Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

The Petrogenetic significance of Plagioclase megacrysts in Archean rocks

The petrogenetic significance of plagioclase megacryst-bearing Archean rocks was considered. It was suggested that these developed in mid-to upper-crustal magma chambers that were repeatedly replenished. Crystallization of megacrysts from a primitive liquid that evolves to an Fe-rich tholeiite (with LREE enrichment) is nearly isothermal and is an equilibrium process. Cumulates probably form near the margins of the chambers and liquids with megacrysts are periodically extracted and can appear as volcanics. Some flows and intrusives are found in arc-like settings in greenstone belts. Megacrystic dikes represent large volumes of melt and dike swarms such as the Metachawan swarm of Ontario suggest multiple sources of similar compositions. A complex series of melt ponding and migration are probable and involve large amounts of liquid.

Morrison, D. A.↗

A model of diffuse radar scattering from Martian surface rocks

Two physically plausible surface rock-orientation models are presently used to characterize the depolarized component of diffuse radar energy scattering on Mars, and plots of scattering cross-section are derived as a function of Doppler shift. The spectral shapes thus modeled exhibit similarities to observed spectra; their magnitudes are generally within a factor of about 2 of measured values. While surface inhomogeneities could account for the degree of discrepancy, subsurface element scattering may also be implicated.

Calvin, Wendy M.↗

High alumina (HA) and very high potassium (VHK) basalt clasts from Apollo 14 breccias. II - Whole rock geochemistry - Further evidence for combined assimilation and fractional crystallization within the lunar crust

The understanding of basalt petrogenesis at the Apollo 14 site has increased markedly due to the study of 'new' samples from breccia 'pull-apart' efforts. Whole-rock compositions of 26 new high alumina (HA) and 7 very high potassium (VHK) basalts emphasize the importance of combined assimilation and fractional crystallization in a lunar regime. Previously formulated models for HA and VHK basalt petrogenesis are modified in order to accomodate these new data, although modeling parameters are essentially the same. The required range in HA basalt compositions is generated by the assimilation of KREEP by a 'primitive' parental magma. The VHK basalts can be generated by three parental HA basalts assimilating granite. Results indicate that VHK basalt compositions are dominated by the parental magma, and only up to 8 percent granite assimilation is required. This modeling indicates that at least three VHK basalt flows must be present at the Apollo 14 site.

Neal, C. R.↗

Isotopic variations in the rock-forming elements in meteorites

Variations in isotopic abundances of the major rock-forming elements can be used as tracers for chemical processes in the solar nebula, and may also provide links to the presolar cloud from which the solar nebula was derived. The paper reviews recent developments involving meteoritic abundances of the isotopes of O, Mg, Si, Ca, Ti, Cr, Fe, and Ni). Some of the effects observed are due to mass-dependent fractionation, and some are due to interaction of isotopically distinct reservoirs, reflecting incomplete homogenization of materials with different nucleosynthetic histories.

Clayton, R. N.↗

Mechanics of graben formation in crustal rocks - A finite element analysis

The mechanics of the initial stages of graben formation are examined, showing that the configuration of a graben (a pair of antithetically dipping normal faults) is the most energetically favorable fault configuration in elastic-brittle rocks subjected to pure extension. The stress field in the vicinity of a single initial normal fault is computed with a two-dimensional FEM. It is concluded that the major factor controlling graben width is the depth of the initial fault.

Melosh, H. J.↗

Identification of lunar rock types and search for polar ice by gamma ray spectroscopy

This paper examines the possibility of mapping the surface composition of the moon from an orbiting spin-stabilized spacecraft, using gamma ray spectroscopy and a cooled germanium solid-state device as a detector. A design for accommodating the germanium detector gamma ray spectrometer was devised, and the detection sensitivity was applied to typical lunar-rock compositions. For sets comprising nine highland and 16 mare types, the most useful elements were found to be Mg, Al, K, Ti, Fe, U, and Th. An analysis of the expected instrument response to the gamma ray and neutron fluxes of water ice indicated that a neutron mode added to the spectrometer will be more sensitive than the gamma ray mode to the possible presence of polar ice. It was calculated that, with a pair of selected neutron absorbers and a model which provides that 2.5 percent of the area above 75-deg latitude is occupied by trapping sites, the instrument will provide a 1-yr mission detection limit of 0.056 percent H2O by weight for each polar region.

Metzger, Albert E.↗

An experimental study of the nonlinear dynamic phenomenon known as wing rock

An experimental investigation into the physical phenomena associated with limit cycle wing rock on slender delta wings has been conducted. The model used was a slender flat plate delta wing with 80-deg leading edge sweep. The investigation concentrated on three main areas: motion characteristics obtained from time history plots, static and dynamic flow visualization of vortex position, and static and dynamic flow visualization of vortex breakdown. The flow visualization studies are correlated with model motion to determine the relationship between vortex position and vortex breakdown with the dynamic rolling moments. Dynamic roll moment coefficient curves reveal rate-dependent hysteresis, which drives the motion. Vortex position correlated with time and model motion show a time lag in the normal position of the upward moving wing vortex. This time lag may be the mechanism responsible for the hysteresis. Vortex breakdown is shown to have a damping effect on the motion.

Arena, A. S., Jr.↗

Primary igneous rocks on Mars: Composition and distribution

The present knowledge of the crustal composition of Mars is synthesized and implications discussed for in-situ resource utilization. Sources of information include remote sensing observations, Viking XRF chemical measurements, and characteristics of the SNC meteorites (which most researchers now believe originated on Mars). There are a number of lines of evidence that abundant ferrous-iron rich igneous crustal rocks (and derivative soils) are available at or very near the current Martian surface at many locations on the planet. Most of these exposures show spectroscopic evidence for abundant pyroxene, consistent with basaltic compositions. The SNC meteorites, which have basaltic compositions, were also studied extensively. Interpretations of Mars crustal chemistry and mineralogy (petrology) based on these various sources are reviewed, and their consistencies and differences are discussed.

Singer, Robert B.↗

Nature and origin of secondary mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs Wash volcanic centers, southern, Nevada

The following subject areas are covered: (1) genetic, spectral, and LANDSAT Thematic Mapper imagery relationship between desert varnish and tertiary volcanic host rocks, southern Nevada; (2) reconnaissance geologic mapping of the Kane Springs Wash Volcanic Center, Lincoln County, Nevada, using multispectral thermal infrared imagery; (3) interregional comparisons of desert varnish; and (4) airborne scanner (GERIS) imagery of the Kane Springs Wash Volcanic Center, Lincoln County, Nevada.

Taranik, James V.↗

Dynamic tensile-failure-induced velocity deficits in rock

Planar impact experiments were employed to induce dynamic tensile failure in Bedford limestone. Rock disks were impacted with aluminum and polymethyl methacralate (PMMA) flyer plates at velocities of 10 to 25 m/s. Tensile stress magnitudes and duration were chosen so as to induce a range of microcrack growth insufficient to cause complete spalling of the samples. Ultrasonic P- and S-wave velocities of recovered targets were compared to the velocities prior to impact. Velocity reduction, and by inference microcrack production, occurred in samples subjected to stresses above 35 MPa in the 1.3 microsec PMMA experiments and 60 MPa in the 0.5 microsec aluminum experiments. Using a simple model for the time-dependent stress-intensity factor at the tips of existing flaws, apparent fracture toughnesses of 2.4 and 2.5 MPa sq rt m are computed for the 1.3 and 0.5 microsec experiments. These are a factor of about 2 to 3 greater than quasi-static values. The greater dynamic fracture toughness observed may result from microcrack interaction during tensile failure. Data for water-saturated and dry targets are indistinguishable.

Rubin, Allan M.↗

Magnetic beneficiation of highland and hi-Ti mare soils - Rock, mineral, and glassy components

The exploitation of lunar soil can provide valuable raw materials for in situ resource utilization at a lunar base. A study of magnetic characterization was undertaken of three mare and two highland soils obtained from NASA. Beneficiation of mare and highland soils by sizing and magnetic separation can effectively concentrate the important components of the soils (e.g., ilmenite, native Fe, plagioclase, and aggluminates). As a soil matures and the impact melts consume additional minerals and rocks, the modal percentage of the minerals will decrease. The 'normative' percentage will become much greater than the modal percentage. Therefore, greater efficiency of separation can be realized with the proper selection of maturity of the soil, as well as by secondary grinding to further liberate specific minerals from lithic fragments (e.g., ilmenite and plagioclase).

Taylor, Lawrence A.↗

Conical Euler simulation of wing rock for a delta wing planform

Unsteady, vortex-dominated flowfields are presently studied by using the conical Euler equations as an efficient first step toward investigation of the full three-dimensional problem, under the assumption that the supersonic flow about a delta wing is conical and therefore allows the three-dimensional problem to be reduced to a two-dimensional one. Attention is given to the case of a delta wing undergoing wing-rock motion. The code developed has also been modified to allow treatment of the 'free-to-roll' case.

Lee, Elizabeth M.↗

Pristine moon rocks - Apollo 17 anorthosites

New chemical analyses and petrographic descriptions for 10 previously unanalyzed Apollo 17 rock samples are provided. Attention is focused on several that appear to be pristine. All samples were analyzed in INAA using a procedure based on that of Kallemeyn et al. (1989). One sample was found to be unambiguously pristine, and is the first pristine ferroan-anorthositic suite (FAS) sample from Apollo 17. It exhibits extremely low-mg(asterisk) mafic silicates, coupled with relatively sodic plagioclase. It has an unusually high augite/low-Ca pyroxene ratio and contains incompatible trace elements at levels unprecedentedly high compared to FAS anorthosites from the Apollo 14, 15, 16 sites. It is inferred that 74114.5, and Apollo 17 anorthosites in general, formed at a relatively late stage in the evolution of the primordial magmasphere.

Warren, P. H.↗

Effects of leading-edge flap oscillation on unsteady delta wing flow and rock control

The isolated and interdisciplinary problems of unsteady fluid dynamics and rigid-body dynamics and control of delta wings with and without leading-edge flap oscillation are considered. For the fluid dynamics problem, the unsteady, compressible, thin-layer Navier-Stokes (NS) equations, which are written relative to a moving frame of reference, are solved along with the unsteady, linearized, Navier-displacement (ND) equations. The NS equations are solved for the flowfield using an implicit finite-volume scheme. The ND equations are solved for the grid deformation, if the leading-edge flaps oscillate, using an ADI scheme. For the dynamics and control problem, the Euler equation of rigid-body rolling motion for a wing and its flaps are solved interactively with the fluid dynamics equations for the wing-rock motion and subsequently for its control. A four-stage Runge-Kutta scheme is used to explicitly integrate the dynamics equation.

Kandil, Osama A.↗

Cosmic ray produced Be-10 and Al-26 in Antarctic rocks - Exposure and erosion history

Cosmic-ray produced Be-10 and Al-26 were measured in purified quartz fractions of selected rock samples from Antarctic mountains. From these data, mean erosion rates were calculated for the limiting case of steady-state surface exposure to cosmic rays, and minimum exposure ages, for the limiting case of no erosion. Calculated mean erosion rates are very low, on the order of a few times 0.00001 cm/yr; the sampling is believed to be sufficient to generalize this result to exposed bedrock in Antarctica. In favorable cases it is possible to distinguish between the limiting cases; steady-state erosion seems a better description in such cases. Most samaples, including some taken a few meters above the present ice level, seem to have been exposed for millions of years, without major episodes of burial or abrasion by ice.

Nishiizumi, K.↗

Comparison of drift potential derived from Mars GCM with rock abundance from IRTM

A General Circulation Model (GCM) for Mars developed at the Ames Research Center makes global predictions of wind shear stress as a function of season and dust optical depth. The surface shear stress, pressure and temperature from the GCM are used here to calculate the drift potential, or the amount of sediment that could be moved by the wind. A map of sand roses based on the calculations was generated for comparison with predictions of the distribution of rocks on Mars from Christensen, which is derived from infrared thematic mapper (IRTM) data. The drift potential was defined for Earth as the amount of sand moved at a given place for a stated period of time, and was adapted here for Mars.

Xu, Pengyang↗

TEM studies of a circumstellar rock

Reported here is the discovery of crystals of titanium carbide in a grain of silicon carbide which formed as a circumstellar dust particle in the atmosphere of a carbon-rich star. Just as in the case of terrestrial rocks, whose assemblage of minerals gives us clues to the composition and conditions of the environment in which they formed, the titanium carbide crystals and their textural relationship to the silicon carbide give us important clues to the nature of the stellar atmosphere in which they formed. From microscopic studies of the relationships between the atomic planes of the silicon carbide and the titanium carbide, we can show that the titanium carbide cannot have existed as already-formed crystals in a gas around which silicon carbide subsequently condensed. An alternative possibility is that both minerals grew quickly and simultaneously from condensing gas in the rapidly cooling and expanding stellar atmosphere. Other microscopic features of the silicon carbide, such as abundant atomic layer disorder and crystal twinning, similarly suggest rapid grain growth. However, another possibility is that the titanium carbide grew inside of the silicon carbide by diffusion of titanium atoms. Our calculations suggest that this scenario is less likely, given the relatively short times (a year or less) for which stellar condensates can be expected to be exposed to temperatures high enough to make diffusion sufficiently rapid.

Bernatowicz, Thomas J.↗

Three-dimensional simulation of slender delta wing rock and divergence

Computational simulation of three-dimensional flows around a delta wing undergoing rock and roll-divergence motions is presented. The problem is a multidisciplinary one where fluid-dynamics equations and rigid-body-dynamics equations are sequentially solved. For the fluid-dynamics part, the unsteady Euler equations, which are written relative to a moving frame of reference, are solved using an implicit, approximately-factored, central-difference, finite-volume scheme. For the rigid-body dynamics part, the Euler equation of rigid-body rolling motion is solved using a four-stage Runge-Kutta scheme. Since the applications do not include deforming wings or relative-rigid-body motions, the computational-fluid-dynamics grid, which is fixed in the moving frame of reference, does not need to be updated once it is generated.

Kandil, Osama A.↗