol and Surface Optical Properties from Combined Airborne- and Ground-Based Direct and Diffuse Radiometric Measurements

This paper presents a new method for simultaneously retrieving aerosol and surface reflectance properties from combined airborne and ground-based direct and diffuse radiometric measurements. The method is based on the standard Aerosol Robotic Network (AERONET) method for retrieving aerosol size distribution, complex index of refraction, and single scattering albedo, but modified to retrieve aerosol properties in two layers, below and above the aircraft, and parameters on surface optical properties from combined datasets (Cloud Absorption Radiometer (CAR) and AERONET data). A key advantage of this method is the inversion of all available spectral and angular data at the same time, while accounting for the influence of noise in the inversion procedure using statistical optimization. The wide spectral (0.34-2.30 m) and angular range (180 ) of the CAR instrument, combined with observations from an AERONET sunphotometer, provide sufficient measurement constraints for characterizing aerosol and surface properties with minimal assumptions. The robustness of the method was tested on observations made during four different field campaigns: (a) the Southern African Regional Science Initiative 2000 over Mongu, Zambia, (b) the Intercontinental Transport Experiment-Phase B over Mexico City, Mexico (c) Cloud and Land Surface Interaction Campaign over the Atmospheric Radiation Measurement (ARM) Central Facility, Oklahoma, USA, and (d) the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) over Elson Lagoon in Barrow, Alaska, USA. The four areas are dominated by different surface characteristics and aerosol types, and therefore provide good test cases for the new inversion method.

Gatebe, C. K.↗

Two Decades Observing Smoke Above Clouds in the South-Eastern Atlantic Ocean: Deep Blue Algorithm Updates and Validation with ORACLES Field Campaign Data

This study presents and evaluates an updated algorithmfor quantification of absorbing aerosols above clouds(AACs) from passive satellite measurements. The focus isbiomass burning in the south-eastern Atlantic Ocean duringthe 2016 and 2017 ObseRvations of Aerosols above CLoudsand their intEractionS (ORACLES) field campaign deployments.The algorithm retrieves the above-cloud aerosoloptical depth (AOD) and underlying liquid cloud opticaldepth and is applied to measurements from the Sea-viewingWide Field-of-view Sensor (SeaWiFS), Moderate ResolutionImaging Spectroradiometer (MODIS), and Visible InfraredImaging Radiometer Suite (VIIRS) from 1997 to 2017. AirborneNASA Ames Spectrometers for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) and NASA LangleyHigh Spectral Resolution Lidar 2 (HSRL2) data collectedduring ORACLES provide important validation for spectralAOD for MODIS and VIIRS; as the SeaWiFS missionended in 2010, it cannot be evaluated directly. The 4STARand HSRL2 comparisons are complementary and reveal performancegenerally in line with uncertainty estimates providedby the optimal estimation retrieval framework used. Atpresent the two MODIS-based data records seem the mostreliable, although there are differences between the deployments,which may indicate that the available data are not yetsufficient to provide a robust regional validation. Spatiotemporalpatterns in the data sets are similar, and the time seriesare very strongly correlated with each other (correlationcoefficients from 0.95 to 0.99). Offsets between the satellitedata sets are thought to be chiefly due to differences in absolutecalibration between the sensors. The available validationdata for this type of algorithm are limited to a small numberof field campaigns, and it is strongly recommended that suchairborne measurements continue to be made, both over thesouthern Atlantic Ocean and elsewhere.

Sayer, Andrew M.↗

Synthetic Hyperspectral Data for Global Water Quality Algorithm Development

Eutrophication and increasing prevalence of potentially toxic algal blooms (cyanoHABs) among global inland water bodies have become a major ecological concern and require direct attention. There is now a growing necessity to develop pragmatic approaches that allow timely and effective extrapolation of local aquatic processes, to spatially resolved global products. Planned aquatic biogeochemistry remote sensing data products from hyperspectral imagers such as NASA’s Surface Biology and Geology (SBG) mission and relevant aquatic sensor sensitivity precursor airborne imaging spectrometer data provide unprecedented radiometric resolution and sensor sensitivity for characterizing complex aquatic ecosystems. However, scarcity of high-quality freshwater in-situ optical data hinders our capability to develop and validate robust retrieval algorithms. A state-of-the-art synthetic dataset of paired top-of-atmosphere, bottom-of-atmosphere, and optical and biogeophysical data was developed through radiative transfer modeling to simulate natural freshwater ecosystems. A synthetic or precursor dataset for SBG is being used to train robust machine learning models to derive water quality products pertinent to SBG mission objectives. The dataset is also used to show the potential of performing vigorous aquatic sensitivity studies and explored pathways for how best to optimize hyperspectral data for machine learning development. A processing pipeline and resultant global synthetic/precursor dataset for inland waters is presented to establish the innovation for water quality studies of inland waters globally. Optical Society of America Imaging and Applied Optics Congress, Hyperspectral Imaging and Sounding of the Environment (OSA HISE) Meeting, 19-23 July 2021, Virtual Meeting, https://www.osa.org/enus/meetings/osa_meetings/optical_sensors_and_sensing_congress/program/hyperspectral_imaging_and_sounding_of_the_environm/

Synthetic↗

Gust Load Alleviation Control and Gust Estimation for a High Aspect Ratio Wing Wind Tunnel Model

This paper presents the gust load alleviation (GLA) study of the aspect ratio 13.5 Common Research Model (CRM) wind-tunnel model. This study details the design of the GLA controller in preparation for wind-tunnel testing in the Transonic Dynamics Tunnel at NASA Langley Research Center. An aeroservolastic (ASE) model is first reduced using a model reduction method that takes advantage of the sinusoidal steady-state response. Then, the reduced model is used to design an extended-state Kalman filter which estimates the states and the sinusoidal gust input. The GLA control is then derived using the optimal control solution to a multi-objective cost function. The results of the GLA controller indicate a 69.07% reduction in wing-root strain without sensor noise and 68.45% reduction with sensor noise, while maintaining robust stability margins. An adaptive GLA controller is developed for uncertain gust frequency and shows a 71.03% reduction in wing root strain compared to the non-adaptive control reduction of just 39.19%.

Christopher Forte↗

NREL's Capabilities in Organism Development and Fermentation Sciences Research and Development (R&D)

NREL is developing robust microbial strains and scalable fermentation technologies for converting biomass sugars to fuels and biochemicals, and one-carbon (C1) gaseous substrates (e.g., CO2, CO, CH4) to high-value products. Core capabilities include: (1) Fermentation optimization of aerobic, microaerophilic, and anaerobic cultivation processes of gas and traditional liquid fermentation R&D; (2) Gas mass transfer R&D and CFD modeling for improved reactor design and gas mixing (3) Metabolic engineering in CRISPR editing tools to improve titer, rates, and yields; (4) Probing and optimizing carbon, redox, and energy flux using transcriptomics and fluxomic techniques; and (5) Consolidated bioprocessing (CBP) using cellulose and hemicellulose directly to minimize pretreatment.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS,SYNTHETIC ↗

Enabling the broader adoption of fusion simulation on complex geometry

This project addressed a key barrier to advanced fusion and nuclear simulation: the difficulty of performing high-fidelity Monte Carlo neutronics directly on complex, real-world CAD geometry. Traditional workflows require engineers to rebuild CAD models as simplified constructive solid geometry, a time-consuming and error-prone process that limits design iteration and broader adoption of simulation tools. The goal of this Phase I SBIR was to make CAD-based neutronics practical, accessible, and robust for industrial and research users. During the project, Coreform significantly enhanced the Direct Accelerated Geometry Monte Carlo (DAGMC) workflow and fully integrated it into Coreform Cubit as a first-class capability. Major achievements include optimized material assignment and surface meshing workflows, substantial performance improvements to geometry imprinting and preparation, native export of DAGMC models, and new visualization tools to support OpenMC source definition and lost-particle debugging. Coreform also expanded Cubit’s capabilities as a full OpenMC preprocessor, including the ability to convert OpenMC constructive solid geometry models back into CAD for visualization, multiphysics coupling, and debugging. In collaboration with Argonne National Laboratory, the project delivered comprehensive new DAGMC documentation and training materials, transforming DAGMC from a research-oriented tool into a production-ready workflow. Results were disseminated through tutorials, conference training, and multiple well-attended webinars demonstrating integrated CAD-based neutronics and multiphysics workflows. Overall, this project demonstrated that high-fidelity Monte Carlo simulations can be performed directly on complex CAD geometry, reducing setup time, improving usability, and enabling faster, more informed design decisions for fusion and nuclear energy systems.

42 ENGINEERING↗

Multi-plane moment-of-fluid interface reconstruction in 3D

Moment-of-fluid (MOF) methods for interface reconstruction approximate the region occupied by material in each mesh element only through reference to its geometric moments. Here, we present a 3D MOF method that represents the material (POM) in each cell as the convex intersection of the cell and multiple half-spaces, each selected to minimize the least-squares error between computed moments of the approximated material and provided reference moments. This optimization problem is highly non-linear and non-convex, making the numerical result very sensitive to the initial guess. To create an effective initial guess in each cell, we construct an ellipsoid from 0th–2nd order reference moments such that its shape corresponds with that of the POM. Within this ellipsoid we inscribe a polyhedron, and initialize the minimization problem with the half-spaces defined by each of its faces. The inscribed polyhedron has minimally 4 faces, and using up to 3rd order moments permits optimization over up to 20 unknown values. We therefore define MOF methods that utilize 4, 5, or 6 half-spaces, correspondingly initialized with the faces of a single inscribed tetrahedron, triangular prism, or hexahedron. Stability of the non-linear optimization is further improved with a prepossessing step that normalizes the reference moments according to the axes of the reference ellipsoid. Using this approach, the non-linear least-squares solver reliably converges to a near-global minimum from a single initial guess. We demonstrate accuracy and robustness using single-cell and multi-cell examples over a wide spectrum of geometry. In particular, we demonstrate our ability to exactly reproduce several important and complex features defined by up to four half-spaces, such as corners, filaments, filament tips, and embedded material in the cell.

3D interface reconstruction↗

MimicGAN: Robust Projection onto Image Manifolds with Corruption Mimicking

In the past few years, Generative Adversarial Networks (GANs) have dramatically advanced our ability to represent and parameterize high-dimensional, non-linear image manifolds. As a result, they have been widely adopted across a variety of applications, ranging from challenging inverse problems like image completion, to problems such as anomaly detection and adversarial defense. A recurring theme in many of these applications is the notion of projecting an image observation onto the manifold that is inferred by the generator. In this context, Projected Gradient Descent (PGD) has been the most popular approach, which essentially optimizes for a latent vector that minimizes the discrepancy between a generated image and the given observation. However, PGD is a brittle optimization technique that fails to identify the right projection (or latent vector) when the observation is corrupted, or perturbed even by a small amount. Such corruptions are common in the real world, for example images in the wild come with unknown crops, rotations, missing pixels, or other kinds of non-linear distributional shifts which break current encoding methods, rendering downstream applications unusable. To address this, we propose corruption mimicking—a new robust projection technique, that utilizes a surrogate network to approximate the unknown corruption directly at test time, without the need for additional supervision or data augmentation. The proposed method is significantly more robust than PGD and other competing methods under a wide variety of corruptions, thereby enabling a more effective use of GANs in real-world applications. Finally, more importantly, we show that our approach produces state-of-the-art performance in several GAN-based applications—anomaly detection, domain adaptation, and adversarial defense, that benefit from an accurate projection.

97 MATHEMATICS AND COMPUTING↗

Temperature Dependent Spin Dynamics in La 0.67 Sr 0.33 MnO 3 /Pt Bilayers

Complex ferromagnetic oxides such as La 0.67 Sr 0.33 MnO 3 (LSMO) offer pathways for creating energy‐efficient spintronic devices with new functionalities. LSMO exhibits high‐temperature ferromagnetism, half metallicity, sharp resonance linewidth, low damping, and a large anisotropic magnetoresistance response. Combined with Pt, a proven material with high spin‐charge conversion efficiency, LSMO can be used to create robust nano‐oscillators for neuromorphic computing. Ferromagnetic resonance (FMR) and device‐level spin‐pumping FMR measurements are performed to investigate the magnetization dynamics and spin transport in NdGaO 3 (110)/LSMO(15 nm)/Pt(0 and 5 nm) thin films ranging from 300 K to 90 K and compare the device performance with Py(7 nm)/Pt(5 nm) sample. The spin current pumped into Pt is quantified to determine the temperature‐dependent influence of interfacial interactions. The generated spin current in the micro‐device is maximum at 170 K for the optimally grown LSMO/Pt films. Additionally, this bilayer system exhibits low magnetic Gilbert damping (0.002), small linewidth (12 Oe), and a large spin Hall angle (≈3.2%) at 170 K. Ex situ deposited LSMO/Pt bilayers demonstrate excellent dynamic response, exhibiting fourfold enhancement in signal output, eightfold reduction in damping, and a threefold reduction in linewidth as compared to the Pt/Py system. Such robust device‐level performance can pave way for energy‐efficient spintronic‐based devices.

complex perovskite thin films↗

Automation of the ICME Workflow Incorporating Material Digital Twins at Different Length Scales Within a Robust Information Management System

Recent successes in Integrated Computational Materials Engineering (ICME) have demonstrated the potential in designing fit-for-purpose materials for a given application in a cost and time efficient manner. However, the material design process must contain a level of automation in the material decision process, implementing some optimization algorithms, to truly enable the full benefits of ICME, particularly when considering materials at multiple length/time scales. In this work, we will demonstrate how the GRC ICME schema and Python framework automates a workflow that captures, analyzes, maintains, and disseminates the digital footprint in the context of tailoring resin material at the nanoscale of a woven composite Y-joint at the macroscale for an Aurora D8 double bubble fuselage. This digital footprint incorporates the interaction of both structural digital twins and material twins at various length scales.

Brandon L. Hearley↗

Dark Energy Survey Year 3 results: Cosmology from cosmic shear and robustness to data calibration

This work, together with its companion paper, Secco, Samuroff et al., presents the Dark Energy Survey Year 3 cosmic shear measurements and cosmological constraints based on an analysis of over 100 million source galaxies. With the data spanning 4143 deg 2 on the sky, divided into four redshift bins, we produce the highest significance measurement of cosmic shear to date, with a signal-to-noise of 40. We conduct a blind analysis in the context of the ΛCDM model and find a 3% constraint of the clustering amplitude, S 8 ≡ σ 8 (Ω m /0.3) 0.5 = 0.759$^{+0.025}_{-0.023}$. A ΛCDM-Optimized analysis, which safely includes smaller scale information, yields a 2% precision measurement of S 8 = 0.772$^{+0.018}_{-0.017}$ that is consistent with the fiducial case. The two low-redshift measurements are statistically consistent with the Planck Cosmic Microwave Background result, however, both recovered S 8 values are lower than the high-redshift prediction by 2.3σ and 2.1σ (ρ-values of 0.02 and 0.05), respectively. The measurements are shown to be internally consistent across redshift bins, angular scales and correlation functions. The analysis is demonstrated to be robust to calibration systematics, with the S 8 posterior consistent when varying the choice of redshift calibration sample, the modeling of redshift uncertainty and methodology. Similarly, we find that the corrections included to account for the blending of galaxies shifts our best-fit S 8 by 0.5σ without incurring a substantial increase in uncertainty. We examine the limiting factors for the precision of the cosmological constraints and find observational systematics to be subdominant to the modeling of astrophysics. Specifically, we identify the uncertainties in modeling baryonic effects and intrinsic alignments as the limiting systematics.

79 ASTRONOMY AND ASTROPHYSICS↗